ZhongshanALLMAYTechLightingCo.Ltd.

Zhongshan, China

Wireless Waterproof Solar Security Motion Sensor Light for Patio, Deck, Yard, Garden * Energy-Saving & Eco-friendly Solar-Powered Lights Allmay LED Solar-powered light ensure efficient lighting as photovoltaic conversion rate is up to 19%, it is designed with IP65 waterproof which can greatly protect the light from water or dust. * Intelligent Light Modes, Better fit for your Needs It applied widely for illumination in courtyward, street, garden, plaza, fence, deck, etc. Solar-charging system, light controller and human body induction control so that it would turn off automaticaly in daytime, turn on when people walk nearby or any moving objects. * Updated Illumination 35 LED Solar-powered lights provide ultra brightness, Brighter than other similar LED solar lights in the market.  PLEASE KINDLY NOTE: If the sunlight is not strong, the battery may not be fully charged, so the lighting time and brightness will compromise. Please make sure the item is put in direct sunlight all day so that it can absorb more sunlight for charging. Feature Super Bright (35 Bright LEDs) Fully weather resistant and can be mounted almost anywhere. All in one design, No wiring necessary; solar energy powered Energy-saving and High-efficiency Solar Panel Detection distance: 6-10 meters, detection range: 180 degrees Durable, Weather-resistant & heatproof plastic construction Easy installation; just mount it on the wall with the included screw. Automated switch - Auto on at night.

200W Microwave Delay Human Body Motion Sensor Switch HF Radar Detector The product is a energy-saving automatically switch for lighting, It adopts Microwave Motion Sensor Module with high-frequency electro-magnetic wave(5.8GHz), integrated circuit. It gathers automatism, convenience, safety, energy-saving. low maintenance. fast response, low heat radiation, security. No RF interference.  Delay time can be adjusted from 20s to 1 min (Preset in factory) High sensitivity, it will detect slightest movement and automatically turn light on and delay. Application: for monitoring, Alarm equipment, LED Lamps, Fluorescent lamp, Exhaust fan, etc.  Specification Lifespan: 20 000 hrs Voltage: AC 185-265V Sensor type: Microwave Detection Range: 180 Degree Detection Distance: 6-10m Rated Load: Max 200W Ambient Light:

ALLMAY Rechargeable T8 LED Emergency Tubes Switch Control ONOff  are the most efficient and convenient in the industry, thus consuming the least amount of energy in your retrofit applications. Allmay's unique technology enables the use of an emergency battery pack built into the LED bulb, this allows the tube to be powered on at 20% brightness when electricity supply is cut off. this is one of the easiest and most convenient ways to replace a fluorescent system.    Feature  Battery is built inside. Usually it is used as normal tube. When the AC power is off, the lamp can automatically identify it, and lasts lighting for 2-3 hours with the support of the battery. You can still turn it on and off by the switch on your wall. Battery can be charged automatically when the AC power is on and it has been fully protected. The high performance batteries can be repeatedly chargead and discharged 1000 times, Applications Outdoor hallway Factory Basement Parking lot Warehouse T8 4ft LED Emergency Tube Technical Specifications LED Rechargeable emergency light is for replacement of fluorescent lamp in case of emergency lighting. Model AM-8D605YJ AM-8D905YJ AM-8D1205YJ Length 60cm (2 feet) 90cm (3 feet) 120cm (4 feet) Power (Routine)     9W 14W 18W Power (Emergency)     2-4W Emergency duration 2-3 Hour Weight 320g  350g 400g Diffuser     Frost Light decay

Ultra bright E27 microwave motion lamp sensor energy saving light bulb for indoor use Allmay LED light Get high quality light with minimal power consumptionThe motion sensing light bulb is ideal for installation in various places due to it its motion detection mechanism. The LED technology ensures it doesn't produce much heat thus extended its life span, brighter light,  and longer service life.In fact, it consumes just 20% of the regular incandescent bulb and lives ten times longer. You can use it at home, office and other places. The microwave motion sensing mechanism allows it to light on and off upon detecting human movement. FEATURE The bulb is extremely affordable compared to other options The sensitivity range of this fixture is up to 12 feet It is able to sense any movement within all directions Suitable for use in a number of locations around the home or office Longer lifespan than other bulbs High quality, bright LED light Dusk to dawn detection Ability to install in any interior space with ease Feature Energy saving & High sensitivity Built-in Microwave Motion Sensor Greater than 60 watt halogen Polycarbonate for extra strength Available in BC & ES Caps 2 Years Warranty CE, ROHS Certified Stays on for 30 seconds after movement detected Technical Parameter MODEL AM-QP-07 Material    Aluminum heat sink, polycarbonate cover Sensor     Microwave Power Consumption    7W (when on) and 0.1W .

4 Foot T8 Cool White ON OFF LED Tube with Sensor Description: Excellent thermal management with heat-dissipating aluminium PCB & housing - prolong LED life span High lumen output & High color rendering index Premium Grade SMD LEDs with long-lasting lumen stability Integrated design with built-in Microwave sensor. Long life time over 35, 000 hours Sensor Tube turns on with 100% when a vehicle person passes by within 6-10 meters After Approx 30 seconds, the sensor tube resumes standby mode with 0% ( OR 30% brightness ). (factory default) Features: The ultimate in energy-efficient tube lighting Full brightness when movement detected dropping to 20% brightness in standby mode (no movement).  In-built microwave motion sensor. Much more effective than previous PIR sensors. Easy to install, Allmay LED Tube fits into your existing fluorescent T8 light fixture. Poly-carbonate and aluminium construction. Low energy alternative to a standard fluorescent batten Ultra-bright LEDS: low power consumption with enhanced life expectacy Slim design: offers a more stylish and modern solution to traditional battens Technical parameters -  Sensor Tube Light with Microwave Motion Sensor Power consumption 18w in bright mode0w in standby mode Fluorescent T8 tube equivalent 36w Input voltage     85-265VAC, 50-60Hz Power factor     0.92 Lumen output     1800lm bright mode Color temperature 

T8 LED Tube with Motion Sensor 600MM 9W Radar Sensor LED Tube is a stand along LED replacement tube with an integral Microwave Activity Sensor. simply remove the ballast and starter, it is a direct replacement for 2" T8 fluorescent lamps.  The microwave Activity Sensor is used to detect motion by sending and receiving high frequency radio waves. When a person or vehicle passes the sensor, it detects a rapid change of the signal and automatically signals the tube to turn on or increase the brightness level to 100%.  Microwaves penetrate most materials (except metal) therefore they can be used behind a plastic or glass lenses.  Our Allmay LED Smart Tube is an economical way to control your lighting energy costs. Features:  Excellent thermal management with heat-dissipating aluminium PCB & housing - prolong LED life span High lumen output & High color rendering index Universal 85~265 Volt Direct Wire operation Premium Grade SMD LEDs with long-lasting lumen stability Integrated design with built-in Microwave sensor. Long life time over 35, 000 hours Sensor Tube turns on with 100% when a vehicle person passes by within 6-10 meters After Approx 30 seconds, the sensor tube resumes standby mode with 0% ( OR 30% brightness ). (factory default) Technical parameters -  Sensor Tube Light with Microwave Motion Sensor Power consumption 9w in bright mode0w in standby mode Input voltage     85-265VAC, 50-60Hz Power factor

DC12V LED Strips Microwave Sensor Switch Automatic Detect Movement with Light Control Motion Sensor Switch DC12V Automatic ONOFF Radar Sensing Movement Switch For LED Lamps The DC12V sensor switch is the intelligent ONOFF Control for 12V24V led lighting. This ONOFF sensor control is a motion detection switch, the fixture turns on when sensor control detects motion and turns off with no motion. it has daylight sensor built-in. which will detect the ambient brightness. it only work at night.  FEATURE Smart sensors: When some one enter into the range of detection, microwave detector will light up, people leave, the lamp turn off; Can automatically identify daylight and dark night. Intelligent delay Load type: LED Strips, Incandescent light bulb, energy saving lamp, LED light source, etc. Specification 1.Model: AM-RS-05DC2.Working Voltage: 12V24V3.Microwave Frequency: 5.8GHz4.Load: 35W (Incandescent Lamp, Fluorescent Lamp)5.Standby power:

AM-RS-04 ONOFF Motion Sensor Light Control This  ONOFF sensor control is a motion detection switch, the fixture turns on when sensor control detects motion and turns off with no motion. FEATURE Smart sensors: When some one enter into the range of detection, microwave detector will light up, people leave, the lamp turn off; Can automatically identify daylight and dark night. Intelligent delay Load type: Incandescent light bulb, energy saving lamp, LED light source, etc. Specification 1.Model: AM-RS-042.Working Voltage: 185V-265V AC 50Hz3.Microwave Frequency: 5.8GHz4.Load: 35W (Incandescent Lamp, Fluorescent Lamp)5.Standby power:

LED 7W E27 Day Stairs Night Light Motion Sensor LED Bulb FEATURE Built-in Microwave Motion Sensor Auto detection for light onoff Long service life up to 50, 000 hours High sensitivity, high brightness and low consumption Designed to fit standard E27B22 fittings, easy to install. Suitable for corridor, pathway, stairs, garage, garden, yard. etc. Stays on for 30 seconds after movement detected Technical Parameter MODEL AM-QP-07 Material    Aluminum heat sink, polycarbonate cover Sensor     Microwave motion sensor Power Consumption    7w (when on) Base Screw (E27) or Bayonet cap (B22) ColourTemperature Warmwhite (2700K) BeamAngle 120° LightOutput 400lumens Dimensions 70mm * 125mm Installation     Self installation Voltage     85-265VAC Sensor Range Approx 8m Time Delay     18-25seconds after movement detected LED brand SANAN LED Lifetime 50, 000hours FAQ:  Q1. Are you a manufacturer or a trading company?     We are a manufacturer, providing OEM & ODM service. Q2. What is the delivery date for a sample?     Usually about 2-3 days for items with general requirements. Q3. Are your products conforming to our standards?

FEATURE Microwave Sensor is an active motion detector, it emits high-frequency electro-magnetic wave and receive their echo. The sensor detects the change in echo from even the slightest movement in its detection zone. A microprocessor then triggers the sensor, switch light ON. Detection is possible through doors, panes of glass or thin walls. Specification Product Name: Microwave Sensor Switch;   Item No.: AM-RS-04Y Working Voltage: 185V-265V AC 50Hz Microwave Frequency: 5.8GHz Load:35W (Incandescent Lamp, Fluorescent Lamp) Standby power:

New Universal 360 degree Microwave Motion Sensor Switch, Ceiling Mounted High Sensitive Occupancy Sensors  It can detect the slightest movement when connect to LED Lamps, Alarms, Door bell etc. With motion activated, it will turn ONOFF the lighting or make the alarms, door bell working.  Technical Specification Model: AM-RS-06 Input Voltage: 185V-265V AC 50Hz Output Voltage: 185-265V AC Sensing principle: 5.8Ghz microwave motion detector Material: Flame-retardant ABS Rated Load: 5-200W (Incandescent Lamp, Energy saving, Fluorescent Lamp) Transmission power:

Microwave Motion Sensor Automatic ONOFF Switch Light Time and Range Adjustable Description The sensor is an active motion detector, it emits a high-frequency electro-magnetic wave 5.8GHz and receives its echo. The sensor detects the change in echo from movement in its detection zone. A microprocessor then triggers the switch light ON command. Movement detection is possible through doors, panels of glass or thin walls. Note: the high-frequency output of this sensor is

5W 7W Thermal Plastic Battery Operated LED Emergency LED Light Bulb Double purpose of led light bulbs with internal battery whch switch automatically as emergency light in case of power off Perfect for power failure emergency light and residential light bulb, it may last 4-5 hours when power failure. Newest design with hook button, Power onoff by wall switch or hook switch. Energy saving and multi functional, Can be used as a bulb and flashlight. It can be used as a camping light, fishing light, hiking, very portable and useful for home use, indoor, outdoor application. FEATURE Works with standard E26E27B22 light bulb fixture Turns ONOff from the wall switch during power outages. Rechargeable emergency bulb with internal lithium battery, emergency 5-6 hours. When AC power supplies, battery can be charged anytime, simply pull the  Includes a built in Rechargeable battery Charges during normal use Charge only mode to charge the battery without glowing the bulb Easy to install and use Energy Efficient , CE, ROHS Compliant Works Even During Power Outages Never Be In the Dark Again! Technical Parameter MODEL AM-QP-07YJ Material    Aluminum heat sink, polycarbonate cover Type Emergency rechargeable bulb Power Consumption    7w (when on) and 1.5-3w (Emergency) Base Screw (E27E26) or Bayonet cap (B22) ColourTemperature Cool white (6500K) CRI >70 BeamAngle 120° LightOutput 350lumens Dimensions 70mm * 125mm Installation 

7w motion sensor lamp sound and light control auto smart detection lampada movimento luz cold white ce rohs motion sensor led lamp, motion sensor lamp for corridor, basement, stairwells, library, gallery. Etc.  allmay led light get high quality light with minimal power consumptionthe motion sensing light bulb is ideal for installation in various places due to it its motion detection mechanism. the led technology ensures it doesn't produce much heat thus extended its life span, brighter light,  and longer service life.in fact, it consumes just 20% of the regular incandescent bulb and lives ten times longer. you can use it at home, office and other places. the microwave motion sensing mechanism allows it to light on and off upon detecting human movement. Feature the bulb is extremely affordable compared to other options the sensitivity range of this fixture is up to 12 feet it is able to sense any movement within all directions suitable for use in a number of locations around the home or office longer lifespan than other bulbs high quality, bright led light dusk to dawn detection ability to install in any interior space with ease feature energy saving & high sensitivity built-in microwave motion sensor greater than 60 watt halogen polycarbonate for extra strength available in bc & es caps 2 years warranty ce, rohs certified stays on for 30 seconds after movement detected technical parameter model am-qp-07 material aluminum heat.

