Conlab

Azor, Israel

Now buy 16, DC Inputs, Galvanic Isolation, 2 Fiber Optic Outputs, High Accuracy and Micro-Processor Based Fiber Optic Multiplexers (DFM-16) from us at market leading prices. Our company is one of the leading Manufacturers & Suppliers of a wide range of Fiber Optic Multiplexers (DFM-16). We make them by employing the latest technologies. Buyers can purchase Fiber Optic Multiplexers (DFM-16) from us in bulk and expect on time delivery of consignments.

Details :

• Inputs : 16, Dc Voltages

• Span Range : 1 to 28vdc (factory Set)

• Isolation : 1000vdc or Peak Ac

• Outputs : 2 Fiber Optic (main and Backup)

• Fiber-optic Connectors : St-3 Type

• Wave Length : 820 - 860 Nm

• Conversion Resolution : 12 Bits

• Accuracy : Better Than 0.2% of Span

• Scan Rate : 15 Msec/16 Channels

• Data Transfer Rate : 345.6 Kbaud

• Power Supply : 24 Vdc 10%

• Supply Consumption : < 200ma

• Indicators : Yellow Led, Power "on" Indicator

• Operating Temperature : 0 - 75c

• Storage Temperature : -25 to +85c

• Temperature Stability : 0.01% of Span/1k

• Humidity : 5 - 95% Relative, Non Condensed

• Fuse : 630 Ma, 5x20 Mm Fast Blown

• Housing : Plastic Polycarbonate

• Box : According to Ip50 Din 40050

• Terminals : According to Ip20 Din 40050

• Weight : 0.9 Kg

We are an established Manufacturer and Supplier of Fiber Optic Multiplexer (FOM-4) from Israel. Fiber Optic Multiplexers we make available is a DIN rail instrument provided with front accessible fiber optic ST connectors. We hold the expertise of delivering bulk orders of the Multiplexers within the promised timeframe.

Specifications :

• Inputs : 4 Fiber optic
• Connectors : ST-3 Type
• Wave Length : 820 - 860 nm
• Data Transfer Rate : 345.6 KBAUD
• Output : RS-232c communication port
• Output Protocol : Modbus*
• Baud Rates : 2400 - 19200 (factory set)
• Indicators : 1 Yellow LED, power "On" indicator*for data transmitting only
• Supply Voltage : 24 10% Vdc (regulated) Reverse polarity protected
• Storage Temperature : -25 to +85C
• Humidity : 5 - 95% relative, non condensed
• Fuse : 500 mA, 5x20 mm fast-blown
• Housing : Plastic Polycarbonate
• Box : According to IP50 DIN 40050
• Terminals : According to IP20 DIN 40050
• Weight : 0.85 Kg

features like 16, pt-100 3-wire inputs, 2 fiber optic outputs and micro-processor based are what distinguish our fiber optic multiplexers (rfm-16) from others in the market. our company is counted among renowned manufacturers & suppliers of fiber optic multiplexers (rfm-16). available with us in varied specifications, our entire range of fiber optic multiplexers (rfm-16) is reliable and highly accurate. buyers can purchase them from us at competitive prices and expect on time delivery.

details :

• inputs : 16, pt-100 3-wire sensors according to bs 1904 and din43760 characteristics. = 0.00385

• lead compensation error : < 0.2c/20 lead resistance

• sensor exitation : < 1 ma

• isolation : 1kv

• calibration : internal zero & span trimmers

• outputs : 2 fiber optic

• fiber-optic connectors : st-3 type

• wave length : 820 - 860 nm

• conversion resolution : 12 bits

• accuracy : better than 0.25% of span

• scan rate : 15 msec/16 channels

• data transfer rate : 345.6 kbaud

• power supply : 24 vdc 10%

• supply consumption : 200ma

• indicators : yellow led, power "on" indicator

• operating temperature : 0 - 75c

• storage temperature : -25 to +85c

• temperature stability : 0.01% of span/1k

• humidity : 5 - 95% relative, non condensed

• fuse : 630 ma, 5x20 mm fast blown

• housing : plastic polycarbonate

• box : according to ip50 din 40050

• terminals : according to ip20 din 40050

• weight : 0.9 kg

The Isolated AC Transmitter (ACT- S I / ACT-SV) that we make available stands out of the rest on counts of quality, reliability and performance. It is designed by our team of professionals having years of experience and in-depth knowledge. Buyers can purchase it from us at nominal prices. Rely on us!

