Listing ID #26016
Company Information
Ask for more detail from the seller
Contact SupplierWe are Distinctly Recognized amongst Leading Hydraulic Injection Molding Machine Manufacturers and Exporters Located in India. with Selection of Differentiated Hydraulic System and Electric System, Even a Beginner Can Easily Operate Our Injection Molding Machine. Using Touch Screen, It Can Set Up Easily the Temperature Condition and Time Etc. At Each Mold Giving the Number to Each Mold. Remained Quantity of Rubber Maintains the Condition of Immature Molding By Cooling Up to the Nozzle Range. as Heater Single Line Equipment is Installed Inside, It’s Possible to Check Whether Each Heater Line is Cut or Not and Whether Heater Operates Right or Not. It’s Easy to Replace the Mold Thanks to the Ball Transfer, Installed in the Low Heat Plate. By L.m Bearing, Fixed in Slide, It Can Work Smoothly. Our Injection Molding Machine is Available On Rock Bottom Rates.
features : with Selection of Differentiated Hydraulic System and Electric System, Even a Beginner Can Operate It Easily. Using Touch Screen, It Can Set Up Easily the Temperature Condition and Time Etc. At Each Mold Giving the Number to Each Mold. Remained Quantity of Rubber Maintain the Condition of Immature Molding By Cooling Up to the Nozzle Range. as Heater Single Line Equipment are Installed Inside, It’s Possible to Checkwhether Each Heater Line is Cut or Not and Whether Heater Operate Right or Not. It’s Easy to Replace the Mold Thanks to the Ball Transfer, Installed in the Low Heat Plate. By L.m Bearing, Fixed in Slide, It Can Work Smoothly. to Save the Power Cost and for the Precise Control, It Applied the Electronic Proportion Control System.
- | - | DSIM- 150 | DSIM- 250 | DSIM- 300 | DSIM- 450 | DSIM- 650 | DSIM- 1000 |
---|---|---|---|---|---|---|---|
Clamping Force | ton | 150 | 250 | 350 | 450 | 650 | 1000 |
Clamping System | ton | 짿쿿쿿 / HY.D-RAM | 짿쿿쿿 / HY.D-RAM | 짿쿿쿿 / HY.D-RAM | 짿쿿쿿 / HY.D-RAM | 짿쿿쿿 / HY.D-RAM | 짿쿿쿿 / HY.D-RAM |
Injection Volume | cc | 1000 | 2000 | 3000 | 4000-6000 | 7000-10000 | 10000-16000 |
Injection Pressure(Max.) | kgf/cm2 | 1600 ~ 2000 | 1600 ~ 2000 | 1600 ~ 2000 | 1600 ~ 2000 | 1600 ~ 2000 | 1600 ~ 2000 |
Screw Diameter | mm | 40 | 50 | 50 | 60 | 60 | 70 |
Screw R.P.M | rpm | 0 ~ 120 | 0 ~ 120 | 0 ~ 120 | 0 ~ 120 | 0 ~ 120 | 0 ~ 120 |
Heating Plate | mm | 500x500 | 600x600 | 650x650 | 800x900 | 1000x1000 | 1200x1200 |
Day-Light | mm | 550 | 600 | 700 | 800 | 900 | 1000 |
Clamping Stroke | mm | 450 | 500 | 500 | 550 | 650 | 750 |
Min Mold Thickness | min. | 100 | 100 | 100 | 150 | 250 | 250 |
Heating Plate Capacity | kW | 12 | 15 | 18 | 28 | 38 | 46 |
Moter Power | kW | 11 | 11 | 15 | 15 | 22 | 30 |
Total Electric Power | kW | 30 | 32 | 38 | 53 | 70 | 90 |
Overall Dimension | m | 1.7ÿ2.5ÿ3.0 | 2.0ÿ2.5ÿ3.4 | 2.0ÿ2.7ÿ3.7 | 2.5ÿ3ÿ4.0 | 2.7ÿ3.0ÿ4.3 | 4.2ÿ5.5ÿ5.5 |
Machine Weight | ton | 7 | 8.5 | 10 | 18 | 23 | 46 |