Product / Services
Post Buy Requirement
DP
Deep Photonics Instrumentation
hisar, Haryana, India
Verified Add Review
Call 08069182174 Ext. 745

Our Products

  1. Lamps 4 Products available
  2. Cabinets & Enclosures 26 Products available
  3. Filters 10 Products available
  4. Others 68 Products available

Other Products / Services #4533594

Calibration Light Sources

Calibration Light Sources

Calibration Light Sources are consisting of NIST traceable calibrated lamps that are reliable sources of spectral irradiance in the UV to NIR. We provide various sources for, excitation, illumination as well as both spectrometer wavelength calibration sources and radio-metrically calibrated sources. One can use a calibration light source to calibrate your own irradiance source, or to transfer our NIST traceable calibration to a spectroscopic detection system. To achieve the highest accuracy, we suggest you to use a spectral line lamp for wavelength calibration and for power level calibration this calibrated irradiance lamp with a stabilized, radiometric power supply.Calibration Light Sources are consisting of NIST traceable calibrated lamps that are reliable sources of spectral irradiance in the UV to NIR. We provide various sources for, excitation, illumination as well as both spectrometer wavelength calibration sources and radio-metrically calibrated sources. One can use a calibration light source to calibrate your own irradiance source, or to transfer our NIST traceable calibration to a spectroscopic detection system. To achieve the highest accuracy, we suggest you to use a spectral line lamp for wavelength calibration and for power level calibration this calibrated irradiance lamp with a stabilized, radiometric power supply.
View Complete Details
Ask Latest Price & Details
166-9010 Load Booster System

166-9010 Load Booster System

Voltage Range: 200V

Current Range: 20A

Sciencetech's Load Boost System is designed for short term loading of high output, flashed solar panels or other pulsed power sources when interfaced with, and controlled by, Keithley 2400 source meters.

This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The BI200 Load Booster allows our IV testing system to measure up to 20A up to the full 200V range of the Keithley. This increases the range of use of Sciencetech's IV Test systems, to allow testing of high voltage or high current solar panels.
View Complete Details
Ask Latest Price & Details
SSIVT-1KF) Current-Voltage Measurement System

SSIVT-1KF) Current-Voltage Measurement System

The SSIVT is an electrical current-voltage measurement system used to characterize photovoltaic cell performance. This current-voltage tester works by sampling various currents versus specific voltage combinations of the photovoltaic cell with a variable impedence load.
The voltage envelope is limited to 100V and the current is limited to 10A. For other maximum values of voltage or current, please speak with a technical sales staff member.
For further technical information, please see the technical datasheet.
View Complete Details
Ask Latest Price & Details
SSIVT-20F Current-Voltage Measurement System

SSIVT-20F Current-Voltage Measurement System

Sciencetech's IV Testers are electrical current-voltage measurement systems used to characterize photovoltaic cell performance. This current-voltage tester works by sampling various current versus voltage combinations of the photovoltaic cell with a variable impedence load. This IV Test system can measure electrical power from photovoltaic cells up to 20W. The voltage envelope is limited to 20V and the current to 1A. A higher power version, up to 60W, is available.
In general, the limitation on this model is the 1A current limit: if your solar cell generates more than 1A, we recommend upgrading to the 60W version.
View Complete Details
Ask Latest Price & Details
SSIVT-60F Current-Voltage Measurement System

SSIVT-60F Current-Voltage Measurement System

Designed for use with continuous or pulse solar simulators
An output trigger TTL signal is used to synchronize its data acquisition with pulse solar simulators Variable resistive load
Max Electrical Power Reading: 20W base model, 60W high power model
Base Model Voltage range 200V (can be modified with additional shunt to suit application)
Base Model Current range 1A (can be modified with additional coil to suit application)
High Power Model Voltage range 60V (can be modified with additional shunt to suit application)
High Power Model Current range 3A (can be modified with additional coil to suit application)
Separate terminal interface for voltage and current measurements
Interfaces to PC via RS232
Saves each IV curve dataset in separate ASCII text file
I-V range selectable
Number of sample points selectable (between 10-100 points)
Sci-IVTest Windows based control software
View Complete Details
Ask Latest Price & Details
Photovoltaic Testing System

Photovoltaic Testing System
This system includes either a 150W Xenon or 250W OTH lamp and a monochromator to tune the light source. A source meter used as an active load permits operating the test cell at various load conditions, includ- ing short-circuit, compensating for a series resistor re- quired to sense the current produced by the modulated monochromatic light. This sensed current plus a refer- ence signal at the frequency of the light modulation are both fed into the precision lock-in amplifier to allow measurement of the photocurrent generated by the modulated monochromatic light.
The PTS-1 features all the software required for l- V Curves and Spectral Response measurements. Main parameters of these measurements are displayed by the software, including the most important graphs typi- PTS Cell Testing System cally required by researchers and the industry. Option- ally, our software development group offers to develop whatever is required to meet your demands.
View Complete Details
Ask Latest Price & Details
Far Infrared Systems

Far Infrared Systems

Far-Infrared and THz radiation is the spectral region at the long wavelength end of the infrared and the short and of the microwave region. THz light is commonly used in material science, security, pharmaceutical comound analysis, biomedical imaging, superconductiong materials, astronomy and particle physics research.
Sciencetech is a poineer in THz spetroscopy, having supplied its SPS-200 Far Infrared FTIR to submillimeter wavelength research communities in astronomy and particle physics. European space agency, which used the SPS-300 to calibrate their detectors for its PlanckHerschel Mission to analyse the origins of the universe, deserve our thanks for their support in making this possible.
View Complete Details
Ask Latest Price & Details
SPS-300 FTIR Main Assembly

SPS-300 FTIR Main Assembly

The most powerful TeraHertz FTIR available in the mid and far IR Range, the SPS-300 is our second generation Martin-PuplettMichelson Interferometer designed and built at Sciencetech's own facilities in London, Canada. With a wide variety of optional upgrades and components to suit any research application, the SPS-300 has been successfully used in Material Research, Biomedical, Medical, Astronomy, Aerospace, Superconductivity, Security, Defense and a wide range of other fields by distinguished customers including the European Space Agency, the Max Planck Institute, the Argonne National Labs, The Canadian National Research Council, the Brookhaven National Lab, L'Institute d'Astrophysique Spatiale, Lawrence Berkeley National Lab, and many universities the world over.

The instrument is designed for research applications and therefore features special hardware and software designed to allow the use of samples under many different research environments (High Vacuum, High & Low Temperature, High & low Pressures, High Magnetic fields, etc.) and conduct sensitive and fast "Rapid Scans" with the mirror moving continuously as the detector collects data. Sciencetech also supports the researchers with the design and manufacturing of custom made coupling devices and sophisticated sample chambers to meet specific needs.

Please contact your authorized Sciencetech technical sales representative to discuss how we can build a FTIR designed for your technical specifications.
View Complete Details
Ask Latest Price & Details
TEO-200 Benchtop FTIR spectrometer 1cm-1 Resolution Sku: 682-9001

TEO-200 Benchtop FTIR Spectrometer 1cm-1 Resolution Sku: 682-9001

The Model TEO200 benchtop FTIR spectrometer is a low cost Fourier transform infrared spectrometer that employs a number of unique features to achieve high performance from such a compact size. At just 385x265x160mm , it is one of the most compact FTIR systems on the market today.
The TEO200 is unique in terms of its optical geometry and softwarefirmware design. The optical geometry is simplified by employing a new and remarkably compact Michelson self compensating optical system that eliminates many of the optical alignment problems found in conventional linear and pendulum type optical interferometers. For example, the TEO200 design avoids the use of conventional corner cube optics and dynamic alignment. In practical terms, the instrument can be used inside a research laboratory, or even as a mobile unit in outside environments. Its software and firmware design is also tightly coordinated which significantly reduces overall data acquisition and computational time.
The sealed, desiccated enclosure of the TEO200 eliminates the need for continuous dry nitrogen purging during operation. Other notable features include an air cooled IR source as oppose to water cooled, and the interferometer mechanical bearing does not require gas supply. There are however, three dry nitrogen gas inlets on the rear of the spectrometer for the purging of the detector compartment, sample compartment, and interferometer compartment from moisture, carbon dioxide and other gases.
Please note that there are a variety of spectral ranges available, depending on the detector-beam splitter choices for the system. The price of the system includes this beam splitter, but it must be specified.
KBr 7, 000 to 400 cm-1
ZnSe 5, 000 to 500 cm-1
CaF2 10, 000 to 1, 000 cm-1
Quartz 15, 000 to 3, 000 cm-1
View Complete Details
Ask Latest Price & Details
SSIVT-20C Current-Voltage Measurement System

