Yantai Sanmon Machinery Equipments Co Ltd.

Yantai, Shandong, China

• MOQ 01 Piece(s)
• Brand NameSANMON
• USAGEJoining sucker rod for oil pumping
• SIZE5/8, 3/4, 7/8, 1, 1-1/8
• THREADPIN-PIN, BOX-BOX, PIN-BOX,
• STADARDAPI Spec 11B
• CLASST, SM, UHS
• WALL THICK FULL SIZE, SLIM HOLE

• MOQ 100 Piece(s)
• MaterialNylon, Rubber, and Carbon steel for guide body
• Brand NameSANMON
• ApplicationCentralize the sucker rod and anti-cossion
• SIZESAME AS SUCKER ROD AND TUBING USED FOR

Wer are offering sucker rod guide. function: sucker rod centralizer used in pumping well, it�s a tool which can set upright the sucker rod, and protect the sucker rod wiping with tubing pipe�we can product wheel centralizer, rod shaped centralizer, twist centralizer.operational principle:wheel centralizer: when the sucker rod works the wheel rolls on tubing inside. It can avoid the sucker rod to rub with the tubing pipe.rod shaped centralizer: when the sucker rods work, nylon block touches the tubing inside, it can avoid the sucker rod to rub with the tubing pipe. The nylon block can rotate, and then the rub is even wear. The user only change the nylon block replace rod body, can save fabrication-cost.twist centralizer: it�s cheap, operate easily.

• MOQ 10 Piece(s)
• Brand NameSANMON
• ApplicationCLAMP THE POLISHED ROD FOR HOLD IN SUCKER ROD PUMP
• SIZE1-1/4", 1-1/2", 1-5/8", 1-3/4"
• STEELFORGED STEEL, SHAPED BY MODE AND THEN MACHINED TO PRODUCT

We are offering polished rod clamps. The polished rod clamp is of hinge-jointed butterfly structure, it is fixed on the polished rod as retaining device for the rope hanger. It makes the pumping unit horsehead connected with polished rod through rope hanging device, and then the polished rod append and supprt the load of sucker rod string. The polished rod clamp is an important part connecting oil pump and sucker rod, it is required not only reliable, have a certain capacity, but also can not cause damage for sucker rod. We can supply full line of polished rod clamps and other casting parts according to customers' requirements as a professional supplier. All of its technical specifications meet the oil and gas industry standard sy/t5029-2003 and the american petroleum institution api spec 1b standard. It adopts precision casting, normalized thermal treatment and fine process in production, and fully tested after finished production to make it function well in use. material of clamps: 45#(aisi 1045), 35mn2a(aisi1536m), 25mnva(aisi 1526/1526m) mechanical properties： hardness scale：190hb-300hb rated workload： each polished rod clamp design shall have a stated maximum load rating. The maximum rated load shall be no more than 75 % of the minimum load to initial slippage when a new polished rod clamp which has successfully completed validation testing per f.3 in accordance with api spec11b(27th). Type: as per stated workload: type wl12000, type wl 16000，type wl18100 as per structures: single bolt (one layer), two bolts (two layers), three bolts (three layers). Sizes: φ25（1") , φ28(1-1/8"), φ32(1-1/4"), φ35(1-3/8"), φ38(1-1/2"), φ41(1-5/8") suitable for polished rod size:19mm, 22mm, 25mm, 28mm, 32mm, 38mm, 45mm, 50mm polished rod work load: 160kn --800kn structure composites: fasting bolt, fasting nut, clamp body, hinge, and fixed washer set.

• MOQ 100 Piece(s)
• Brand NameSANMON
• MATERIALAISI 4140， AISI4135， AISI4330
• STANDARDAPI Spec 11B
• THREAD TREATMENTPHOSPHATING
• SIZE5/8, 3/4
• SURFACESPRAYMETAL
• THREAD8RD/IN, API STANDARD
• LENGTH4

We are offering Sucker Rod Coupling, Coupling, Sm Coupling. Sanmon always promote cost-effective products with punctual delivery and attentive service, such as api spec 11b standard sucker rod couplings. With years' experience on oilfield equipments, we offer a complete range of api sucker rod and couplings. There are over 20 production lines in our factory especially for sucker rod and couplings, and we can offer 45, 000 pieces of couplings each month. Sanmon has set an top standard over industry with the design of the premier performance sucker rod couplings including api class t (through hard), api class sm (spray metal), sub sucker rod coupling and polished rod connection designs, combines top quality steel with a cold rolled thread that increase fatigue resistance. They are available of full size and slim hole for all size 5/8", 3/4", 7/8", 1" and 1-1/8", manufactured with high quality carbon steel aisi 5i40 /4135/4142. over years' hard work, we have own a good many of friends have fixed business with us and our products have been satisfying customers home and overseas. If you have any interests on our sucker rod coupling, please feel free to contact us for further information! we're the special supplier, and the cost is much lower than some inter-trade enterprises, also we can supply more excellent quality, to build a long-term business relationship with you.

