Measuring Instruments & Equipment #2995707

we are pleased to introduce our new torque make positive displacement flow meters for oil, diesel, petrol, kerosene or any slightly viscous non corrosive liquids; this is reset type, mechanical flow meters.

oval gear flow meter is a kind of positive displacement meter to measure the liquid flow or instantaneous flow of the pipe tube. It is a kind of accumulate meter. With characteristics of high accuracy, small change by the fluid viscosity, it is widely used to measure oil kind liquid, but it is forbidden to measure corrosive liquid

the measurement part of oval gear flow meter is posed by two elliptical gears mesh with each other and its shell (measuring room).
the figure shows that the flow meter works by two elliptical gears to mesh with each other, its working process are as follows: p1 in the figure shows the pressure of liquid from inlet side, to show the outlet pressure, the bottom rotor has no rotating torque even it effected by the liquid pressure, but the above gears will move by the rotating

torque caused by liquid pressure. As the two gears mesh with each other, they move with o1, o2 axis of rotation direction of the arrow, meanwhile, gear o1 will push the liquid out from half-moon space. In the status of the above gear is driving gear, and the bottom gear is driven gear. Both of these two gears have rotating torque by the liquid pressure, and they move with the direction of the arrow to space the gear space is opposite to, the bottom gear is driving gear, and above gear is driven gear. The bottom gear pushes the liquid out from the half-moon space under the liquid press pushes liquid volume four times of measurement room. So, as long as the rotation of gears, the liquid volume can be counted. Ure. Such continues working, the gears turn a circle, it pushes liquid volume four times of measurement room. So, as long as the rotation of gears, the liquid volume ca n be counted. We are #1 supplier / manufacturer of gear flow meter, gear pump in india. Contact gear pump manufacturer, gear pump supplier in india.

accuracy : + / 0.5 %

flow range : 7-40 lpm

max temp : 70 c

max pressure: 7 bar

torque make series 6400 ( full bore type ) are new range of bipolar pulsed dc full bore type electromagnetic flow meters. It is suitable for pipes with nominal diameters of dn 10 to dn 600 . They are based on faradays law of electromagnetic induction. The series 6400 meters features flanged construction and is available with choice of liner and electrode materials. Series 6400 has excellent accuracy and flow range ability. The meter is suitable for use on wide range of corrosive and aggressive range of conductive liquids.

based on faradays law of electromagnetic induction
suitable for pipe sizes of diameters 10 mm to 600mm
coil assembly in hermetically sealed welded construction
choice of ptfe / neoprene rubber / polyurethane liners
integral or remote transmitter
field interchangeable electronics
optional led display for flow rate or totaliser indication in engineering units.
no pressure loss
absolute zero stability and noise elimination.
measurement independent of liquid properties.
display of flow rate directly in user specified engineering units
negligible pressure loss
maintenance free design due to absence of any moving parts
high linearity due to characteristic magnetic field

an inferential, single jet, super dry straight reading type, hermetically sealed water meter with magnetic drive.

orifice plate is used for flow rate measuring in pipe systems. With orifice plate, pressure drop is created. Based on the magnitude of pressure drop, flow rate can be calculated. Orifice plate calculator can be used for both liquids and gases. Fluid is considered as in- compressible, so density (rho) and temperature (t) are constant through tube. Also, gas is considered as ideal.

suitable for liquids, gases and steam applications in line sizes from dn15 to dn200 and at pressures up to 100 bar, it combines all the major components needed for an orifice plate installation in one assembly. This eliminates the need for users to design, source and in- stall a separate manifold, transmitter and impulse piping, typically cutting the cost of installation and commissioning.

the all-in-one design also offers enhanced accuracy and a faster speed of response, with no problems caused by issues such as long or blocked impulse lines, or impaired signals due to condensation in gas system impulse lines or gas bubbles in liquid lines.

