Secunderabad, Telangana, India
Verified
Add Review
Our Products
Hydrophillic Swellable Water stopper Bar is a rubber based water stop designed to stop water infiltration through the cast in place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. It also fills the cracks and pores on the concrete.
UsageAreas:-
Used for concrete joints, and intersections of old and new concrete in the construction of pools, foundations, tunnels, manholes, retaining walls, garages, curtain walls, water deposits, water purification facilities and pipe penetrations into above-mentioned constructions
Advantages:-
SurfacePreparation
The surface must be clean and dry. It must not be applied to wet, frozen, greasy or dusty surfaces, and under wet weather conditions.
Application:-
Rubber Speed Breakers are used to reduce the Speed of Vehicles. The Speed breakers locate in some places which surface consists of little bit height to compare with normal roadway.We being a Leading Manufacturer, Supplier, Exporters of Rubber Speed Breakers in Hyderabad (India) also called as Speed Bumps, Speed Bumbers, Speed humps, Speed Breakers.
1.INTRODUCTION TO RUBBER SPEED BREAKERS:-
We are specialized in manufacturing of Rubber Speed Breakers, which are made from high grade rubber and EPDM (Ethylene Propylene Diene Monomer (M-class) Rubber). These Speed Breakers are highly resistant to various impacts and harsh weather conditions. We provide speed breakers with reflectors. Speed Breakers are Traffic Management devices. This can be used to slow down the vehicles passing over them. The available end-caps finish off the ends of the speed bump for a smooth complete look. The Speed Breakers also called as Speed Bumps and Speed Humps and Speed Ramps.
2.DESCRIPTION / SPECIFICATIONS OF SPEED BREAKERS:-
3. FEATURES OF SPEED BREAKERS:-
4.APPLICATIONS OF SPEED BREAKERS:-
5.HOW SPEED BREAKERS WORKS:-
The Speed Breakers is a product which is used to reduce the speed of Vehicles. These are used in controlling the accidents on highways and also helps to control the speed of Vehicle.
There are Two Pieces in 1 Meter of Speed Breakers. One is in Yellow Colour & the other is in Black Colour. There are 2 Reflectors in One Piece i.e in 1 Meter we can find 4 Reflectors in the Shape of Arrow as Shown Below. There are 4 Screwing Points on one Piece of Speed Breaker to Install the Speed Breaker on Roads. On one Meter of Speed Breaker we can find 8 Screwing Points for Installation. There are zigzag lines on Speed Breaker which helps to drain out the water on Roads when rain falls and does not face the colour in any weather conditions.
Rubber Speed Bumps it is very compact and has high resistance capacity to withstand severe impacts. The pre-coloured UV stabilized material (Black & Yellow) provides it permanent colour. For clear vision in the night two reflectors are fixed on both sides of the bump. We hold expertise in offering our valuable clients a wide range of Speed Breakers. Precisely made from optimum quality rubber sourced from reliable vendors in compliance with the set industry standards, these breakers are extensively demanded in the global market.
The Speed Breakers are used to reduce the Speed of Vehicles. The Speed breakers locate in some places which surface consists of little bit height to compare with normal roadway. The main purpose is to reducing the Accidents by control of vehicle speed. When the Speed breakers having distance between one to another is minimum 100 to 200 meters its based on the traffic of road. This Speed Breakers conforms to government standards and industry regulations. National Highways Authority of India is responsible for highways.
Speed Breakers are installed at where there is a consistent record of accidents are happened to the speed of vehicles. These are installed at Toll Plazas, entry point of bridges and narrow roads to control the vehicle speed.
These are also placed at urban areas for minor roads like school zones, hospitals, residential areas, bus Stations and railway stations. So that childrens and Senior citizens are easily crossed the road. The Speed Breakers not recommended for high speed roads and highways outside of urban areas.The vehicles drivers should be warned of the presence of speed breakers are installed on the road by posting a suitable sign boards. And speed breakers are mostly used in yellow and block colour combination with reflectors. These reflectors which reflects the light to visible the place of speed breakers in night time.
6.Life Span & Warranty of Speed Breakers:-
7.CONCLUSION:-
These are the Complete Specifications & Uses of of Speed Breakers these are very helpful in Highways, Parking areas, in construction sites etc., to control the accidents. This is why it is called as a worlds product.
Markings on concrete Rubber Moulds block surfaces have been done using traditional paint or thermoplastic materials. Maintenance of these markings is difficult and costly. The frequency at which repainting has to be done is very high.