SSIVT-20C Current-Voltage Measurement System

The SSIVT is an electrical current-voltage measurement system used to characterize photovoltaic cell performance. This current-voltage tester works by sampling various current versus voltage combinations of the photovoltaic cell with a variable impedence load. The performance of the photovoltaic cell is determined by measuring this output I-V relationship while it is being illuminated.
This IV Test system can measure electrical power from photovoltaic cells up to 20W. The voltage envelope has a maximum of 200V, and the current is limited to 1A. We also offer a 60W unit for measurements with continuous light sources, and several for flash systems.
Please see the technical datasheet for additional information.
Includes software, but does not include computer
The computer used with the test system must have a real RS232 port. RS232 to USB converters are not sufficient
View Complete Details
Ask Latest Price & Details
Glow Bar (Globar) Sku:

Glow Bar (Globar) Sku:
The Glow bar (Globar) is a typical infrared source for THz researcher. The heating element itself is very low cost, allowing researchers to use them without worry about replacing expensive bulbs or components. The majority of the price for this unit consists of the water cooling (required for vacuum operation), large reflector to efficiently collect the radiation, and housing designed to withstand the high level of vacuum required for THz operation.
This model is specifically designed to mount to the optional External Input Port of the SPS300. If you wish to use a completed Globar unit for your own applications, please speak with a Technical Support specialist.
Please note that this device requires water cooling to operate under vacuum and includes all the lines, but not the water recirculator itself. If purchased as part of a complete SPS300 system, it is included.
View Complete Details
Ask Latest Price & Details
SSIVT-60C Current-Voltage Measurement System

SSIVT-60C Current-Voltage Measurement System

Designed for use with continuous solar simulators
Variable resistive load
Max Electrical Power Reading: 60W
High Power Model Voltage range 60V (can be modified with additional shunt to suit application)
High Power Model Current range 3A (can be modified with additional coil to suit application)
Separate terminal interface for voltage and current measurements
Interfaces to PC via RS232 cable for display and data storage
Saves each IV curve dataset in separate ASCII text file
I-V range selectable
Number of sample points selectable (between 10-100 points)
Sci-IVTest Windows 32-bit based control software
View Complete Details
Ask Latest Price & Details
Precision Motorized Actuators

Precision Motorized Actuators
All values for lamp current of 15 mA AC
Typical Intensity 254nm @ 0.75" (mWcm2): 4400
Typical Intensity 365nm @ 0.75" (mWcm2): 145
Lamp Operative Voltage: 300
Lamp Body Temperature: 100 degrees C

53.8mm lighted length (2.12"), 117.3mm length, Quartz diameter 6.5mm (0.256")
View Complete Details
Ask Latest Price & Details
Manual Linear Stages

Manual Linear Stages

A simple lamp mount for Sciencetech's line of Cadmium and Mercury-Cadmium spectral line lamps.
Power supply not included. Sciencetech recommends the 150-9044 power supply.
This housing mount works with 650-0067 and 650-0068 lamps.
View Complete Details
Ask Latest Price & Details
Precision Rotation Stage

Precision Rotation Stage
Scientific research grade arc lamp housing
High power focused beam
Efficient ellipsoidal reflector for light collection
f/2.5 ellipsoidal reflector aperture
Supports 2500W arc lamps (xenon & mercury-xenon)
230-240VAC requirement
Forced air-cooled
Available water-cooled (please specify when ordering)
Horizontally mounted arc lamp
4.5" diameter front facing exit port
View Complete Details
Ask Latest Price & Details
Spectrographs equimpents

Spectrographs Equimpents

Our Spectroscopy division have versatile design of spectroscopy equimpents as per user application for a wavelength range of 190-5000nm with resolution of 0.001 nm to 15nm @ higher wavelengths with unique design along Single Channel(PMT) and multichannel (CCD, EMCCD) detectors. A few of systems are Raman System (Micro-Macro), Raman System with Dual and Tripple Spectrograph Configuration, UV-VIS-NIR Spectroscopy, Fluorescence and Phosphorescence Spectroscopy, Photo-corrosion system, Spectral Fiber Illuminaion System, Spectroradiometer System for Spectral Characterisation System.
A wide range of Monochromators, Detectors, Sample chamber, Echelle Spectrometer, other accessories
View Complete Details
Ask Latest Price & Details
Solar Simulation Testing Equipment

Solar Simulation Testing Equipment
Our solar simulators produce high intensity, uniform illumination on a target area for all type of Solar Cell Testing. Typically, high power solar simulators use an ellipsoidal reflector to capture light from an arc lamp source inside the reflector, an arrangement that results in a light pattern with a bright outer region and a dark center. This non-uniformity is un- acceptable in many solar simulator applications and as a result, which forces many of our solar simulator competitors to use designs involving diffusers to reduce the non-uniformity. This results in a reduction of intensity and a distortion of the spectrum on the target area overcoming to this with our unique design.
We provide Modular Systems for IV, Spectral Response, Quantum Efficiency, CPM Test Equipment for Continous Solar Simulators as well as Flash Solar Simulators, Power Meters and calibration Cells, Cell Chucks etc.
View Complete Details
Ask Latest Price & Details
Quartz Tungsten Halogen Light

Quartz Tungsten Halogen Light
The Dual Deuterium and Quartz Tungsten Halogen Light Source consists of a separate 30W deuterium light source and a 50W QTH light source in one optical assembly. The deuterium source is designed to have a hole in the middle, through which the QTH shines.
The system has a 1" output (with the combined light) with BK7 lenses.
This product includes two stabilized power supplies (to operate the two bulbs), UV to IR transmissive optics, the housing itself and reflectiverefractive optics for UV to IR transmission
Mounting Type: Horizontal
View Complete Details
Ask Latest Price & Details
Power Supply (500-IG-STD) Arc Lamp Igniter Sku: 150-9002

Power Supply (500-IG-STD) Arc Lamp Igniter Sku: 150-9002

The Sciencetech 500-200 and 550-200 Power Supplies require this mandatory 500-IG external igniter for starting arc lamps. This igniter is connected in series to the Power Supply and automatically generates a 20kV spike to ignite the arc lamp. The igniter can detect the presence of an arc lamp and will automatically ignite it once the power supply has been turned on.
This is the igniter recommended for the 200-100 & 201-100 Series Arc Lamp Housings
View Complete Details
Ask Latest Price & Details
(2400RS) Power Pack 220V Solar Simulator system

(2400RS) Power Pack 220V Solar Simulator System

This is the power supply for a Sciencetech flash Solar Simulator system. A bulb and flash head are both required but not included in this price
View Complete Details
Ask Latest Price & Details
Power Pack 110V Solar Simulator system

Power Pack 110V Solar Simulator System

This is the power supply for a Sciencetech flash Solar Simulator system. A bulb and flash head are both required but not included in this price
View Complete Details
Ask Latest Price & Details
500 6K 1600W Adjustable Power Supply

500 6K 1600W Adjustable Power Supply
The Sciencetech 500-1.6K is a variable DC power supply for Xenon (Xe) and Mercury Xenon (Hg-Xe) arc lamps from 1kW to 1.6kW. It can drive lamps with a voltage of up to 25V and currents up to 75A. This power supply can be used with an internal or external igniter (not included). This power supply is compatible with FS-02 optical feedback unit. This power supply is compatible with Sciencetech models 200-1K and 201-1K arc lamp housings.
Digital display: power in watts, current in amps, voltage in volts
Manual current adjustment
Operates as a constant current source
As the current setting is adjustable, the actual value of power, voltage or current of the lamp is shown on a LCD digital display.
Input Voltage Requirements
Please note that this power supply requires 100-240VAC input voltage with line current 12A from input voltage 115V line or line current 6A from 240V line.
Preliminary Specifications
Input Voltage: 100VAC-240VAC
Power: 1kW-1.6kW
View Complete Details
Ask Latest Price & Details
44 kW Programmable DC Stabilized Power Supply

44 KW Programmable DC Stabilized Power Supply
Programmable DC Power Supply
Power Supply Output Type:Programmable
No. of Outputs:1
Output Voltage:100V
Output Current:14.4A
Power Rating:1.4kW
Input Voltage:100V to 240V
Length:432mm
Width:420mm
Height:43.6mm
Weight:19.8lb
RoHS Compliant: NA
View Complete Details
Ask Latest Price & Details
Adjustable Current Regulated Power Supply unit

Adjustable Current Regulated Power Supply Unit
An upgraded and modern version of Sciencetech's 500-3k power supply, designed to use an intuitive and user-friendly touch screen interface. With built in functionality including a lamp timer, single-touch current control, and shutter controls (shutter sold separately), this 3.0kW power supply is appropriate for most Sciencetech 3kW arc lamps and some solar simulators.
Please speak with your authorized Sciencetech technical sales staff member to determine if this product is appropriate for your application.
View Complete Details
Ask Latest Price & Details
500-125-QTH 24VDC 250W Power Supply