the compact orifice flow meter series is designed for closed loop control and general purpose monitoring applications. This design lowers the total installed cost of dp flow measurement points eliminating the need for fittings, impulse tubing, valves, adapters and manifolds by providing a single device packaged together for simplified installation. By integrating pressure transmitters with the compact orifice primary element, we deliver the highest performing flow meters which arrive assembled, calibrated, pressure tested, and ready to install.

the conditioning compact orifice is ideal for applications with limited pipe run. Only requiring 2 pipe diameters from an upstream disturbance (double elbows, valves, reducers), the conditioning compact orifice delivers + 0.5% accuracy.

savings in excess of 50% can be realized when compared to a traditional orifice plate installation.
reduced straight pipe run
less expensive than an orifice plate installation
accurate and repeatable
centering mechanism
based on asme / iso corner tap design

in addition to the conditioning compact orifice, an orifice plate offering is available with the conditioning orifice plate technology and provides the same accuracy and performance you achieve with the compact design.
throttling device is a differential pressure flow meter sensors, with the differential pressure transmitter and display devices (or computer) supporting the use, enabling the measurement of fluid flow and achieve the accumulation, display and control. Because of its simple structure, easy installation, the use of reliable and suitable for a wide range of (standard throttling device diameter measurements available from 50mm-12mm, a special application of throttle device can also be as small as 20mm diameter as large as 3000mm; measuring temperatures of up to 550c pressure up to 40mpa: measured the types of media is greater) and standard throttling device also has no separate calibration of the advantages of industrial automation control flow measurements during the course of one of the main instruments.

our company not only the production of conventional structure, throttling device, but also produce changes in the scope to meet the on-site a large number of process flow throttling device may change orifice throttling device.

Single Jet Class A & B, 15mm -20mm ( - )

An inferential, single jet, super dry straight reading type, hermetically sealed water meter with magnetic drive.

STANDARDS:-

Complies with class A & B of IS-779/94 also ISO & EEC.

CONSTRUCTION:-

• Highly sensitive to low flow rates and very accurate over its entire flow range.


• Having low loss of head which allows water to reach upper floors.


• Sealed against tampering.


• Totaliser leakproof, totally dry.


• Long maintenance free life.


• Self lubricating gears and bearings.

OPTIONS:-

TEP Water meters with EEC Mark

MODEL FM-120:-

• Diaphragm diesel Flow Meters, Designed for metering diesel fuel , gasoline , kerosene , mineral spirits , with the advantages of large , easy to read numbers , Quick reset knob , Flexible flow ports can be positioned vertically or horizontally. The easy reset register indicates product use up to 999.9 gallons or liters. The master tantalizer registers up to 99999999 gallons or liters.

FEATURES:

• Turbine Base Working


• Plastic Body


• Lithium Battery which has life 3 years


• Accuracy depend on Installation+5

Applications:-

Turbine flow meter transducer adapts to measure the liquid rate and total flow rate of low viscosity and for clear liquid.

It can be widely used in the fields of petrol, chemical Industry , Metallurgy , Scientific research for measuring or control.

Several output display methods can be selected.

Technical specification:-

• 
  

  High-accuracy: 0.2%, 0.5% , 1%

  
  


• Wearable Tungsten carbonized shaft and bearing


• 
  

  Erode-resistant applicable for sea water, ammonia , etc.

  
  


• 
  
  
  

  Bi-Direction measuring bi-direction flow (optional)

  
  


• 
  
  
  

  Multi-output pulse , 4-20mA DC, total and rate display in the field.

  
  


• 
  
  
  

  Power-supply 5-24 V DC,

  
  


• 
  
  
  

  Explosion-proof Ex d II BT4/Ex ib I

  
  


• 
  
  
  

  Pipeline range 6, 10, 15, 25, 40, 50, 80, 100, 150, 200, 250, 300 mm.

  
  


• 
  
  
  

TORQUE make Series 6500 is a new range of Bipolar Pulsed DC Insertion Type Electromagnetic Flow meter. It is suitable for pipes with nominal diameters of 100 mm & above. The Flow meter Is based on Faradays law of Electromagnetic Induction.
Series 6500 has excellent accuracy and flow range ability within its class. The meter is suitable for use on wide range of corrosive and aggressive range of conductive liquids.

