Our Products #4486690

The ROBOFEED is a simple and reliable feeder, designed for those that want to automate the pulling process of strip, wire and profiles of different dimensions and shapes. It offers an easy and complete way to connect all the existing machines, thanks to it's reduced dimensions and the possibility of interfacing with any sensor or pneumatic command. The brushless motor ensures less than 0.01mm precisionon the linear step movement, that allows you to stop perfectly in phase, avoiding bumping on the tools and without any mechanical adjustment. Completes the Robofeed the cycle programmable cutter.

We supply you with all technical machines required for the equipping of your analytical laboratory. We cover the whole process chain with our high quality components. Your advantage: you have a competent partner for all your laboratory technology and can benefit from our reliable service.

Compact, space-saving, modular system series. Capacity: 3 to 100 kg precious metal within 8 hoursEasy to expand due to modular designIncluding agitator motors, heating, condensers, solvent containers in SCHOTT glass, precipitation and filter units, reservoirDissolving medium aqua regia ( HNO3 +HCL)The complete unit is located under an exhaust hood and in a drain trayAcids and solutions are not conveyed through pressing but by suction (vacuum)

Technological leader in the field of recycling systems Compact, space-saving, modular recycling seriesCapacity: 2.5 -120 kg precious metal within 8 hoursEasily extendable through modular designThe dissolving tank angled at 30 rotates. This realises an excellent mixing process with the precious metal granules continually grinding against each other. This process serves to remove the silver chloride from the alloy surface and then finally dissolves it.Heating is not requiredCondenser in SCHOTT glassDissolving medium aqua regia ( HNO3 +HCL)The complete unit is located under an exhaust hood and in a drain trayAcids and solvents are not conveyed through pressing but by suction (vacuum)

The modular system can be expanded at any time. One cell for approx. 15 kg of fine silver consists of the following components: electrolyte tank 275 l in PP for up to 10 anodes each with 8 kgcathodes made from polished stainless steelfilter cloths made from acid-resistant fibreDrive with scraper The system requires no special maintenance and can be operated continuously. The silver to be processed must be melted to anodes which are then hung in the anode holder. The purity of the silver should not be below 70%.

A revolutionary, patented electrolytic process which will influence the technological development in its field. Gold alloys with a gold content of at least 55% are refined in a single step to fine gold with a purity level of 99.99%. No use of toxic or corrosive acids such as aqua regia or cyanide. The process is fully automated and is controlled by a microprocessor. During the processing there are no toxic or corrosive gasesvapours. The processing time required to recover fine gold with a purity level of 99.99% is not more than 6-8 hours. The electrolyte used can be re-used up to 30 times. There is no requirement for gold to be in the electrolyte (as was the case with previous electrolyte processes) and therefore the running costs are very low. without aqua regiawithout cyanidewithout corrosivetoxic gasesvapoursgold alloy with a gold content of at least 55% is refined in a single step to fine gold with a purity level of 99.99%process time 6 to 8 hoursno gold required in the electrolyteno spent acid to dispose oflow running costs because the electrolyte is re-usedfully automated process with process controlpatented process

The LD SERIES range of hight precision weighing scales are skillfully crafted to delivery reliable and accurate result. Simple and convenient operation with highly intuitive interface will enhance user experience in day-to-day weighing. The seamless construction and excellent readability are best suited to flawless performace.

Heavy capacity and rugged electronic weighing scales for chemical industries, wholesalers, grain merchants & various other industries.