Motion Sensing T8 Integrated LED Tube with Microwave Sensor With the T8 Integrated LED, You'll never have to flick on a light switch again. This model is based off the same design as the T8 Integrated LED, But with motion sensing capabilities. The motion sensing globe detects movement and switches on immediately. After 30s or 1min of inactivity, the light will switch off. Installing is simple too; just use the mounting clips to directly mount onto any surface or suspend from the ceiling. This is commonly applied in entryways to easily access your overhead lighting. Description: Excellent thermal management with heat-dissipating aluminium PCB & housing - prolong LED life span High Purity aluminum housing and shatterproof PC lens Wide voltage range Widely used in office, Supermarket, Facotyr, Warehouse, Hotel, Parking lot etc. Premium Grade SMD LEDs with long-lasting lumen stability Integrated design with built-in Microwave sensor. Long life time over 35, 000 hours Sensor Tube turns on with 100% when a vehicle person passes by within 6-10 meters After Approx 30 seconds, the sensor tube resumes standby mode with 0% ( OR 30% brightness ). (factory default) Features: The ultimate in energy-efficient tube lighting Full brightness when movement detected dropping to 20% brightness in standby mode (no movement).  In-built microwave motion sensor. Much more effective than previous PIR sensors.

E27E26 LED Microwave Motion Sensor Bulb Light is a perfect lamp for outdoor application. it adopts microwave Radar Sensor theory, High sensitivity sensor that receives human movement and switches the light on and off automatically. Save energy up to 90% comparing with traditional fluorescent 2D fittings. Ideal as a security light. worksbest in areas like entryways, hallways, passageways, stairwells, carports, porches and verandahs. The sensor will operate through glass, plastic and wood and should be adjusted at installation to achieve the required sensitivity.  FEATURE: Onoff function Integrated Photocell-Daylight Sensor Directly connected to the mains Energy saving & High sensitivity Built-in Microwave Motion Sensor Greater than 40 watt halogen Poly carbonate for extra strength Available in 7w Cool or Warm White Available in B22 E27 E26 Base Easy to install, simple to use Multiple applications, inside and out Secuirty light that saves energy Stays on for 30 seconds after movement detected Technical Parameter MODEL AM-QP-07 Material    Aluminum heat sink, poly carbonate cover Sensor     Microwave Power Consumption    7W Base  Screw (E27 E26) or Bayonet cap (B22) Colour Temperature Cool white (6500K) Beam Angle 120° Light Output 400lumens Dimensions 70mm * 116mm Installation     Self installation Voltage     85-265VAC Sensor Range Approx 8m Time Delay

White Universal Oyster IndoorOutdoor Sensor Ceiling Light is both indoor and outdoor rated and can be used in many areas around the home for secuirty. can be wall or ceiling mounted, and is highly energy efficient as the light will only activate if movement is detected and remain on for the time period set. Unlike a PIR sensor, a microwave sensor can see through constructions, allowing it to be neatly concealed inside the fitting and making it ideal for use in outdoors and stairwells, its IP44 rating makes this light suitable for both indoor and outdoor use.  FEATURE 12W equivalent to 24W fluorescent Cool White (4000k) light colour Average life expectancy 30, 000 hours + 3 year guarantee Microwave movement sensor with up to 12 meters and 360° detection range Suitable for wall or ceiling mounting Time on adjustable between 8 seconds and 10 minutes Optional corridor function - can be set to keep the lamp on at 10% when not in use Auto Switch onoff when motion activated motionless Energy efficient, Eco friendly, Easy to install.Low power consumption.  Much more effective than previous PIR sensors Technical parameters - 12W LED Round Microwave Sensor Ceiling Light Power consumption 12 W  Fluorescent equivalent 24 W Input voltage     85-265 VAC, 50-60 Hz Power factor     >0.6 Lumen output     840 lm  Color temperature     4000K Color rendering index (CRI) >70 Composition-diffuser

DC AC 36V 7W Low voltage Motion Sensor LED Bulb  is highly efficient, The amount of light you get for only 7 watts will suprise you, the standard edison screw base is corrosion resistant and suited for marine applications. The sofe daylight colour resembles that of an incandescent , which is great for people wanting to replace them! This light is fantastic for boats or trains running 36v systems. Not only does this LED light replace a 65 watt incandescent, it lasts up to 5 times longer as well! The bulb is perfect for Boats, Trains, Solar-powered, Mine application.  Our LED Sensor bulb is a unique unit with an inbuilt motion sensor. This will detect any movement object up to 6-10 meters away enabling automatic operation. FEATURE: Energy saving & High sensitivity Built-in Microwave Motion Sensor Greater than 65 watt halogen Polycarbonate for extra strength Available in BC & ES Caps 1 Year Warranty CE, ROHS Certified Stays on for 30 seconds after movement detected (adjustable) Technical Parameter MODEL AM-QP-36v Material    Aluminum heat sink, polycarbonate cover Sensor     Microwave Motion Sensor Power Consumption    7w (when on) and 0.1w (sensor only) Base  Screw (E27) or Bayonet cap (B22) ColourTemperature Warmwhite (2700K) BeamAngle 120° LightOutput 400lumens Dimensions 70mm * 125mm Installation     Self installation Voltage     85-265VAC Sensor Range Approx 6-10m

Built In Automatic ONOFF LED Light Sensor Bulb has amazing built in ONOFF features which enables it to light up during night time and turn off during daytime without human control, Allmay Magic Sense Light Sensor Bulb controls the light output intelligently whenever the surrounding light output is under 10 lux. Allmay Magic Sensor can be an ideal usage in enclosed post light fixture. FEATURE: Built with high quality SMD 2835 LED chip Light sensor lamps which can detect light output under 10 lux Supports lifetime about 30, 000 hours Detection angle 360 degree, excellent CRI>80 and beam angle >120 degree Available in 3 color temperature of 2700K, 4000K, 6500K Instant ON, NO UV, No IR radiation in the light beam. Application: Outdoor parks and garden, Enclosed post light fixture. Technical Parameter MODEL AM-QP-06 Material    Aluminum heat sink, polycarbonate cover Sensor     Photocell  Power Consumption    5W Base  Screw (E27) or Bayonet cap (B22) ColourTemperature Warmwhite (2700K) BeamAngle 120° LightOutput 400lumens Dimensions 70mm * 125mm Installation     Self installation Voltage     85-265VAC Time Delay     half an hour ( to be customized) LED brand SANAN LED Lifetime 50, 000hours Caurtion Switch off the main supply before inspection and installation Not suitable for use in totally enclosed fixtures. Store and use the lamps the same way as traditional lamp.

Led linear lighting hanging light for office, factory, shopping malls. Features: splash-proof and dust-proof cover (diffuser) for indoor or outdoor use in covered areas three ceiling mount installation: flush mount, hang hook, or hanging with cable. Housing: aluminum housing lens assembly: polycarbonate lens built-in smart microwave motion sensor (optional)  instant start and flicker-free, glare free wider beam angle. energy efficient technical parameters - led linear suspension with microwave motion sensor power consumption 18w (full) 3w (dim) input voltage     85-265vac, 50-60hz power factor     0.92 lumen output     900lm bright mode230lm standby mode color temperature     6500k color rendering index (cri) >70 beam angle 120 ° composition-diffuser & casting polycarbonate operating temperature -20 to +50 ° c service life 35000+hours detection angle  180 °*360 ° detection zone  up to 8 m standby power consumption

Led t8 tube with microwave motion sensor has a sleep function, which is onoff mode, our tube are an ideal product for corridors, staircases, passageways and other places where light is needed only for a certain amount of time. Led tube automatically turns on when it detects movement, and after its disappearance it switches to standby mode (that consumes only 30% power) built-in microwave motion detector has a great range than infrared sensors (pir sensor), it has no dead zones, and its operation is independent of temperature or dirt presence. Matt covering provides the correct light distribution and reduce glare . Features: the ultimate in energy-efficient tube lightingfull brightness when movement detected dropping to 20% brightness in standby mode (no movement). in-built microwave motion sensor.much more effective than previous pir sensors. Easy to install, allmay led tube fits into your existing fluorescent t8 light fixture.poly-carbonate and aluminium construction.low energy alternative to a standard fluorescent battenultra-bright leds: low power consumption with enhanced life expectacyslim design: offers a more stylish and modern solution to traditional battensapplications:  ideal for areas where traffic is infrequent but background lighting is still important for safety and security. Car-parks, staircases, corridors & walkways. Warehouses and distribution centers. Basements, washrooms, entrances & exits.

5W 24LEDs Warm White Retrofit LED Corn Bulb for HouseholdGardenYardPost Lighting  This LED Corn Bulb gives you up to 400 lumens of light, Create a cozy and warm environment similar to halogen or incandescent lamps. Built-in Microwave Motion Sensor: Automatically light onoff or fulldim standby. Very intelligent and energy-saving. Beam angle: a wider beam angle offers greater coverage Better for these place: Perfect for the indoor lighting, such as home, bedroom, living room, hallway, hotel, kitchen, restaurant, hotel, library, showroom and many other application lighting. Energy saving: Very Low energy consumption---Save up to 80% compare to traditional bulbs. Connector type: E27 B22 Input Voltage: AC90-265v Output power: 5W Equivalent Fluorescent lamp: 40W Output Lumen: 300-400lm Color Temperature: 2700-6500K (warm whitecool white) Sensor distance : 6-8 meters Human Sensor Range: 180 degrees maximum   Sensor type A: when detect movement 100% lighting on, no movement stand by status 0% lighting   Sensor Type B: when detect movement 100% lighting on, no movement stand by status 30%lighting Working mode you can choose: A: onoff  B: 100% brightness 30% brightness                100% brightness output 5W           30% brightness 1.5W (stand by status) Technical Parameter MODEL AM-HC-0501 Material    Aluminum heat sink, polycarbonate cover Sensor.

Emergency t8 led tube light with battery smd2835 96leds 4ft 18w, g13 works without a ballast! fluorescent replacement light lamp built-in constant current driver, stability and keep light work long time, adopt grade a smd as light source, high lumen, no flicker and ultraviolet rays, can protect environment and human body well. With lithium battery inside, when full charged it can continuously work for 140 minutes.   aluminuous body and pc cover, high quality aluminum better for heat dissipation,   easy to install , direct replacement of cfl, the tube light can be connected with ac110220v.  feature  140 minutes in-built emergency battery proprietary driverless led technology reduced energy consumption by 50% vibration and impact resistant longer lifespan >30000 hours 2 years warranty no harmful uv rays instant on off automatic switching to and from battery load t8 4ft led emergency tube technical specifications led rechargeable emergency light is for replacement of fluorescent lamp in case of emergency lighting. Model am-8d605yj am-8d905yj am-8d1205yj length 60cm (2 feet) 90cm (3 feet) 120cm (4 feet) power (routine)     9w 14w 18w power (emergency)     2-4w emergency duration 2-3 hour weight 320g  350g 400g diffuser     frost light decay

G24 e27 microwave motion sensor led corn bulb retrofit lighting project with built-in microwave radar motion sensor, it will light on with full brightness (100%) when someone or car enter into the detection zone.  and last for 20-30 s with full brightness. After person or car left, the light will turn off automatically. ( or 30% dim brightness)    our corn bulb has a long lifespan, easy to install, green and environmental friendly with its low power consumption, the led corn light is perfect for use in a garage, shed, light post, deck, or anywhere you need light. No dead zone, not infected by temperature, dust. Is possible through glass, plastic, wood, thin wall.  feature: energy saving & high sensitivity built-in microwave motion sensor high quality and simple installation replacement of traditional halogen lamp. Available in bc & es caps stays on for  20 seconds after ambient brightness detected.  widely application --great for garage, warehouse, barn, patio, courtyard, garden, office, school, hospital, shopping mal, restaurant, hotel, workshop etc.  technical parameter model am-hc-0501 material    aluminum heat sink, polycarbonate cover sensor     microwave sensor + light sensor (optional) power consumption    5w base  screw (e27) or g24 colourtemperature warmwhite (4000k) beamangle 120° lightoutput 300lumens dimensions 40mm * 115mm installation self.

