Xinxiang Doing Renewable Energy Equipment Co.,Ltd.

zhengzhou, Henan, China

• MOQ 1 Set(s)
• Brand NameDOING
• operating pressurenormal
• delivery time20 days
• mode of coolingwater cooling
• structural formhorizontal rotation
• oil yield4.5ton
• lifespan8-10years
• material of reactorQ245R
• kind of transmissioninternal gear drive
• size of Reactor(D*L)2600*6600
• noise dB(A)less than 85
• raw materialtyre/plastic
• total power22KW
• thickness of reactor16mm
• Availability35ton
• 24-hour capacity0.4turn/minute
• rotate speed of Reactor0.4turn/minute

• MOQ 1 Set(s)
• size of Reactor(D*L)2600*6600
• Brand NameDOING
• 24-hour capacity10ton
• total cooling area74sqm
• kind of transmissioninternal gear drive
• total power22KW
• raw materialtyre/plastic
• lifespan8-10years
• thickness of reactor16mm
• Availability35ton
• operating pressurenormal

• MOQ 1 Set(s)
• thickness of reactor16mm
• working formintermittent operation
• structural formhorizontal rotation
• rotate speed of Reactor0.4turn/minute
• size of Reactor(D*L)2600*6600
• total cooling area74sqm
• delivery time20 days
• total power22KW
• operating pressurenormal
• oil yield4.5ton
• Availability35ton
• rawtyre/plastic
• lifespan8-10years
• 24-hour capacity10ton
• material of reactorQ245R
• noise dB(A)less than 85
• mode of coolingwater cooling
• kind of transmissioninternal gear drive

We are offering waste tyre pyrolysis machine turn waste to oil machine. how to operate this machine? 1) feed the raw material into furnace automatically or manually, then seal the feed inlet system 2) heat the reactor by burning the fuel material(coal, or wood, or natural gas , oil ) in the combustion system the reactor will slowly become heat , when the temperature reach around 250 degree celsius, the oil gas will be formed 3) after processed by our technology, the oil gas will go to cooling system for cold liquid oil the gas which can not become liquid under normal pressure , will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy 4)after finished oil produce , the temperature of reactor will be down, while, carbon black can be discharged automatically 5) when the temperature fall down to 100 degree celsius, worker could opened the door of reactor to discharge of steel wire 6) then can start to another batch working advantages of waste tyre and plastic recycling machine 1. High oil output rate 45%--55%. 2. Rapid condensers and large cooling area89 square meters, assure u get much more and higher quality oil. 3. Double dust removing device, more environmental protection. 4. Double tail gas recovery, saving energy. 5. Q245r boiler steel plate, high temperature resistance, thickness reaches 14mm--18mm, guarantee 6--8 years service lives. 6. Auto feeder and carbon black elevator, high automation, saving time and labors. technical detail this is a batch process system. the waste tyres are fed into the reactor vessel and heated under controlled conditions of temperature and pressure. the process will bring about molecular restructuring of the rubber under the pyrolysis process as the result; furnace oil in gaseous form is produced along with other gases. these vaporized gases are passed through heat exchanges, where in the furnace oil is condensed into liquid form. during the process, carbon black and steel are also generated. the heat exchanger uses coolant water, as a condensing medium and this water is re-circulated through process. after-sales service installation and training: we will send one technicians for each set of machine to your company within 10 days when the machine arrives to your factory. The technicians will be charge of guiding your installation, testing the machine and training your workers. The installation period shall be 30 days. You shall pay salary for the technician with 50usd per day and also the round-trip ticket and accommodation. as we all know, this is a special field, high profit and high risk. So, when you choose a supplier, security will be the most important thing.except security, technology, quality and oil refining experience are also very important. Since this is a new field, so, no exact rules. In this way, experiences and technology will be the key point. As for the quality, it should be worth of your cost.