Specifications : ACT- S V : INPUT SPAN (factory set) -

• 90-150, 180-300 Vac RMS
• Option : 300-440 Vac
• Over Range : +20% of span (for full accuracy)
• Over Load : +40% of span (continues)
• Input Power Consumption : 0.9 VA @ 300 Vac input
• Isolation : 4 KV RMS/1 minute
• Frequency Variation Effect : < 0.02%/Hz
• Weight : 0.3 Kg

ACT- S I : Input Span (factory set) -

• 0 - 5 Aac RMS
• Over Range : 6 Aac (for full accuracy)
• Over Load : 10 Aac Continues)
• Peak Overload : 40 Aac for 5 seconds every 10 minutes
• Input Power Consumption : 0.6 VA @ 5A input
• Isolation : 4 KV RMS/1 minute
• Weight : 0.25 Kg

Output :

• Current : 0-20 mA (all the partial ranges available)
• Voltage : 0-10 V (all the partial ranges available)
• Output Impedance : 800W maximum @ 20mA (according to Rmax= 16/Io(max)
• Output Ripple : < 0.1% of span
• Response Time : < 240 msec (10 - 90%)
• Frequency : 40 - 440 Hz
• Frequency Variation Effect : < 0.02%/Hz
• Supply : Self powered Accuracy (for 5-120% of range) -< 0.1% of span typicalLinearity (for 5-120% of Span) : < 0.1% typical
• Temperature Stability : better than 0.01%/^oC

Operation Temperature :

• Standard : -20 to 70^oC
• Option : -30 to 80^oC
• Storage : -40 to +90^oC
• Humidity : 5 - 95% relative, non condensed
• Housing : Plastic Polycarbonate

Protection Level :

• Box : According to IP-50 DIN 40050
• Terminals : According to IP-10 DIN 40050
• Mounting : Standard 35mm DIN rail

High accuracy and low cost, our Isolated AC Transmitter (ACT-4I3P / ACT-4V3P) is the primary choice and is widely preferred by all the buyers. We are a credible Manufacturer and Supplier of Isolated AC Transmitter (ACT-4I3P / ACT-4V3P) from Israel. In order to meet urgent and bulk demands of the buyers, we maintain a huge stock in our spacious warehouse.

Details :

ACT-4V3P-

• Input : AC Voltage
• Input Span (factory set) : 0 - 600 Vac RMS
• Input Burden : 0.25 VA at 230 Vac input 0.15 VA at 120 Vac

• Isolation :
  
  • Signal and Power Inputs : 4KV RMS/1 minute
  • Weight : 0.9 Kg

ACT-4I3P -

• Input : AC current
• Input Span : 0 - 1 to 0 - 10 Aac (RMS)
• Input Burden : 0.26 VA at 5 Aac input
• Inrush Current : 40 Aac (RMS) maximum for 8 seconds 75 Aac (RMS) maximum for 1 second every 10 minutes.

• Isolation :
  
  • Current Input : 2.5KV RMS/1 minute
  • Power Input : 4KV RMS/1 minute
  • Weight : 0.9 Kg

OUTPUT : Dc Current

• Current Range : 0-20 mA / 4-20 mA 28 mA (limited)
• Supply Voltage : DC or AC versions
• Dc Supply : 22-66 Vdc
• Dc Current Draw : 26 mA at 20 mA output
• Ac Supply (factory set) : 115/230 15% Vac
• Power Consumption : 1.9 VA
• Supply and Load Variation Effect : < 0.03% of span for full range
• Load Resistance : 600 for nominal AC supply 550 for minimum AC supply R=(Vsup-14)/0.02 limited to 600
• Response Time : 220 msec (0-98%)
• Output Ripple : Better than 0.1% of span (RMS)
• Accuracy (2-100% of input span) :

longer functional life and sturdy construction are some of the attributes that make our isolated dc transmitter (dct-4) highly popular. we are enlisted among the top manufacturers and suppliers of isolated dc transmitter. it is manufactured and tested using highly advanced techniques so as to ensure quality and proper functioning. transmitter can be obtained from us at a very reasonable price.

output loads -

• voltage mode : for 0-5/1-5v > 5000-10/2-10v > 1000

• current mode :
  
  • for mains supply (-10%)

the company is engaged in manufacturing and supplying top of the line quality isolated ac transmitter (act- 2 i / ac t 2 v) all over the nation. it is designed and fabricated in adherence with the laid international quality standards. whether it is a small order or bulk one, we have always executed timely deliveries.

details :

act- 2 i :

• input : ac current
• input span : 1 to 10 aac (rms)
• input burden : 0.26 va at 5 aac input
• frequency : 40 - 500 hz
• inrush current :
  
  • 40 aac (rms) maximum for 8 sec. every 10 minutes
  • 75 aac (rms) maximum, for 1 sec. every 10 minutes.

• isolation : 2.5kv rms/1 minute
• weight : 0.15 kg

act- 2 v :

• input : voltage input.
• input span (factory set) : 80 to 420 vac (rms)
• input burden :
  
  • 1.4 va at 230 vac input
  • 0.3 va at 120 vac

• frequency : 40-500 hz
• isolation : 2.5kv rms/1 minute
• weight : 0.2 kg

output :

• current range : 4 - 20 ma
• test terminals : 40 - 200 mv represents 4 - 20 ma
• supply voltage : 10 - 32 vdc, reverse polarity protected
• supply and load variation effect :

We are a top-notch Manufacturer and Supplier of Watt Transducers (WT-1) from Israel. We are backed by a team of skilled and experienced personnel who make use of sophisticated machines and latest techniques for their production. We make sure that the placed order, be it small or bulk, is timely delivered without any delays.