• MOQ 100 Piece(s)
• MaterialAISI 5140, AISI 4135, AISI 4140， AISI4135， AISI4330
• GradeAPI Spec 11B
• Brand NameSANMON
• Length4"
• THREAD TREATMENTPHOSPHATING
• Size5/8, 3/4", 7/8", 1", 1-1/8"
• SURFACENICKEL-BASE ALLOY SPRAY METAL
• THREAD8RD/IN, API STANDARD

We are offering Sucker Rod Coupling and Spray Metal Couplings for Pump Rod. sanmon always promote cost-effective products with punctual delivery and attentive service, such as api spec 11b standard sucker rod couplings. with years' experience on oilfield equipments, we offer a complete range of api sucker rod and couplings. there are over 20 production lines in our factory especially for sucker rod and couplings, and we can offer 45, 000 pieces of couplings each month. sanmon has set an top standard over industry with the design of the premier performance sucker rod couplings including api class t (through hard), api class sm (spray metal), sub sucker rod coupling and polished rod connection designs, combines top quality steel with a cold rolled thread that increase fatigue resistance. they are available of full size and slim hole for all size 5/8", 3/4", 7/8", 1" and 1-1/8", manufactured with high quality carbon steel aisi 5i40 /4135/4142. over years' hard work, we have own a good many of friends have fixed business with us and our products have been satisfying customers home and overseas. if you have any interests on our sucker rod coupling, please feel free to contact us for further information! we're the special supplier, and the cost is much lower than some inter-trade enterprises, also we can supply more excellent quality, to build a long-term business relationship with you.

• MOQ 100 Piece(s)
• MaterialAISI 5140, AISI 4135, AISI 4140， AISI4135， AISI4330
• GradeAPI Spec 11B
• Brand NameSANMON
• SURFACESPRAYMETAL
• Size5/8, 3/4", 7/8", 1", 1-1/8"
• THREAD8RD/IN, API STANDARD
• THREAD TREATMENTNICKEL-BASE ALLOY SPRAY METAL
• Length4"

We offer class t sucker rod coupling, pump rod coupling, rod connection. Sanmon always promote cost-effective products with punctual delivery and attentive service, such as api spec 11b standard sucker rod couplings. With years' experience on oilfield equipments, we offer a complete range of api sucker rod and couplings. There are over 20 production lines in our factory especially for sucker rod and couplings, and we can offer 45, 000 pieces of couplings each month. Sanmon has set an top standard over industry with the design of the premier performance sucker rod couplings including api class t (through hard), api class sm (spray metal), sub sucker rod coupling and polished rod connection designs, combines top quality steel with a cold rolled thread that increase fatigue resistance. They are available of full size and slim hole for all size 5/8", 3/4", 7/8", 1" and 1-1/8", manufactured with high quality carbon steel aisi 5i40 /4135/4142. over years' hard work, we have own a good many of friends have fixed business with us and our products have been satisfying customers home and overseas. If you have any interests on our sucker rod coupling, please feel free to contact us for further information! we're the special supplier, and the cost is much lower than some inter-trade enterprises, also we can supply more excellent quality, to build a long-term business relationship with you.

• MOQ 100 Piece(s)
• MaterialAISI 5140, AISI 4135, AISI 4140， AISI4135， AISI4330
• Brand NameSANMON
• GradeAPI Spec 11B
• Size5/8, 3/4", 7/8", 1", 1-1/8"
• THREAD TREATMENTPHOSPHATING
• THREAD8RD/IN, API STANDARD
• SURFACENICKEL-BASE ALLOY SPRAY METAL
• Length4"

We offer sucker rod coupling with big chamfer. Sanmon always promote cost-effective products with punctual delivery and attentive service, such as api spec 11b standard sucker rod couplings. With years' experience on oilfield equipments, we offer a complete range of api sucker rod and couplings. There are over 20 production lines in our factory especially for sucker rod and couplings, and we can offer 45, 000 pieces of couplings each month. Sanmon has set an top standard over industry with the design of the premier performance sucker rod couplings including api class t (through hard), api class sm (spray metal), sub sucker rod coupling and polished rod connection designs, combines top quality steel with a cold rolled thread that increase fatigue resistance. They are available of full size and slim hole for all size 5/8", 3/4", 7/8", 1" and 1-1/8", manufactured with high quality carbon steel aisi 5i40 /4135/4142. over years' hard work, we have own a good many of friends have fixed business with us and our products have been satisfying customers home and overseas. If you have any interests on our sucker rod coupling, please feel free to contact us for further information! we're the special supplier, and the cost is much lower than some inter-trade enterprises, also we can supply more excellent quality, to build a long-term business relationship with you.