500-125-QTH 24VDC 250W Power Supply
Sciencetech 500-110-QTH is an external fixed power supply for QTH lamps. Being a linear power supply as opposed to a switching power supply, it produces a highly stabilized 12VDC noise free output. This supply works with 12VDC lamps up to 100W total power. The unit accepts both 110-120VAC and 220-240VAC inputs.
View Complete Details
Ask Latest Price & Details
Model 550-200 Power Supply

Model 550-200 Power Supply

This product is now special order. Please use the 500-300 (sku:150-9044) series power supplies instead. The 550-200 series of DC power supplies are typically used to deliver power for Xenon and Mercury-Xenon lamps up to 150W. They can drive lamps with a maximum output voltage of 25V and a current of 1 - 10A. The output is adjusted manually (Support for control via a 0 - 1V program voltage to enable computer control optical feedback can be added. Ask you Sciencetech Sales Representative). A digital LCD display, located on the front panel, indicates current, voltage and power. These power supplies are fully adjustable from 5 - 10A and offer protected output against short circuit or abnormal operating conditions. Please note that this power supply does NOT include an ignitor: the 500-IG is a typical option. Please speak with your authorized Technical Sales Support staff to determine if your system requires an ignitor. Highly stable DC current output Displays the Current, Voltage and Power of the lamp Output Current Adjustable (5 to 10A) Switching power supply; low noise (80% Input Voltage: 115VAC 240VAC Input Current: 2A1A Input Frequency: 60Hz50Hz Dimensions (L x W x H): 8.5" x 13" x 5.5" (42cm x 33cm x 9cm) Weight: 7.5 kg (16.5 lbs)

View Complete Details
Ask Latest Price & Details
(500-1.56/QTH) 1.56 kW Programmable DC Stabilized Power Supply Sku: 150-9061

(500-1.56/QTH) 1.56 KW Programmable DC Stabilized Power Supply Sku: 150-9061
Programmable DC Power Supply
Power Supply Output Type:Programmable
No. of Outputs:1
Output Voltage:5-150VDC
Output Current:0.04-10.4A
Power Rating:1.560kW
Input Voltage:100V to 240V
Length:432mm
Width:420mm
Height:43.6mm
Weight:19.8lb
RoHS Compliant: YES
View Complete Details
Ask Latest Price & Details
500-150 Constant Current Adjustable Power Supply

500-150 Constant Current Adjustable Power Supply
Sciencetech's 500-150 power supply is designed to drive short xenon, and mercury-xenon arc lamps operating between 100W and 150W.

Highly stable DC current output
Displays the Current, Voltage and Power of the lamp
Output Current Adjustable (5 to 20A)
Switching power supply; low noise (80%
Input Voltage: 115VAC 240VAC
Input Current: 2A1A
Input Frequency: 60Hz50Hzv Dimensions (L x W x H): 16.5" x 13" x 3.5" (42cm x 33cm x 9cm)
Weight: 7.5 kg (16.5 lbs)
View Complete Details
Ask Latest Price & Details
(PS-1) Power Supply, +/-15 VDC Sku: 590-0006

(PS-1) Power Supply, +/-15 VDC Sku: 590-0006
The Sciencetech PS-1 is a low-noise power supply designed for powering most Sciencetech single channel detectors (except for TE-cooled and PMT detectors which use the model SCI-PS-TC-1 Power Supply), and several thermopile detectors.
Output Voltage: +- 15V Output Current: +- 100 mA
Regulation: 0.02 % line & load
Ripple: 0.5 mV RMS max output
Connections: One 9-pin Dee-plug Connector
Input Power: 120 VAC0.5 A & 240 VAC0.5A
View Complete Details
Ask Latest Price & Details
(501-1.6k) Adjustable 1.6kW power supply with touch screen interface Sku: 150-9056

(501-1.6k) Adjustable 1.6kW Power Supply With Touch Screen Interface Sku: 150-9056
Sciencetech's new power supplies use an integrated Touch Screen interface with several built in components:
1. Lamp Life timer
2. Fan safety control timer
3. Temperature controller (optional)
4. Shutter controller (optional)
View Complete Details
Ask Latest Price & Details
(500-1k) 1000W Adjustable Power Supply for Xe and HgXe Lamps Sku: 150-9005

(500-1k) 1000W Adjustable Power Supply For Xe And HgXe Lamps Sku: 150-9005
TOP
The Sciencetech 500-1K is a variable DC power supply for Xenon (Xe) and Mercury Xenon (Hg-Xe) arc lamps from 500 W to 1kW. It can drive lamps with a voltage of up to 25V and currents up to 50A. This power supply can be used with an internal or external igniter (not included). This power supply is compatible with FS-02 optical feedback unit.
This power supply is compatible with Sciencetech models 200-1K and 201-1K arc lamp housings.

Digital display: power in watts, current in amps, voltage in volts
Manual current adjustment
Operates as a constant current source
As the current setting is adjustable, the actual value of power, voltage or current of the lamp is shown on a LCD digital display.
Input Voltage Requirements
Please note that this power supply requires 100-240VAC input voltage with line current 12A from input voltage 115V line or line current 6A from 240V line.
Preliminary Specifications
Input Voltage: 100VAC-240VAC
Power: 500W-1KW
Output Current: 10A-50A

Boost Voltage: 250V
Boost Energy: 10 Joules
Ignition Voltage: >30KV (1usec rise time)
Ignition Energy: 0.5 Joules
View Complete Details
Ask Latest Price & Details
(500-1K-QTH) QTH 1000W Fixed Power Supply Sku: 150-9011

(500-1K-QTH) QTH 1000W Fixed Power Supply Sku: 150-9011
Sciencetech's 500-1K-QTH is an external 1, 000W fixed power supply for QTH lamps. Sciencetech's 1000W QTH power supply produces a highly stabilized 120VDC low noise output and can output upto 10A. The unit accepts both 110-120VAC and 220-240VAC inputs.
View Complete Details
Ask Latest Price & Details
(500-060D) Deuterium Lamp Power supply Sku: 150-9028

(500-060D) Deuterium Lamp Power Supply Sku: 150-9028
Sciencetech deuterium power supplies produce the high stability, high output, and long service life required for deuterium lamps for spectrophotometry.
A deuterium lamp uses a tungsten filament and anode placed on opposite sides of a nickel box structure designed to produce an optimal output spectrum. Unlike an incandescent bulb, the filament is not the source of light in deuterium lamps.
Instead an arc is created from the filament to the anode, a similar process to arc lamps. Because the filament must be very hot before it can operate, it is heated for approximately twenty seconds before use.
The discharge process produces its own heat, and so the heater is turned down after discharge begins. Although firing voltages are typically 600 volts, once the arc is created voltages drop to around 60-100 volts.
View Complete Details
Ask Latest Price & Details
(500-3K) Adjustable Power Supply for 2500W to 3000W Arc Lamps Sku: 150-9029

(500-3K) Adjustable Power Supply For 2500W To 3000W Arc Lamps Sku: 150-9029
Sciencetech's 500-3K adjustable power supply is designed for arc lamps (Xe and HgXe) that work in the 2.5 to 3kW range. If you are unsure if this is the correct power supply for your system, please speak with your authorized Sciencetech technical sales staff member.