Performance oriented, longer service life, corrosion resistant and reasonably priced are the attributes of our Transducer that make it in wide demand. We are a respectable name as Manufacturer and Supplier of Watt Hour Transducer (WWH-3) from Israel. Whether it is a retails order or bulk one, we have always executed punctual and safe deliveries.

Details :

• Accuracy Of 0.1%
• Three-Phase Three-Wire
• Dry Contact or Opto-Isolator Output
• Complete Isolation
• 3-Year Warranty
• V V H - 3

Leveraging on our rich industry experience and strong tie-ups, we are capable in making available top-notch quality Isolated DC Transmitter (DCI-2). Our transmitter comes with high temperature stability and high accuracy. Feel free to place bulk orders with us and we will make sure that the placed order is timely delivered. Count on us!

Specifications :

• Input : DC voltage or current
• Input Ranges (for full span) :
  
  • Low voltage range : 4mV to 100mV
  • High voltage range : 100mV to 100V
  • Current range : 4A to 100mA

• Input Impedance :
  
  • Low voltage range : >100 M
  • High voltage range : >2 M
  • Current input : 5
  • Protected current input (option) : 70
  • Output : 4 - 20 mA, 25 mA (limited)

• Loop Resistance : Rmax()=(Vsupply-10)/.02
• Supply Voltage : 10.40 Vdc
• Supply and Load Variation Effect : Less than 0.03% of span
• Isolation : 1500 V dc or peak ac
• Response Time : 160 msec (0-98%)
• Accuracy
  
  • Including linearity,
  • Hysteresis and repeatability : < 0.08% of span

• Input Zero Change : 15% of span
• Zero Calibration : Three DIP switches and "Zero" potentiometer
• Input Span Change : 15% of span
• Span Calibration : Three DIP switches and "Span" potentiometer
• Cmr : 127db typical dc to 60 Hz
• Temperature Stability : < 0.008 %/1C of span
• Operation Temperature : -20 to +70C
• Option : -30 to+80C
• Storage Temperature : -30 to +85C
• Humidity : 5 to 95% relative, non-condensing
• Housing : Plastic polycarbonate
• Box : According to IP-40
• Terminals : According to IP-20
• Mounting : Standard 35 mm DIN rail

We are a reckoned among the proficient Manufacturers and Suppliers of Fiber Optic Multiplexer (FOM-10) from Israel. The Fiber Optic Multiplexers we make available receives up to ten fiber-optic data channels at baud rate as high as 345 Kbaud. Our experts carry out strict quality-tests on the Fiber Optic Multiplexers before the final dispatch.

16, 4-20 ma inputs, 2 fiber optic outputs, high accuracy and based on micro-processor are the highlights of our analog multiplexer (afm-16), which is why it is extensively in demand. we make sure that the analog multiplexer is designed and produced in sync with the stated quality norms. we are a top-notch manufacturer and supplier of analog multiplexer (afm-16). buyers can get it from us at the most reasonable prices!

details :

• the afm-16 analog multiplexer receives 16 process current inputs and output them sequentially via two parallel fiber-optic outputs. the afm-16 instrument is an all sold-state unit offering outstanding reliability. the multiplexer is controlled by a micro-processor which handles the scan-rate, the data conversion, the output transmission and the power supply/battery back-up.
• the selected input digitally converted at 12 bit resolution and transmitted by two fiber optic led
• transmitters connected in parallel in a transfer rate of 345 kbaud. the afm-16 supervises the system power sources. the unit receives two voltage sources. one source is the main 24 vdc power supply and the second is a 24 vdc battery back-up input.
• the afm-16 continuously monitors the main supply and routs it to a continuous system use consisting of the afm-16 multiplexer and via it to all the analog transmitters connected. when power fail is detected, the afm-16 enters to power saving mode by applying the back-up battery as the system power supply for one second operation every three minuets.
• the transmitted data is tagged with a special code indicating power fail mode of operation. the afm-16 is equipped with battery periodically check routine detecting "low-battery" status. alert is provided by special code indicating "battery replacement" alarm.
• the afm-16 routes the power supply for the two wire transmitters connected via 16 individual 22 ma current limiters which prevent system collapse due to short-circuited input. the afm-16 is housed in a polycarbonate enclosure which can be mounted either on a 35 mm standard din rail.

specifications :

• inputs : 16, 4-20 ma current loops
• input impedance : 350
• outputs : 2 fiber optic (main and backup)
• fiber-optic connectors : st-3 type
• wave length : 820 - 860 nm
• conversion resolution : 12 bits
• accuracy : better than 0.1% of span
• scan rate : 15 msec/16 channels
• data transfer rate : 345.6 kbaud

power supply :

• main supply : 24 vdc 10%
• battery : 21.6 - 24 vdc
• supply consumption : 200ma

indicators :

• 1 yellow led, power "on" indicator
• 16 red led, current inputs' activity
• operating temperature : 0 - 70c
• storage temperature : -25 to +85c
• humidity : 5 - 95% relative, non condensed
• fuse : 630 ma, 5x20 mm fast blown
• housing : plastic polycarbonate
• box : according to ip50 din 40050
• terminals : according to ip20 din 40050
• weight : 0.9 kg