• MOQ 100 Piece(s)
• MaterialAISI 5140, AISI 4135, AISI 4140， AISI4135， AISI4330
• GradeAPI Spec 11B
• Brand NameSANMON
• LENGTH4"
• THREAD TREATMENTPHOSPHATING
• SURFACENICKEL-BASE ALLOY SPRAY METAL
• Size5/8, 3/4", 7/8", 1", 1-1/8"
• THREAD8RD/IN, API STANDARD

We are offering Sub Coupling, Sub Od Sucker Rod Coupling and Change Over Couplings. sanmon always promote cost-effective products with punctual delivery and attentive service, such as api spec 11b standard sucker rod couplings. with years' experience on oilfield equipments, we offer a complete range of api sucker rod and couplings. there are over 20 production lines in our factory especially for sucker rod and couplings, and we can offer 45, 000 pieces of couplings each month. sanmon has set an top standard over industry with the design of the premier performance sucker rod couplings including api class t (through hard), api class sm (spray metal), sub sucker rod coupling and polished rod connection designs, combines top quality steel with a cold rolled thread that increase fatigue resistance. they are available of full size and slim hole for all size 5/8", 3/4", 7/8", 1" and 1-1/8", manufactured with high quality carbon steel aisi 5i40 /4135/4142. over years' hard work, we have own a good many of friends have fixed business with us and our products have been satisfying customers home and overseas. if you have any interests on our sucker rod coupling, please feel free to contact us for further information! we're the special supplier, and the cost is much lower than some inter-trade enterprises, also we can supply more excellent quality, to build a long-term business relationship with you.

• Brand Namesanmon

We are offering sucker rod centralizer. Sucker rod guide, or sucker rod centralizer, used in pumping well, is a tool which can set upright the sucker rod, and protect the sucker rod from wiping with tubing pipe. Sanmon supply many types of sucker rod guide including coupling centralizer, rod-shaped centralizer, wheels centralizer, snap-on centralizer, and special centralizers for eccentric wear prevention, for tubing and for pc pumps, using good alloy steel for shoat hole and nylon66, or nylon1010 for centralizing element in production to guarantee excellent quality, or as per your special demand. yantai sanmon machinery equipments co, ltd no.40, qingnian road, zhifu district, yantai, 264000, china www cnsanmon com contact ms. Candice king mobile 0086 13406540801 candice at cnsanmon com msn sanmonmachinery at hotmail com skype sanmonmachinery

• MOQ 10 Piece(s)
• MaterialAISI 4140， AISI4135， AISI4330
• Brand NameSANMON
• ApplicationJoining Sucker Rod for Oil Pumping
• Length8ft, 11ft, 16ft, 22ft, 24ft, 26ft, 30ft, 36ft
• SIZE1", 1-1/8", 1-1/4", 1-1/2"
• GRADEC, D, K, KD, HL, HY, UHS
• STADARDAPI Spec 11B
• THREAD5/8, 3/4

We are offering polished rod, polished sucker rod, sucker rod. polished rod is designed with the same function with sucker rod but used at the top surface of oilwell, it is also called polished sucker rod, as it come accross the stuffing box to join the downside sucker rod and horse head through bridle and clamp. we can supply the folllowing kind of polished rod: normal type one end diameter enlarged polished rod high-strength, long stroke, corrosion resistant polished rod- i. Using high strength steel ii. Surface electroplating iii. Surface spray metal. all the polished rods are made of quality alloy steel and machined by advanced equipment and technology, with high strength, smooth surface and long service life. The tensile strength exceeds 1, 000 mpa (145, 000psi). polished rod details: product standard: api spec 11b latest edition for polished rod and liners polished rod nominal sizes: 1"(25.4mm), 1-1/8"(28.58mm), 1-1/4"(31.75mm), 1-1/2"(38.10mm) polished rod thread diameters: 3/4"(19.1mm), 15/16"(23.8mm), 1-3/16"(31.2mm), 1-3/8"(34.9mm) polished rod length: 8ft(2.4m), 11ft(3.3m), 16ft(4.8m), 22ft(6.7m), 24ft(7.3m), 26ft(7.9m), 30ft(9.1m), 36ft(10.9m) polished rod grade: c, d, k, kd, hl, hy, uhs steel grade of polished rod: aisi 4118(20crmoa), aisi 4135(35crmoa), aisi 4142(42crmoa) spray metal polished rod details: product standard: api spec 11b latest edition for polished rod and liners polished rod nominal sizes: 1"(25.4mm), 1-1/8"(28.58mm), 1-1/4"(31.75mm), 1-1/2"(38.10mm) polished rod length: 8ft(2.4m), 11ft(3.3m), 16ft(4.8m), 22ft(6.7m), 24ft(7.3m), 26ft(7.9m), 30ft(9.1m), 36ft(10.9m) basic steel of polished rod: aisi 4118(20crmoa), aisi 4135(35crmoa), aisi 4142(42crmoa) surface coating alloy: ni35, or ni60a tensile strength(mpa /psi): 794-965mpa (115, 000-140, 000psi) suitable media: � cl-, co2, h2s.