Application Heavy capacity and rugged electronic weighing scales for chemical industries, wholesalers, grain merchants & various other industries. Standard Features Battery Operatedsmall and handycan easily be carried in your shirt's pocket

Introducing platform scale with Roller. This scale is being manufactured for Amul Dairy on which Amul butter packets will be weighed. Due to roller its easy to move the packets. Standard Features Capacity -40kg to 300kgFood Packing IndustriesSuch as Amul DairyEasy to load barrels

This is a universal machine used for all the wet processes of finishing-Roughing, Sanding and Polishing on jewelry parts, all ferrous alloys especially stainless steel. The machine uses vibration effect that is transmitted to a polyurethane tank by an adjustable masses vibrator. Thus, the materials placed inside the tank gets three kinds of motion: centrifugal, helical and vibrant. Their combined action, together with water and abrasive materials (with Liquid compounds or paste) makes it possible to achieve superior levels of finishing.

Designed for the world jewelry, the machine is used for the washing of trees form the plaster casting. Machine Is constructed entirely of steel AlS1304.

These are used mainly for comprehensive finish treatments - Roughing, Grinding and Polishing of very small objects. These machines incorporate the spin speed of a main course with four containers which rotate around their axis, but in the opposite direction of the main course. This combination of movements, combined with the particular shape of the inner containers made of polyurethane [anti-wear and anti-aging] and the new "Swing System", provides a fine finish.

Used mainly in jewelry and in dental machines, Magnetic Shiners are used for polishing of jewelry with stones and jewels that have small undercuts and cavities that are difficult to reach. They are widely used in polishing of small parts and non-ferrous metals. The machine uses a strong magnetic field that brings fast, rotary movement inside a tank that contains water, a special compound and small stainless steel needles. The movement created is of cetrifugal, elliptical type that allows the needles to reach any point of the objects being treated.

Single or double place bench with suction system for dust recovery. Main technical features : Strong metallic structureWork surface in wood, lined with laminated placsticProtection hood with recessed lamp and plexiglass panelLarge sucked air volumeFilters of suitable sizes (bag filters) fixed with a quick-release systemEmergency system for stop motor

This process is able to achieve uniform gold colours, of tanned brown tone, like Chocolate, even over a complex shaped items thanks its excellent throwing power. Another quality is the low production cost because the small degree of plating efficiency combined with a high covering effect. This bath contains 0, 6g of gold per liter. One unit bottle is to prepare on liter solution, not including gold. You should add gold salt, separately dissolved in hot deionized water.

This system is a special morphology of the eletroplyte, a gel from. It gives great advantages in comparison to the classical "brushpen" plating. However it required more distinctive attentions.

Small-medium size presses, with 2 columns (T.15 2C and T.35 2C), 4 columns (T.35 4C and T.75 4C) and welded iron structure ( NKT.150), where the number means the power of the machine. These presses are very simple to operate and it is possible to adjust the upper dead point (U.D.P.), the lower dead point (L.D.P.), to cause the intervention of the hydraulic brake and to reduce the down-speed through a special electronic control system. It is also used to set the working pressure and it's possible to use the display to read the counter pieces, to store programs and to increase or to decrease the height of 0.01 millimetres by pushing the appropriate pushbuttons.

Medium-big size presses, with four-column structure (T.125 4C, T.200 4C, T.300 4C, T.400 4C and T.600 4C), and is equipped with a sophisticated electronic control with big display. Equipped with breakdowns research and checking of all the press operations. Moreover it's possible to use the multi-pressing device, i.e. the press can work with multiple different pressings and timers, hydraulic cushion and memory of the working programs. The mobile table with automatic lubrication slides on the four-columns and guarantees a very high degree of precision.

The Ambrogio Robotic Isle system proposed by us is born as an open system, where the final user could develop with us the interested work covering one or more of the seven segments which the isle is composed by, with his needs.

The Linker machine allows you to make welded or closed rings to link together different jewelry pieces, like chains, medal, closes etc. This technology allows you to use different shapes, only changing the tooling, also you can use wire of different matherials, shapes, sections, sizes. The welder is a special TIG welder with this technology inside.