Smart90% cost savings led corn bulb e27 5w movement sensor retrofit dimmable led lights is perfect for hallway, stairway and common area lighting, making it ideal for: apartment and other residential complexes commercial premises, such as warehouses car parks back stairwells and emergency exits (allmay lighting guarantees no "dark areas" and its 10% energy setting guarantees constant light, illuminating to 100% when motion is detected). Our corn bulb has a long lifespan, easy to install, green and environmental friendly with its low power consumption, the led corn light is perfect for use in a garage, shed, light post, deck, or anywhere you need light. Feature: energy saving & high sensitivity built-in microwave motion sensor high quality and simple installation replacement of traditional halogen lamp. Super fast microwave detection (no dark areas) available in bc & es caps stays on for 20 seconds after ambient brightness detected.  widely application --great for garage, warehouse, barn, patio, courtyard, garden, office, school, hospital, shopping mal, restaurant, hotel, workshop etc.  technical parameter model am-hc-0501 material    aluminum heat sink, polycarbonate cover sensor     microwave sensor + light sensor (optional) power consumption    5w base  screw (e27) or g24 colourtemperature warmwhite (4000k) beamangle 120° lightoutput 300lumens dimensions 40mm * 115mm installation

E27 Plastic LED Intelligent Emergency Light Bulb  Perfect for power failure emergency light and residential light bulb, it may last 4-5 hours when power failure. Newest design with hook button, Power onoff by wall switch or hook switch. Energy saving and multi functional, Can be used as a bulb and flashlight. FEATURE Works with standard E26E27B22 light bulb fixture Turns ONOff from the wall switch during power outages. Rechargeable emergency bulb with internal lithium battery, emergency 5-6 hours. When AC power supplies, battery can be charged anytime, simply pull the  Includes a built in Rechargeable battery Charges during normal use Charge only mode to charge the battery without glowing the bulb Easy to install and use Energy Efficient , CE, ROHS Compliant Works Even During Power Outages Never Be In the Dark Again! Technical Parameter MODEL AM-QP-07YJ Material    Aluminum heat sink, polycarbonate cover Type Emergency rechargeable bulb Power Consumption    7w (when on) and 1.5-3w (Emergency) Base Screw (E27E26) or Bayonet cap (B22) ColourTemperature Cool white (6500K) CRI >70 BeamAngle 120° LightOutput 350lumens Dimensions 70mm * 125mm Installation     Self installation Voltage     85-265VAC LED brand SANAN LED LED QTY 36 pcs SMD2835 Battery type Rechargeable Lifetime 50, 000hours Lens     Frosted Function 1: Use as normal LED bulb for lighting Function 2: Use as emergency LED.

1200mm 18W LED Tube with Integrated Microwave Sensor Dimming via built-in Microwave Sensor for superior energy efficiency The Ultimate in energy-efficient tube lighting. Automatically dims to 30% brightness in the absence of human traffice ( 18W reduces to only 3-5 Watts) New Microwave Sensor Technology Normally operates in standby mode, providing background light levels at 350lm. Sensor will detect the slightest movement within approx 8 meters. Output then brightens to 1800lm for 30 seconds before returning back to standby mode, unless further human movement is detected. Light will remain bright for people who stay in the area, even if they make only minor movement. Features: The ultimate in energy-efficient tube lightingFull brightness when movement detected dropping to 20% brightness in standby mode (no movement). In-built microwave motion sensor.Much more effective than previous PIR sensors. Easy to install, Allmay LED Tube fits into your existing fluorescent T8 light fixture.Poly-carbonate and aluminium construction.Low energy alternative to a standard fluorescent battenUltra-bright LEDS: low power consumption with enhanced life expectacySlim design: offers a more stylish and modern solution to traditional battens Technical parameters - LED Tube with Microwave Motion Sensor Power consumption 18w in bright mode 3w in standby mode Fluorescent T8 tube equivalent 36w Input voltage     85-265VAC, 50-60Hz Power factor

120cm 4ft Radar Motion Sensor T8 LED Tube Eliminates wasted power in low traffic areas when bright light is not required. Power consumption drops from 18W to 4.5W in standby mode. When needed, the light output is an extra bright 1800 lumen with superios light quality. In the absence of human traffic, tube automatically dims to 30% of its maximum output. New Microwave Sensor Technology Normally operates in standby mode, providing background light levels at 350lm. Sensor will detect the slightest movement within approx 8 meters. Output then brightens to 1800lm for 30 seconds before returning back to standby mode, unless further human movement is detected. Light will remain bright for people who stay in the area, even if they make only minor movement. Features: The ultimate in energy-efficient tube lightingFull brightness when movement detected dropping to 20% brightness in standby mode (no movement). In-built microwave motion sensor.Much more effective than previous PIR sensors. Easy to install, Allmay LED Tube fits into your existing fluorescent T8 light fixture.Poly-carbonate and aluminium construction.Low energy alternative to a standard fluorescent battenUltra-bright LEDS: low power consumption with enhanced life expectacySlim design: offers a more stylish and modern solution to traditional battens Technical parameters - LED Tube with Microwave Motion Sensor Power consumption 18w in bright mode 3w in standby mode Fluorescent T8 tube equivalent 36w

9W T8 LED Tube with Motion Detector Auto Turns OFF uses a radar motion detection system, emits a brightness of 900 lumens, has a 30, 000 hour lifespan and comes with a translucent cover. Thanks its incorporated radar sensor, the light turns ON whenever it detects movement at a 180 angle and at a distance of 8 meters. The tube turns OFF when no motion is detected within range ( 180° and 8 meters), and 20 or 30 seconds have passed. The radar sensor has high accuracy and range and can be used in enclosed fixture. Features: The ultimate in energy-efficient tube lightingFull brightness when movement detected dropping to 20% brightness (or off 0% ) in standby mode (no movement).  In-built microwave motion sensor.Much more effective than previous PIR sensors. Easy to install, Allmay LED Tube fits into your existing fluorescent T8 light fixture.Poly-carbonate and aluminium construction.Low energy alternative to a standard fluorescent battenUltra-bright LEDS: low power consumption with enhanced life expectacySlim design: offers a more stylish and modern solution to traditional battens Applications:  Ideal for areas where traffic is infrequent but background lighting is still important for safety and security. Car-parks, staircases, corridors & walkways. Warehouses and distribution centers. Basements, washrooms, entrances & exits. Technical parameters - LED Tube with Microwave Motion Sensor Power consumption 9W in bright mode Equivalent 120 Watt

Mini Rechargable LED Light for Camping Hiking Fishing FEATURE The light has 3 levels of brightness + 1 emergency flash mode  10%(dim),   50 %(normal), 100%(supernova) and SOS Red&Blue Flashing with a 0.4 seconds duty cycle. which allows you to preserve battery power when needed. Perfect as a camping tent light, keyboard light, evening walks light - plenty of illumination for walking in the dark plus a quick change to flash provides ample warning for oncoming cars.   Easy to carry and hang on anywhere. The Light has a built-in long life rechargeable 2000mAh Li-ion battery, which can be charged over 500 times via a included mini-USB cable, just charges via the USB port on a computer, an AC adapter, or a powerbank battery. - tons of ways to charge this light, even when there is no electricity. Quickly Full Charged in 3 to 4 hours can last from 3 to 72 hours depending on which brightness level you have set. The LEDs have a lifespan of 36000 hours which is 24+ years when used for 4 hours a day every day. TECHNICAL SPECIFICATION MODEL: ALLMAY Material: Aluminum ABS PC LED chips: 2835 Power: Max 2W CCT: 6500K Battery: Lithium 3.7V, 2000mAh Charging time: 3-4 hours

Features: splash-proof and dust-proof cover (diffuser) for indoor or outdoor use in covered areas three ceiling mount installation: flush mount, hang hook, or hanging with cable. Housing: aluminum housing lens assembly: polycarbonate lens built-in smart microwave motion sensor instant start and flicker-free, glare free wider beam angle. energy efficient option sensing mode: sensor type a: onoff mode (100%~0% brightness standby) the led light will turn on automatically when motion activated, and last for 18-25s, then turn to off with no motion. Sensor type b: fulldim mode (100%~20% brightness standby)  the led light will turn on automatically when motion activated, and last for 18-25s, then turn to 20% brightness with no motion.  applications:  the led linear light with smart sensor control is the only light you need for hands-free lighting in any home, workspace, garage space, covered patio, office, and more. Technical parameters - led linear suspension with microwave motion sensor power consumption 18w in bright mode 2-4w in standby mode input voltage     85-265vac, 50-60hz power factor     0.92 lumen output     900lm bright mode230lm standby mode color temperature     6500k color rendering index (cri) >70 beam angle 120 ° composition-diffuser & casting polycarbonate operating temperature -20 to +50 ° c service life 35000+hours detection angle  180

Feature Super Bright (35 Bright LEDs) No wiring necessary; solar energy powered Energy-saving and High-efficiency Solar Panel Durable, Weather-resistant & heatproof plastic construction Easy installation; just mount it on the wall with the included screw. Automated switch - Auto on at night auto off at sunrise; Dim light when no motion Bright light activates when sensing motion.   Technical parameters Product name Solar LED light with microwave motion sensor  Model No. AM-S8 Material Heat resistance&Shatterproof ABS plastic shell. Solar Panel  6V330mA, 2.4w Monocrystalline silicon LED Source High Lumen SMD2835*35PCS Lumen output     250 lm  Color temperature     6500K Color rendering index (CRI) >70 Composition-diffuser & casting PMMA + Frosted Lens Output power     3.5w (full) 0.5w (dim) Battery 3.7v 2600mAh Lithium battery Charging time      7-8 hours fully charged by sun Recharging time     >9hours from Dusk to Dawn Operating temperature -20 to +50 ° C Service life 35000+hours Detection angle  120 ° Detection zone  up to 8 m Dimension     190*120*68mm Sensor mode Daylight Sensor+Radar Sensor Working mode Option 1: 100%Dim;  Option 2: ONOFF; Sensor Range 180*360 degree Sensor Distance 6-8m adjustable Delay Time 18-25s (adjustable)

35 LED Solar Motion Sensor Light, Wireless LED Garden Security Home Light Feature Super Bright (35 Bright LEDs) Fully weather resistant and can be mounted almost anywhere. All in one design, No wiring necessary; solar energy powered Energy-saving and High-efficiency Solar Panel Detection distance: 6-10 meters, detection range: 180 degrees Durable, Weather-resistant & heatproof plastic construction Easy installation; just mount it on the wall with the included screw. Automated switch - Auto on at night auto off at sunrise; Dim light when no motion Bright light activates when sensing motion.   Technical parameters Product name Solar LED light with microwave motion sensor  Model No. AM-S8 Material Heat resistance&Shatterproof ABS plastic shell. Solar Panel  6V330mA, 2.4w Monocrystalline silicon LED Source High Lumen SMD2835*35PCS Lumen output     250 lm  Color temperature     6500K Color rendering index (CRI) >70 Composition-diffuser & casting PMMA + Frosted Lens Output power     3.5w (full) 0.5w (dim) Battery 3.7v 2600mAh Lithium battery Charging time      7-8 hours fully charged by sun Recharging time     >9hours from Dusk to Dawn Operating temperature -20 to +50 ° C Service life 35000+hours Detection angle  120 ° Detection zone  up to 8 m Dimension     190*120*68mm Sensor mode Daylight Sensor+Rada

Outdoor Security Solar Light, 35 LED Solar Powered Light, Feature Super Bright (35 Bright LEDs) Fully weather resistant and can be mounted almost anywhere. All in one design, No wiring necessary; solar energy powered Energy-saving and High-efficiency Solar Panel Detection distance: 6-10 meters, detection range: 180 degrees Durable, Weather-resistant & heatproof plastic construction Easy installation; just mount it on the wall with the included screw. Automated switch - Auto on at night auto off at sunrise; Dim light when no motion Bright light activates when sensing motion.   Technical parameters Product name Motion Sensor LED Garden Solar Light Model No. AM-S8 Material Heat resistance&Shatterproof ABS plastic shell. Solar Panel  6V330mA, 2.4w Monocrystalline silicon LED Source High Lumen SMD2835*35PCS Lumen output     250 lm  Color temperature     6500K Color rendering index (CRI) >70 Composition-diffuser & casting PMMA + Frosted Lens Output power     3.5w (full) 0.5w (dim) Battery 3.7v 2600mAh Lithium battery Charging time      7-8 hours fully charged by sun Recharging time     >9hours from Dusk to Dawn Operating temperature -20 to +50 ° C Service life 35000+hours Detection angle  120 ° Detection zone  up to 8 m Dimension     190*120*68mm Sensor mode Daylight Sensor+Radar Sensor Working mode Option

7W Rechargeable Intelligent Emergency LED Bulb Lamp is an Energy Efficient LED Bulb that works even during power outages. It includes a rechargeable battery which provides minumum 3.5 hours of light when the power goes out. It does not require any rewiring and can be used with standard E26E27B22 light bulb fixutres. easy to use : simply replace the 40 watt bulbs in your home with rechargeable energy saving light bulbs. FEATURE Works with standard E26E27B22 light bulb fixture Turns ONOff from the wall switch during power outages. Provides minumum 3.5 hours of light during a Power outage Includes a built in Rechargeable battery Charges during normal use Charge only mode to charge the battery without glowing the bulb Easy to install and use Energy Efficient , CE, ROHS Compliant Works Even During Power Outages Never Be In the Dark Again! Technical Parameter MODEL AM-QP-07YJ Material    Aluminum heat sink, polycarbonate cover Type Emergency rechargeable bulb Power Consumption    7w (when on) and 1.5-3w (Emergency) Base Screw (E27E26) or Bayonet cap (B22) ColourTemperature Cool white (6500K) CRI >70 BeamAngle 120° LightOutput 350lumens Dimensions 70mm * 125mm Installation     Self installation Voltage     85-265VAC LED brand SANAN LED LED QTY 36 pcs SMD2835 Battery type Rechargeable Lifetime 50, 000hours Lens     Frosted Function 1: Use as normal LED bulb for lighting Function 2: Use as emergency

2700K G13 Microwave Sensor T8 LED Retrofit Tube for Carpark operates with a built-in Microwave Sensor to one end of this LED Tube, detecting movement objects. The Microwave Sensor has an induction angle of 120 degrees with up to 6-8 meters in range. The sensor can be activated by either a car or a person moving towards the light source. Once motion is detected the lux lumen will increase from 30% to 100%.  The potential savings are 85-90% and lasts 20 times longer than conventional fluorescent tubes in 24 hours operating environment.    Features Luminous efficiency up to 90LmW High quality polycarbonate diffuser with excellent light transmittance and uniform light distribution UV stabilized and resistant to high temperature operation New aluminum base plate and oval design for excellent thermal control Live only on one end for circuit safety Wattage options: 9W, 14W, 18W Color Temperature options: 2700K, 4000K, 6000 Built-in LED Driver with Microwave Motion Sensor CRI>80 Average lifespan > 30000 Hrs Power Factor: >0.9 SPECIFICATIONS – Smart Microwave Sensor LED Tube Product :       AM-8D1205Y Power (Full) :  18W (at 100% luminance, when triggered by motion) Power (Standby) : 3-5W (at 30% luminance, when NOT triggered by motion) Detection Range : 6 to 8 metres Sensor Detection Angle : 360° (installed on ceiling) , 180° (installed on wall) Standby Mode Lux Options : 0%, 30% (Factory Standard)

