Surat, Gujarat, India
Our Products
Inline Micron Filters are used to remove dust particles from respective gases. Micron filter (SS body) consist of SS disc (Mesh) of 5 - 10.
Gas purification panel removes impurities which are in vapours (gases) form. Cylinders being M.S. body has the tendency to illute dust particles, these particles may come in the line and may go to gas chromatograph. To avoid this particles micron filters are very essential.
Our range of digital colony Counters come with complete assurance of premium quality. They are fabricated with quality raw materials, adding to the attraction. Our designers and experts are credited of offering our clients customized solutions within specified time limits.
Features
| Specification | : | The instrument is designed for accurate estimation of moisture in various Solid, Liquids or Gas samples. It works on Volumetric Principle. The incorporation of latest microcontroller based circuitry ensures trouble-free performance with perfect reproducible results and total reliability. The instrument is having a built in magnetic stirrer with speed controller. The Karl Fischer Reagent is added automatically to the reaction beaker by a highly sensitive motorized dispensing system. This dispensing system eliminates the need of Glass Burette, Piston Type Syringe, and Control Valves, thus greatly minimizing of hazardous and corrosive Karl Fischer Reagent. The dispensing makes the instrument very easy for day to day maintenance. A Printer Port, compatible with 80 column Dot Matrix EPSON printer, is available for printing the results of the sample under test. |
Useful for uniform mixing by circular motion in a horizontal plane with a circuit diameter of about 25 mm. Used extensively in tissue culture work, aeration of fermentation and other chemical mixing procedures. The driving mechanism is enclosed in a mild steel sheet cabinet beautifully painted. The motor used is induction type split phase and has a variable pitch pulley system with V belt drive, 150 to 250 oscillations approx. Optionally the shaker can be fitted with DC Motor with electronic speed regulator in place of variable pitch pulley system. The DC Motor will ensure continuous work and precise speed control. The shaking speed will be 50-250 RPM approx. The top platform have neoprene rubber discs to hold conical flask in between them.
New improved model with variable system and DC motor to work on 220 volt AC.) The apparatus consists of an evaporating flask rotated by non-sparking electric motor in heating water bath. The drive unit is clamped in V shaped heavy duty stand. The introduction tube permits continuous feed of the liquids into evaporating flask and also distillation under controlled atmosphere. The evaporating flask is pear shaped to give a large surface area for evaporation, clamped to a glass duct which goes through the drive unit and produced into the condenser is fitted with B-19 joint through which introduction tube is inserted. The condenser spherical join S-35 at the bottom of the condenser to receiver flasks cap, 1 litre of corning glass With ball point socket. Complete units is fitted on 'v' shape heavy duty stand with quick jack action. Waterbath and vacuum pump at extra cost.
The UV cabinets that we manufacture are suitable for scrutinizing thin-layer chromatograms and the objects in undarkened room. The front of the box has a magnetic lock and a glass filter is offered to protect the eyes against UV light. We ensure to maintain the perfect distance between UV lamp, object and the observer's eye. Our range is aailable with followingtechnical specifications:
| Model | Mild Steel, Powder Coated |
| Size | 15" X 12" X 10" (H) |
| View Piece | Alluminium Casting with Eye Protection |
| Light Source | A) Short Wave - 254 nm. B) Long Wave - 365 nm. C) Visible Light |
| Tube Size | 12" Long |
| Working | Individual Toggle switch provided for each light |
We also supply Micro Processor UV-VIS Spectrophotometer (Single Beam) and they also score on points like versatility, ruggedness, easy operations complete accuracy while determining absorbance, % transmission and concentration of liquid. Our massive infrastructure and efficient team are responsible to maintain the quality and durability of the product and they follow standard procedures regarding manufacture and safe keeping.