Advantages of Rubber Moulds Pavers Block:-
Neoprene rubber rolls are available for a range of applications in the industrial and residential markets. This type of neoprene rubber has excellent stretching capabilities while remaining strong enough to be elastic. Neoprene rubber rolls are available in 50 to 60 durometer and can be ordered in other durometers by special request. With an average elongation of 250% and an average of 900 PSI tensile strength, Neoprene rubber rolls will handle most tough industrial environments and moderate to heavy alkaline and chemical resistive situations. Neoprene Rubber Rolls are in accordance with ASTM D 2000 and SAE 3200.
Applications: Neoprene is resistant to many chemicals and oil, making it particularly useful for flooring, table tops, machine shops and auto repair shops. Neoprene is used in where abrasion can be prominent and the neoprene has to hold up under repeated uses of abuse like those in a sand blasting or shot blasting room, industrial plant as a shock absorbing pad. Neoprene in Roll form is a very durable material for long time use and applications being as the material is in a roll, it is an excellent purchase for volume runs on production parts.
A) Nylon Insertion Sheet
Color: Black Surface: Smooth Temperature Range: -30 to 220 F
Description: Neoprene Fabric reinforced sheets are fiberglass fabric coated with neoprene rubber on both sides. Reinforced Neoprene is designed for use in applications where stresses are typically static and pressures are usually low. Cloth inserted Neoprene rubber has a glass fabric featuring flame & heat resistance, excellent dimensional stability, inert to most common chemicals, high strength to weight ratios, fungus and mildew resistant. Reinforced Neoprene rubber can be used as a flange gasket where bolt or compression loads are so high that non reinforced rubber would squeeze or extrude out between the flanges.
Applications include meters, control devices, welding curtains, regulators, pumps, and diaphragms. Fiberglass reinforced neoprene diaphragms usually contain one or more plies of reinforcing fabric for added strength and this neoprene material would be well structured for a re-enforced rubber application.
DEESA PVC Foot Steps is uniquely designed for underground water tanks, sewerage manholes, & overhead water tanks. This material is used instead of conventional Mild Steel /Cast Iron steps.
It offers superior resistance to all type of corrosive environmental characteristics of sanitary sewers. It also provides very tight grip for the safety of work men.
Specification & Material used
These PVC Foot Steps are very widely used by the Civil Contractors in underground / overhead water tanks, sewerage manhole, multistoried buildings and so many other water filling places.
| S No | Length | Breath | Thickness | Steel Reinforcement | Steel STD | PP Material |
| 1 | 263 | 164 | 25*23 | 8 mm TMT | As per IS 1786 | Colour black |
| 2 | 263 | 164 | 25*23 | 10mm TMT | As per IS 1786 | Colour black |
| 3 | 263 | 164 | 25*23 | 12 mm TMT | As per IS 1786 | Colour black |
| 4 | 263 | 164 | 25*23 | 10 mm TMT | As per IS 1786 | Colour orange |
| 5 | 263 | 164 | 25*23 | 12 mm TMT | As per IS 1786 | Colour orange |
| 6 | 375 | 165 | 25*25 | 10 mm TMT | As per IS 1786 | Colour black |
DEESA FLEX PVC Water Stops are flexible Plastic strips which provide a physical barrier to Water at concrete joints, mostly in basements, Water retaining structures like Water tanks, Swimming pools, structural foundations & other below ground level constructions. Waterstops are also termed as Water Bars, seals construction joints. A typical waterstops have two identical half on both side of a central bulb. These additional extensions are provided with the aim of increasing path length for water entering behind the edge of water stop.
Compounding of PVC Water StopperWaterstops are manufactured at Dessawala Rubber Industries from Anti-Ageing customized plastic compound with PVC as a base polymer and exhibiting required properties like High Elasticity & Tensile Strength, Immune to Corrosion, Excellent weather resistant, Unaffected by acids, alkalis, metals salts and other chemicals, Lower water absorption, Withstand high Hydrostatic pressure, Can bear shocks of heavy turbines, Earth quakes, Floods.
Application in construction IndustryPVC Water stoppers withstand expansion or contraction movement at joints and take care of any deflection or displacement arising due to change in temperature, differential settlement of foundation, Geo disturbances causing Seismic forces like earth quack, thus eliminating danger of cracks.
Water Stoppers are tied to steel frame work through eyelets by means of small wires (same being depicted in the adjacent figure), certain metal clamps meant to grip the water stop seal and keep it in proper position.
Firstly one half of the waterstop is embedded in the concrete leaving the second half extended. Second half is also embedded leaving the centre bulb free for expansion and contraction movements.
Area of Application:
