Our Products
Flexible Shaft Grinders are smooth running motors and are balanced dynamically for vibration free performance. These machines are available in variable speed both in Single Phase and Three Phase Power Supply. The motors are absolutely trouble free and mounted with an easily accessible rotary switch. These machines have low maintenance cost due to absence of frequent armature / carbon brush failure and clogging of filters compared to other universal and pneumatic tools.
TheFlexible Shaft Grindersthat we Manufacture, Export, and Supply is widely acclaimed by the clients due to its constant and high cutting speed. Sophisticatedly designed by adept professionals the Grinders are highly acknowledged in the domain. Our Flexible Shaft Grinders require a very little maintenance cost.
Our motors are thoroughly tested for insulation and overloading; incorporated with a high quality windings and bearings. The motors are absolutely trouble free and mounted with an easily accessible rotary switch.
Our flexible shafts are manufactured with superior quality raw material to ensure longer product life. The shafts can be easily fitted or dismantled from the motor at one end and tool holder at the other end.
Our tool holders to suit different applications like mounting of grinding wheels, mounted points sanding discs and right angle attachments. The individual components in the assembly of the tool holder are made with proper heat treatment, dimensional and surface finish, forms, profiles etc.,
The separation of drive unit and the tool itself provides for complete freedom of operation, without fatigue, during long working periods. Additionally, areas difficult to reach with other tools can be worked effectively with flexible shaft machines.
Our program embraces single-multi and infinitely variable speed machines. Operating speeds based on long, practical experience provides for optimal cutting and surface speed, which guarantees maximum stock removal and also economic tool factor.
Advantages of machines with flexible shafts:
RPM | MODEL | H.P. | VOLTS | PHASE | Suitable Shaft Length | Area of Application |
2800 | Speedo 28 VRA 2800 | 1.5 | 415 | 3 | 15 x 2000 mm | Fabrication shop, Rubber Retreading |
2800 | CONTIFLEX | 1 & 2 | 415 | 3 | 5/8 X 2 Mtr | Fabrication shop, Rubber Retreading |
2800 | Speedo 28 VRA 2800 | 1.5 | 220 | 1 | 15 x 2000 mm | Fabrication shop, Rubber Retreading |
5800 | Speedo 58 VRA 5800 | 1.5 | 415 | 3 | 15 x 2000 mm | Foundries for primary heavy fettling and cutting, Forging and Fabrication shops for weld |
5800 2800 | Speedo 58/28 (two speed) | 1.5 | 415 | 3 | 15 x 2000 mm | For Weld Grinding, Buffing |
8000 | Speedo 80 VRA 8000 | 1 | 415 | 1 | 12 X 1500 mm 12 x 2000 mm | Foundries of Cast Iron, Pencil Grinding, Mould Grinding |
12000 | Speedo 120 | 1 | 415 | 1 | 10 x 1500 mm 10 x 2000 mm | Finish Job with mounted point and Rottary Bur |
1600, 2880, 8000 | Multi Speed (Belt Driven) | 2 | 415 | 3 | 5/8 x 2 Mtr | Heavy Duty Buffing,Polishing and Grinding Job |
Our clients can avail a high quality range ofArm Light, which is available in 9W, 11W & 18W. To meet the
diverse requirements of the clients, we offer these lights in varied specifications. The desired life of our CFL
with OSRAM is 8000 hrs. These lights are widely used in the industry for their durable and power saving quality
For better illumination on all types of conventional machines | |
Models | : ML915/ML1115/ML1815 |
9W=60W Bulb11W=75WBulb18W=100WBulb | |
Tube Light | : Osram make 9W/11W/18W PL (White/Yellow) with expected life of 8000Hrs. |
Ballast | : Philips / b,a,g. make Electro-magnetic ballast 230 AC |
Power Consumption | : 11W/13W/20W |
Lamp Enclosure | : Powder coated enclosure |
Stand | : Sturdy, vibration and shock resistant powder coated, 15" Aluminum pipe stand |
Protection | : Splash resistant - 2mm Acrylic cover with Nitrile rubber gasket |
Cable | : 3 Core cable x 2 Meters |
Mounting | : Horizontal/vertical mounting with switch |
Leveraging on our sophisticated infrastructure, we are able to develop world-class Flexible Shaft & Grinders that are known for their smooth running motors attribute. These grinders are dynamically balanced for vibration free operation. Our machines are offered in different speeds both in Single Phase as well as in Three Phase Power Supply. The motors are completely trouble free and equipped with an easily accessible rotary switch. Owing to the absence of frequent armature/carbon brush failure and clogging of filters, our machines possess low maintenance cost. These grinders are widely used in varied industries like foundries, fabrication and rubber retreading.
CONTINENTAL COMM. CO is pioneers in the field of Flexible Shaft
These are used to transmit rotary power along the curved path in any field with the ability to transmit high RPM under continuous working conditions for Buffing, grinding, Polishing, Tyre retreading and General applications. It is also widely accepted in Sugar Industries and Boiler Tube Cleaning Equipment.