Some features include:
| Model | DT-147 |
| Wavelength | 195 to 1000nm |
| Spectral Bandwidth | 2 nm |
| Accuracy | + 0.5 nm |
| Repeatability | + 0.3 nm |
| Resolution | 0.1nm |
| PHOTOMETRIC | |
| Photometric Range | 0.1 nm% T: 0 to 100%, Abs.:0 to 1.999 Conc.:0 to 1999, K-Factor:0 to 1999 |
| Accuracy | +0.005 Abs at 1.0 Abs +0.010 Abs at 1.0 Abs |
| Stray Light | Less than 0.1% Abs at 320 nm |
| Readability | + 1 Count |
| Data Readout | Single Line LCD display 4 Keys, Soft touch membrane type |
| Painter Interface | Printer interface for any centronics dot matrix printer |
| Serial Interface | RS 232C interface |
| Light Source | a) Tungsten Halogen Lamp b) Deuterium Lamp (D2) |
| Detector | Wide range Silicon Photodiode |
| Optics | Complete mirror optics with resolution 1200 grooves/mm grating |
| Sample Holder | 4 position adjustable sample holder |
| Power | 230V + 10%, 50 Hz. AC |
| Dimensions | 420 x 350 x 240 mm (lxbxh) Approx. |
| Weight | 10 Kg (Approx.) |
| ||||
GENERAL DESCRIPTION & SPECIFICATIONS Double walled, outer chamber made of G.I. - powder coated, with removable toughened Glass window panel, inner chamber made of S. S, FHP motorised stirrer for uniform temperature, Dual Display Microprocessor Based Digital Temp. Controller with PT-100 sensor. Temperature range from 5 C above ambient to 100 C., Control accuracy 0.1C. Below ambient Viscosity Baths are fitted with Refrigeration system (Temperature Range : 10C to 100C). The Baths can accommodate 2 / 4 / 8 Viscometers with varying tank volumes. | ||||
OPTIONAL ACCESSORIES The following accessories are not part of the standard supply and are supplied at an extra cost
| ||||
REVERSE FLOW VISCOMETER The viscometer is made of clear borosilicate glass free from visible defects. All glass tubing used in the construction of a single viscometer is of the same composition and the finished instrument is thoroughly annealed. The design and details of the viscometer are given at side. The size, approximate constant and Kinematic Viscosity is as per table. | ||||
| Specification | : | With three heat control and energy regulator. Maximum Temp. : 450 C. Capacity : 50ml, 100ml, 250ml, 500ml, 1 Liter, 2 Liter, 3 Liter, 5 Liter, 10 Liter, 20 Liter, 50 Liter, 100 Liter, 200 Liter. |
In this improved model, ceramic fiber wool insulation (instead of brick insulation) has been provided resulting in weight and size reduction of furnace. The weight and size of the furnace is 1/4 and 30% respectively as compared to brick furnace. The heat up time is less. heat loss is very low-resulting in power saving. |
| Model | DT-119 |
| Construction | CRC sheet with stoving enamel |
| Insulation | Ceramic fiber wool insulation |
| Max. Temp. | 1200°C |
| Working Temp | 1150°C |
| Temp.control | Dual display microprocessor based Digital temperature indicator cum controller with Cr/A1 Sensor |
| Heatings | KANTHAL APM wire in coil form wound on the muffle, embedded in high grade refractory Cement. |
| Std.Fittings | Compensating cable, indicating lamps, Power plug and cord. |
|
Operation |
220/230 Volts AC single phase |
Body made of cold rolled sheet duly powder coated. Table made of S. S. 304, front door of clear acrylic, UV lamps will be Phillips/equal imported make. Other standard accessories such as Manometer, gas inlet, castor wheels, illumination, additional power point are included in the price.
Working Size
2 X 2 X 2
3 X 2 X 2
4 X 2 X 2
6 X 2 X 2
NOTE :THE LAMINAR FLOW CABINET CAN BE MADE OF S. S. INSTEAD OF MILD STEEL AT AN EXTRA COST.PRICE ON REQUEST.
Pressure Differential Manometer will indicate the pressure behind the HEPA FILTER and after few years, the pressure will be more because of accumulation of dusts at the upstream side. Once the pressure level indicates above 22 mm WG in the manometer or the velocity at the downstream side falls below 60 feet per minute, the filters may be replaced. The velocity can be monitored by using external anemometer.
A microscope is an instrument to see objects too small for the naked eye. The science of investigating small objects using such an instrument is called microscopy. Microscopic means invisible to the eye unless aided by a microscope. There are many types of microscopes, the most common and first to be invented is the optical microscope which uses light to image the sample |
Carries up to 7 sieves of 150mm or 200mm diameter. The sieve shaker is driven by h.p. motor through a reduction gear immersed in oil. The sieve table does not rotate, but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop pin-below the table is removed, the shaker can have a rotary motion. In addition to this gyrator motion of the table, there is a pair of rods and a holder are supplied. The holder can be fixed on the top of the upper cycles phase, A.C. supply. Nett weight approx. 80 Kgs
Accessories: Adaptor for 30 cm. Diameter sieves. Time switch 0-60 mins. In 5 mins graduation.
