Wuhan Jie Swisu Mechanical & Electerical Co. Ltd

hubei, China

• MOQ 1 Set(s)
• very simple save woking time and cost
• fully automatic aerosol filling machinehigh quality

• MOQ 1 Set(s)

Powder filling machine can choose screw type automatic quantitative packing machine Or vibrating type automatic quantitative packing machine.Screw type automatic quantitative packing machine is a collection of photoelectric sensors, electronic weighing, stepper motor control in one of the packaging equipment, the machine applies to flour, milk powder, superfine powder to small particle materials automatic quantitative packaging.Vibration type packing machine for granular, liquidity, good material and design of packaging machinery. Do not destroy the particles, using electronic weighing, ensure accuracy; and can be widely applied to washing powder, seeds, MSG, chicken essence and so on need for quantitative packaging of various industries

• MOQ 1 Set(s)

Horizontal powder production equipment so that the maximum range of agitator in the barrel body turning materials. The materials in the barrel body convective circulation, shear mixing, completing the material in a relatively short time rapid and uniform mixing.Equipment and material contact parts are all made of 304 stainless steel production can also be based on customer requirements with ordinary carbon steel production. the powder production and processing of raw materials. Various powder can also be used to add the spray liquid component, the formation of granular.

• MOQ 1 Set(s)

Paste mixing reactor Ointment emulsification device uses vacuum homogeneous. Vacuum homogenizing machine is a liquid material health homogenization based, transportation of raw materials to the vacuum emulsifying tank vacuum homogeneous, the material liquid is fully homogenized refined into the liquid molecules, products delicate, emulsification thoroughly.Using 316L stainless steel, fully meet the health needs of production. Widely used in food, dairy, beverage, pharmaceutical, fine chemical and biological technology

• MOQ 1 Set(s)

Under-Cap Filling Machine It sets vacuum sucking, filling and sealing. It is a kind of dedicated equipment which requires that products must be sealed immediately after filling from (non-core valve) covers in a vacuum state. It can be used for filling the refrigerant (F12, F22, 134a) and air conditioning lubricants.

• MOQ 1 Set(s)

CJ-Y2 paste filling sealing machine The integrated equipment suitable for all kinds of paste, the viscosity of the fluid and other materials easily and accurately into the hose, and complete the tube heating, sealing and batch number, production date. The contact part of 316L stainless steel manufacturing, clean, sanitary, meet the requirements of GMP .Applied to medicine, food, cosmetics, daily chemical products industries such as plastic pipe, aluminum-plastic composite tube filling sealing. Customized products（定制） Filling speed灌装速度：0-25 pcs/min 20-60 pcs/min Filling volume ( optional)灌装范围：5ml-250ml（可调） Filling accuracy灌装精度：≤±1% The diameter of the hose软管直径：Φ10-Φ50mm The length of hose( maximum length )软管长度：210mm （最大长度）

• MOQ 1 Set(s)
• produce various aerosol productssaving time and effort

CJXH-800 semi-automatic aerosol filling machine Product Description: (1)Double heads machine can complete gas blowing and sealing in one working table, it satisfies customers' special needs for only gas blowing, no liquid filling. The machine is safe and reliable, maintained conveniently.It has small-occupied area and simple operation, belongs to economical aerosol production equipment. (2)Three heads machine can complete liquid filling, gas blowing and sealing in one working table.Only one worker can complete the entire process for normal aerosol production in turns. (3)Production line is transformed by the original semi-automatic aerosol filling machine after improvement, optimization, integration.Filling machine, sealing machine and gas blowing machine are controlled separately. (4)Above three classes are applied to filling most mediums, it can produce various aerosol products.With the original technical design, it is easy to operate saving time and effort; Its filling end is controlled separately, no discharging without filling;It is sealing with high quality for adopting oriented-sealing; The way of the oriented inflation in the charging end is accurate and efficient with minimal gas consumption. The type is widely used in production of experimental family and laboratory equipment including food, medicine, sanitation, cars, environmental protection, fire and cosmetic products and so on about aerosol products. Technical parameters: Filling volume(ml): 20-750ml（specification can be made by request）; Filling accuracy: ≤±1% Gas volume(ml): 20-450ml Gas accuracy: ≤±1% Sealing accuracy: ≤±1% Working Pressure: 0.65-1.0MPa Available valve: 1”(25.4mm) Production capacity: Double heads: 50-100 cans/hour Three heads: 100-200 cans /hour Production line: 200-400cans/hour Maximum air consumption: 0.8(m3/min) Applicable aerosol can diameter: 35-65 (mm) Applicable aerosol can height: 80-350(mm)

• MOQ 1 Set(s)

CJXH-2800 fully automatic aerosol filling machine Product Description: (2)The CJXH-2800 of normal configurations consist of fully automatic filling machine, fully automatic sealing-blowing machine, conveyor belt.It can continuously complete feeding, blowing, and evacuation, sealing and filling automatically. Its filling end is controlled separately, no discharging without filling;It is sealing with high quality for adopting oriented-sealing; The way of the oriented inflation in the charging end is accurate and efficient with minimal gas consumption. The machine is safe and reliable, maintained conveniently.It has small-occupied area and simple operation, Only one worker can complete the entire process for normal aerosol production in turns. (3)The CJXH-2800 of advanced configurations consist of Automatic valve machine, automatic weighing machine, automatic detection system and inkjet machine.This machine is in advanced level of the same industry at present. It have been exported to Europe, America, Africa, southeast Asia. Technical parameters: Filling volume(ml): 50-750ml（specification can be made by request）; Filling accuracy: ≤±1% Gas volume(ml): 50-750ml Gas accuracy: ≤±1% Sealing accuracy: ≤±1% Working Pressure: 0.65-1.0MPa Available valve: 1”(25.4mm) Production capacity: 2400-3600cans/hour Maximum air consumption: 1(m3/min) Applicable aerosol can diameter: 35-65 (mm) Applicable aerosol can height: 80-350(mm)

1, We provide professional training of washing powder production technology, and the professional formula of producing washing powder, detergent and shampoo.We provide the legal formality of foundeding washing powder factory. Well-known technology brand. 2:Our machine has been packed by our engineers before the delivery .and the machine has also the debugged , you needn’t to install .