Mumbai, Maharashtra, India
Our Products
Specifications
| Voltage | V ~ | 230 |
| Power | W | 2900 |
| Frequency | Hz | 50, 60 |
| Temperature | °C | 20-620 |
| Speed | m/min. | 0.5-12 |
| Air flow (20°) | l/min. | 500 |
| Air flow | % | 50-100 variable |
| Noise level | dB | 50 |
| Size L x W x H | mm | 410 x 260 x 240 |
| Weight | Kg | 11.5 with 5m cord |
| Crimps "crimp& heat seal" type connectors | |
| Two precision-ground wire cutters, up-front anvil-type and scissors type, located behind pivot point | |
| Cuts 6-32, 8-32, 10-32, 10-24 and 4-40 bolts and screws | |
| Scissors action wire stripper is precision-ground for accuracy and clean, neat stripping Strips stranded wire in 22 to 10 AWG sizes and solid wire in 18 to 8 AWG sizes | |
| Cushioned handles for user comfort, made of heat-treated tool steel for long life, reliability and accuracy. |
| The finest "Crimp & Heat-Seal" connector on the market today.Better wire contact - Less voltage drop - Better current flow | |
| Seamless butt connectors & brazed seam rings and spades - prevents opening of connector barrel for stronger crimp | |
| Uniform adhesive flow does not overflow onto terminal to impede contact | |
| Heat shrink tubing does not reduce in length, creating better insulation along with superior wire support and strain relief | |
| Translucent, adhesive-lined polyolefin shrink tubing - Allows visual inspection, prevents wire corrosion and provides a water and contaminant resistant seal | |
| Color-coded tubing with wire gauge imprint - Provides easy identification of the correct part for the job | |
| Superior integrity of electrical systems - Sealed electrical systems ensure the original integrity of wire connections and wiring harnesses and conforms with OEM standards |
| Description | Qty | |
| 18-20 AWG, #6 Stud, Red | 5 | |
| 18-20 AWG, #10 Stud, Red | 5 | |
| 14-16 AWG, #8 Stud, Blue | 5 | |
| 14-16 AWG, #10 Stud, Blue | 5 | |
| 14-16 AWG, 1/4" Stud, Blue | 5 | |
| 14-16 AWG, 3/8" Stud, Blue | 5 | |
| 10-12 AWG, #8 Stud, Yellow | 5 | |
| 10-12 AWG, #10 Stud, Yellow | 5 | |
| 10-12 AWG, 1/4" Stud, Yellow | 5 | |
| 10-12 AWG, 3/8" Stud, Yellow | 5 | |
| 18-20 AWG, #10, Red | 5 | |
| 14-16 AWG, #10, Blue | 5 | |
| 10-12 AWG, #10, Yellow | 5 | |
| 18-22 AWG, Red | 10 | |
| 14-16 AWG, Blue | 10 | |
| 10-12 AWG, Yellow | 10 | |
| 18-20 AWG, Female, 1/4" Tab, Red | 5 | |
| 18-20 AWG, Male, 1/4" Tab, Red | 5 | |
14-16 AWG, Female, 1/4" Tab, Blue |
5 | |
| 14-16 AWG, Male, 1/4" Tab, Blue | 5 | |
| 20 items and 115 pieces | ||
| UT-100 comes standard with Ultratorch, soldering tip, hot air tip, shrink attachment, tip and torch ejectors, sponge, tool holder and spanner wrench packed in a metal storage/carrying case | ||||||||||||||||||||||||
| UT-100-TC includes Ultratorch, three Ultratip soldering tips, hot air tip, shrink attachment, hot knife, tip and torch ejectors, solder, wire cutter, needle nose pliers, sponge, tool holder, spanner wrench, and cap packed in a rugged plastic storage/carrying case | ||||||||||||||||||||||||
| Triple function: soldering iron, flameless heat tool and brazing torch | ||||||||||||||||||||||||
| Lighter in weight than competitive models, making it easy to hold and use over extended periods of time | ||||||||||||||||||||||||
| Butane-powered, cordless and completely portable, ready-to-use in 30 seconds | ||||||||||||||||||||||||
| Adjustable temperature control | ||||||||||||||||||||||||
| Soldering temperature up to 932F/500C, ideal for use with today's lead-free solder | ||||||||||||||||||||||||
| Hot air temperature up to 1202F/650C, perfect for Solderseal environmental "heat and seal" connectors | ||||||||||||||||||||||||
| Torch temperature up to 2372F/1260C | ||||||||||||||||||||||||
| Sturdy metal tank holds enough fuel for up to 2 hours of operation | ||||||||||||||||||||||||
| UL & GS/TUV Listed for user safety | ||||||||||||||||||||||||
| Optional accessories available and interchangeable between UT-100 & UT100Si | ||||||||||||||||||||||||
| Use to pinpoint heat, remove surface mount components, repair vinyl, shrink heat shrink tubing, solder and desolder, spot dry, torch materials and more.