Compact design
Digital display: power in watts, current in amps, voltage in volts Manual current adjustment
Operates as a constant current source
Power factor correction: >98%
Low ripple < 0.5%
Overall efficiency: >80%
Thermal overload protection
Four built-in fans for efficiency cooling
Input line frequency range: 47-63Hz
View Complete Details
Ask Latest Price & Details
75W Constant Current Power Supply Sku: 150-9041

75W Constant Current Power Supply Sku: 150-9041
This power supply has been specifically designed for the highly stable 75W Hg lamp used inside the new SPS-300 Terahertz FTIR Spectrometer. The '500-75ST' is an adjustable, current regulated, DC Power Supply. It is meant to power up a low pressure, long arc Hg lamp by Heraeus Nobelight Model 75ST. However, it can be used by many other applications which require a steady, low noise current regulated Power Supply of up to 1A, and approximately 100W. It will work with the 500-IG-75ST 800V igniter (150-9016) to ignite the Hereaus 75ST lamp.
LCD Display (Current, Voltage, Power)
Output Current Control: 0-1A
Dual line voltage: 115 230VAC
Input Current: 1A 0.5A
Input Frequency: 60Hz 50Hz
Dimensions (L x W x H): 11" x 8" x 5" (28cm x 20cm x 13cm)
Weight: 10 kg (22 lbs)
View Complete Details
Ask Latest Price & Details
(500-300) Constant Current Adjustable Power Supply, 0-300W Sku: 150-9044

(500-300) Constant Current Adjustable Power Supply, 0-300W Sku: 150-9044
Sciencetech's 500-300 power supply is designed to drive short xenon, and mercury-xenon arc lamps operating between 100W and 300W.
Highly stable DC current output
Displays the Current, Voltage and Power of the lamp
Output Current Adjustable (5 to 20A)
Switching power supply; low noise (80%
Input Voltage: 115VAC 240VAC
Input Current: 2A1A
Input Frequency: 60Hz50Hz
Dimensions (L x W x H): 16.5" x 13" x 3.5" (42cm x 33cm x 9cm)
Weight: 7.5 kg (16.5 lbs)
View Complete Details
Ask Latest Price & Details
(500-GLO) Variable DC Power Supply Sku: 150-9045

(500-GLO) Variable DC Power Supply Sku: 150-9045
This power supply is designed for use with Sciencetech's line of IR sources (including, but not limited to, the Globar, and several of our infrared emitter coils). If you are uncertain if this is the correct power supply for your system, please speak with your authorized Sciencetech technical sales staff member.
View Complete Details
Ask Latest Price & Details
501-500) 500W Adjustable Power Supply with Touch Screen Sku: 150-9050

501-500) 500W Adjustable Power Supply With Touch Screen Sku: 150-9050
Sciencetech's new standard power supply, including a touch screen interface and several useful built in components including:
1. Lamp Life timer
2. Safety fan power timer
3. Shutter controller (optional)
4. Temperature controller (optional)

This power supply is included with most Sciencetech solar simulators, arc lamps, or QTH systems automatically.
View Complete Details
Ask Latest Price & Details
(501-1k) Adjustable 1kW power supply with touch screen interface Sku: 150-9055

(501-1k) Adjustable 1kW Power Supply With Touch Screen Interface Sku: 150-9055
Sciencetech's new power supplies use an integrated Touch Screen interface with several built in components:
1. Lamp Life timer
2. Fan safety control timer
3. Temperature controller (optional)
4. Shutter controller (optional)
View Complete Details
Ask Latest Price & Details
500-IG-75ST model igniter

500-IG-75ST Model Igniter

The 500-IG-75ST model igniter is used to ignite the ST-75 Hg arc lamp. The igniter produces a conditioned 800V ignition pulse to the lamp. This igniter should be used in conjunction with the 75W Fixed power supply (150-9041) and the ST75 light source (100-9070)
View Complete Details
Ask Latest Price & Details
(201-1K-QTH) Lamp Housing Air Cooled Sku: 100-9008

(201-1K-QTH) Lamp Housing Air Cooled Sku: 100-9008

Sciencetechs 201-1K-QTH lamp housing allows for vertically mounted 500W-1500W DC operated Quartz Tungsten Halogen (QTH) filament lamps. Such lamps produce a large VIS-NIR output and some UV light. The spectral output is smooth and approximates a 3300K black body. Since each wattage lamp has its own socket style, a QTH lamp housing may only accommodate the selected wattage lamp once the socket style is specified. The unit is forced air-cooled with a blower at the top of the housing hat draws air from the bottom intake and expels it out the top of the housing. The lamp socket is mounted vertically on alignment pins such that the lamps filament can be properly centered to the housings back spherical reflector and front light exit port for optimum light output efficiency. The lamp house comes standard with an F1.5 BK7 Lens to collect light from the QTH lamp.
Please note that this product requires the bulb to be purchased separately and included in the quotation as a separate line item. Please contact your authorized Sciencetech technical sales staff member for any questions.
View Complete Details
Ask Latest Price & Details
100W QTH Fiber Optic Illuminator Sku: 100-9072

100W QTH Fiber Optic Illuminator Sku: 100-9072

Illuminates Fiber Bundles up to 13mm diameter
Visible Light Fiber Illuminator with built-in IR filter
100 W QTH lamp with integrated dichroic ellipsoidal reflector
Dichroic cold mirror and heat dump to eliminate infrared light
Collimating and condensing optics into a fiber
Filter drawer for interference filters
Regulated adjustable 100W DC power supply
Operation at 230VAC@50Hz or 120VAC@60Hz
View Complete Details
Ask Latest Price & Details
Broadband THz Mercury Arc Light Source Housing (for ST75 series lamps) Sku: 100-9070

Broadband THz Mercury Arc Light Source Housing (for ST75 Series Lamps) Sku: 100-9070

The 100-9070 Broadband THz Mercury Arc Light Source housing is designed specifically for the SPS-300 series FTIRs, and as an upgrade to existing SPS-200 systems in need of a more stable and modern source.
Please note that this does not include power supply or igniter (150-9016 and 150-9041) which are required for operation. Additionally, if the lamp is going to be operated in a vacuum, it will need a water recirculator for cooling.
This product includes the housing and a single bulb. Additional replacement 75W Mercury bulbs are available at additional charge.
View Complete Details
Ask Latest Price & Details
Glow Bar (Globar) - Including housing, Reflector,

Glow Bar (Globar) - Including Housing, Reflector,

The Glow bar (Globar) is a typical infrared source for THz researcher. The heating element itself is very low cost, allowing researchers to use them without worry about replacing expensive bulbs or components. The majority of the price for this unit consists of the water cooling (required for vacuum operation), large reflector to efficiently collect the radiation, and housing designed to withstand the high level of vacuum required for THz operation.
This model is specifically designed to mount to the optional External Input Port of the SPS300. If you wish to use a completed Globar unit for your own applications, please speak with a Technical Support specialist.
Please note that this device requires water cooling to operate under vacuum and includes all the lines, but not the water recirculator itself. If purchased as part of a complete SPS300 system, it is included.
View Complete Details
Ask Latest Price & Details
Sample Chamber for FTIR SPS-300

Sample Chamber For FTIR SPS-300

This Sample Chamber will operate at either 77K or at room temperature, but does not include any mechanism to regulate the temperature between those points.
It requires a supply of liquid nitrogen in order to operate (sold separately).
View Complete Details
Ask Latest Price & Details
SPS403 Sample Chamber

SPS403 Sample Chamber

This is an external transmission and reflectance sample chamber that can be mated to an output port of the SPS-series FTIRs. This sample chamber allows small samples (such as cuvettes or thin films) to be studied in both reflection and transmission. The sample chamber shares the vacuum environment with the FTIR, but an optional window or vacuum gate (sold separately) allows the chamber to be isolated from the FTIR. The sample chamber utilizes reflective aspheric optics with gold coating for excellent far infrared and terahertz operation.
View Complete Details
Ask Latest Price & Details
SPS-300 Sample Chamber

SPS-300 Sample Chamber

This external transmissionreflectance sample chamber can be mated to the output port of a Sciencetech FTIR system. This chamber allows small samples to be studied in both transmission and reflectance modes, at temperatures ranging from approximately -20 Celsius to room temperature. The sample chamber utilizes gold coated aspheric optics for excellent signal in the infrared and terahertz region.
View Complete Details
Ask Latest Price & Details
Arc Lamp Igniter

Arc Lamp Igniter

The 500-IG-75ST model igniter is used to ignite the ST-75 Hg arc lamp. The igniter produces a conditioned 800V ignition pulse to the lamp. This igniter should be used in conjunction with the 75W Fixed power supply (150-9041) and the ST75 light source (100-9070)
View Complete Details
Ask Latest Price & Details
Adjustable 1kW power supply with touch screen interface Sku: 150-9055

Adjustable 1kW Power Supply With Touch Screen Interface Sku: 150-9055
Sciencetech's new power supplies use an integrated Touch Screen interface with several built in components:
1. Lamp Life timer
2. Fan safety control timer
3. Temperature controller (optional)
4. Shutter controller (optional)
View Complete Details
Ask Latest Price & Details
Constant Current Adjustable Power Supply, 0-300W Sku: 150-9044

Constant Current Adjustable Power Supply, 0-300W Sku: 150-9044
Sciencetech's 500-300 power supply is designed to drive short xenon, and mercury-xenon arc lamps operating between 100W and 300W.
Highly stable DC current output
Displays the Current, Voltage and Power of the lamp
Output Current Adjustable (5 to 20A)
Switching power supply; low noise (80%
Input Voltage: 115VAC 240VAC
Input Current: 2A1A
Input Frequency: 60Hz50Hz
Dimensions (L x W x H): 16.5" x 13" x 3.5" (42cm x 33cm x 9cm)
Weight: 7.5 kg (16.5 lbs)
View Complete Details
Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Sandeep Yadav (Deep Photonics Instrumentation)
  • Plot No. 1054-18, Railway Road, hisar, Haryana - 125033, India
  • Share us via
    Linkedin pinterest
  • Call 08069182174 Ext. 745
List of Other Products by Deep Photonics Instrumentation from hisar, Haryana.
Product / Services
Post Buy Requirement
DP
Deep Photonics Instrumentation
hisar, Haryana, India
Verified Add Review
Call 08069182174 Ext. 745