• MOQ 1 Set(s)
• mode of coolingwater cooling
• kind of transmissioninternal gear drive
• 24-hour capacity10ton
• lifespan8-10years
• delivery time20 days
• oil yield4.5ton

We are offering waste tyre recycling machine. how to operate this machine? 1) feed the raw material into furnace automatically or manually, then seal the feed inlet system 2) heat the reactor by burning the fuel material(coal, or wood, or natural gas , oil ) in the combustion system the reactor will slowly become heat , when the temperature reach around 250 degree celsius, the oil gas will be formed 3) after processed by our technology, the oil gas will go to cooling system for cold liquid oil the gas which can not become liquid under normal pressure , will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy 4)after finished oil produce , the temperature of reactor will be down, while, carbon black can be discharged automatically 5) when the temperature fall down to 100 degree celsius, worker could opened the door of reactor to discharge of steel wire 6) then can start to another batch working advantages of waste tyre and plastic recycling machine 1. High oil output rate 45%--55%. 2. Rapid condensers and large cooling area89 square meters, assure u get much more and higher quality oil. 3. Double dust removing device, more environmental protection. 4. Double tail gas recovery, saving energy. 5. Q245r boiler steel plate, high temperature resistance, thickness reaches 14mm--18mm, guarantee 6--8 years service lives. 6. Auto feeder and carbon black elevator, high automation, saving time and labors. technical detail this is a batch process system. the waste tyres are fed into the reactor vessel and heated under controlled conditions of temperature and pressure. the process will bring about molecular restructuring of the rubber under the pyrolysis process as the result; furnace oil in gaseous form is produced along with other gases. these vaporized gases are passed through heat exchanges, where in the furnace oil is condensed into liquid form. during the process, carbon black and steel are also generated. the heat exchanger uses coolant water, as a condensing medium and this water is re-circulated through process. after-sales service installation and training: we will send one technicians for each set of machine to your company within 10 days when the machine arrives to your factory. The technicians will be charge of guiding your installation, testing the machine and training your workers. The installation period shall be 30 days. You shall pay salary for the technician with 50usd per day and also the round-trip ticket and accommodation. as we all know, this is a special field, high profit and high risk. So, when you choose a supplier, security will be the most important thing.except security, technology, quality and oil refining experience are also very important. Since this is a new field, so, no exact rules. In this way, experiences and technology will be the key point. As for the quality, it should be worth of your cost.

• MOQ 1 Set(s)
• operating pressurenormal
• 24-hour capacity10ton
• mode of coolingwater cooling
• oil yield4.5ton
• raw materialtyre/plastic
• rotate speed of Reactor0.4turn/minute
• material of reactorQ245R
• structural formhorizontal rotation
• thickness of reactor16mm
• lifespan8-10years

We are offering used oil refinery machine. How to operate this machine? 1) feed the raw material into furnace automatically or manually, then seal the feed inlet system 2) heat the reactor by burning the fuel material(coal, or wood, or natural gas , oil ) in the combustion system the reactor will slowly become heat , when the temperature reach around 250 degree celsius, the oil gas will be formed 3) after processed by our technology, the oil gas will go to cooling system for cold liquid oil the gas which can not become liquid under normal pressure , will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy 4)after finished oil produce , the temperature of reactor will be down, while, carbon black can be discharged automatically 5) when the temperature fall down to 100 degree celsius, worker could opened the door of reactor to discharge of steel wire 6) then can start to another batch working advantages of waste tyre and plastic recycling machine 1. High oil output rate 45%--55%. 2. Rapid condensers and large cooling area89 square meters, assure u get much more and higher quality oil. 3. Double dust removing device, more environmental protection. 4. Double tail gas recovery, saving energy. 5. Q245r boiler steel plate, high temperature resistance, thickness reaches 14mm--18mm, guarantee 6--8 years service lives. 6. Auto feeder and carbon black elevator, high automation, saving time and labors. technical detail this is a batch process system. The waste tyres are fed into the reactor vessel and heated under controlled conditions of temperature and pressure. The process will bring about molecular restructuring of the rubber under the pyrolysis process as the result; furnace oil in gaseous form is produced along with other gases. These vaporized gases are passed through heat exchanges, where in the furnace oil is condensed into liquid form. During the process, carbon black and steel are also generated. The heat exchanger uses coolant water, as a condensing medium and this water is re-circulated through process. after-sales service installation and training: we will send one technicians for each set of machine to your company within 10 days when the machine arrives to your factory. The technicians will be charge of guiding your installation, testing the machine and training your workers. The installation period shall be 30 days. You shall pay salary for the technician with 50usd per day and also the round-trip ticket and accommodation. as we all know, this is a special field, high profit and high risk. So, when you choose a supplier, security will be the most important thing.except security, technology, quality and oil refining experience are also very important. Since this is a new field, so, no exact rules. In this way, experiences and technology will be the key point. As for the quality, it should be worth of your cost.