Benefits for GC:
nside chamber, outside chamber, fly screw, cross pin, flange and die pressed lid ar
Construction:
Inside chamber, outside chamber, fly screw, cross pin, flange and die pressed lid are fully stainless steel (304) All internal joints are argon welded.
Fittings:
Lid is fitted with pressure gauge, safety valve (set at 15 psi) , extra safety valve / fusible plug (set at approximately 20 psi) , manual exhaust valve and vacuum breaker. Drain valve at bottom. Model Neoprene gasket.
Electric:
Specially designed industrial grade energy efficient heaters which reduces the heater wattage and hence power bills by about 30%
Supply 240 V A C 50 HZ, single phase.
Standard accessories:
Heater cover stainless steel X Stand.
Digital Timer
Digital Temperature indicator cum preset controller
Miniature circuit breaker
Automatic purging
End cycle buzzer and auto shut off for a truly automatic operation, once it is set and started.
Process
Once the water is filled, the material loaded the timer set the lid tightened and power switched on the process is fully automatic to the end. Automatic purging (free steaming) taken care of by a solenoid valve. The preset temperature (121'deg C) is attained.
AFTER attaining the set temperature, the countdown of the timer starts. During this period the controller maintains the emperature (pressure) by switching off / on heaters, This saves precious energy and hence money. After the preset time, there is an audio alarm, the solenoid valve opened to exhaust the pressure, and the system switched off.
Size of Working Chamber Rating
( CMS. )
30 X 50 2. 0 KW
35 X 55 3. 0 KW
45 X 60 4. 0 KW
55 X 75 6. 0 KW
KI-167 Water Distillation Still Manesty Type single walled for continuous distillation made of all Stainless Steel. It Provides water of High purity pyrogen free, chemically pure for use in Hospital, School, Colleges, University & Research Laboratories. The instrument is having constant level device and fitted with immersion heaters having Automatic cut out device, operating on 220/230 Volts AC/DC.
PRECISE MEASUREMENT
Precise measurement of Reflective Index 1.3 to 1.7 with an accuracy of 0.001 direct in scale and 0.0001 by estimation and sugar percentage range 0-95% with an accuracy of 1% on scale and 0.1% by estimation.
IMPROVED MODELEnclosed eye pieces with fine optics. Precise measurement of Reflective Index 1.3 to 1.7 with an accuracy of 0.001 direct in scale and 0.0001 by estimation and sugar percentage range 0-95% with an accuracy of 1% on scale and 0.1% by estimation
Gas manifold is used to connect two or more cylinders of same type with common cylinder regulator. The advantage of using manifold is to change from empty cylinder to filled cylinder without disconnecting the gas. MOC is brass chrome plated with ISI mark valve. It also consists of high pressure flexible pigtail of 1 meter long with " teflon tubing with SS brading with mounting bracket. The manifold are also available for two or more cylinders.
Gas distribution panel is used when there is more than one Gas Chromatograph. It helps to controlled the flow & pressure of different gases for different GC's. Gas distribution panels are available in three different types. One is with pressure gauge (to indicate pressure), pressure regulator (to control pressure), ON/OFF valve (to isolate). Second with pressure gauge and ON/OFF valve. Third is with only ON/OFF valve.
Cylinder mounting brackets are used to mount the cylinder on wall to avoid down fall of cylinder. There are two types of cylinder mounting brackets available one with wall mounting and another with floor mounting.
Cylinder trolleys are used for smooth transportation of cylinders from one place to another place. Specially designed (Four Wheel) for easier handling of cylinder.
Tubing are available in different sizes like 1/2", 1/4", 1/8", 1/16" which are available in copper, S.S., teflon, nylon. Size of the tubing are decided on required flow & pressure.
Casing capping are used to cover the above tubing & to maintain the esthetic look.
Three types casing capping available, M.S. powder coated, alluminium powder coated & PVC casing capping.