4W 5W 7W Warm Cool White LED Security Microwave Motion Sensor Light Bulb Only turn on at Night or Dark Environment when motion is detected. Motion Sensor LED Smart Light Bulb Auto Microwave Motion Detection Home Lighting Lampor Bulb Smart Sensor-----Switch on by motion detection at dark envrionment Endurable---The housing material of the bulb is splashproof, pretty endurable, very hard to be broken. Energy efficiency-----This 7W LED Light is equal to a 40-60W halogen lamp light output, save 80% energy Easy installation----No wiring or installing switches, easy to be set up. Built-in Motion Sensor automatically turns on when it detects any motion, and automatically turns off after 30-60 seconds. Motion detecting range: approx. 6-8 meters, E27 standard socket, easy to install and dismantle. High Sensitivity - This product can detect the slightest movement, such as lifting arm, turning round, stoop, and so on. Invisible - Since the detection is not affected by the obstacles, such as glass, plastic, wooden, thin wall, the microwave sensor can be built in other lighting fixtures.  Technical Parameter---7watt LED Motion Sensor LED Globe Bulb Base: E26E27 (Medium) Bulb Type: A19 (Standard) Dimmable: No LED Quantity: 36 LEDs Lifetime: 40000 Hours Total Power Consumption:7Watts Operating Voltage Range: 90-265 VAC Beam Angle: 120 degree Comparable Wattage: 35-40 Wattts Efficacy: 80 lmW Lens Color: Diffused Lumen: 560 Lumen Color: 2700K~6000K Wide of Application Front door

Led tube t8 1200mm 18w radar sensor 18w t8 led tube 1200mm, cool whitewarm white, microwave radar sensor, the new led t8 tube includes new led light smd2835 with high power chip and integrateds radar motion sensor that brings new functionalities. How do they work? 1. When an object approaches led radar sensor tube at an angle of 120° and a radius of 1-8 meters detection, the microwave sensor detects it automatically and operates the tube at full power. 2. Once the object leaves the range of the tube and has spent a time of 20-30 seconds, the lower tube approximate 30$ of the total luminosity, with a consumption of only 2-5w, providing a courtesy light more than enough with minimum consumption, this being greater light than that offered by any other emergency lighting system, this mode ensures maximum savings of electricity. 3. Unlike the other tubes with ir sensor, radar sensor sensitivity provides greater accuracy and with powerful. Features luminous efficiency up to 90lmw high quality polycarbonate diffuser with excellent light transmittance and uniform light distribution uv stabilized and resistant to high temperature operation new aluminum base plate and oval design for excellent thermal control live only on one end for circuit safety wattage options: 9w, 14w, 18w color temperature options: 2700k, 4000k, 6000 built-in led driver with microwave motion sensor cri>80 average lifespan > 30000 hrs power factor: >0.9 specifications – smart microwave sensor led

T8 led microwave radar sensor led tube light 18w t8 led tube 1200mm, cool whitewarm white, microwave radar sensor, the new led t8 tube adopt aluminum and environmental pc material, 2835 led smd, high brightness, high cri. brings new functionalities.  radar sensor motion, when people or object enter the sensor range ( 6-8m radius), the light will work at full brightness, and when they get out of the range, the light will work at a low wattage of 3-5w unlike the other tubes with ir sensor, radar sensor sensitivity provides greater accuracy and with powerful. Features luminous efficiency up to 90lmw high quality polycarbonate diffuser with excellent light transmittance and uniform light distribution uv stabilized and resistant to high temperature operation new aluminum base plate and oval design for excellent thermal control live only on one end for circuit safety wattage options: 9w, 14w, 18w color temperature options: 2700k, 4000k, 6000 built-in led driver with microwave motion sensor cri>80 average lifespan > 30000 hrs power factor: >0.9 specifications – smart microwave sensor led tube product :       am-8d605y power (full) :  9w (at 100% luminance, when triggered by motion) power (standby) : 2-4w (at 30% luminance, when not triggered by motion) detection range : 6 to 8 metres sensor detection angle : 360° (installed on ceiling) , 180° (installed on wall) standby mode lux options : 0%, 30% (factory standard)

18W LED T8 Tube Light with Microwave Sensor 1. Four Feet 18W LED tube light equivalent to 200W bulb, or 32W fluorescent tube. 2. Microwave Sensors switch on the light when motion is detected to allow for cost effective automatic lighting. 3. Suitable for car parks, corridors, bathrooms, store rooms, underground parking lot. alleyways. etc. 4. Two year warranty and more than 50, 000 hours LED lifespan. Features: The ultimate in energy-efficient tube lightingFull brightness when movement detected dropping to 20% brightness (or off 0% ) in standby mode (no movement).  In-built microwave motion sensor.Much more effective than previous PIR sensors. Easy to install, Allmay LED Tube fits into your existing fluorescent T8 light fixture.Poly-carbonate and aluminium construction.Low energy alternative to a standard fluorescent battenUltra-bright LEDS: low power consumption with enhanced life expectacySlim design: offers a more stylish and modern solution to traditional battensApplications:  Ideal for areas where traffic is infrequent but background lighting is still important for safety and security. Car-parks, staircases, corridors & walkways. Warehouses and distribution centers. Basements, washrooms, entrances & exits. Technical parameters - LED Tube with Microwave Motion Sensor Power consumption 18W in bright mode 2-4W in standby mode Input voltage     85-265VAC, 50-60Hz Power factor     0.92 Lumen output

Security Light Microwave Motion Detector Auto Switch Sensor Long Range Wall Mounted is an innovative sensor switch which is built in Microwave Motion Sensor, Very energy-saving light swith, Not PIR sensor, It is used to sense movement of people, animals, cars or other objects, they can be used in automatically cativated lighting systems. It is weatherproof, high sensitivity, active motion detector, automatic, convenient, safe and practical.  FEATURE 360degree rotation Easy to install and fit. The motion sensor can identify day and night automatically. Strong anti-interference and reliability, security and convenience. Features of intelligent detection and delay time. Time delay Lux Sensor Detection distance Adjustable. Built-in Photocell brightness sensor Wide application range: can be used in incandescent lamp(bulb), energy saving lamp, LED Lights, fluorescent lamp. Technical Specification Model: AM-TG-02 Color: Black Material: ABS Operating Voltage: 85V-265V AC  5060Hz Microwave Frequency: 5.8Ghz Working Rotation: 360°  Reaction Time: 0.5s Rated Load: 1-200W (100w110v) Transmission power:

2017 New Released Indoor Portable 4W mini Solar Lighting, Solar Motion Sensor Light With high lumen and 35 pieces Long range SMD LED, This Solar Light can be used in home lighting, House, Front door, Patio,   Yard, Garden, etc,   Feature Super Bright (35 Bright LEDs) Very easy to install, can be Ceiling or wall mounted almost anywhere in your house, Shed, front door,   Automatically works from Dusk to Dawn at good sunshine Energy-saving and High-efficiency Solar Panel Detection distance: 6-10 meters, detection range: 180 degrees Durable, Weather-resistant & heatproof plastic construction Easy installation; just mount it on the wall with the included screw. Automated switch - Auto on at night auto off at sunrise; Dim light when no motion Bright light activates when sensing motion.   Technical parameters Product name 35 LEDs Rechargeable Solar Powered Light with Motion Sensor Model No. AM-DG05 Material Heat resistance&Shatterproof ABS plastic shell. Solar Panel  6V330mA, 2.4W Monocrystalline silicon LED Source High Lumen SMD2835*35PCS Lumen output     250 lm  Color temperature     6500K Color rendering index (CRI) >70 Composition-diffuser & casting PMMA + Frosted Lens Output power     3.5W (full) 0.5W (dim) Battery 3.7v 2600mAh Lithium battery Charging time      7-8 hours fully charged by sun Recharging time     >9 hours

7W Motion Sensor Bulb, Microwave LED Sensor Bulb, Built-in Microwave Sensor High Environmental Adaptability - The microwave motion sensor has high reliability, its detection range is less affected by temperature, wind, airflow, sound, light, fog, smoke, dust, etc. High Sensitivity - This product can detect the slightest movement, such as lifting arm, turning round, stoop, and so on. Invisible - Since the detection is not affected by the obstacles, such as glass, plastic, wooden, thin wall, the microwave sensor can be built in other lighting fixtures.  How does it work? This motion sensor light bulb will KEEP lighting for 30s Per First installed without detecting any motion in sensor area, afterh the bulb turns off automatically, it only turns on in the dark and dusk when motion is detected. Features High power SMD LEDs deliverying up to 81 lumens per watt Automatically powers on when motion is detected Motion detetion range is within 8 meters Wide 180 degree sensor detection angle Applications include closet lighting, stairway lighting, storage room illumination, and garage lighting. Available in Warm white, and Cool white 7Watt total power consumption Low energy and maintenance cost No strobling or flickering Certifiably safe & environmentally sustainable Technical Parameter---7watt LED Motion Sensor LED Globe Bulb Base: E26E27 (Medium) Bulb Type: A19 (Standard) Dimmable: No LED Quantity: 36 LEDs Lifetime: 40000 Hours Total Power Consumption:7Watts Operating Voltage.

18W Rechargeable Emergency LED T8 Tube Light cuts energy consumption over standard fluorescent tubes, Engineered for long-lasting utility, these tubes feature a solid aluminum heat sink that runs the length of the lamp.The Lithium battery can be charged and discharged > 500 tims before replacing. FEATURE Built-in Lithium battery and driver Both mains supply and battery supply operation LED Emergency lighting Fire-resistant, high temperature resistant, thermal-insulation, anti-climate aging probongs tubes lifetime. 140 minutes at 3w by battery supply in emergency; Lithium battery: longer lifetime, over 500 times charging- discharging 2 years warranty Life time: >30000hours Index LED Tube 600mm LED Tube 1200mm Power 9w 18w LED Type 2835SMD 2835SMD Input Voltage 85-265vac 85-265vac Output voltage Beam angle 120° 120° CRI     70 70 Working temperature -20℃~50℃ -20℃~50℃ Emergency time 140 minutes 140 minutes Power 3w 3w Battery capacity     2000mAh     2000mAh    Charging time 6 hours 6hours Function Description The emergency LED T8 tube light can converses automatically between normal lighting and emergency lighting. if there is no mains supply. the battery will be in operation. Two modes are available. Mains supply mode: When the mains supply is connected, the LED tube can work as normal lighting for daily activities. The battery in external emergency driver is charging automatically.

4FT T8 LED Tube with Emergency Battery Backup Power is an all-in-one general purpose lighting and battery powered emergency backup TLED solution. The tube acts as a normal lamp, providing high lmw and supporting onoff switching operation and dimming. Upon loss of power, the batteries provide a minimum of 90 minutes of light, starting at half of the rated light and decreasing slowly over time. The standard input end powers the lamp in normal mode, and the emergency input end charges the batteries and senses the presence of AC power.  FEATURE Built-in Lithium battery and driver Both mains supply and battery supply operation LED Emergency lighting Fire-resistant, high temperature resistant, thermal-insulation, anti-climate aging probongs tubes lifetime. 140 minutes at 3w by battery supply in emergency; Lithium battery: longer lifetime, over 500 times charging- discharging 2 years warranty Life time: >30000hours Index LED Tube 600mm LED Tube 1200mm Power 9w 18w LED Type 2835 SMD 2835 SMD Input Voltage 85-265vac 85-265vac Light decay

Microwave Sensor LED Retrofit Recessed Downlight incorporate a low profile design and a built-in integrated bdriver and microwave sensor. it offers a true and naturial lighting with a Color Rendering Index (CRI) OF 80. This downlight donot contain mercury. The sensor downlights are perfect for use in a wide range of applications, including retail and office space, hotels, conference rooms, kitchens, bathrooms and corridors. With built-in Microwave Motion Sensor. It can automatically light on when motion detected. and light off without motion. very intelligent. Ideal for use in Recessed lighting applications. Feature Built-in Intelligent Microwave Motion Sensor Available with 2 hours Emergency Kits Professional lighting design, excellent uniformity High efficiency SMD LED chips Wide beam angle (140˚) and higher brightness. Suits existing or new 120mm ceiling cut-out. IP44 weatherproof Low profile and frosted flush finish. Available in 2700K (warm white), 4000K (neutral white), or 6500K (cool white) 50, 000 hours long life Overload, short circuit, under voltage protection Intelligent driver, security and stability. Ideal energy efficient lighting replacement for halogens. Technical specification Model AM-5.0GY Luminous flux 430-440lm Luminous Efficacy >60lmw Colour Rendering index 80 Beam Angle 140° Light Decay 35, 000 hours Power consumption 10 watts Input voltage Frequency 180v-265vac 50-60HZ Reflector Diffuser Frosted.

