Zhongshan Conor Electronic Technology Co. Ltd

Guangdong, China

• MOQ 50 Piece(s)

Features 1. KY667 is one-component semi-fluid RTV silicone sealant. It is an excellent adhesion of anti-aging, moisture-proof, Shockproof, strong viscosity, quickly dry and good electric insulation. This sealant is easy for operation and no pollution to the environment. 2. Neutral Curing and no corrosion to most of the metals 3. It is widely used in bonding plastic, ceramic plates, stainless steal, galvanization steel, oxygen- treatment metal, ABS, PVC, painting steel, aluminum product, glass, ceramic and wooden parts. 4. Strong viscosity, excellent tensile and pressure properties and not easy to brittle. 5. According with RoHS standard. Usage It is widely used in bonding and sealing the components of electronic device, lamp, automobile and home appliance. For the excellent strong viscosity it is also a good sealant to under water apparatus home appliance (such as to bonding panel and doorframe of microwave oven or to use to bonding the coil with baseboard of induction cooker, electric cooker, coffee maker, soybean milk machine, refrigerator, smoke machine disinfection cabinet, fan, remote, television, air condition), electronic toys, aircraft, automobile, communication equipment, windscreen of ship. Specification 1.Appearance:White, Black, Transparent, Grey (Semi-fluid) 2.Surface Drying Time:2~15 Minutes (25 ℃, RH50%) 3.Relative Density :1.25（g/cm3，25℃） 4.Viscosity:80000～110000Pa.s 5.Temperature Resistance:－60～200℃ 6.Tensile Strength:≥1.5Mpa 7.Elongation at break ( %):≥400% 8.Shear Strength:≥1.8 （25℃/Fe-Fe/Mpa） 9.Peeling Strength :≥2.0KN/M 10.Hardness(Shors/A):≥30～40 11.Surface Specific Resistance:≥1×1012Ω 12.Volume Resistant:≥5×1014Ω.cm 13.Dielectric Constant:（106HZ）≤3.0 14.Dissipation Factor:（106HZ）≤3×10-3 15.Piercing Strength:≥18KV/mm *All above mechanical properties and electrical properties data was tested after curing 7 days in 25℃ and 55％ relative humidity condition. How to use 1. Clean: Cleaning out the dust, rust and greasy of the part surface. 2. Gluing: Take off the cap from the unit, put on the plastic month on it and cut the plastic month with a suitable size then press the glue onto the parts with hand or gluing tools. The cap must be put on and well sealed after using 3.Curing: Put the parts which finished gluing in a flat place, the glue would be cured from surface to interior, in 24 hours(room temperature and 55% relative humidity degree) the curing depth could be 2~4mm.But if the glue of the part are too thick to contact with air, the curing time will be longer. In low temperature and relative humidity the curing time will also be longer. Notes Put on the cap accordingly after using and storing in seal. If there is some crust in the mouth you should only clean it out then it could be used freely. Storage 1. Store in 25℃ and shelf life is 6 months. After testing the adhesive could be cured in regulate time, it could also be used after 6 months 2 .Non-dangerous cargo. It could be shipped as a general chemical product.

• MOQ 300 Kilogram
• Viscosity(180 degrees centigrade CPS)5500+-500
• Length30CM
• Diameter11.3+-0.3mm
• Soften Point(degrees centigrade)70+-5
• Packing25KG/CTN
• Solidify Time(Second)10~15
• Application Temperature160~180
• CompositionEVA
• StoragePut in a dry place and the temperature should be on 20+-5 degrees centigrade
• Hardness75

• MOQ 300 Kilogram

Application: It is used for the bonding of electronic components such as basilar panel, capacitances , coil and coper, steal and aluminum .And it could be used in furniture or wooden parts connecting. Specification: 1.Appearance:Light Yellow Stick/Light Yellow Granlue 2.Diameter(mm):11.3±0.5 3.Viscosity(160� cps):8000±500 Brookfield RVT 4.Viscosity(170� cps):6500±500 Brookfield RVT 5.Viscosity(180� cps):5500±500 Brookfield RVT 6.Soften Point(�) :70±5 Ring and Ball method 7.Tensile Strength(kgf/c�) :25 ASTM D412 8.Hardness:75(Shors A/22�) 9.Application Temp(�):160-180 10.Composition:Thermoplastic Resin 11.Application Device:Hot melt glue gun Certification: SGS&RoHS Packing: 25KG/CTN Storage: Put in a dry place and the Temp should be on 20±5�

