Darshan Singh & Co.

Goraya, Jalandhar, Punjab

• Length of cut3/8'' to 1/2'' and 1/2'' to 5/8''

Toka Steel Geared type is fitted on Heavy Angle Iron Frame which is mounted on Heavy angle legs and braces, with forged feed, which enable the machine to be easily bolted to the ground. The bevel pinion gear system is used. Because of this system you you can change the motions (Reverse & Forward) instantly. This is a great advantage to machine as well as chocking of the machine. Length of cut can be changed with gear lever instantly. All gear are duly hardened. The main shaft of the machine is fitted with bearing.

• Width9"

Chaff cutter machine Works on 2 H.P. Single Phase Motor. Mounted on Steel Legs & Braces, with forged feet, makes the machine easily bolted on the floor. Width of rising mouth 9". The worm and gear are made from machined patterns, which makes the machine easy running and free from excessive friction. Machine is supplied with Iron feeding Chute, 22" machine pulley, nuts, bolts, Grease Cup and a Spanner Set. (Set of 3 Pcs.) Net Weight of Machine 160 Kg. (Approximately).

• Length of cut3/8'' to 1/2'' and 1/2'' to 5/8''

Heavy Duty Downward Blower type chaff-cutter is mainly developed for commercial use and for dairy with 100 or more animals. The chassis of this machine is moulded. And it is fit on Heavy Angle legs and braces, with forged feet. This enables the machine to be bolted to the ground. Wheels can be fit onto the legs to make the machine portable. The bevel pinion gear system is used; Because of this system you can change the motion (Reverse, Forward) instantly. This is a great advantage for the machine operator.