Creative Electronics

BPTP, Faridabad, Haryana

• Brand NameCreative
• Vertical Frequency30 Hz to 170 Hz
• Horizontal Frequency15 kHz to 145 kHz
• Impedance75 ohms
• Number Of Signal Type1 / RGB (computer video)
• Connectors1 female 15-pin HD

• MaterialMS
• Brand NameCreative
• Packaging TypeCarton
• DimensionW = 78mm x H = 28mm x D = 45mm
• PowerPassive (Self Powered)
• USB Version2.2
• Model NumberTx PART # CEUSB TX 4103.C Rx. PART # CEUSB RX 4103.C
• Cable Length45Mtrs
• Minimum Order Quantity1 Pair
• Product TypeUSB to CAT5 Extender over LAN Transmitter Receiver
• Power SourceSelf Powered

We offer VGA to CAT5 Converter. Creative introduces a high-performance CAT5 Tx1003 Transmitter and Rx1003 Receiver to be used in pairs for the extension of VGA, Stereo Audio, and IR or RS-232 data. The RGB-to-CAT5 Converter (Tx1003) converts the RGB video, Stereo Audio, and IR or RS-232 to signal levels that can be transmitted up to 300M to the remotely installed CAT5-to-Display Device (Rx1003) using AT5CAT5eCAT678 UTP cable. Timing to correct the delay differences between the pairs : These are very cost effective, third-generation products which utilize application specific linear devices to provide the fastest video rise times and pixel cycling possible over UTP cable. Signal Loops and Dual Outputs, : The Tx1003 features loop thru VGA and stereo audio inputs, while the Rx1003 provides dual VGA and stereo audio outputs. Eliminating need of Distribution amplifiers in many system configurations

We offer 4 way pc distribution amplifier - audio lr pcda-1004. Creative’s 4 way pc distribution amplifier model audio lr pcda-1004 is a one rgb video –input and four rgb video-output pc stereo audio rgb video distribution amplifier specifically designed for driving multiple drops and long cables runs. This device works with any video resolution as it distributes the rgbhv from any video graphics source to four separate display devices. With 350 mhz of video bandwidth, and using standard vga cable, the lr pcda-1004 is capable of maintaining signal clarity with up to 150mtr. Of cable. Each output is a high current driver necessary to maintain the original signal quality over long cable runs. In fact, the lr pcda-1004 guarantees the proper driver impedance for all outputs which helps to reduce interference and noise under all conditions. Lr pcda-1004 is compatible with any lcd, plasma or dlp projectors, as well as any high-end crt monitor or video wa

We offer Avda 1004. AVDA 1004 is a one input, four-output Audio Video distribution amplifier with stereo audio on RCA connectors. With >200 MHz video bandwidth, this DA features Unity gain. For compensation of signal level loss that occurs over long cable runs. Individual buffers and amplifiers ensure that all output channels are equivalent in terms of signal strength and integrity to the original input signal. AVDA 1004 is designed to provide signal distribution and amplification for the professional Audio Video market - to meet specific system requirements for distributing multiple outputs from a single input. It provides increased system flexibility and performance. AVDA 1004 is compatible with NTSC, PAL, and SECAM video signals, allows cable runs of 1, 000 feet (300 meters) or more, depending on the quality of the cable used.

We offer Dvi Extender. Creative HDMIEx 1020.A is a series of DVI HDMI extenders designed to equalize and retime DVI HDMI signal paths in order to provide a low jitter version of the original clock and data signal at its output to drive a distant HDMI capable display. Signal Support - HDMITx 1020.A supports all the HDMI standards and features through 1.3. These expanded features include support for Deep Color and 1080p5060 HD resolutions with embedded 8-channel digital audio. HDMIEx1020.A can extend the useable length of HDMI DVI cables up to 35 meters by equalizing the input and regenerating the HDMI signal at the output before the signal is sent to the display.

We are offering pc distribution amplifier - pcda-1002 creative’s pc distribution amplifier model pcda-1002 is a one rgb video – input and two rgb video-output distribution amplifier specifically designed for driving multiple drops and long cables runs. This device works with any video resolution as it distributes the rgbhv from any video graphics source to two separate display devices. With 350 mhz of video bandwidth, and using standard vga cable, the pcda-1002 is capable of maintaining signal clarity with up to 150mtr. Of cable. Each output is a high current driver necessary to maintain the original signal quality over long cable runs. In fact, the pcda-1002 guarantees the proper driver impedance for all outputs which helps to reduce interference and noise under all conditions. Pcda-1002 is compatible with any lcd, plasma or dlp projectors, as well as any high-end crt monitor or video wall.

We offer USB to CAT5 Extender. Creative CE USB 4103.C series of USB to CAT5 Extenders, Extend USB Signal > 50mtrs using a single common UTP cable from the location of your computer or any other USB Device. This device is an extension cable between USB device and host (computer) with embedded into connector “intelligent” integrated circuits on both sides of the cable. These units are designed to work in pairs using a USB-to-CAT5 Transmitter (Tx) and a CAT5-to-USB Receiver (Rx) to extend the USB signal.

We are offering 4x1 audio follow video switcher creative introduces a high performance 4x1 audio follow video switcher for computer graphic video signals up to qxga resolutions. The pc4100afv allows ultiple computers to be switched to one display and audio monitor. The pc4100afv is compatible with rgb video levels and ihf level unbalanced stereo audio sources. The pc4100afv can be controlled via front panel momentary pushbuttons or remotely using amx crestron compatible commands via the rs-232 serial port. The pc4100afv also includes a sequence generator with a variable rate control. Using sequence allows the switcher to switch between the inputs sources at a preset rate. There is also a “skip mode” available so that when the switcher is in the sequence mode it will automatically skip inputs missing sync. When the pc4100afv is in the sequence mode the audio sources are muted.

We are offering si-4004 - relay box si-4004 is a relay box designed to control movement of projection screen projector lift drapes. All these functions are timer controlled. This can be configured to any rf control processors. This device can also switch on off complete equipment rack power. While doing integration of audio video equipments projection screen projector lift and drapes, controlled with touch panel (like amx and crestron or any other high end rf remote control system) in board rooms and auditoriums we require some interface to control movement of projection screen, lift and drapes which is connected with processor of touch panel. Or even complete rack in which all these equipments are mounted. Introducing you here with timer controlled dual function screen interface model si 4004. Which can control movement of motorized projection screen, projector lift, drapes and even complete equipment rack power.

We offer projection screen interface. projection screen interface - si-2002 projection screen interface, model si - 2002 device is with electronic timer controlled. This can control movement of projection screen and is compatible with any type of rf remote systems like (amx or crestron) you can also switch on off mains power supply to equipment rack. In case of failure to any device (processor or screen interface), provision is given to control screen movement manuall