Automation Panels: Electronic controls, PLC, HMI & Mimic diagrams.Auxiliary Control Panels: With logic controllers, contactors, timers, relays etc.Variable Frequency Drive Panels: Fractional HP to few hundreds of HP and communication with PC.Control Stations: Customize control stations for operator commands. PC Display Consoles: Customized consoles for operator interface and display. PLC based Automation Solutions Design and Development of PLC based systems PLC programming (All Major PLC brands) HMI programming (All Major HMI brands) SCADA programming (All Major brands) Variable Frequency Drives and Motion Control Solutions Identification of drive Tuning and parameter setting

Designing and Execution of 11 22 33 66 132 kV switchyard job with 66 KV OH Line consisting of engineering preparation of system design & drawings supply installation testing commissioning of switchyard equipments like 2-pole structure, OH line, transformers, Breakers, HTLT Panels, HTLT cable laying & termination, Earthing Stationsystem, Lighting, etc. complete.Supply, Installation, Testing and Commissioning of electrical equipment like HTLT Switchgear, Transformers, HTLT Motors, Alum. Bus-duct of rating 600800100016002500 3200 Amp, control panels, distribution boards, interlock testing, protection checks, primary and secondary injection, relay testing, etc.Design, Fabrication, Installation, Testing and Commissioning of Power Control Centre, Main Power Distribution Board, Motor Control Centre, Main Lighting Distribution Board, Automatic Power Factor Correction Panel, thyristorised Control Panel, HTLT Bus ducts, Programmable Logic Control Panel and other panel boards as per tailor made requirement.

Designing and Execution of 11 KV to 400 KV switchyard job with EHV OH or UG Line consisting of engineering preparation of system design & drawings supply installation testing commissioning of switchyard equipments like structure, transformers, Breakers, CT-PT, HTLT Panels, HTLT cable laying & termination, Earthing Stationsystem, Lighting, etc. complete.

Testing of Protective relays, Transformer Oil testing, Calibration of Ammeter, Voltmeter as per ISO procedure, Hypo test of cable etc.Round the clock maintenance in the field of Electrical and instruments.Providing man power services for Electrical & Instrumentation Installation & commissioing.

The Solar Business Vertical provides EPC solutions for building Solar Power Plants based on Photovoltaic (PV) technology (Grid Connected as well as off Grid). This vertical also provides solutions for providing power from other renewable sources like Solar Thermal, Wind and Biomass. Our Solar Business vertical provides complete EPC solutions for Solar Power Generation including Site evaluation, Design for Solar farms, HVLV Panels, Inverters, Instrumentation, Power Evacuation, Power distribution as well as Operation & Maintenance. Our existing vertical provides cost effective, reliable O&M for solar energy projects utilizing a large, wide spread network of skilled manpower across the country.

Designing, installation, testing and commissioning of illumination systems in industrial plants, outdoor & indoor, consisting of different types of lighting fixtures (normal flameproof typeincreased safety type) installation of walls, structures, chimney, Offices, control etc.

Designing, installation, testing and commissioning of illumination systems in industrial plants, outdoor & indoor, consisting of different types of lighting fixtures (normal flameproof typeincreased safety type) installation of walls, structures, chimney, offices, control etc.Designing, installation, testing and commissioning of street lighting system using mhhpmvhpsv lighting fixtures, ms tubularrail poles, psc poles incl. Tower lighting etc.Designing, installation, testing and commissioning of earthing system consisting of pipe typeplate type earthing stations, incl. Relevant civil works, installation of earth strips, grid formation, interconnection, equipment earthing.Designing and installation of lightning protection systems incl. Installation of lightning phenyls on high rise structures, buildings, tanks, laying of strips, earthing stations, etc.

Fabrication of structures, ladder type cable trays, joining of readymade trays, accessories, frame work, heavy supports structural work for the trays, base frames, etc., D.G. set installation, testing & commissioning including preparation of drawing & approval of Installation from the Electrical Inspector as per Govt. Rules & Regulation.

Design, Schedule, Preparation and Laying of HT & LT powercontrol cables, special instrument & control cables underground or on trays, walls, structures, etc. as required.Cable end termination of HT & LT, OutdoorIndoor types using Heat ShrinkPush on type terminations and making of straight through joints using Compound Heat Shrink type kits.Detailed instrumentation design to suit process requirements., Preparing of final P & ID tag nos, Selection of instruments & spares requirement , Instruments list data sheets specification, Procurements of instruments including sensors, cables & accessories , Procurements of junction boxes, tubing, cable trays, etc, Installations & commissioning of instruments, sensors, cables, transmitters including support fabrication , Supply & installation of instrumentation control panels, Loop testing & calibration of instrumentation system , Design development & installation of PC, PLC, SCADA & DCS system

MV switchgear panelsRatings: 3.3KV6.6KV11KV, 630 to 3150Amps, 20KA, 31.5KA, 40KA 3 secElectrical Control Panels (L.T.)Power Control Centers (PCC): Upto 6300A with ACBs, SFU FSU, MCCB Units, etc. Bus Ducts: Upto 6300A with Copper or Aluminum busbars.Motor Control Centers (MCC): Rated Current up to 4000 A , Draw out Type, Non-draw out type, SINGLE FRONT or DOUBLE FRONT.LDBPDB: Rated Current up to 3200 A , Vertical, horizontal, trolley mounted and customized arrangements with wide range of input and output ratings.APFC Panels: Rated capacity up to 750 KVARAMF and Synchronizing Panels: AMF Control Panel is for controlling two DG Sets, Master DG and slave DG Range from 250KVA to 3000KVA, Suitable to operate with multiple electrical sources.

Maintenance Systems of Underground Power Transmission SystemInstallation of Underground Cable Installation of Instrumentation CableInstallation of Cable Conduit Trays Civil Work for Power Cable InstallationMaintenance of Power Cable Systems Cabel Temprature Monitoring System (Distributed Temprature Sensing) Deterioration Diagnosis System for Power Cabel

We are pioneer in providing reliable and quick testing & commissioning services for substations equipments and its protection system. Latest testing infrastructure and experienced testing team providing testing services for new projects and during the routine maintenance of running plant. High voltage testing facility up to 100KV AC and 60 KV DC becomes handy when it comes to Testing of switchgears, Cables and other Medium Voltage equipments.