Zhejiang Hongtao Group

• MOQ 1 Set(s)

*Running speed: 15~120 m/min *Overfeeding range: -10~+30% *Machine hand: left hand (or right hand) *Chamber working temperature: 140~220℃ *Fabric-in mode: Open-width entry，needle board or clip horizontal running *Fabric-out cooling type: Air cooling and cooling cylinder *Fabric-out mode: swing off the fabric folded or winding with large package *Main driving mode: Drove by AC Motor, speed regulation by frequency conversion *Installed power: About 160 KW (changed as per machines different configurations) *Circulating fan style: Up and down axial fan blow, speed regulation by AC frequency conversion *Over-feeding transmission: Transmitted by AC actuating motor, digital controls speed regulation or AC frequency conversion.

• MOQ 1 Set(s)

*Hot Flue Padding Machine *Building block type structure: you can assembly the production lines according to different production process. *Metric width: 1800~3600mm *Fabric guide roller diameter in common use: �150 - �200mm *Directional radiator drying, automatic pneumatic withdrawal. *Pre-heating room guide rollers are coated with Teflon, easy to clean. *Big roller, short center distance, multi-point grouped frequency conversion transmission, less crumples, suitable for high-density elastic product. *Each group of hot wind drying cabinet has 6 shifts wind adjustments, in order to control color difference effectively. *Pre-heating room heated by steam; baking machine heated by thermal oil, electricity, gas etc, temperature control automatically. *Ac frequency conversion transmission, designed speed: 10-80m/minute.

• MOQ 1 Set(s)

*Building block type structure�the inter-machines process can be organized at will according to the products and technological requirement. *Usual nominal width� Clip mercerizing machine: 1800~2400mm, Straight clip mercerizing machine: 1800~3600mm Clipless mercerizing machine: 1800~3600mm *Transmitted by AC frequency conversion *Machinery speed: 10-100m/min *Nylon boards are inlaid into clip tracks: clip chain is rolling friction, suitable for medium and high speed running. *Fabric clip chain�s center distance: 17.2, 19.5, 21.8, 24m *Number of alkali rinsing and suck: 4-rinsing&4-suck; 5-rinsing&5-suck *Availability of tension mercerizing, loose pile mercerizing, wet fabric mercerizing, PH testing and energy-saving controlling, waste-reducing and water-rinsing systems effect (optional).

• MOQ 1 Set(s)

*Building block type structure：allow to assembly the production lines according to different production process. *Nominal width: 1800~3600mm *Roller diameter in common use: φ150 - φ200mm *Way of transmission: By AC frequency conversion *Designed speed: 10~80m/min *Steamer fabric capacity: 50-90m

• MOQ 1 Set(s)

Printing Color: 4-12 Roller Width (mm): 1800-3600 Designed Speed: 10-80m/min Circumference of Rotary Screen (mm): 640, 726, 820, 914, 1018mm Drying mode: 4 air-throttles, 3-layer hot flue， Drying source: steam or thermal oil or natural gas Driving mode: 4 main unit synchronous driven by AC motor with frequency conversion

• MOQ 1 Set(s)

*Metric width: 1800~3600mm *Mechanical Speed: 15-120m/min *Technological temperature: 220℃ *Heat source: Steam heating, oil heating, natural gas heating *Over-feed range: Upper fabric-in overfeed: -50~+50% Lower fabric-in overfeed: ±10% Upper needle brush overfeed: -50~+50% Lower fabric-in overfeed: -50~+50% *Transmission method: Transmission by AC frequency conversion

• MOQ 1 Set(s)

Machine width: 1800~3600mm Processing speed: 20~80 m/min Transmitted by AC frequency conversion. Pre-shrinkage: ≤16%, shrinkage:≤1% Rubber belt: Imported from Canada, America and the best rubber belt made in China.

• MOQ 1 Set(s)

1.Machine width:1800mm, 2000mm 2.Max fabric width:1600mm, 1800mm 3. Fabric holding capacity: pre-steaming 25m;steaming 300m(max) 4.Operating rate:10-80m/min 5.Heat source: steam 6.Steam pressure:0.4Mpa;consumotion:700kg/h(max) 7.Steam max temperature:110℃ 8.Transmission mode:5-unit Ac motor conversion control synchronous speed

• MOQ 1 Set(s)

Main Technical Specidication 1.The inter-machines process can be organized at will according to the different products and technical requirements. 2.Nominal width:1800~3600MM 3.Fabric guide roller body:150-200mm 4.Steam box structure: single-layer net sheet steam box, double-layer net sheet steam box, R-BOX 5.The stainless steel net sheet structure makes the steam much easier to through over the core, which ensure the consistency of the scouring and bleaching and avoids the filling bar printing. 6.Big guide roller is applied to the pre-heating room�multi-point grouped frequency conversion transmission, less crumples, suitable for high-density elastic product. 7.Steam sealing for fabric-in; water-sealing, steam-sealing or both applicable to fabric-out. Heat preservation and energy-saving surface; shot blasting board.

• MOQ 1 Set(s)

Application metric Width: 1600-3600mm (depends On Your Order) fabric Capacity: 200m; 280m; 360m (depends On Your Order) transmitted By Ac Frequency Conversion and Plc Control heat Source：steam, Thermal Oil, Natural Gas running Speed：10-60m/min the Composing of Machine： 1. Fabric-in Frame 2. Opening Width Unit 3. Loop Ager--mainly Including Centrifugal Fan, Entry and Exit Sections of Steamer and Several Medial Segments (each Medial Segment’ Fabric Capacity is 70m with Two Circulating Fans and Two Heaters, Etc.), Steam Heating Roof, Air Outlet of Fabric-in/out, Windows with Lighting, Fabric-in Roller, Chain Guide Tracks, Fabric Hung Roller Chain, Fabric Hung Roller, Main Driving, Air Content Tester., Electrical Control Cabinet, Speed Regulator with Cluth for Fabric-out, Etc. 5. Saturated Steam Generator; 6. Fresh Air Supplying Device 7. a Set of Installation Pipe Fitting-- Mainly Including Stop Valve with Filter Screen, Reducing Valve, Steam-water Separator; 8. Fabric-out Frame; 9. Ac Electric Drive; 10. Oil Circulation Heating System --mainly Including Heater and Connect Fitting; 11. a Set of Temperature Control System.