Our Products

  1. Lamps 4 Products available
  2. Cabinets & Enclosures 26 Products available
  3. Filters 10 Products available
  4. Others 68 Products available

Other Products / Services #4533594

Calibration Light Sources

Calibration Light Sources

Calibration Light Sources are consisting of NIST traceable calibrated lamps that are reliable sources of spectral irradiance in the UV to NIR. We provide various sources for, excitation, illumination as well as both spectrometer wavelength calibration sources and radio-metrically calibrated sources. One can use a calibration light source to calibrate your own irradiance source, or to transfer our NIST traceable calibration to a spectroscopic detection system. To achieve the highest accuracy, we suggest you to use a spectral line lamp for wavelength calibration and for power level calibration this calibrated irradiance lamp with a stabilized, radiometric power supply.Calibration Light Sources are consisting of NIST traceable calibrated lamps that are reliable sources of spectral irradiance in the UV to NIR. We provide various sources for, excitation, illumination as well as both spectrometer wavelength calibration sources and radio-metrically calibrated sources. One can use a calibration light source to calibrate your own irradiance source, or to transfer our NIST traceable calibration to a spectroscopic detection system. To achieve the highest accuracy, we suggest you to use a spectral line lamp for wavelength calibration and for power level calibration this calibrated irradiance lamp with a stabilized, radiometric power supply.
View Complete Details
Ask Latest Price & Details
166-9010 Load Booster System

166-9010 Load Booster System

Voltage Range: 200V Current Range: 20A Sciencetech's Load Boost System is designed for short term loading of high output, flashed solar panels or other pulsed power sources when interfaced with, and controlled by, Keithley 2400 source meters. This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The BI200 Load Booster allows our IV testing system to measure up to 20A up to the full 200V range of the Keithley. This increases the range of use of Sciencetech's IV Test systems, to allow testing of high voltage or high current solar panels.
View Complete Details
Ask Latest Price & Details
SSIVT-1KF) Current-Voltage Measurement System

SSIVT-1KF) Current-Voltage Measurement System

The SSIVT is an electrical current-voltage measurement system used to characterize photovoltaic cell performance. This current-voltage tester works by sampling various currents versus specific voltage combinations of the photovoltaic cell with a variable impedence load.The voltage envelope is limited to 100V and the current is limited to 10A. For other maximum values of voltage or current, please speak with a technical sales staff member.For further technical information, please see the technical datasheet.
View Complete Details
Ask Latest Price & Details
SSIVT-20F Current-Voltage Measurement System

SSIVT-20F Current-Voltage Measurement System

Sciencetech's IV Testers are electrical current-voltage measurement systems used to characterize photovoltaic cell performance. This current-voltage tester works by sampling various current versus voltage combinations of the photovoltaic cell with a variable impedence load. This IV Test system can measure electrical power from photovoltaic cells up to 20W. The voltage envelope is limited to 20V and the current to 1A. A higher power version, up to 60W, is available.In general, the limitation on this model is the 1A current limit: if your solar cell generates more than 1A, we recommend upgrading to the 60W version.
View Complete Details
Ask Latest Price & Details
SSIVT-60F Current-Voltage Measurement System

SSIVT-60F Current-Voltage Measurement System

Designed for use with continuous or pulse solar simulatorsAn output trigger TTL signal is used to synchronize its data acquisition with pulse solar simulators Variable resistive loadMax Electrical Power Reading: 20W base model, 60W high power modelBase Model Voltage range 200V (can be modified with additional shunt to suit application)Base Model Current range 1A (can be modified with additional coil to suit application)High Power Model Voltage range 60V (can be modified with additional shunt to suit application)High Power Model Current range 3A (can be modified with additional coil to suit application)Separate terminal interface for voltage and current measurementsInterfaces to PC via RS232Saves each IV curve dataset in separate ASCII text fileI-V range selectableNumber of sample points selectable (between 10-100 points)Sci-IVTest Windows based control software
View Complete Details
Ask Latest Price & Details
Photovoltaic Testing System

Photovoltaic Testing System
This system includes either a 150W Xenon or 250W OTH lamp and a monochromator to tune the light source. A source meter used as an active load permits operating the test cell at various load conditions, includ- ing short-circuit, compensating for a series resistor re- quired to sense the current produced by the modulated monochromatic light. This sensed current plus a refer- ence signal at the frequency of the light modulation are both fed into the precision lock-in amplifier to allow measurement of the photocurrent generated by the modulated monochromatic light.The PTS-1 features all the software required for l- V Curves and Spectral Response measurements. Main parameters of these measurements are displayed by the software, including the most important graphs typi- PTS Cell Testing System cally required by researchers and the industry. Option- ally, our software development group offers to develop whatever is required to meet your demands.
View Complete Details
Ask Latest Price & Details
Far Infrared Systems

Far Infrared Systems

Far-Infrared and THz radiation is the spectral region at the long wavelength end of the infrared and the short and of the microwave region. THz light is commonly used in material science, security, pharmaceutical comound analysis, biomedical imaging, superconductiong materials, astronomy and particle physics research. Sciencetech is a poineer in THz spetroscopy, having supplied its SPS-200 Far Infrared FTIR to submillimeter wavelength research communities in astronomy and particle physics. European space agency, which used the SPS-300 to calibrate their detectors for its PlanckHerschel Mission to analyse the origins of the universe, deserve our thanks for their support in making this possible.
View Complete Details
Ask Latest Price & Details
SPS-300 FTIR Main Assembly

SPS-300 FTIR Main Assembly

The most powerful TeraHertz FTIR available in the mid and far IR Range, the SPS-300 is our second generation Martin-PuplettMichelson Interferometer designed and built at Sciencetech's own facilities in London, Canada. With a wide variety of optional upgrades and components to suit any research application, the SPS-300 has been successfully used in Material Research, Biomedical, Medical, Astronomy, Aerospace, Superconductivity, Security, Defense and a wide range of other fields by distinguished customers including the European Space Agency, the Max Planck Institute, the Argonne National Labs, The Canadian National Research Council, the Brookhaven National Lab, L'Institute d'Astrophysique Spatiale, Lawrence Berkeley National Lab, and many universities the world over. The instrument is designed for research applications and therefore features special hardware and software designed to allow the use of samples under many different research environments (High Vacuum, High & Low Temperature, High & low Pressures, High Magnetic fields, etc.) and conduct sensitive and fast "Rapid Scans" with the mirror moving continuously as the detector collects data. Sciencetech also supports the researchers with the design and manufacturing of custom made coupling devices and sophisticated sample chambers to meet specific needs. Please contact your authorized Sciencetech technical sales representative to discuss how we can build a FTIR designed for your technical specifications.
View Complete Details
Ask Latest Price & Details
TEO-200 Benchtop FTIR spectrometer 1cm-1 Resolution Sku: 682-9001

TEO-200 Benchtop FTIR Spectrometer 1cm-1 Resolution Sku: 682-9001

The Model TEO200 benchtop FTIR spectrometer is a low cost Fourier transform infrared spectrometer that employs a number of unique features to achieve high performance from such a compact size. At just 385x265x160mm , it is one of the most compact FTIR systems on the market today.The TEO200 is unique in terms of its optical geometry and softwarefirmware design. The optical geometry is simplified by employing a new and remarkably compact Michelson self compensating optical system that eliminates many of the optical alignment problems found in conventional linear and pendulum type optical interferometers. For example, the TEO200 design avoids the use of conventional corner cube optics and dynamic alignment. In practical terms, the instrument can be used inside a research laboratory, or even as a mobile unit in outside environments. Its software and firmware design is also tightly coordinated which significantly reduces overall data acquisition and computational time.The sealed, desiccated enclosure of the TEO200 eliminates the need for continuous dry nitrogen purging during operation. Other notable features include an air cooled IR source as oppose to water cooled, and the interferometer mechanical bearing does not require gas supply. There are however, three dry nitrogen gas inlets on the rear of the spectrometer for the purging of the detector compartment, sample compartment, and interferometer compartment from moisture, carbon dioxide and other gases.Please note that there are a variety of spectral ranges available, depending on the detector-beam splitter choices for the system. The price of the system includes this beam splitter, but it must be specified.KBr 7, 000 to 400 cm-1ZnSe 5, 000 to 500 cm-1CaF2 10, 000 to 1, 000 cm-1Quartz 15, 000 to 3, 000 cm-1
View Complete Details
Ask Latest Price & Details
SSIVT-20C Current-Voltage Measurement System