Microwave Sensor LED Retrofit Recessed Downlight, With built-in Microwave Motion Sensor, it has an induction angle of 140 degrees with up to 6-8 meters radius range. The sensor can be activated by a person or any moving objects toward the light source. Once motion is detected, the light will automatically be switched on 100% brightness, and it will be off or dim back to 20% brightness after no movement for 20-30 seconds. With its high performance and easy installation as stamdard, it can be used in a wide range of applications, including retail and office space, hotels, conference rooms, kitchens, bathrooms and corridors. Feature Built-in Intelligent Microwave Motion Sensor 2 hours Emergency Kits Available Professional lighting design, excellent uniformity High efficiency SMD LED chips Wide beam angle (140˚) and higher brightness. Suits existing or new 120mm ceiling cut-out. IP44 weatherproof Low profile and frosted flush finish. Available in 2700K (warm white), 4000K (neutral white), or 6500K (cool white) 50, 000 hours long life Overload, short circuit, under voltage protection Intelligent driver, security and stability. Ideal energy efficient lighting replacement for halogens. Technical specification Model AM-6.0GY Luminous flux 600-620lm Luminous Efficacy >60lmw Colour Rendering index 80 Beam Angle 140° Light Decay 35, 000 hours Power consumption 10 watts Input voltage Frequency 180v-265vac 50-60HZ Reflector Diffuser.

7W LED Cool White Bulb with Microwave Sensor  1. 7W LED Bulb, produce lights equivalent to 80W bulb.  2. Built-in Microwave Sensors detects motion and sound to allow for cost effective automatic lighting.   3. Suitable for car parks, corridors, bathrooms and any place where automatic lighting is needed.  4. 2 year warranty and more than 50, 000 hours LED lifespan. FEATURE: Built with high quality SMD 2835 LED chip Light sensor lamps which can detect light output under 10 lux Detection angle 360 degree, excellent CRI>80 and beam angle >120 degree Available in 3 color temperature of 2700K, 4000K, 6500K Instant ON, NO UV, No IR radiation in the light beam. Technical Parameter MODEL AM-QP-07 Material    Aluminum heat sink, polycarbonate cover Sensor     Microwave motion sensor Power Consumption    7W Base  Screw (E27) or Bayonet cap (B22) ColourTemperature  Cool white (6500K) BeamAngle 120° LightOutput 400lumens Dimensions 70mm * 125mm Installation     Self installation Voltage     85-265VAC Time Delay     18-25s ( to be customized) LED brand SANAN LED Lifetime 50, 000hours Caution Switch off the main supply before inspection and installation Not suitable for use in totally enclosed fixtures. Store and use the lamps the same way as traditional lamps Ambient temperature range -10°C to 40°C.

18Watt T8 LED Tube with Built-in Emergency & Motion Sensor This easy fit T8 Emergency LED tube comes with built in battery and motion sensor It has been designed with a new heat sink in order to solve heat problems with high output products, and also has high efficiency LED light performance and advanced durability case protection. 1. Multi – functional LED tube: compared with traditions emergency lights, emergency + sensor LED tubes not only can be used as general lighting, but also are used as microwave sensor or PIR sensor and emergency lights. One tube with multi – functions.  2. Built – in Lithium battery and driver: easy installation and saving labour cost.  3. Lithium battery: longer life time, green and over 1, 000 times charging – discharging.  4. Fire – resisting sleeves:  high temperature resistant, thermal-insulation, inflaming retarding & anti climate aging much prolong tubes life time. FEATURE Built-in Lithium battery and driver Both mains supply and battery supply operation LED Emergency lighting Fire-resistant, high temperature resistant, thermal-insulation, anti-climate aging probongs tubes lifetime. 140 minutes at 3W by battery supply in emergency; Lithium battery: longer lifetime, over 500 times charging- discharging 2 years warranty Life time: >30000 hours Index LED Tube 600mm LED Tube 1200mm Power 9w 18w LED Type 2835 SMD 2835 SMD Input Voltage 85-265vac 85-265vac Light decay

18W Emergency LED T8 Tube with Microwave Human Induction Sensor FEATURE Built-in Lithium battery and driver Both mains supply and battery supply operation LED Emergency lighting Fire-resistant, high temperature resistant, thermal-insulation, anti-climate aging probongs tubes lifetime. 140 minutes at 3W by battery supply in emergency; Lithium battery: longer lifetime, over 500 times charging- discharging 2 years warranty Life time: >30000 hours Description This easy fit T8 Emergency LED tube comes with built in battery and motion sensor It has been designed with a new heat sink in order to solve heat problems with high output products, and also has high efficiency LED light performance and advanced durability case protection. 1. Multi – functional LED tube: compared with traditions emergency lights, emergency + sensor LED tubes not only can be used as general lighting, but also are used as microwave sensor or PIR sensor and emergency lights. One tube with multi – functions.  2. Built – in Lithium battery and driver: easy installation and saving labour cost.  3. Lithium battery: longer life time, green and over 1, 000 times charging – discharging.  4. Fire – resisting sleeves:  high temperature resistant, thermal-insulation, inflaming retarding & anti climate aging much prolong tubes life time. Index LED Tube 600mm LED Tube 1200mm Power 9w 18w LED Type 2835 SMD 2835 SMD Input Voltage 85-265vac 85-265vac Light decay

2ft 4ft Emergency LED T8 Tube with Rechargeable Battery  ALLMAY Patent T8 emergency tube is designed to replacement to fluorescent equivalents. With high energy efficacy and excellent thermal management, LED Emergency Tube is a versatile solution for indoor projects of any nature. Allmay LED Emergency Tube employs built-in driver and emergency Lithium battery, working with the originale lighting control system, it is equipped with intelligent protection circuit for over charging and over discharging. it switches to emergency mode 1 second after AC is off. It is used in veneus that requests emergency lighting function, such as hospital, parking lot, corridor, metro station. shopping mall, restaurant etc... Feature Available in Daylight (6500K), Warm (2700K) Energy saving 85% than fluorescent tubes Maintenance saving 95% Replaces standard T8 fluorescent tube lamps Available in lengths from 2ft to 4ft Provised even light spread with no shadowing Single-ended connection Emergency, Microwave Sensor Options available T8 4ft LED Emergency Tube Technical Specifications Model AM-8D605YJ AM-8D905YJ AM-8D1205YJ Length 60cm (2 feet) 90cm (3 feet) 120cm (4 feet) Power (Routine)     9W 14W 18W Power (Emergency)     2-4W Emergency duration 2-3 Hour Weight 320g  350g 400g Diffuser     Frost Light decay

T8 Tube LED Emergency light With Rechargeable Battery Backup ALLMAY AM-T8EG Series LED Emergency light tube is a dual-purpose Lamp for normal lighting and emergency lighting. Rechargeable LED Emergency light runs on Battery Automatically when Power failure. They are suitable for places need emergency lighting. Feature  Battery is built inside. Usually it is used as normal tube. When the AC power is off, the lamp can automatically identify it, and lasts lighting for 2-3 hours with the support of the battery. You can still turn it on and off by the switch on your wall. Battery can be charged automatically when the AC power is on and it has been fully protected. The high performance batteries can be repeatedly chargead and discharged 1000 times, Applications Outdoor hallway Factory Basement Parking lot Warehouse T8 4ft LED Emergency Tube Technical Specifications LED Rechargeable emergency light is for replacement of fluorescent lamp in case of emergency lighting. Model AM-8D605YJ AM-8D905YJ AM-8D1205YJ Length 60cm (2 feet) 90cm (3 feet) 120cm (4 feet) Power (Routine)     9W 14W 18W Power (Emergency)     2-4W Emergency duration 2-3 Hour Weight 320g  350g 400g Diffuser     Frost Light decay

LED Parking Lot Light with Microwave Motion Sensor Features: Splash-Proof and Dust-Proof Cover (Diffuser) for indoor or Outdoor Use in Covered Areas Three Ceiling Mount Installation: Flush Mount, Hang Hook, Or Hanging with Cable. Housing: Aluminum housing Lens Assembly: Polycarbonate lens Built-in Smart Microwave Motion Sensor (Optional)  Instant start and flicker-free, Glare free Wider Beam angle. Energy Efficient Technical parameters - LED Linear Suspension with Microwave Motion Sensor Power consumption 18W (Full) 3W (Dim) Input voltage     85-265VAC, 50-60Hz Power factor     0.92 Lumen output     900lm bright mode230lm standby mode Color temperature     6500K Color rendering index (CRI) >70 Beam Angle 120 ° Composition-diffuser & casting Polycarbonate Operating temperature -20 to +50 ° C Service life 35000+hours Detection angle  180 °*360 ° Detection zone  up to 8 m Standby power consumption

4W LED Round Microwave Sensor Light is built in Microwave Radar Movement Sensor, it can be wall or ceiling mounted, and is highly energy efficient as the light will only activate if movement is detected and remain on for the time period set. Unlike a PIR sensor, a microwave sensor can detect through constructions, allowing it to be neatly concealed inside the fitting and making it ideal for use in outdoors and stairwells, its IP44 rating makes this light suitable for both indoor and outdoor use.  FEATURE Cool White (6500k) light colour Average life expectancy 30, 000 hours + 3 year guarantee Microwave movement sensor with up to 12 meters and 360° detection range Suitable for wall or ceiling mounting Time on adjustable between 8 seconds and 10 minutes Optional corridor function - can be set to keep the lamp on at 10% when not in use Auto Switch onoff when motion activated motionless Energy efficient, Eco friendly, Easy to install.Low power consumption.  Much more effective than previous PIR sensors Technical parameters - 4W LED Round Microwave Sensor Ceiling Light Power consumption 4W  Input voltage     85-265 VAC, 50-60 Hz Power factor     >0.6 Lumen output     260 lm  Color temperature     6500K Color rendering index (CRI) >70 Composition-diffuser & casting Steel + PMMA Operating temperature -20 to +50 ° C Service life 35000+hours Detection angle  120 ° Detection zone.

LED Flush Ceiling Light with Microwave Sensor integrated microwave presence detector which enables the light to switch on automatically when someone enters the room. it is highly energy efficient as the light will only activate with movement is deteted and remain on for the time period set. it can be wall or ceiling mounted, Unlike a PIR sensor, a microwave sensor can see through constructions, allowing it to be neatly concealed inside the fitting and making it ideal for use in outdoors and stairwells. FEATUREIdeal for kitchens, hallways and high traffic areas. Surface mounted LED ceiling light. Simple, round design Provides a uniform light-output using SMD LED technology. IP44 water-resistant rated. Steel base with toughened acrylic diffuser. Microwave sensor with adjustable settings. Average life expectancy 30, 000 hours + 2 year guarantee Microwave movement sensor with up to 12 meters and 360° detection range Energy efficient, Eco friendly, Easy to install.Low power consumption.  Much more effective than previous PIR sensors Technical parameters - 18W LED Ceiling Light With Microwave Sensor Power consumption 18W  Input voltage     85-265 VAC, 50-60 Hz Power factor     >0.6 Lumen output     900-1200 lm  Color temperature     2700K, 4000K, 6500K Color rendering index (CRI) >70 Composition-diffuser & casting Steel + PMMA Operating temperature -20 to +50 ° C Service life 35000+hours .

AC220V Microwave Motion Sensor Detector detects movement within its range of detection by emitting low power microwave signals and measuring the reflections as people moving through a room. When movement is detected, the load switches on, if no more movement is detected within a certain time, The sensor switch will switch the load off. The sensor can be wall or ceiling mounted and is designed for the automatic switching of lighting. FEATURE Stable and long working hours, to adapt to a wide range of tempeture and induction covering a large area Radar scan signal issued by the sensors can penetrate wooden doors, glass and a thin wall ( installation can be concealed for anti-theft searchlight) Can achieve accurate delay lights people, people from the lights out. Widely used in recessed light fixtures and staircarse, corridors, channel, patio. warehouse.bathroom, toilet, basement, parking lot etc. Specification 1.Model: AM-RS-04Y2.Working Voltage: 185V-265V AC 50Hz3.Microwave Frequency: 5.8GHz4.Load:35W (Incandescent Lamp, Fluorescent Lamp)5.Standby power:

7W Microwave Movement Sensor LED Recessed Downlight is a complete LED fitting suitable for home or business. Unlike old halogen downlights which were full of gaps and had a seperate transformer, this LED downlight is fully integrated. The LED light source, light fitting, and LED transformer are all combined into one sealed unit. Once installed, it is essentially maintenance free as there are no bulbs to replace. Feature Built-in Intelligent Microwave Motion Sensor Professional lighting design, excellent uniformity High efficiency SMD LED chips Wide beam angle (140˚) and higher brightness. Suits existing or new 120mm ceiling cut-out. IP44 weatherproof Low profile and frosted flush finish. Available in 2700K (warm white), 4000K (neutral white), or 6500K (cool white) 50, 000 hours long life Overload, short circuit, under voltage protection Intelligent driver, security and stability. Ideal energy efficient lighting replacement for halogens. Technical specification Model AM-4.0GY Luminous flux 430-440lm Luminous Efficacy >60lmw Colour Rendering index 80 Beam Angle 140° Light Decay 35, 000 hours Power consumption 7 watts Input voltage Frequency 180v-265vac 50-60HZ Reflector Diffuser Frosted diffuser Operating Environment -20°c~+50°c Dimensions Φ140*62mm Hole Cut Size Φ118~Φ126mm LED Source 18pcs SMD2835 Working mode     ONOFF Sensor Range 180*360degree Sensor Distance 6-8m adjustable Delay Time 18-25s

Solar powered radar induction led street light adopts microwave radar sensor technology, long distance radar sensor, triggered range from 16ft-32ft in 180degree. Built of high quality 6063 die-casting aluminum alloy construction for long lasting performance, anti-corrosion, anti uv cover material, using high brightness osram leds, low light decay. Our own developed solar street light controller: microwave sensor detector, overcharge, overdischarge, photocell sensor. Save your energy with smarter technology, when motion is detected it goes to full brightness, providing a nice bright security light. Perfect for road, entrance, patios, garden, pathways, courtyard, driveways, deck, yard, street. Feature integrated microwave motion sensor and daylight sensor. Recharged by sunlight and store power for overnight lighting. With ultra-bright osram 3030 leds, waterproof ip65, heatproof and durable, intelligent energy-saving protection function: over charging, over discharging, li-ion battery 12v20ah working mode: fulllow brightness in the first 5 hours, then onoff mode. 19.5% conversion rate by mono-si solar panel technical specification power source: solar solar panel power: 2w, 19.5% efficiency solar panel size: 51.5cm*45cm*2.5cm li-ion battery: 12v16ah cct: 6000k-6500k beam angle: 150 degree radar sensor specification--- motion angle and distance: 120 degree, 6-10meters, delay time: 18-25s charging time: 8 hours waterproof lever: ip65 lighting mode: full, dim, off weight: 8.2kgs.