• MOQ 100 Piece(s)
• Brand NameSANMON
• Length25ft, 30ft, 40ft
• SIZE5/8
• MATERIALAISI 4140， AISI4135， AISI4330
• STADARDAPI Spec 11B
• GRADEC, D, K, KD, HL, HY, UHS

We are offering sucker rod. We market 3 types of api 11b sucker rods, formulated from different grades d, k, h, and all rods are made of good alloy steel or as per clients' demand. In the manufacture process, we plant the top level crafts and advanced production equipments & detecting devices. Quality is excellent and prices are reasonable. sucker rod details product standard: api spec 11b latest edition steel grade: c, d, k, kd, hl, hy, uhs aisi grade: aisi1045, aisi4118, aisi4620, aisi4142, aisi3130, aisi4330 sucker rod sizes(inch): 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4”, 1-1/2” sucker rod length(ft): 25ft, 30ft, 40ft sucker rod coupling sizes(inch): 5/8", 3/4", 7/8", 1", 1-1/8" sucker rod coupling types: t, sm, uhs (full size, slim hole, change over).

• MOQ 100 Piece(s)
• MaterialAISI 4140， AISI4135， AISI4330
• Brand NameSANMON
• Applicationfor oil pumping in downhole oil string
• Length2ft, 4ft, 6ft, 8ft, 10ft, 12ft, etc.
• STADARDAPI Spec 11B
• GRADEC, D, K, KD, HL, HY, UHS
• SIZE5/8

We are offering pony rods, sucker rod, pony sucker rod. pony rod is a short sucker rod with random length, and its steel chemical composition & machenical properties and the rod diameter, dimensions and tolerance & grade types are the same as that of sucker rods. The pony rods standard lengths: 2ft(0.61m), 4ft(1.22m), 6ft(1.83m), 8ft(2.44m), 10ft(3.05m) and 12ft(3.66m).other lengths are also available on special order. We just list some type most often used for your reference.   they are conform to api 11b standard. And the package are iron frame with black anti-corrosion coating.   we can provide small order like 20-50pcs for each type pony rods. pony rod packaging detail: square iron frame pony rod delivery detail: 30days generally , 15days for order below 30000ft place of origin: shandong china (mainland) pony rod brand name: sanmon pony rod model number:  5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2" pony rod length: 2ft(0.61m), 4ft(1.22m), 6ft(1.83m), 8ft(2.44m), 10ft(6.10m), 12ft(3.66m) pony rod usage: oil planting tool pony rod grade: c, d, k, kd, hl. Hy. Uhs pony rod condition: new rods.

We are offering stuffing box. Stuffing box to be installed at pumping well head and seal off the polished rod with cone packing and free floating lubricated upper section to assure self alignment and packing burn out, designed to seal off leakage by fluid pressure. Features working pressure: ≤1500psi bottom thread: 1.34”, 2”, 2.12”, 3”, 3.12”, 4” bottom connection: box or pin, api tubing or line pipe thread. Material: aisi10454130 casting steel or ductile iron split cone packing (rod sizes): 1”, 1.18”, 1.14”, 1.12” and 1.34” technical features: 1. Perfect deflection adjustment and anti-eccentric wear （1）self centering in axial direction （2）deflection in radical direction 2. Easily maintained and long life of gland 3. Combined gland is much more reliable 4. Built 8 packing rings in upper gland and 4 packing rings in lower 5. Auto-correction 6. Built with bop component

We are offering 1. Polished rod clamp as per stated workload: type wl12000, type wl 16000，type wl18100 as per structures: single bolt (one layer), two bolts (two layers), three bolts (three layers). 2. Polished rod clamp sizes: φ25（1") , φ28(1-18"), φ32(1-14"), φ35(1-38"), φ38(1-12"), φ41(1-58") suitable for polished rod size:19mm, 22mm, 25mm, 28mm, 32mm, 38mm, 45mm, 50mm polished rod work load: 160kn --800kn we can supply full line of polished rod clamps and other casting parts according to customers' requirements as a professional supplier. All of its technical specifications meet the oil and gas industry standard syt5029-2003 and the american petroleum institution api spec 1b standard. It adopts precision casting, normalized thermal treatment and fine process in production, and fully tested after finished production to make it function well in use.