SSIVT-20C Current-Voltage Measurement System

The SSIVT is an electrical current-voltage measurement system used to characterize photovoltaic cell performance. This current-voltage tester works by sampling various current versus voltage combinations of the photovoltaic cell with a variable impedence load. The performance of the photovoltaic cell is determined by measuring this output I-V relationship while it is being illuminated. This IV Test system can measure electrical power from photovoltaic cells up to 20W. The voltage envelope has a maximum of 200V, and the current is limited to 1A. We also offer a 60W unit for measurements with continuous light sources, and several for flash systems. Please see the technical datasheet for additional information.Includes software, but does not include computerThe computer used with the test system must have a real RS232 port. RS232 to USB converters are not sufficient
View Complete Details
Ask Latest Price & Details
Glow Bar (Globar) Sku:

Glow Bar (Globar) Sku:
The Glow bar (Globar) is a typical infrared source for THz researcher. The heating element itself is very low cost, allowing researchers to use them without worry about replacing expensive bulbs or components. The majority of the price for this unit consists of the water cooling (required for vacuum operation), large reflector to efficiently collect the radiation, and housing designed to withstand the high level of vacuum required for THz operation.This model is specifically designed to mount to the optional External Input Port of the SPS300. If you wish to use a completed Globar unit for your own applications, please speak with a Technical Support specialist.Please note that this device requires water cooling to operate under vacuum and includes all the lines, but not the water recirculator itself. If purchased as part of a complete SPS300 system, it is included.
View Complete Details
Ask Latest Price & Details
SSIVT-60C Current-Voltage Measurement System

SSIVT-60C Current-Voltage Measurement System

Designed for use with continuous solar simulatorsVariable resistive loadMax Electrical Power Reading: 60WHigh Power Model Voltage range 60V (can be modified with additional shunt to suit application)High Power Model Current range 3A (can be modified with additional coil to suit application)Separate terminal interface for voltage and current measurementsInterfaces to PC via RS232 cable for display and data storageSaves each IV curve dataset in separate ASCII text fileI-V range selectableNumber of sample points selectable (between 10-100 points)Sci-IVTest Windows 32-bit based control software
View Complete Details
Ask Latest Price & Details
Precision Motorized Actuators

Precision Motorized Actuators
All values for lamp current of 15 mA ACTypical Intensity 254nm @ 0.75" (mWcm2): 4400Typical Intensity 365nm @ 0.75" (mWcm2): 145Lamp Operative Voltage: 300Lamp Body Temperature: 100 degrees C 53.8mm lighted length (2.12"), 117.3mm length, Quartz diameter 6.5mm (0.256")
View Complete Details
Ask Latest Price & Details
Manual Linear Stages

Manual Linear Stages

A simple lamp mount for Sciencetech's line of Cadmium and Mercury-Cadmium spectral line lamps. Power supply not included. Sciencetech recommends the 150-9044 power supply.This housing mount works with 650-0067 and 650-0068 lamps.
View Complete Details
Ask Latest Price & Details
Precision Rotation Stage

Precision Rotation Stage
Scientific research grade arc lamp housingHigh power focused beamEfficient ellipsoidal reflector for light collectionf/2.5 ellipsoidal reflector apertureSupports 2500W arc lamps (xenon & mercury-xenon)230-240VAC requirementForced air-cooledAvailable water-cooled (please specify when ordering)Horizontally mounted arc lamp4.5" diameter front facing exit port
View Complete Details
Ask Latest Price & Details
Spectrographs equimpents

Spectrographs Equimpents

Our Spectroscopy division have versatile design of spectroscopy equimpents as per user application for a wavelength range of 190-5000nm with resolution of 0.001 nm to 15nm @ higher wavelengths with unique design along Single Channel(PMT) and multichannel (CCD, EMCCD) detectors. A few of systems are Raman System (Micro-Macro), Raman System with Dual and Tripple Spectrograph Configuration, UV-VIS-NIR Spectroscopy, Fluorescence and Phosphorescence Spectroscopy, Photo-corrosion system, Spectral Fiber Illuminaion System, Spectroradiometer System for Spectral Characterisation System. A wide range of Monochromators, Detectors, Sample chamber, Echelle Spectrometer, other accessories
View Complete Details
Ask Latest Price & Details
Solar Simulation Testing Equipment

Solar Simulation Testing Equipment
Our solar simulators produce high intensity, uniform illumination on a target area for all type of Solar Cell Testing. Typically, high power solar simulators use an ellipsoidal reflector to capture light from an arc lamp source inside the reflector, an arrangement that results in a light pattern with a bright outer region and a dark center. This non-uniformity is un- acceptable in many solar simulator applications and as a result, which forces many of our solar simulator competitors to use designs involving diffusers to reduce the non-uniformity. This results in a reduction of intensity and a distortion of the spectrum on the target area overcoming to this with our unique design. We provide Modular Systems for IV, Spectral Response, Quantum Efficiency, CPM Test Equipment for Continous Solar Simulators as well as Flash Solar Simulators, Power Meters and calibration Cells, Cell Chucks etc.
View Complete Details
Ask Latest Price & Details
Quartz Tungsten Halogen Light

Quartz Tungsten Halogen Light
The Dual Deuterium and Quartz Tungsten Halogen Light Source consists of a separate 30W deuterium light source and a 50W QTH light source in one optical assembly. The deuterium source is designed to have a hole in the middle, through which the QTH shines. The system has a 1" output (with the combined light) with BK7 lenses.This product includes two stabilized power supplies (to operate the two bulbs), UV to IR transmissive optics, the housing itself and reflectiverefractive optics for UV to IR transmissionMounting Type: Horizontal
View Complete Details
Ask Latest Price & Details
Power Supply (500-IG-STD) Arc Lamp Igniter Sku: 150-9002

Power Supply (500-IG-STD) Arc Lamp Igniter Sku: 150-9002

The Sciencetech 500-200 and 550-200 Power Supplies require this mandatory 500-IG external igniter for starting arc lamps. This igniter is connected in series to the Power Supply and automatically generates a 20kV spike to ignite the arc lamp. The igniter can detect the presence of an arc lamp and will automatically ignite it once the power supply has been turned on.This is the igniter recommended for the 200-100 & 201-100 Series Arc Lamp Housings
View Complete Details
Ask Latest Price & Details
(2400RS) Power Pack 220V Solar Simulator system

(2400RS) Power Pack 220V Solar Simulator System

This is the power supply for a Sciencetech flash Solar Simulator system. A bulb and flash head are both required but not included in this price
View Complete Details
Ask Latest Price & Details
Power Pack 110V Solar Simulator system

Power Pack 110V Solar Simulator System

This is the power supply for a Sciencetech flash Solar Simulator system. A bulb and flash head are both required but not included in this price
View Complete Details
Ask Latest Price & Details
500 6K 1600W Adjustable Power Supply

500 6K 1600W Adjustable Power Supply
The Sciencetech 500-1.6K is a variable DC power supply for Xenon (Xe) and Mercury Xenon (Hg-Xe) arc lamps from 1kW to 1.6kW. It can drive lamps with a voltage of up to 25V and currents up to 75A. This power supply can be used with an internal or external igniter (not included). This power supply is compatible with FS-02 optical feedback unit. This power supply is compatible with Sciencetech models 200-1K and 201-1K arc lamp housings. Digital display: power in watts, current in amps, voltage in voltsManual current adjustmentOperates as a constant current sourceAs the current setting is adjustable, the actual value of power, voltage or current of the lamp is shown on a LCD digital display.Input Voltage RequirementsPlease note that this power supply requires 100-240VAC input voltage with line current 12A from input voltage 115V line or line current 6A from 240V line.Preliminary SpecificationsInput Voltage: 100VAC-240VACPower: 1kW-1.6kW
View Complete Details
Ask Latest Price & Details
44 kW Programmable DC Stabilized Power Supply

44 KW Programmable DC Stabilized Power Supply
Programmable DC Power SupplyPower Supply Output Type:ProgrammableNo. of Outputs:1Output Voltage:100VOutput Current:14.4APower Rating:1.4kWInput Voltage:100V to 240VLength:432mmWidth:420mmHeight:43.6mmWeight:19.8lbRoHS Compliant: NA
View Complete Details
Ask Latest Price & Details
Adjustable Current Regulated Power Supply unit