Flexible Shaft is especially suitable where the machines cannot be moved. They can be very handy in Fixed Position Layout Industries. Working with a variety of jobs and applications usually means acquiring a whole lot of different tools and machines. Not so with our flexible shaft machines. Here we have versatility, adaptability, and convenience together with full power - from the most precise work in mobile operations to heavy-duty work under extremely difficult conditions.
Shafts are available in variable lengths with standard diameter size.
Flexible shaft for specific applications can be manufactured as per customer's requirement and specifications.
I.E. 1/2", 5/8" AND 3/8" WITH LENGTH RANGING FROM 2 METERS UPTO 30 METERS.
Length: The shaft length is provided in various sizes to suit the individual geometry of the product. You have to select the adequate length of the shaft so that you can use the grinder comfortably with minimum bends and curves. At the same time avoid excess length of shaft, as the more the shaft length the more the cost and more the wear.
Type: The metal shaft is lighter in weight and has less fatigue for operator. The rubber shafts are more durable than metal but heavier in weight.
RPM | Flexible shaft Size / Type | Type | Suitable End Connection | Tool holder | Cutter |
12000 | 10x1200 mm | Metallic / Rubberised | 10 mm | WS-10, FH 10, FF 2 with 6/6.35 mm Collet | For Mounted Points and Rottary Bur |
12000 | 10x1360 mm (KPT/FF2/KF2 Type) | Metallic / Rubberised | Pin Type | WS-10, FH 10, FF 2 with 6/6.35 mm Collet | For Mounted Points and Rottary Bur |
12000 | 10x1500 mm | Metallic / Rubberised | 10 mm | WS-10, FH 10, FF 2 with 6/6.35 mm Collet | For Mounted Points and Rottary Bur |
12000 | 10x2000 mm | Metallic / Rubberised | 10 mm | WS-10, FH 10, FF 2 with 6/6.35 mm Collet | For Mounted Points and Rottary Bur |
8000 | 12x15 mm | Metallic / Rubberised | 12 mm | WS-10, FH 10 with 6/6.35 mm Collet | For Mounted Points , Rottary Bur and Grinding Wheel up to 4" |
8000 | 12x200 mm | Metallic / Rubberised | 12 mm | WS-10, FH 10 with 6/6.35 mm Collet | For Mounted Points , Rottary Bur and Grinding Wheel up to 4" |
5800 | 15x1500 mm | Metallic / Rubberised | 14 mm | WH 15 | For Grinding Wheels and Buffing Wheels (Heavy Duty Jobs) |
5800 | 15x2000 mm | Metallic / Rubberised | 14 mm | WH 15 | For Grinding Wheels and Buffing Wheels (Heavy Duty Jobs) |
2800 | 5/8 x 2 Mtr | Metallic / Rubberised | 14mm 1/2"BSW 3/8 UNF | With 5/8" BSW Holder | For Grinding Wheels and Buffing Wheels (Light Duty Jobs) |
We manufacturePanel Lightis usually used in advanced commercial area, such as office building, meeting
gallery, reading area. It is not a direct lighting source. The light is reflected by professional material. LED panels
are anti-glare, but give off bright light. The light is soft and easy on the eye. The panel lights are of superior quality
but priced competitively for the convenience of our customers.
For glare-free close visual inspection | |
Lamp Enclosure | : Plastic moulded enclosure |
Power LED | : Osram - PL -11 W |
Ballast | : Philips / b.a.g, make Electro-magnetic ballast-230 AC |
Mounting | : 330mm x 5Omm x 1.2mm thick powder coated mounting plate |
Plastic Chain - Solid 7 mm
Used for crowd control, displays, gardens, and numerous non-load bearing uses. Bag of 100 meter. Various colour available
Plastic Chain - Solid 4mm
Used for toys, pets, displays, gardens, and numerous non-load bearing uses. Bag of 100 meter. Various colour available
Model | Dimension | Wtg per 100 mtrs. | ||
Chain ∅ | Inside Length | Outside Width (W) | ||
CCC Chain 4 | 4 mm (.100”) | 1” | .625 | 45 Kgs |
CCC Chain 7 | 7 mm (.025”) | 2” | 1” | 65 kgs |
We are the most alleged Manufacturer & Dealer of Collets, Collets Chucks and Milling Collets.The quality of its products and reliability have fetched it accolades of discerning Clients.
We encompass wide range of Collets and its Accessories.
Owing to our vigilant and industrious workforce, we deal in the Trading and supplying of Mounted Points. These points are fully customizable and are manufactured at par with the set industry standards. Further, these points adhere to the industry code of conduct and are specially reputed for its precise functionality. Finally, these mounted points have economical prices and do not require much maintenance.
Features:
Excellent fabrication.
Marvellous quality.
Outstanding functionality.
Wesupply unmatched quality mounted points in A, B & W groups with 3mm/6mm spindles.Our mounted points are used by many reputed industries throughout the world. All the reliable mounted points are supplied at affordable prices to suit each user's budget. These abrasive mounted points are designed and developed by highly qualified professionals.