• MOQ 300 Kilogram

Application: 1107 hot melt glue stick is thermoplastic resin which could be used for the bonding of electronic components such as basilar panel, capacitances, coil and copper, steal and aluminum .It could also be used for bonding ABS, PVC, PET and the similar plastic material. Feature: 1.According with UL94-V0 and REACH standard. 2.Smokeless and Non-pungent odor.Fast curing and easy to operate Specification: 1.Appearance:White Stick or Granule 2.Diameter（mm):11.2+0.5/5 3.Soften Point(℃):140±10 4.Tensile strength(Mpa):60 (ASTM D412-98A) 5.Hardness:80 Shore(A/ 30℃) 6.Drying time(second):8-10 (JISK-6730) 7.Viscosity(160℃ CPS):16000±1500 (Brookfied LVF) 8.Viscosity(170℃ CPS):12000±1500 (Brookfied LVF) 9.Viscosity(180 ℃ CPS):9000±1500 (Brookfied LVF) Packing: 25KG/CTN

• MOQ 300 Kilogram

1.Appearance:Stick or Granular 　 2.Color:Amber Clear 　 3.Viscosity (200℃ CPS):300 ~ 850 4.Soften Point (℃):150 ± 5 (ASTM E28-67) 5.Specific Gravity(g/cm3):0.98(ASTM1475) 6.Tensile Strength:49kgf / cm2 7.Hardness:95 Shores(A) 8.Temperature Resistance Point(℃):130 ± 5 9.Shear Strength:5.5 ~ 7.5 (Polypropylene Sheet ±30℃) 10.Surface Resistance ( ohm ):1.3 × 10 13 11.Volume Resistance ( ohm ):0.9 × 10 10 12.Dielectric constant:60HZ 15, 103HZ 8.0, 106HZ 3.2 13.Puncture Voltage ( kV/mm ):18 14.Operating Temperature(℃):180 ~ 220(JISK-6730) 15.Application:"　　Polyamide For Hot-Melt According with UL94V-0 standard 　 According with RoHS standard 　 Used in bonding and fixing electronic components and plastic material"

• MOQ 50 Piece(s)

Product Featrues 1.It is an excellent adhesive for bonding ABS, PVC, HIPS, glass ceramic and metal. 2.Single component, easy operation and no corrosion to the material 3.It is chief climate ageing, good UV resistance, ozone resistance, good water resistance, cold resistance, oil resistance, medical resistance, impact resistance, damp resistance and insulation properties 4.High and low temperature resistance.Product feature will not change from -50℃ to 200℃ Usage It is widely used in bonding and sealing the components of electronic device, lamp, automobile and home appliance. It has excellent adhesion to windows, doors, washbowl, glass and ceramic.And it is also a good sealant to under water apparatus, home appliance(such as to bonding panel and doorframe of microwave oven or to use to bonding the coil with baseboard of induction cooker.Electric cooker, coffee maker, soybean milk machine, refrigerator, smoke machine, disinfection cabinet, fan, remote, television, air condition), electronic toys, aircraft, automobile, communication equipment, windscreen of ship. Specification 1.Surface drying Time( minutes):10 2.Hardness( A):31 3.Tensile Strength (Mpa):2.2 4.Elongation at break( %):400 5.Volume Resistivity (Ω.cm):7.4×1014 6.Puncture Voltage( KV/mm):25.8 7.Preservation:Put in a dry and cold place and temperature should be on-20℃~+27℃.Shelf life is 6 months Packing 1.100g/pc（Aluminium Tube） 100 PCS/CTN 2.300ml/pc（PE Cartridge Packing） 25 PCS/CTN 3.2600ml/pc（PE Cartridge Packing） 4 PCS/CTN Our service 1.Provide completely data sheet 2.We could test the formula as customer required to satisfy your special feature required. 3.We could provide adhesion test as customer required and make sure the product your purchased are suit for your need. 4.We are welcome you and your engineer to communicate and discuss the solvent with us. Notes No toxic after completely cured, but before curing please put it away from child and avoid eyes contact and keep the workplace ventilation. Remarks The above information is a creditable material but there is still some condition which we could not foresee and it is hardly for us to assure the accurate and suitability of some usage.So we suggest before using please read the product instruction carefully and to decide which is the best way to use.

• MOQ 100 Piece(s)

We are offering hot melt glue gun. Product name:hot melt glue gun model no.:nl-306 brand:conor application:suitable for 10.8-11.8mm glue stick operating voltage:ac 110~230v operating temperature:180~240 degree centigrades rated power:150w nozzle diameter :2.0~2.3 mm glue extrusion volume per minute:9�16g.