• MOQ 1 Set(s)
• mode of coolingwater cooling
• delivery time20 days
• kind of transmissioninternal gear drive
• lifespan8-10years
• 24-hour capacity10ton

We are offering waste plastic recycling machine. how to operate this machine? 1) feed the raw material into furnace automatically or manually, then seal the feed inlet system 2) heat the reactor by burning the fuel material(coal, or wood, or natural gas , oil ) in the combustion system the reactor will slowly become heat , when the temperature reach around 250 degree celsius, the oil gas will be formed 3) after processed by our technology, the oil gas will go to cooling system for cold liquid oil the gas which can not become liquid under normal pressure , will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy 4)after finished oil produce , the temperature of reactor will be down, while, carbon black can be discharged automatically 5) when the temperature fall down to 100 degree celsius, worker could opened the door of reactor to discharge of steel wire 6) then can start to another batch working advantages of waste tyre and plastic recycling machine 1. High oil output rate 45%--55%. 2. Rapid condensers and large cooling area89 square meters, assure u get much more and higher quality oil. 3. Double dust removing device, more environmental protection. 4. Double tail gas recovery, saving energy. 5. Q245r boiler steel plate, high temperature resistance, thickness reaches 14mm--18mm, guarantee 6--8 years service lives. 6. Auto feeder and carbon black elevator, high automation, saving time and labors. technical detail this is a batch process system. the waste tyres are fed into the reactor vessel and heated under controlled conditions of temperature and pressure. the process will bring about molecular restructuring of the rubber under the pyrolysis process as the result; furnace oil in gaseous form is produced along with other gases. these vaporized gases are passed through heat exchanges, where in the furnace oil is condensed into liquid form. during the process, carbon black and steel are also generated. the heat exchanger uses coolant water, as a condensing medium and this water is re-circulated through process. after-sales service installation and training: we will send one technicians for each set of machine to your company within 10 days when the machine arrives to your factory. The technicians will be charge of guiding your installation, testing the machine and training your workers. The installation period shall be 30 days. You shall pay salary for the technician with 50usd per day and also the round-trip ticket and accommodation. as we all know, this is a special field, high profit and high risk. So, when you choose a supplier, security will be the most important thing.except security, technology, quality and oil refining experience are also very important. Since this is a new field, so, no exact rules. In this way, experiences and technology will be the key point. As for the quality, it should be worth of your cost.

• MOQ 1 Set(s)
• lifespan8-10years
• mode of coolingwater cooling
• total power22KW
• delivery time20 days
• 24-hour capacity10ton
• working formhorizontal rotation
• size of Reactor(D*L)2600*6600
• kind of transmissioninternal gear drive

We are offering garbage incinerator machine. How to operate this machine? 1) feed the raw material into furnace automatically or manually, then seal the feed inlet system 2) heat the reactor by burning the fuel material(coal, or wood, or natural gas , oil ) in the combustion system the reactor will slowly become heat , when the temperature reach around 250 degree celsius, the oil gas will be formed 3) after processed by our technology, the oil gas will go to cooling system for cold liquid oil the gas which can not become liquid under normal pressure , will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy 4)after finished oil produce , the temperature of reactor will be down, while, carbon black can be discharged automatically 5) when the temperature fall down to 100 degree celsius, worker could opened the door of reactor to discharge of steel wire 6) then can start to another batch working advantages of waste tyre and plastic recycling machine 1. High oil output rate 45%--55%. 2. Rapid condensers and large cooling area89 square meters, assure u get much more and higher quality oil. 3. Double dust removing device, more environmental protection. 4. Double tail gas recovery, saving energy. 5. Q245r boiler steel plate, high temperature resistance, thickness reaches 14mm--18mm, guarantee 6--8 years service lives. 6. Auto feeder and carbon black elevator, high automation, saving time and labors. technical detail this is a batch process system. The waste tyres are fed into the reactor vessel and heated under controlled conditions of temperature and pressure. The process will bring about molecular restructuring of the rubber under the pyrolysis process as the result; furnace oil in gaseous form is produced along with other gases. These vaporized gases are passed through heat exchanges, where in the furnace oil is condensed into liquid form. During the process, carbon black and steel are also generated. The heat exchanger uses coolant water, as a condensing medium and this water is re-circulated through process. after-sales service installation and training: we will send one technicians for each set of machine to your company within 10 days when the machine arrives to your factory. The technicians will be charge of guiding your installation, testing the machine and training your workers. The installation period shall be 30 days. You shall pay salary for the technician with 50usd per day and also the round-trip ticket and accommodation. as we all know, this is a special field, high profit and high risk. So, when you choose a supplier, security will be the most important thing.except security, technology, quality and oil refining experience are also very important. Since this is a new field, so, no exact rules. In this way, experiences and technology will be the key point. As for the quality, it should be worth of your cost.