Magnetic fishing camping rechargeable bivvy tent light is compact, lightweight design,   easy to use. Ultra bright white light, 4 light settings from ultra bright to dim, up to 72 hours of battery charge. 3.7v 2000mah battery.  charge it from the mains, car, laptop, or usb battery pack. Two colour settings-white, sos. Magnetic fittings can be attached anywhere in your bivvy or tent. Sealed push button control. Versatile micro usb charging port. Feature the light has 3 levels of brightness + 1 s0s flashlight  10%(dim),   50 %(normal), 100%(supernova) and sos red&blue flashing with a 0.4 seconds duty cycle. Which allows you to preserve battery power when needed. Perfect as a camping tent light, keyboard light, evening walks light - plenty of illumination for walking in the dark plus a quick change to flash provides ample warning for oncoming cars.   easy to carry and hang on anywhere. The light has a built-in long life rechargeable 2000mah li-ion battery, which can be charged over 500 times via a included mini-usb cable, just charges via the usb port on a computer, an ac adapter, a solar panel, or a powerbank battery. - tons of ways to charge this light, even when there is no electricity. Quickly full charged in 3 to 4 hours can last from 3 to 72 hours depending on which brightness level you have set. The leds have a lifespan of 36000 hours which is 24+ years when used for 4 hours a day every day. Technical specification model: allmay material: aluminum.

2700K LED Bulb with Microwave Motion Sensor is designed to control the lighting ONOFF automatically with built-in microwave motion detector, it is made of utility die-casting housing for good heat disspation. High transparence 85% with soft light, Eye protection. Built-in Light Sensor Control, Can detect ambient brightness, not work at daytime,   work only at night(brightness < 10lux). The sensor will operate through glass, plastic and wood and should be adjusted at installation to achieve the required sensitivity.  FEATURE Energy saving & High sensitivity Built-in Microwave Motion Sensor Greater than 60 watt halogen Polycarbonate for extra strength Available in BC & ES Caps 1 Year Warranty CE, ROHS Certified Stays on for 30 seconds after movement detected Technical Parameter MODEL AM-QP-07 Material    Aluminum heat sink, polycarbonate cover Sensor     Microwave motion sensor Power Consumption    7w (when on) Base Screw (E27) or Bayonet cap (B22) ColourTemperature Warmwhite (2700K) BeamAngle 120° LightOutput 400lumens Dimensions 70mm * 125mm Installation     Self installation Voltage     85-265VAC Sensor Range Approx 8m Time Delay     18-25seconds after movement detected LED brand SANAN LED Lifetime 50, 000hours

Commercial led solar-powered motion sensor street light with smart microwave motion sensor, 360, designed and built for a wide range of lighting applications such as commercial buildings, parking lots, street lights, farms, parks, exterior work lights and large area residential and recreational lighting. This quality built and very reliable solar powered led light is completely self-contained. It is made from a sturdy cast aluminum alloy light body fixture, ultra-bright led, can be used for new installations or replacement of outdated ac powered lights.it lights up to maximum brightness when microwave sensor is activated after midnight. Built-in intelligent power management to automatically compensate for different weather conditions of the world most sunlight coverage geography. Ture dusk to dawn feature, and able to light up to 3-4 in cloudy days illuminating time. Feature charge and discharge battery efficiently under automatic protection control automatic battery capacity and power source monitoring on-board microwave motion sensor provides dusk to dawn illumination all night long most reliable lithium-based battery outstanding illumination coverage. High quality made components with extend ultra long operating life span. Brightness is approximately 2400 lumens. Technical specification brand name allmay or customer's brand theory doppler microwave motion sensor solar panel 18v, 25w monocrystalline silicon led source cob 24w delay time 18-25s sensor range 6-10m 180*360

Up & Down LED Linear Suspension Commercial Light are a great way to make a room look wider or longer and since the shape of the fixture lies along a single plane with its generally rectangular shape, it's easy to keep a room from becoming over-stimulated with ceiling lights. This style of linear chandeliers are helping to make your space elegant and energy efficient. The Built-in Microwave Motion Sensor is one of the smartest LED products in themarket, offering a more lasting performance since it operates only when it`sneeded. Microwave detection is a newer and more advanced occupancy sensor than the PIR– it works by emitting high-frequency electro-magnetic waves and then receives their echo. Normally operates in standby mode, providing background light levels at 230lm. Sensor will detect the slightest movementwithin approx 10 meters. Features: Snap in frosted acrylic lens Built-in Microwave Motion Sensor Instant start and flicker-free, Glare free Energy Efficient Applications:  Ideal for areas where traffic is infrequent but background lighting is still important for safety and security. Car-parks, staircases, corridors & walkways. Warehouses and distribution centers. Basements, washrooms, entrances & exits. Technical parameters - LED Linear Suspension with Microwave Motion Sensor Power consumption 18w in bright mode 2-4w in standby mode Input voltage     85-265VAC, 50-60Hz Power factor     0.92 Lumen output

Motion Sensor Solar led street light All in one, Radar sensor led solar light, LED Outdoor Waterproof Garden Solar LED street light, Outdoor 750LM LED Solar Power Motion Sensor Garden Yard Wall Light Super Bright Garage Security Door Lamp IP65 Waterproof Working Instruction (From Dusk to Dawn) Keep Pressing the button 3 seconds directly go to ONOFF MODE. Press button again--go to FullDim brightness Mode(Defaulted). After 5 hours turn to the ONOFF mode. Feature 1. Adopt the motion sensor, when someone or car approached, the light will turn on instantly for 20 seconds,   when no motion or motion left, the lamp will turn to 13 brightness(1w) or turn off. energy-efficient power. 2. Use Solar power, LED Lighting, both of them perfect combination, save energy and protect earth's resources. 3. Use High-capacity Long-life Lithium Iron Phosphate battery, High temperature properties, long service life. ensure long lifetime. 4. Integrated design, no cable, wireless, Easy to install, offer a variety of installation methods, lamppost local, material, can iron posts, wood, bamboo, plastic, low cost. 5. Waterproof and Weatherproof. Tips 1. In winter, the solar light is not able to be fully charged for the lack of light, so its normal if the solar light is not bright enough and illumination time is short. Light time depends on how much it is charged during the daytime. 2. Be sure to charge the product in full sun for 8 hours before use, please mount in the direct sunshine

Waterproof wireless solar motion sensor street light is a popular choice for many looking for lighting only when needed. The lamp will switch on when motion is detected. That makes them ideal for use as a security light but also for convenience lighting. Install one for the back yard or patio area and perhaps one near your front door, porch or garage. The motion sensor is usually attached to the light fixture. We offer a selection of solar powered motion detector lights most of which use the latest led technology. They are all easy to install (diy) almost anywhere and come complete with a solar panel. Simple, secure online ordering with worldwide delivery. Working instruction (from dusk to dawn) keep pressing the button 3 seconds directly go to onoff mode. Press button again--go to fulldim brightness mode(defaulted). After 5 hours turn to the onoff mode. Feature 1. Adopt the motion sensor, when someone or car approached, the light will turn on instantly for 20-30 seconds,   when no motion or motion left, the lamp will turn to 13 brightness(1w) or turn off. Energy-efficient power. 2. Use solar power, led lighting, both of them perfect combination, save energy and protect earth's resources. 3. Use high-capacity long-life lithium iron phosphate battery, high temperature properties, long service life. Ensure long lifetime. 4. Integrated design, no cable, wireless, easy to install, offer a variety of installation methods, lamppost local, material, can iron posts

Microwave sensor pcb module retrofit led light is a new generation of cilingliamps transormation led light source, the new upgrade led light source module. Is more power saving, more durable, easy replacement, the light is bright, instant on, long-life led light source, high efficiency, no strobescopic, low power consumption. Feature built-in microwave motion sensor high iluminous, energy saving. Magnetic, easy to install, weatherproof lighting protection, super heat dissipation no flicker, no radiation longlife time: 50000hours technical specification brand: allmay size: diameter 120mm power: 12w color:  cool white (6500k) light source: 2835chips led qty: 24pcs input voltage: ac85-265vac application: replacement for fluorecent tube, retrofit for led ceiling lamp.

Time Delay Microwave Sensor For LED Floodlightr is an innovative type of energy-saving lighting switch, it is used to sense movement of people, animals, cars or other objects, they can be used in automatically cativated lighting systems. It is weatherproof, high sensitivity, active motion detector, automatic, convenient, safe and practical. it has the function of power and detection indication.  FEATURE 360degree rotation Easy to install The motion sensor can identify day and night automatically. Strong anti-interference and reliability, security and convenience. Features of intelligent detection and delay time. Time delay Lux Sensor Detection distance Adjustable. Built-in Photocell brightness sensor Wide application range: can be used in incandescent lamp(bulb), energy saving lamp, LED Lights, fluorescent lamp. Technical Specification Model: AM-TG-02 Color: Black Material: ABS Operating Voltage: 85V-265V AC  5060Hz Microwave Frequency: 5.8Ghz Working Rotation: 360° Reaction Time: 0.5sRated Load: 1-200W (100w110v)Transmission power:

Sensor led ceiling light replacement module is a replacement led light source for ceiling light with microwave sensor, our own designed integrated sensor & driver, using super bright 2835 led chips, long life and energy saving than traditional incandescent bulbs. Easy installation with strong magnetic holder. High transparent lens and large beam angle. Lower power consumption. High heat dissipation aluminum alloy pcb board. Feature built-in microwave motion sensor high iluminous, energy saving. Pmma lens, ilumination uniformity. Magnetic, easy to install, weatherproof lighting protection, super heat dissipation no flicker, no radiation longlife time: 50000hours technical specification brand: allmay material: pmma+aluminum alloy size: diameter 120mm power: 12w color: warm white 2700k, cool white (6500k) light source: 2835chips led qty: 24pcs input voltage: ac85-265vac installation: magnet absorption application: replacement for fluorecent tube, retrofit for led ceiling lamp. Installation

Mini Microwave Motion Sensor For Lighting Auto Control is an innovative and active motion detector with HF system 5.8GHz, It automatically switches onoff light based on motion and ambient light level. Can control all kinds of lamps, for example, halogen, fluorescent and LED lights, Compact size and small casing, suitable to fix within most luminaires. Motion can be detected through plastic, glass and thin non-metal materials. Compact size makes it suitable to fix within most luminaires. Automatic switching based on motion and ambient light level. Typical Applications for Luminaires with built in Mircrowave Detection Stairwells, Corridors, Carparks, Store Rooms, External Lighting, Office Areas, Toilets, Classrooms, Warehouse Areas. Feature 1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their echo.4. The sensors detect changes in the echo program.5. The sensors detect tiny movements in detecting range.6. Send the signal to the MCU and execution of instructions.7. The signals are likely to be detected through the door glass and thin-walled.8. It will get better result if the person or object when moving toward the sensor probe.9. This product is a strong anti-jamming, almost no wind, heat and other environmental factors foreign interference 10. High sensitivity & Cose effective, Energy efficient, Mecury-Free, No UV and IR radiation

200W HF Presence Microwave Sensor Detectors which detects movement, the technology is active and more sensitive than PIR and it allows for the range of detection to be accurately set, which makes it ideally suited where people sit still e.g an office or a classroom. The HF detector is also not sensitive to pollutants, unlike the PIR lens that can become less sensitive if the lens gets dirty in a dirty environment. The sensor supplies a simple energy-saving solution to use light only when and where you need it. it automatically switches onoff light based on motiona nd ambient light level. Can control all kinds of lamps, for example, halogen, fluorescent and LED lights. Compace size and small casing, suitable to fix within most luminaires, easy to install. Application areas: large areas, Car parks, Corridors, Offices. FEATURE Strong anti-interference and reliability, security and convenience. Features of intelligent detection and delay time. Built-in Photocell brightness sensor Wide application range: can be used in incandescent lamp(bulb), energy saving lamp, LED Lights, fluorescent lamp. Technical Specification Model: AM-RS-86Input Voltage: 185V-265V AC 50HzOutput Voltage: 185-265V AC Microwave Frequency: 5.8Ghz Material: Flame-retardant ABSRated Load: 5-200W (Incandescent Lamp, Fluorescent Lamp)Transmission power:

Radar Sensor Microwave Motion Sensing Switch, adopts microwave motion sensor theory, when the people are approaching within its detection range, the switch will conncet the circuit, and when the people are leaving out of the range, the switch will disconnect the circuit. the switch will not work in the daytime. used for controlling the light in basement, garage and other places. Feature 1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their echo.4. The sensors detect changes in the echo program.5. The sensors detect tiny movements in detecting range.6. Send the signal to the MCU and execution of instructions.7. The signals are likely to be detected through the door glass and thin-walled.8. It will get better result if the person or object when moving toward the sensor probe.9. This product is a strong anti-jamming, almost no wind, heat and other environmental factors foreign interference 10. High sensitivity & Cose effective, Energy efficient, Mecury-Free, No UV and IR radiation, No flicker Technical Specification 1. Model: AM-RS-04Y2. Input Voltage: 185V-265V AC 50Hz-60Hz3. Output Voltage: 185-265V AC 4. Microwave Frequency: 5.8GHz 5. Material: Flame-retardant ABS4. Rated Load: 5-35W (Incandescent Lamp, Energy saving, Fluorescent Lamp)5. Transmission power:

86 Type Recessed Microwave Presence Detector Flush is an unobtrusive unit that allows you to switch the lights on in corridors and rooms when someone enters. With a 360 degree detection angle and range of 4.5 meters, the Radar Sensor can control a 200W resistive load. Perfect for low use areas and ideal for energy saving applications.    the Microwave Motion Sensor technology is active and more sensitive than PIR and it allows for the range of detection to be accurately set, which makes it ideally suited where people sit still e.g an office or a classroom. The HF detector is also not sensitive to pollutants, unlike the PIR lens that can become less sensitive if the lens gets dirty in a dirty environment. The sensor supplies a simple energy-saving solution to use light only when and where you need it. it automatically switches onoff light based on motiona nd ambient light level. Can control all kinds of lamps, for example, halogen, fluorescent and LED lights. Compace size and small casing, suitable to fix within most luminaires, easy to install. Application areas: large areas, Car parks, Corridors, Offices. FEATURE Complete with built in Photocell & Microwave Motion Sensor 360˚ detection angle, 6m maximum range with a 18 ~ 30s timer function. Constructed from polycarbonate. Strong anti-interference and reliability, security and convenience. Features of intelligent detection and delay time. Technical Specification Model: AM-RS-86Input Voltage: 185V-265V AC 50

Led globe bulb with microwave motion sensor is a unique unit with an inbuilt motion sensor. This will detect any movement object up to 8 meters away enabling automatic operation. It has good thermal management with energy saving of 80% over equivalent incandescent bulb. Our led sensor bulb is perfect for hallways, entrances, lobbies, rest homes and garages where security and safety is required or inaccessible switches are present ,   the sensor bulb is available with an edison screw & bayonet cap base. Feature: energy saving & high sensitivity built-in microwave motion sensor greater than 60 watt halogen polycarbonate for extra strength available in bc & es caps 1 year warranty ce, rohs certified stays on for 30 seconds after movement detected technical parameter model am-qp-07 material    aluminum heat sink, polycarbonate cover sensor     microwave motion sensor power consumption    7w (when on) and 0.1w (sensor only) base  screw (e27) or bayonet cap (b22) colourtemperature warmwhite (2700k) beamangle 120° lightoutput 400lumens dimensions 70mm * 125mm installation     self installation voltage     85-265vac sensor range approx 8m time delay     18-25seconds after movement led brand sanan led lifetime 50, 000hours

Adjustable Microwave Motion Sensor Lighting Switch 200w is a motion switch, turn on the light on detection of moving objects (people movement), and turn off after a pre-selected holdtime when there is moving detected (no people around ), A daylight sensor is also built-in to switch off the light when there is sufficient ambient light. Application School, Universities, Colleges, Shops, Car park, Homes, Hospitals, Offices, Meeting Rooms,   Hotels, Corridors, Public washroom. Feature 1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their echo.4. The sensors detect changes in the echo program.5. The sensors detect tiny movements in detecting range.6. Send the signal to the MCU and execution of instructions.7. The signals are likely to be detected through the door glass and thin-walled.8. It will get better result if the person or object when moving toward the sensor probe.9. This product is a strong anti-jamming, almost no wind, heat and other environmental factors foreign interference 10. High sensitivity & Cose effective, Energy efficient, Mecury-Free, No UV and IR radiation, No flicker Functionality When movement is detected, the load switches ON automatically, if no more movement is detected within a certain time. then the 200W AM-RS-06 will switch the load OFF. Technical Specification Model: AM-RS-06Input Voltage: 185V-265V AC 50HzOutput Voltage

200W Doppler Radar Microwave Movement Sensors is an active motion detector emits high-frequency electro-magnetic energy (5.8GHz) and receives the echo from movements in the detection zone. An internal microprocessor then triggers and connects the load to the supply ( 'On' command). Microwave Detectors are ideal for switching lighting loads and can be used for switching lights on from off to full output when someone enters an area. While there is movement in the area, the sensor will hold the load on. The sensor can be adjusted so that when movement stops the load will switch off after 18 seconds to 1 mins. FEATURE Built-in Photocell-Daylight Sensor Energy efficient and cost effective Non-contact detection Readings not affected by temperature, humidity, noise, air, dust or light - suitable for hardsh environments. Strong resistance to radio frequency interference Low output, unharmful to human Wide detection range and high velocity. Supports non-living object detection Technical Specification 1.Model: AM-RS-032.Input Voltage: 85V-265V AC 50Hz3.Output Voltage: 85-265V AC 4.Microwave Frequency: 5.8GHz 5.Material: Flame-retardant ABS4.Load: 5-200W (Incandescent Lamp, Fluorescent Lamp)5.Standby power:

Microwave motion sensor auto switch body movement is a new energy-saving product, it adopts microwave sensor mold with high-frequency electro-magnetic wave (5.8ghz) and integrated circuit. It gathers automatism, convenience, safety, saving-energy and practical functions. Its installation is very convenient and its using is very wide.  feature smart sensors: when some one enter into the range of detection, microwave detector will light up, people leave, the lamp turn off; can automatically identify daylight and dark night. Intelligent delay load type: incandescent light bulb, energy saving lamp, led light source, etc. Specification 1.model: am-rs-042.working voltage: 185v-265v ac 50hz3.microwave frequency: 5.8ghz4.load: 35w (incandescent lamp, fluorescent lamp)5.standby power:

G24 E27 micorave moiton sensor led corn bulb retrofit lighting project led bulb Motion sensor Dimmable Led Corn LightLed Corn BulbLed Corn Light E27 G24   CE Rohs   Connector type: E27 G24 Input Voltage: AC90-265v Output power: 5W Lumens: 400LM Color Temperature: 2700-6500K (white warm white) Sensor distance : 6-8 meters Human Sensor Range: 180 degrees maximum   Sensor type A: when detect movement 100% lighting on, no movement stand by status 0%lighting   Sensor Type B: when detect movement 100% lighting on, no movement stand by status 30%lighting Working mode you can choose: A: onoff  B: 100%brightness 20%brightness                           100%brightness output 5W           20%brightness 1W (stand by status) Technical Parameter MODEL AM-HC-0501 Material    Aluminum heat sink, polycarbonate cover Sensor     Microwave sensor + Light sensor (optional) Power Consumption    5W Base  Screw (E27) or Bayonet cap (B22) ColourTemperature Warmwhite (4000K) BeamAngle 120° LightOutput 300lumens Dimensions 40mm * 115mm Installation     Self installation Voltage     85-265VAC Time Delay     15-25s (adjustable) LED brand SANAN LED Lifetime 50, 000hours CRI >70 Sensing Range 6-10 meters Working mode Light ONOFF; Full brightnessDim brightness.

Garage Sensor Lighting LED Linear Light with Dimming Sensor  microwave sensor led linear light Specifications:   Input Voltage: AC 85V-265V   Output power: 9W 14W 18W    Size:0.6m 0.9m 1.2m   Color Temperature: 2700-6500K   sensor distance: 6-8 meters delay time: 20 seconds accept customize   Human Sensor Range: 180 degrees maxim   Sensor type : dual-lighting                               when detect movement 100% lighting                                 no movement 20% lighting Features: Splash-Proof and Dust-Proof Cover (Diffuser) for indoor or Outdoor Use in Covered Areas Three Ceiling Mount Installation: Flush Mount, Hang Hook, Or Hanging with Cable. Housing: Aluminum housing Lens Assembly: Polycarbonate lens Built-in Smart Microwave Motion Sensor Instant start and flicker-free, Glare free Wider Beam angle. Energy Efficient Option Sensing Mode: Sensor Type A: ONOFF Mode (100%~0% brightness standby) The LED Light will turn on automatically When Motion Activated, and last for 18-25s, then turn to OFF with no motion. Sensor Type B: FullDim Mode (100%~20% brightness standby)  The LED Light will turn on automatically when motion activated, and last for 18-25s, then turn to 20% Brightness with no motion. 

IR Sensor 86 Hand wave switch mirror light sensors on off 200W sensor distance 15cm ONOFF SENSOR Input voltage AC85-265V Max Power control 200w sensor distance 15cm hand wave first time , switch on hand wave second time, switch off That's going on   - Instruction:when sensor distance 15cm Press any key on your TV air condition or other remote control             ONOFF light so cool and magic, right?

Garage sensor lighting led linear light with dimming sensor microwave sensor led linear light Specifications:   Input Voltage: AC 85V-265V   Output power: 9W 14W 18W   Size:0.6m 0.9m 1.2m   Color Temperature: 2700-6500K   Sensor distance: 8-10 meters Brightness sensor< 10lux Delay time: 20 seconds accept customize   Human Sensor Range: 180 degrees maxim   Sensor type A: ONOFF Sensor type B: dual-lighting                               when detect movement 100% lighting                                 no movement 20% lighting Features: Splash-Proof and Dust-Proof Cover (Diffuser) for indoor or Outdoor Use in Covered Areas Three Ceiling Mount Installation: Flush Mount, Hang Hook, Or Hanging with Cable. Housing: Aluminum housing Lens Assembly: Polycarbonate lens Built-in Smart Microwave Motion Sensor Instant start and flicker-free, Glare free Wider Beam angle. Energy Efficient Applications:  The LED Linear Light with Smart Sensor Control is the only light you need for hands-free lighting in any home, workspace, garage space, covered patio, office, and more. Technical parameters - LED Linear Suspension with Microwave Motion Sensor Power consumption 18W in bright mode 2-4W in standby mode Input voltage     85-265VAC, 50-60Hz Power factor 

E27 B22 4W7W LED Microwave Radar Motion Sensor Light Bulb  Feature Energy saving & High sensitivity Built-in Microwave Motion Sensor Greater than 60 watt halogen Polycarbonate for extra strength Available in BC & ES Caps 2 Years Warranty CE, ROHS Certified Stays on for 30 seconds after movement detected Technical Parameter MODEL AM-QP-07 Material    Aluminum heat sink, polycarbonate cover Sensor     Microwave Power Consumption    7W (when on) and 0.1W (sensor only) Base  Screw (E27) or Bayonet cap (B22) ColourTemperature Warmwhite (2700K), Cool White (6500K) BeamAngle 120° LightOutput 560lumens Dimensions 70mm * 125mm Installation     Self installation Voltage     85-265VAC Sensor Range Approx 8m Time Delay     18-25 seconds after movement LED brand SANAN LED Lifetime 50, 000hours

LED Motion Sensor Bulb with Dusk to Dawn, 4W(40W Equivalent), E27E26 Base. FEATURE: 1. Easy Installation and More Application:  Installation just like normal E27E26B22 Bulb, Ideal for corridors, halls, landings, stairwells, outdoor porch light fixture 2. Intelligent Radar Sensor:  Automatic on when someone moves in detection range, Black out in 30 seconds when there is no movement. 3. Only Turns on in Dark Built in Light sensor, Only turns on when the ambient light is dark, avoid unnecessary work in day. 4. Large Induction Range: Up to 24 ft induction distance with 180 detection angle, also detect through glass, wood and thin walls. 5. Unlimited warranty Allmay offer 2 years unlimited warranty, Just contact us for any question or replacement. Technical Parameter MODEL AM-QP-04 Material    Aluminum heat sink, polycarbonate cover Sensor     Microwave Power Consumption    4W (when on) and 0.1w (sensor only) Incandescent equivalent     40 watts Base  Screw (E27) or Bayonet cap (B22) ColourTemperature Warmwhite (2700K) or Cool white (6500K) BeamAngle 120° LightOutput 260lumens Dimensions 60mm * 125mm Installation     Self installation Voltage     85-265VAC Sensor Range Approx 8m Time Delay     30seconds after movement LED brand SANAN LED Lifetime 50, 000hours

Radar Sensor LED Light Lamp Auto Motion Sensor Detector Light Switch Allmay Microwave (Radar) Motion Sensor is an active motion detector, it can detect movement objects. including humen movement, car moving, animal etc. Widely used for Motion-activated LED Lighting, LED Strips, Alarm, Security System, Automatic sensory device and more. Features Delay time: setting 3s-180s adjustable Sensor distance: 0.3-22ft adjustable (1-10m) Light sensor: 10-100lux adjustable Automatic induction: When peoplecar enter into the range of induction, it will turn on the light with fulll brightness, after the delay time, it will turn off. During the delay time, if motion detected, the delay time will reset, and start a new delay time. Detection is possible through doors, woods, panes of glass or thin walls. Technical Specification Model: AM-RS-06 Input Voltage: 185V-265V AC 50Hz Output Voltage: 185-265V AC Sensing principle: 5.8Ghz microwave motion detector Material: Flame-retardant ABS Rated Load: 5-200W (Incandescent Lamp, Energy saving, Fluorescent Lamp) Transmission power:

Emergency 2.5 Hours T8 LED Rechargeable Tube Light with Sensor 1. When Connect the main power:  The tube works as a led tube with microwave sensor. it will detects movement and turn on automatically with motion activated. When no motion, it will turn to dim mode with 30% brightness.  Eliminates wasted power in low traffic areas when bright light is not required. Power consumption drops from 18W to 4.5W in standby mode. When needed, the light output is an extra bright 1500 lumen with superior light quality. In the absence of human traffic, tube automatically dims to 30% of its maximum output. 2. When the power failure:  The tube will light up with power failure and keep brightness for 140 minutes with built-in lithium battery. (3.7V, 2000mAh). Features: The ultimate in energy-efficient tube lightingFull brightness when movement detected dropping to 20% brightness in standby mode (no movement). In-built microwave motion sensor.Much more effective than previous PIR sensors. Easy to install, Allmay LED Tube fits into your existing fluorescent T8 light fixture.Poly-carbonate and aluminium construction.Low energy alternative to a standard fluorescent battenUltra-bright LEDS: low power consumption with enhanced life expectacySlim design: offers a more stylish and modern solution to traditional battens Technical parameters - LED Tube with Microwave Motion Sensor Power consumption 18w in bright mode 3w in standby mode Fluorescent T8 tube equivalent 36

Ce emc indoor led lamp microwave motion sensor bulb the smart sensor light is simple to use and provides the security results you want and need.   the energy saving light bulb is designed with a motion sensor built in the bulb, it has the ability to detect motion within a distance of 30 feet, which means you receive pease of mind with this light bulb.   the smart sensor light bulb is ideal for adding additional lighting to unfinished basements, patio steps, doorways,  and driveways.   with a quick twist in your standard socket, (e27, b22) , you will receive a wide-angle of 120 degrees of light detection to help you know if any movement is present in your yard or around your home or business.   pros this bulb is extremely affordable compared to other options lower power consumption results in an eco-friendly product the sensitivity range of this fixture is up to 30 feet it is able to sense any movement within all directions provides bright light for safety and secuirity benefits.   cons indoor use only not recommended for use outdoors where it is exposed to the elements not recommended to be used with a cover of metal material.  technical parameter model am-qp-04 material    thermal plastci housing, polycarbonate cover sensor     microwave radar motion sensor power consumption    4w (when on) and 0.1w (sensor only) incandescent equivalent     40 watts base  screw

Ultra Bright Radar Sensor and Emergency T8 LED Tube Light 3 Hours Multi function: Following Three types tube light are all available (1)sensor tube light (2)emergency rechargeable tube light (3)sensor+emergency Product Features: 1. High Lumen: 1800lm, up to 100 lmw 2. High efficient and durable SMD LED: SMD2835 3 Dimmable Microwave motion sensor led tube are available. 4. Non-isolated and Isolated led driver 4. Single-end power & double-end power 6. It has a supper long lifespan, and it lasts ten times longer than conventional lighting products. 7. It is environmentally friendly and recycle as it contains no mercury-lead and other toxins, no electromagnetic interference. 8. Health light, it emits no ultraviolet light or infrared light and generates no radiation. radar sensor T8 Tube + Dimming + LED Tube Emergency led indicator instruction: internal Ni-MH DC12V battery+sensor driver+sensor module   Double fire wire control   Microwave sensor + emergency intelligent led tube light   1) electric wire connect instruction:   L: connect to the fire wire (LIVE LINE) through light switch    N: to Zero curve   L1: The fire emergency control line (power grid line)

E27 B22 4W 7W Microwave Motion Sensor LED Bulb with Light Operated Automatic On Off Allmay LED light Get high quality light with minimal power consumptionThe motion sensing light bulb is ideal for installation in various places due to it its motion detection mechanism. The LED technology ensures it doesn't produce much heat thus extended its life span, brighter light,  and longer service life.In fact, it consumes just 20% of the regular incandescent bulb and lives ten times longer. You can use it at home, office and other places. The microwave motion sensing mechanism allows it to light on and off upon detecting human movement. FEATURE The bulb is extremely affordable compared to other options The sensitivity range of this fixture is up to 12 feet It is able to sense any movement within all directions Suitable for use in a number of locations around the home or office Longer lifespan than other bulbs High quality, bright LED light Dusk to dawn detection Ability to install in any interior space with ease Feature Energy saving & High sensitivity Built-in Microwave Motion Sensor Greater than 60 watt halogen Polycarbonate for extra strength Available in BC & ES Caps 2 Years Warranty CE, ROHS Certified Stays on for 30 seconds after movement detected Technical Parameter MODEL AM-QP-07 Material    Aluminum heat sink, polycarbonate cover Sensor     Microwave Power Consumption    7W (when on) and 0.1W

DC12V 24V Microwave Motion Sensor Switch for LED Strip Light This ONOFF sensor control is a motion detection switch, the fixture turns on when sensor control detects motion and turns off with no motion. it has daylight sensor built-in. which will detect the ambient brightness. it only work at night.  FEATURE Smart sensors: When some one enter into the range of detection, microwave detector will light up, people leave, the lamp turn off; Can automatically identify daylight and dark night. Intelligent delay Load type: Incandescent light bulb, energy saving lamp, LED light source, etc. Specification 1.Model: AM-RS-05DC2.Working Voltage: 12V24V3.Microwave Frequency: 5.8GHz4.Load: 35W (Incandescent Lamp, Fluorescent Lamp)5.Standby power:

5W LED Rechargeable Emergency Bulb Light can continue to work when sudden blackout or power outage, its built -in lithium battery will do charging when the power on in daily lighting mode. It work in AC mode in daily lighting, but once there is a sudden power break, it will automatically switch to battery supply in DC mode and continue lighting up the room. It works about 3-5 hours for normal lighting usage after power outage.  Application: widely used in underground packing garage, corridor, passage way, bathroom, washing room and so on. FEATURE: Energy saving & High sensitivity Enviroment friendly. No infrared radiation, no ultraviolet radiation Switch quickly, stable, no flash. Polycarbonate for extra strength Available in BC & ES Caps Technical Parameter MODEL AM-QP-05YJ Material    Aluminum heat sink, polycarbonate cover Type Emergency rechargeable bulb Power Consumption    5w (when on) and 1.5 w (Emergency) Base Screw (E27E26) or Bayonet cap (B22) ColourTemperature Natural white (4000K) CRI >70 BeamAngle 120° LightOutput 300lumens Dimensions 60mm * 116mm Installation     Self installation Voltage     85-265VAC LED brand SANAN LED LED QTY 18 pcs SMD2835 Battery type Rechargeable Lifetime 50, 000hours Lens     Frosted Function 1: Use as normal LED bulb for lighting Function 2: Use as emergency LED bulb, Steps as below: Step 1: When the main switch and switch A is on

Power Outage LED Bulb with Rechargeable Battery is designed to be both energy efficient light bulbs and enhance safty lights. our emergency bulb is a revolutionary LED energy saving light bulb and works even during power outages. It includes a rechargeable battery which provides minumum 3.5 hours of light when the power goes out. It does not require any rewiring and can be used with standard E26E27B22 light bulb fixutres. easy to use : simply replace the 40 watt bulbs in your home with rechargeable energy saving light bulbs. FEATURE Turns ONOff from the wall switch during power outages. Provides minumum 3.5 hours of light during a Power outage Includes a built in Rechargeable battery Charges during normal use Charge only mode to charge the battery without glowing the bulb Easy to install and use Energy Efficient , CE, ROHS Compliant Works Even During Power Outages Never Be In the Dark Again! Technical Parameter MODEL AM-QP-07YJ Material    Aluminum heat sink, polycarbonate cover Type Emergency rechargeable bulb Power Consumption    7w (when on) and 1.5-3w (Emergency) Base Screw (E27E26) or Bayonet cap (B22) ColourTemperature Cool white (6500K) CRI >70 BeamAngle 120° LightOutput 350lumens Dimensions 70mm * 125mm Installation     Self installation Voltage     85-265VAC LED brand SANAN LED LED QTY 36 pcs SMD2835 Battery type Rechargeable Lifetime 50, 000hours Lens  

Intelligent 12w LED Oyster Lighting with Backup available in 12w, 15w, 18w models, with backup battery for emergency lighting. Make the smarter choice in energy efficient lighting. for use in emergency lighting applications. In the event of AC power loss, the light switches to the backup battery operating at power (3w), for up to 3 hours of continous illumination. it can be used in many areas with intermittent people traffice such as in apartment, complexes, stairwells, walkways, university compuses and more. its IP44 rating makes this light suitable for both indoor and outdoor use.  FEATURE 12W equivalent to 24W fluorescentAvailable in 2700k, 4000K, 6500K. Average life expectancy 30, 000 hours + 2 year guaranteeSuitable for wall or ceiling mounting Energy efficient, Eco friendly, Easy to install.Low power consumption.  Technical parameters-Smart LED Oyster Lights Power consumption 12 w  Fluorescent equivalent 24 w Input voltage     85-265 VAC, 50-60 Hz Power factor     >0.6 Lumen output     840 lm  Color temperature     4000K2700k6500k Color rendering index (CRI) >70 Composition-diffuser & casting Steel + PMMA Operating temperature -20 to +50 ° C Service life 35000+hours Beam angle  120 ° Standby power consumption

Ir sensor switch touchless onoff- mirror, cupboard or wardrobe,   move your hand near the switch and the light turns on, the perfect choice when your hands are wet or full of cookies dough and you need more light. With this touchless switch you can turn light (or electric circuit ) on and off simply by moving your hand. Move your hand near the detector ( at distance of 10-15cm) to switch on the light. To turn off  the light bring hand close to the switch again. So the sensor works like a universal switch. Feature: electrical motion sensor with mini sensor for intallation inside or outside furniture. Perfect to use in wardrobes, cabinets, closets, cupboards in the kitchen, bedroom, bathroom or living room. Technical specification built-in ir sensor effective range:

7Watt LED Downlight with 360ºdegree Radar Sensor is designed for ceilings, elegant and simple in its design just flushes in. The LED itself is SMD technology which is very reliable and powerful giving a life expectancy of 30, 000 hours. Colour temperature is cool white 6500K which gives 450lumens. Save electricity bill. Compact Dimensions, No big fixture house required. Inner diameter is 120mm. Outer diameter s 140mm. Height is 62mm. Easy installation. Can be easily fitted recessed light fixture. No additional accessories are required. Lower maintenance Costs. Extremely long life. Save your effort to replace bulbs in high ceilnig.Feature Built-in Intelligent Microwave Motion Sensor High sensitivity, Wide universal input voltage Professional lighting design, excellent uniformity High efficiency SMD LED chips Wide beam angle (140˚) and higher brightness. Suits existing or new 120mm ceiling cut-out. IP44 weatherproof Low profile and frosted flush finish. Available in 2700K (warm white), 4000K (neutral white), or 6500K (cool white) 50, 000 hours long life Overload, short circuit, under voltage protection Intelligent driver, security and stability. Ideal energy efficient lighting replacement for halogens. Technical specification Model AM-4.0GY Luminous flux 430-440lm Luminous Efficacy >60lmw Colour Rendering index 80 Beam Angle 140° Light Decay 35, 000 hours Power consumption 7 watts Input voltage Frequency 180v-265vac 50-60HZ

0.9M 14W T8 LED Sensor Tube Light is designed to reduce your fluorescent tube lighting costs by a minumum of 50%, our Allmay tubes are more than energy efficient options to conventional fluorescents. They deliver better quality & Longer lasting light with no UV, they do not require a magnetic or electronic ballast, they turn onoff instantly with no warm up period, they do not fade or flicker.  The Microwave T8 LED Tube is one of the smartest LED products in themarket, offering a more lasting performance since it operates only when it`sneeded. Microwave detection is a newer and more advanced occupancy sensor than the PIR– it works by emitting high-frequency electro-magnetic waves and then receives their echo. Normally operates in standby mode, providing background light levels at 230lm. Sensor will detect the slightest movementwithin approx 10 meters. Features: The ultimate in energy-efficient tube lighting High luminous efficacy for optimal return on investment Retrofit or replace: ideal for carparks, offices and more. Full brightness when movement detected dropping to 20% brightness in standby mode (no movement). In-built microwave motion sensor.Much more effective than previous PIR sensors. Easy to install, Allmay LED Tube fits into your existing fluorescent T8 light fixture.Poly-carbonate and aluminium construction.Low energy alternative to a standard fluorescent battenUltra-bright LEDS.

1200mm Integrated T8 LED Sensor Tube Lights perform efficiently in conditions where low voltage, halagen, or fluorescent luminaires have traditonally been used. Our T8 Integrated LED lamps incorporate integral drivers, are self-supporting, and can be surface mounted. ALLMAY T8 LED Integrated Lamps connect directly to line voltage and can be used in any interior space. Microwave detection is a newer and more advanced occupancy sensor than the PIR– it works by emitting high-frequency electro-magnetic waves and then receives their echo. Normally operates in standby mode, providing background light levels at 230lm. Sensor will detect the slightest movementwithin approx 10 meters. Features: No fixture needed, Integrated Universal Driver Units can be plugged together Frosted diffuser for soft light that eliminates LED glare Low maintenance cose Wide 120°beam angle; up to 30000 hours rated LED lifespan In-built microwave motion sensor.Much more effective than previous PIR sensors.Poly-carbonate and aluminium construction.Ultra-bright LEDS: low power consumption with enhanced life expectacySlim design: offers a more stylish and modern solution to traditional battensApplications:  Ideal for areas where traffic is infrequent but background lighting is still important for safety and security.Car-parks, staircases, corridors & walkways. Warehouses and distribution centers. Basements, washrooms, entrances & exits. Technical parameters - LED Tube with Microwave