Adjustable Current Regulated Power Supply Unit
An upgraded and modern version of Sciencetech's 500-3k power supply, designed to use an intuitive and user-friendly touch screen interface. With built in functionality including a lamp timer, single-touch current control, and shutter controls (shutter sold separately), this 3.0kW power supply is appropriate for most Sciencetech 3kW arc lamps and some solar simulators.Please speak with your authorized Sciencetech technical sales staff member to determine if this product is appropriate for your application.
View Complete Details
Ask Latest Price & Details
500-125-QTH 24VDC 250W Power Supply

500-125-QTH 24VDC 250W Power Supply
Sciencetech 500-110-QTH is an external fixed power supply for QTH lamps. Being a linear power supply as opposed to a switching power supply, it produces a highly stabilized 12VDC noise free output. This supply works with 12VDC lamps up to 100W total power. The unit accepts both 110-120VAC and 220-240VAC inputs.
View Complete Details
Ask Latest Price & Details
Model 550-200 Power Supply

Model 550-200 Power Supply

This product is now special order. Please use the 500-300 (sku:150-9044) series power supplies instead. The 550-200 series of DC power supplies are typically used to deliver power for Xenon and Mercury-Xenon lamps up to 150W. They can drive lamps with a maximum output voltage of 25V and a current of 1 - 10A. The output is adjusted manually (Support for control via a 0 - 1V program voltage to enable computer control optical feedback can be added. Ask you Sciencetech Sales Representative). A digital LCD display, located on the front panel, indicates current, voltage and power. These power supplies are fully adjustable from 5 - 10A and offer protected output against short circuit or abnormal operating conditions. Please note that this power supply does NOT include an ignitor: the 500-IG is a typical option. Please speak with your authorized Technical Sales Support staff to determine if your system requires an ignitor. Highly stable DC current output Displays the Current, Voltage and Power of the lamp Output Current Adjustable (5 to 10A) Switching power supply; low noise (80% Input Voltage: 115VAC 240VAC Input Current: 2A1A Input Frequency: 60Hz50Hz Dimensions (L x W x H): 8.5" x 13" x 5.5" (42cm x 33cm x 9cm) Weight: 7.5 kg (16.5 lbs)

View Complete Details
Ask Latest Price & Details
(500-1.56/QTH) 1.56 kW Programmable DC Stabilized Power Supply Sku: 150-9061

(500-1.56/QTH) 1.56 KW Programmable DC Stabilized Power Supply Sku: 150-9061
Programmable DC Power SupplyPower Supply Output Type:ProgrammableNo. of Outputs:1Output Voltage:5-150VDCOutput Current:0.04-10.4APower Rating:1.560kWInput Voltage:100V to 240VLength:432mmWidth:420mmHeight:43.6mmWeight:19.8lbRoHS Compliant: YES
View Complete Details
Ask Latest Price & Details
500-150 Constant Current Adjustable Power Supply

500-150 Constant Current Adjustable Power Supply
Sciencetech's 500-150 power supply is designed to drive short xenon, and mercury-xenon arc lamps operating between 100W and 150W. Highly stable DC current outputDisplays the Current, Voltage and Power of the lampOutput Current Adjustable (5 to 20A)Switching power supply; low noise (80%Input Voltage: 115VAC 240VACInput Current: 2A1AInput Frequency: 60Hz50Hzv Dimensions (L x W x H): 16.5" x 13" x 3.5" (42cm x 33cm x 9cm)Weight: 7.5 kg (16.5 lbs)
View Complete Details
Ask Latest Price & Details
(PS-1) Power Supply, +/-15 VDC Sku: 590-0006

(PS-1) Power Supply, +/-15 VDC Sku: 590-0006
The Sciencetech PS-1 is a low-noise power supply designed for powering most Sciencetech single channel detectors (except for TE-cooled and PMT detectors which use the model SCI-PS-TC-1 Power Supply), and several thermopile detectors.Output Voltage: +- 15V Output Current: +- 100 mARegulation: 0.02 % line & loadRipple: 0.5 mV RMS max outputConnections: One 9-pin Dee-plug ConnectorInput Power: 120 VAC0.5 A & 240 VAC0.5A
View Complete Details
Ask Latest Price & Details
(501-1.6k) Adjustable 1.6kW power supply with touch screen interface Sku: 150-9056

(501-1.6k) Adjustable 1.6kW Power Supply With Touch Screen Interface Sku: 150-9056
Sciencetech's new power supplies use an integrated Touch Screen interface with several built in components:1. Lamp Life timer2. Fan safety control timer3. Temperature controller (optional)4. Shutter controller (optional)
View Complete Details
Ask Latest Price & Details
(500-1k) 1000W Adjustable Power Supply for Xe and HgXe Lamps Sku: 150-9005

(500-1k) 1000W Adjustable Power Supply For Xe And HgXe Lamps Sku: 150-9005
TOPThe Sciencetech 500-1K is a variable DC power supply for Xenon (Xe) and Mercury Xenon (Hg-Xe) arc lamps from 500 W to 1kW. It can drive lamps with a voltage of up to 25V and currents up to 50A. This power supply can be used with an internal or external igniter (not included). This power supply is compatible with FS-02 optical feedback unit.This power supply is compatible with Sciencetech models 200-1K and 201-1K arc lamp housings. Digital display: power in watts, current in amps, voltage in voltsManual current adjustmentOperates as a constant current source As the current setting is adjustable, the actual value of power, voltage or current of the lamp is shown on a LCD digital display.Input Voltage RequirementsPlease note that this power supply requires 100-240VAC input voltage with line current 12A from input voltage 115V line or line current 6A from 240V line.Preliminary SpecificationsInput Voltage: 100VAC-240VACPower: 500W-1KWOutput Current: 10A-50A Boost Voltage: 250VBoost Energy: 10 JoulesIgnition Voltage: >30KV (1usec rise time)Ignition Energy: 0.5 Joules
View Complete Details
Ask Latest Price & Details
(500-1K-QTH) QTH 1000W Fixed Power Supply Sku: 150-9011

(500-1K-QTH) QTH 1000W Fixed Power Supply Sku: 150-9011
Sciencetech's 500-1K-QTH is an external 1, 000W fixed power supply for QTH lamps. Sciencetech's 1000W QTH power supply produces a highly stabilized 120VDC low noise output and can output upto 10A. The unit accepts both 110-120VAC and 220-240VAC inputs.
View Complete Details
Ask Latest Price & Details
(500-060D) Deuterium Lamp Power supply Sku: 150-9028

(500-060D) Deuterium Lamp Power Supply Sku: 150-9028
Sciencetech deuterium power supplies produce the high stability, high output, and long service life required for deuterium lamps for spectrophotometry.A deuterium lamp uses a tungsten filament and anode placed on opposite sides of a nickel box structure designed to produce an optimal output spectrum. Unlike an incandescent bulb, the filament is not the source of light in deuterium lamps.Instead an arc is created from the filament to the anode, a similar process to arc lamps. Because the filament must be very hot before it can operate, it is heated for approximately twenty seconds before use.The discharge process produces its own heat, and so the heater is turned down after discharge begins. Although firing voltages are typically 600 volts, once the arc is created voltages drop to around 60-100 volts.
View Complete Details
Ask Latest Price & Details
(500-3K) Adjustable Power Supply for 2500W to 3000W Arc Lamps Sku: 150-9029

(500-3K) Adjustable Power Supply For 2500W To 3000W Arc Lamps Sku: 150-9029
Sciencetech's 500-3K adjustable power supply is designed for arc lamps (Xe and HgXe) that work in the 2.5 to 3kW range. If you are unsure if this is the correct power supply for your system, please speak with your authorized Sciencetech technical sales staff member. Compact designDigital display: power in watts, current in amps, voltage in volts Manual current adjustmentOperates as a constant current sourcePower factor correction: >98%Low ripple < 0.5%Overall efficiency: >80%Thermal overload protectionFour built-in fans for efficiency coolingInput line frequency range: 47-63Hz
View Complete Details
Ask Latest Price & Details
75W Constant Current Power Supply Sku: 150-9041

75W Constant Current Power Supply Sku: 150-9041
This power supply has been specifically designed for the highly stable 75W Hg lamp used inside the new SPS-300 Terahertz FTIR Spectrometer. The '500-75ST' is an adjustable, current regulated, DC Power Supply. It is meant to power up a low pressure, long arc Hg lamp by Heraeus Nobelight Model 75ST. However, it can be used by many other applications which require a steady, low noise current regulated Power Supply of up to 1A, and approximately 100W. It will work with the 500-IG-75ST 800V igniter (150-9016) to ignite the Hereaus 75ST lamp.LCD Display (Current, Voltage, Power)Output Current Control: 0-1A Dual line voltage: 115 230VACInput Current: 1A 0.5AInput Frequency: 60Hz 50HzDimensions (L x W x H): 11" x 8" x 5" (28cm x 20cm x 13cm)Weight: 10 kg (22 lbs)
View Complete Details
Ask Latest Price & Details
(500-300) Constant Current Adjustable Power Supply, 0-300W Sku: 150-9044