Based on Faradays law of electromagnetic induction.
Suitable for pipe sizes of diameters 100 mm & above
With or without Integral Transmitter.
Use of Isolating Ball Valve and Pressure Seal arrangement permits ease of mechanical Insertion and removal without disturbing the flow
Absolute zero stability and noise elimination due to pulse D.C. excitation
Measurement independent of liquid properties
Optional inbuilt potentiometer provides full scale flow rate adjustments.
Negligible pressure loss.
Maintenance free design due to absence of any moving parts.
Display of flow rate directly in user specified engineering units

Water Supply Networks
Chemical and Process Industries
Pharmaceutical Industry
Waste- Water Management
Sugar, Food and Beverages industries
Effluent Treatment Plants

Applications:-

Turbine flow meter transducer adapts to measure the liquid rate and total flow rate of low viscosity and for clear liquid.

It can be widely used in the fields of petrol, chemical Industry , Metallurgy , Scientific research for measuring or control.

Several output display methods can be selected.

Technical specification:-

• 
  

  High-accuracy: 0.2%, 0.5% , 1%

  
  


• Wearable Tungsten carbonized shaft and bearing


• 
  

  Erode-resistant applicable for sea water, ammonia , etc.

  
  


• 
  
  
  

  Bi-Direction measuring bi-direction flow (optional)

  
  


• 
  
  
  

  Multi-output pulse , 4-20mA DC, total and rate display in the field.

  
  


• 
  
  
  

  Power-supply 5-24 V DC,

  
  


• 
  
  
  

  Explosion-proof Ex d II BT4/Ex ib I

  
  


• 
  
  
  

  Pipeline range 6, 10, 15, 25, 40, 50, 80, 100, 150, 200, 250, 300 mm.

  
  

50mm -500mm (2 - 20 )

A removable mechanism type Woltmann water meter with magnetic drive and vacuum sealed register.

STANDARDS:-

Conforms to ISO 4064 , Class-B

APPLICATION:-

Water Distribution Network industrial / Commercial water supply

FEATURES:-

• Leak proof and sealed totaliser.


• Magnetic drive.


• Repairable without interrupting water supply.


• Removable mechanism ensures easy maintenance.


• Totaliser protected by metallic cover.


• Reliable sensitive metrology and low pressure loss.

OPTIONS:-

• Hot water meters (

mass flow meter is working on the based of carioles force principle basically used for all the

liquid gas, steam, solid liquid mixture.

measuring range : 0-150 t/ h , accuracy :k0.20 %.

overview:-

we can provide wide flow measurement products. For almost all industries, we can offer complete measurement programs and perfect services.

• process control


• trade measurement


• gas , liquid , steam,


• high-temperature fluid, high-pressure fluid,


• micro-flow high flow,


• clean medium , the medium containing impurities


• low-viscosity , high viscosity


• corrosive medium

we provide the flow meters as below.

mass flow meter, electromagnetic flow meter vortex flow meter , metal tube rotameter and ultrasonic flow meter.

salient features:-

• based on faradays law of electromagnetic induction


• suitable for pipe sizes of diameters 10 mm to 600mm


• coil assembly in hermetically sealed welded construction


• choice of ptfe / neoprene rubber / polyurethane liners


• integral orremote transmitter


• field interchangeable electronics


• optional led display for flow rate or totaliser indication in engineering units.


• no pressure loss


• absolute zero stability and noise elimination.


• measurement independent of liquid properties.


• display of flow rate directly in user specified engineering units


• negligible pressure loss


• maintenance free design due to absence of any moving parts

applications:-

• water supply networks


• chemical , petrochemical and process industries

• pharmaceutical industries


• waste water management


• sugar, food , drug and beverages industries


• effluent treatment plants


• fertilizer industries


• beverage industries


• paper and pulp industires


• aluminium , steel , mining and dredging industries


• and many others