The machine can make rings of any shape, each model will has as base two interchangeable tools. Fast in the tools substitution and easy in the direction. Thanks to an innovative system the machine can effectuate two different type of work process simultaneously. Moreover the machine can solder wires made of different materials and with different mechanic characteristics, without changing any regulation. The machine alternates any amount of rings and is perfect for diamond wires.

The SBF model wireburner machine permits to make round head pins from a wire coil. It is electronically controlled by a PLC, with the possibility of adjusting the working parameters in a smart and easy way. Maximum safeness with the initialize push button and the gas pushing emergency interruption. Availability of automatic cycle working mode with the piece counter sensor and slide to collect the output pieces.

The MM70 CHAINING model chain ma- chine can make ring of any shape, geomet- rical or not, each model with its proper in- terchangeable tool set. Fast tools changing and user friendly in- terface. In addiction to make simple rings, the machine has an innovative system to make welded chains.

The MM70 wireshaping is the automatic wire forming machine, made to make any kind of shape with the same dimensions and models of MM70 CHAINING model but without chaining. The MM70 wireshaping is the automatic wire forming machine, made to make any kind of shape with the same dimensions and models of MM70 CHAINING model but without chaining.

The oleodynamic press machine model PRATIKA has an innovative system, that allows to make centesimal of millimeter positioning adjustments, through only three working parameters: Falling Time Rising Time Pause Time Through the touch screen display, the adjustments can be made during working cycle, ensuring to abtain the maximum performace from any stamping tool set. With PRATIKA press machine you are sure to have the right working pressure, position and speed ever.

The TULIPANO MIDI machine model produces balls from strip and works in full automatic cycle, elec- tronically controlled in any phase. The oleodynamic technology supplies the necessary stamping strenght in any moment, ensuring the maximum safeness to the operator thanks to the fast stopping. The tools are supplied with three stamping bases and are fast inserting with cartridge shape, indeed it is possible to change completely the tools in ten minutes. The machine is supplied by fixed safety protections and its accesorized with a strip feeder and a recovery group for the strip wasted, a strip-end sensor and an automatic balls ejecting module with piece counter. The touch screen 4.7 colour LCD supplied with the machine, allows the operator to easily set the working parameters.

The STI200 model machine makes earring posts from the wire. After loading the coil of wire, the machine automatically rolls, cuts and collects the post without any waste or loose of material. It is possible to use any kind of metal wire, without a constant hardness and with different diameters without any mechanical adjustments. The inno- vative hammering system makes single or double cyrcular grooves and it is possible to adjust the groove depth and the lenght of the post. On the machine there is a settable electronic piece coun- ter and can be equipped with the stamping group with custom trade mark and stamp.

One machine in its kind of work, allows you to make OMEGA-CLIPS, in automatic mode and holed, used as earrings terminals. This machine can drill any kind of metal. Easy to use and completely programmable by the display. Supplied with safety sistems for the product quality and reliability.

The model SPZ2010 polishing machine has two disks where can be loaded the objects to polish. The loading masks are interchangeable and the number of pieces loaded can vary depending on the single size. The automatic mode increases the productivity of your polishing treatment simply setting the polishing parameters: pressure and brushing times, brush rotation speed and disk rotation speed. The machine has a 3D working mode that allow polishing flat or dome objects.

Introducing Delmer's waterproof scales with an IP68 dust-tight and water proof protection, Full stainless steel housing, Stainless steel key, will not be damaged by overlay; Quick stabilization, Weighing units conversation (Kgg), Counting function, Battery indication, Overload Alarm, Waterproof load cell, Waterproof charger and Double displayFeatures and Characteristics Full 304 stainless steel materialIP 67 Waterproof indicatorWide rectangular pillarStainless steel platterUseful in a variety of applications

Technical Details This machine is designed for small gold-refineries, but complete with all features for industrial use. It is complete of: Heating inductorFrequency Static Converter 10KWMedium Frequency Power Plant (18 30 KHz) with No noise IGBT circuitCooling area with Gas protection (ArgonNitrogen)