• MOQ 1 Set(s)
• rotate speed of Reactor0.4turn/minute
• noise dB(A)less than 85
• operating pressurenormal
• thickness of reactor16mm
• Availability35ton
• size of Reactor(D*L)2600*6600
• kind of transmissioninternal gear drive
• mode of coolingwater cooling
• working formintermittent operation
• structural formhorizontal rotation
• total power22KW
• 24-hour capacity10ton
• raw materialtyre/plastic
• oil yield4.5ton
• material of reactorQ245R
• cooing area of condeser74sqm

We are offering tyre oil distillation machine. how to operate this machine? 1) feed the raw material into furnace automatically or manually, then seal the feed inlet system 2) heat the reactor by burning the fuel material(coal, or wood, or natural gas , oil ) in the combustion system the reactor will slowly become heat , when the temperature reach around 250 degree celsius, the oil gas will be formed 3) after processed by our technology, the oil gas will go to cooling system for cold liquid oil the gas which can not become liquid under normal pressure , will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy 4)after finished oil produce , the temperature of reactor will be down, while, carbon black can be discharged automatically 5) when the temperature fall down to 100 degree celsius, worker could opened the door of reactor to discharge of steel wire 6) then can start to another batch working advantages of waste tyre and plastic recycling machine 1. High oil output rate 45%--55%. 2. Rapid condensers and large cooling area89 square meters, assure u get much more and higher quality oil. 3. Double dust removing device, more environmental protection. 4. Double tail gas recovery, saving energy. 5. Q245r boiler steel plate, high temperature resistance, thickness reaches 14mm--18mm, guarantee 6--8 years service lives. 6. Auto feeder and carbon black elevator, high automation, saving time and labors. technical detail this is a batch process system. the waste tyres are fed into the reactor vessel and heated under controlled conditions of temperature and pressure. the process will bring about molecular restructuring of the rubber under the pyrolysis process as the result; furnace oil in gaseous form is produced along with other gases. these vaporized gases are passed through heat exchanges, where in the furnace oil is condensed into liquid form. during the process, carbon black and steel are also generated. the heat exchanger uses coolant water, as a condensing medium and this water is re-circulated through process. after-sales service installation and training: we will send one technicians for each set of machine to your company within 10 days when the machine arrives to your factory. The technicians will be charge of guiding your installation, testing the machine and training your workers. The installation period shall be 30 days. You shall pay salary for the technician with 50usd per day and also the round-trip ticket and accommodation. as we all know, this is a special field, high profit and high risk. So, when you choose a supplier, security will be the most important thing.except security, technology, quality and oil refining experience are also very important. Since this is a new field, so, no exact rules. In this way, experiences and technology will be the key point. As for the quality, it should be worth of your cost.

• MOQ 1 Set(s)
• operating pressurenormal
• mode of coolingwater cooling
• oil yield4.5ton
• 24-hour capacity10ton
• kind of transmissioninternal gear drive
• delivery time20 days
• lifespan8-10years

We are offering waste to oil machine. how to operate this machine? 1) feed the raw material into furnace automatically or manually, then seal the feed inlet system 2) heat the reactor by burning the fuel material(coal, or wood, or natural gas , oil ) in the combustion system the reactor will slowly become heat , when the temperature reach around 250 degree celsius, the oil gas will be formed 3) after processed by our technology, the oil gas will go to cooling system for cold liquid oil the gas which can not become liquid under normal pressure , will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy 4)after finished oil produce , the temperature of reactor will be down, while, carbon black can be discharged automatically 5) when the temperature fall down to 100 degree celsius, worker could opened the door of reactor to discharge of steel wire 6) then can start to another batch working advantages of waste tyre and plastic recycling machine 1. High oil output rate 45%--55%. 2. Rapid condensers and large cooling area89 square meters, assure u get much more and higher quality oil. 3. Double dust removing device, more environmental protection. 4. Double tail gas recovery, saving energy. 5. Q245r boiler steel plate, high temperature resistance, thickness reaches 14mm--18mm, guarantee 6--8 years service lives. 6. Auto feeder and carbon black elevator, high automation, saving time and labors. technical detail this is a batch process system. the waste tyres are fed into the reactor vessel and heated under controlled conditions of temperature and pressure. the process will bring about molecular restructuring of the rubber under the pyrolysis process as the result; furnace oil in gaseous form is produced along with other gases. these vaporized gases are passed through heat exchanges, where in the furnace oil is condensed into liquid form. during the process, carbon black and steel are also generated. the heat exchanger uses coolant water, as a condensing medium and this water is re-circulated through process. after-sales service installation and training: we will send one technicians for each set of machine to your company within 10 days when the machine arrives to your factory. The technicians will be charge of guiding your installation, testing the machine and training your workers. The installation period shall be 30 days. You shall pay salary for the technician with 50usd per day and also the round-trip ticket and accommodation. as we all know, this is a special field, high profit and high risk. So, when you choose a supplier, security will be the most important thing.except security, technology, quality and oil refining experience are also very important. Since this is a new field, so, no exact rules. In this way, experiences and technology will be the key point. As for the quality, it should be worth of your cost.

• MOQ 1 Set(s)
• operating pressurenormal
• size of Reactor(D*L)2600*6600
• lifespan8-10years
• thickness of reactor16mm
• oil yield4.5ton
• structural formhorizontal rotation
• total cooling area74sqm
• mode of coolingwater cooling
• noise dB(A)less than 85
• raw materialtyre/plastic
• material of reactorQ245R
• total power22KW
• rotate speed of Reactor0.4turn/minute
• 24-hour capacity10ton

We are offering used oil distillation machine. how to operate this machine? 1) feed the raw material into furnace automatically or manually, then seal the feed inlet system 2) heat the reactor by burning the fuel material(coal, or wood, or natural gas , oil ) in the combustion system the reactor will slowly become heat , when the temperature reach around 250 degree celsius, the oil gas will be formed 3) after processed by our technology, the oil gas will go to cooling system for cold liquid oil the gas which can not become liquid under normal pressure , will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy 4)after finished oil produce , the temperature of reactor will be down, while, carbon black can be discharged automatically 5) when the temperature fall down to 100 degree celsius, worker could opened the door of reactor to discharge of steel wire 6) then can start to another batch working advantages of waste tyre and plastic recycling machine 1. High oil output rate 45%--55%. 2. Rapid condensers and large cooling area89 square meters, assure u get much more and higher quality oil. 3. Double dust removing device, more environmental protection. 4. Double tail gas recovery, saving energy. 5. Q245r boiler steel plate, high temperature resistance, thickness reaches 14mm--18mm, guarantee 6--8 years service lives. 6. Auto feeder and carbon black elevator, high automation, saving time and labors. technical detail this is a batch process system. the waste tyres are fed into the reactor vessel and heated under controlled conditions of temperature and pressure. the process will bring about molecular restructuring of the rubber under the pyrolysis process as the result; furnace oil in gaseous form is produced along with other gases. these vaporized gases are passed through heat exchanges, where in the furnace oil is condensed into liquid form. during the process, carbon black and steel are also generated. the heat exchanger uses coolant water, as a condensing medium and this water is re-circulated through process. after-sales service installation and training: we will send one technicians for each set of machine to your company within 10 days when the machine arrives to your factory. The technicians will be charge of guiding your installation, testing the machine and training your workers. The installation period shall be 30 days. You shall pay salary for the technician with 50usd per day and also the round-trip ticket and accommodation. as we all know, this is a special field, high profit and high risk. So, when you choose a supplier, security will be the most important thing.except security, technology, quality and oil refining experience are also very important. Since this is a new field, so, no exact rules. In this way, experiences and technology will be the key point. As for the quality, it should be worth of your cost.