(500-300) Constant Current Adjustable Power Supply, 0-300W Sku: 150-9044
Sciencetech's 500-300 power supply is designed to drive short xenon, and mercury-xenon arc lamps operating between 100W and 300W. Highly stable DC current outputDisplays the Current, Voltage and Power of the lampOutput Current Adjustable (5 to 20A)Switching power supply; low noise (80%Input Voltage: 115VAC 240VACInput Current: 2A1AInput Frequency: 60Hz50HzDimensions (L x W x H): 16.5" x 13" x 3.5" (42cm x 33cm x 9cm)Weight: 7.5 kg (16.5 lbs)
View Complete Details
Ask Latest Price & Details
(500-GLO) Variable DC Power Supply Sku: 150-9045

(500-GLO) Variable DC Power Supply Sku: 150-9045
This power supply is designed for use with Sciencetech's line of IR sources (including, but not limited to, the Globar, and several of our infrared emitter coils). If you are uncertain if this is the correct power supply for your system, please speak with your authorized Sciencetech technical sales staff member.
View Complete Details
Ask Latest Price & Details
501-500) 500W Adjustable Power Supply with Touch Screen Sku: 150-9050

501-500) 500W Adjustable Power Supply With Touch Screen Sku: 150-9050
Sciencetech's new standard power supply, including a touch screen interface and several useful built in components including:1. Lamp Life timer2. Safety fan power timer3. Shutter controller (optional)4. Temperature controller (optional) This power supply is included with most Sciencetech solar simulators, arc lamps, or QTH systems automatically.
View Complete Details
Ask Latest Price & Details
(501-1k) Adjustable 1kW power supply with touch screen interface Sku: 150-9055

(501-1k) Adjustable 1kW Power Supply With Touch Screen Interface Sku: 150-9055
Sciencetech's new power supplies use an integrated Touch Screen interface with several built in components:1. Lamp Life timer2. Fan safety control timer3. Temperature controller (optional)4. Shutter controller (optional)
View Complete Details
Ask Latest Price & Details
500-IG-75ST model igniter

500-IG-75ST Model Igniter

The 500-IG-75ST model igniter is used to ignite the ST-75 Hg arc lamp. The igniter produces a conditioned 800V ignition pulse to the lamp. This igniter should be used in conjunction with the 75W Fixed power supply (150-9041) and the ST75 light source (100-9070)
View Complete Details
Ask Latest Price & Details
(201-1K-QTH) Lamp Housing Air Cooled Sku: 100-9008

(201-1K-QTH) Lamp Housing Air Cooled Sku: 100-9008

Sciencetechs 201-1K-QTH lamp housing allows for vertically mounted 500W-1500W DC operated Quartz Tungsten Halogen (QTH) filament lamps. Such lamps produce a large VIS-NIR output and some UV light. The spectral output is smooth and approximates a 3300K black body. Since each wattage lamp has its own socket style, a QTH lamp housing may only accommodate the selected wattage lamp once the socket style is specified. The unit is forced air-cooled with a blower at the top of the housing hat draws air from the bottom intake and expels it out the top of the housing. The lamp socket is mounted vertically on alignment pins such that the lamps filament can be properly centered to the housings back spherical reflector and front light exit port for optimum light output efficiency. The lamp house comes standard with an F1.5 BK7 Lens to collect light from the QTH lamp. Please note that this product requires the bulb to be purchased separately and included in the quotation as a separate line item. Please contact your authorized Sciencetech technical sales staff member for any questions.
View Complete Details
Ask Latest Price & Details
100W QTH Fiber Optic Illuminator Sku: 100-9072

100W QTH Fiber Optic Illuminator Sku: 100-9072

Illuminates Fiber Bundles up to 13mm diameterVisible Light Fiber Illuminator with built-in IR filter100 W QTH lamp with integrated dichroic ellipsoidal reflectorDichroic cold mirror and heat dump to eliminate infrared lightCollimating and condensing optics into a fiberFilter drawer for interference filtersRegulated adjustable 100W DC power supplyOperation at 230VAC@50Hz or 120VAC@60Hz
View Complete Details
Ask Latest Price & Details
Broadband THz Mercury Arc Light Source Housing (for ST75 series lamps) Sku: 100-9070

Broadband THz Mercury Arc Light Source Housing (for ST75 Series Lamps) Sku: 100-9070

The 100-9070 Broadband THz Mercury Arc Light Source housing is designed specifically for the SPS-300 series FTIRs, and as an upgrade to existing SPS-200 systems in need of a more stable and modern source. Please note that this does not include power supply or igniter (150-9016 and 150-9041) which are required for operation. Additionally, if the lamp is going to be operated in a vacuum, it will need a water recirculator for cooling.This product includes the housing and a single bulb. Additional replacement 75W Mercury bulbs are available at additional charge.
View Complete Details
Ask Latest Price & Details
Glow Bar (Globar) - Including housing, Reflector,

Glow Bar (Globar) - Including Housing, Reflector,

The Glow bar (Globar) is a typical infrared source for THz researcher. The heating element itself is very low cost, allowing researchers to use them without worry about replacing expensive bulbs or components. The majority of the price for this unit consists of the water cooling (required for vacuum operation), large reflector to efficiently collect the radiation, and housing designed to withstand the high level of vacuum required for THz operation.This model is specifically designed to mount to the optional External Input Port of the SPS300. If you wish to use a completed Globar unit for your own applications, please speak with a Technical Support specialist.Please note that this device requires water cooling to operate under vacuum and includes all the lines, but not the water recirculator itself. If purchased as part of a complete SPS300 system, it is included.
View Complete Details
Ask Latest Price & Details
Sample Chamber for FTIR SPS-300

Sample Chamber For FTIR SPS-300

This Sample Chamber will operate at either 77K or at room temperature, but does not include any mechanism to regulate the temperature between those points.It requires a supply of liquid nitrogen in order to operate (sold separately).
View Complete Details
Ask Latest Price & Details
SPS403 Sample Chamber

SPS403 Sample Chamber

This is an external transmission and reflectance sample chamber that can be mated to an output port of the SPS-series FTIRs. This sample chamber allows small samples (such as cuvettes or thin films) to be studied in both reflection and transmission. The sample chamber shares the vacuum environment with the FTIR, but an optional window or vacuum gate (sold separately) allows the chamber to be isolated from the FTIR. The sample chamber utilizes reflective aspheric optics with gold coating for excellent far infrared and terahertz operation.
View Complete Details
Ask Latest Price & Details
SPS-300 Sample Chamber

SPS-300 Sample Chamber

This external transmissionreflectance sample chamber can be mated to the output port of a Sciencetech FTIR system. This chamber allows small samples to be studied in both transmission and reflectance modes, at temperatures ranging from approximately -20 Celsius to room temperature. The sample chamber utilizes gold coated aspheric optics for excellent signal in the infrared and terahertz region.
View Complete Details
Ask Latest Price & Details
Arc Lamp Igniter

Arc Lamp Igniter

The 500-IG-75ST model igniter is used to ignite the ST-75 Hg arc lamp. The igniter produces a conditioned 800V ignition pulse to the lamp. This igniter should be used in conjunction with the 75W Fixed power supply (150-9041) and the ST75 light source (100-9070)
View Complete Details
Ask Latest Price & Details
Adjustable 1kW power supply with touch screen interface Sku: 150-9055

Adjustable 1kW Power Supply With Touch Screen Interface Sku: 150-9055
Sciencetech's new power supplies use an integrated Touch Screen interface with several built in components:1. Lamp Life timer2. Fan safety control timer3. Temperature controller (optional)4. Shutter controller (optional)
View Complete Details
Ask Latest Price & Details
Constant Current Adjustable Power Supply, 0-300W Sku: 150-9044

Constant Current Adjustable Power Supply, 0-300W Sku: 150-9044
Sciencetech's 500-300 power supply is designed to drive short xenon, and mercury-xenon arc lamps operating between 100W and 300W. Highly stable DC current outputDisplays the Current, Voltage and Power of the lampOutput Current Adjustable (5 to 20A)Switching power supply; low noise (80%Input Voltage: 115VAC 240VACInput Current: 2A1AInput Frequency: 60Hz50HzDimensions (L x W x H): 16.5" x 13" x 3.5" (42cm x 33cm x 9cm)Weight: 7.5 kg (16.5 lbs)
View Complete Details
Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Sandeep Yadav (Deep Photonics Instrumentation)
  • Plot No. 1054-18, Railway Road, hisar, Haryana - 125033, India
  • Share us via
    Linkedin pinterest
  • Call 08069182174 Ext. 745