|
| Comes standard with 1.2" (30.7 mm) chisel type soldering tip | ||||||||||||||||||
| A top quality soldering iron for demanding production jobs and general heavy duty maintenance work | ||||||||||||||||||
| Great for running seams in sheet metal, soldering large connections in the electrical, plumbing, construction HVAC and metal working markets | ||||||||||||||||||
| Completely cordless, lets you work almost anywhere! Runs on butane. For best results we recommend Master ULTRATANE BUTANE fuel | ||||||||||||||||||
| Features pure copper based solder tips which are nickel and chrome plated and tinned; manufactured using a patented process which produces a uniform iron and chrome plating thickness for long lasting solder tip life. Tips need no filing | ||||||||||||||||||
| Sturdy metal handle and refillable tank holds enough gas to run 70 minutes at setting no. 3 | ||||||||||||||||||
| Quick start up. Comes up to full operating temperature within one minute | ||||||||||||||||||
| UL & GS/TUV Listed for user safety | ||||||||||||||||||
| Protected by international patents
|
| Standard with solder tip, heat tip and torch tip | ||||||||||||||||||||||||
| Completely portable, lightweight and easy to handle | ||||||||||||||||||||||||
| Economically priced | ||||||||||||||||||||||||
| Temperatures up to 2370F/1300C | ||||||||||||||||||||||||
| Ignite unit with flint lighter built into the cap | ||||||||||||||||||||||||
| Use to pinpoint heat, silver solder, solder and desolder, shrink heat shrink tubing, strip insulation with hot knife, torch materials and more. SPECIFICATIONS
|
| PART NO. | DESCRIPTION | PART NO. | DESCRIPTION |
| 35388 | 2.4 mm Solder Tip - Std EI-20 | 35398 | 2.4 mm Solder Tip - Base req'd |
| 35389 | Flameless Heat Tip - Std EI-20 | 35399 | Double Sharp Tip - Base req'd |
| 35390 | Torch Head - Std EI-20 | 35400 | Hot Knife Tip - Base req'd |
| 35391 | Hot Knife Tip - Std EI-20K | 35401 | 1 mm Solder Tip |
| 35392 | Cap with Stiker Wheel - Std EI-20K | 35402 | 3.6 mm Solder Tip |
| 35393 | Flat Flame | 35403 | 4.8 mm Solder Tip |
| 35934 | Reflector | 35404 | Disc Tip, Round 1" dia. |
| 35395 | Solder Head Base | 35405 | Cutter Wheel Tip |
| 35396 | Poly Cut tip - Base req'd | 35406 | Scraping Blade |
| 35397 | Needle Tip - Base req'd | 35407 | Popular Accessory Kit |
| Standard with unit, solder tip, heat tip, shrink attachment and protective cap | |
| Built-in fuel filter for consistent fuel ignition | |
| Adjustable temperatures up to 1004F | |
| Built-in window indicates fuel level | |
| Dual function soldering iron and heat tool | |
| Sturdy metal tank that holds enough gas for 4.5 hours of operation at #3 setting | |
| UL & GS/TUV Listed for user safety | |
| Use to pinpoint heat, shrink heat shrink tubing, solder and desolder, strip insulation, terminate specialty connectors, and more. |
| Standard with body, 2 solder tips (1-.5mm conical tip and 1-1.5mm chisel tip), tip removal wrench, and 3 AA Alkaline batteries | ||||||||||||||||||||||||||
| Lightweight and completely portable, equivalent to a 6W iron | ||||||||||||||||||||||||||
| Solders longer, approximately 60 minutes continuous duty | ||||||||||||||||||||||||||
| Solders up to 160 joints intermittently with new batteries | ||||||||||||||||||||||||||
| Fast start-up, reaches 361 F (183 C) in 10 seconds | ||||||||||||||||||||||||||
| Total of 8 tips available, 2 standard | ||||||||||||||||||||||||||
| Top quality, plug-in solder tips incorporate built-in heater (patent pending) | ||||||||||||||||||||||||||
| Use to solder and desolder micro to small sized parts, perfectfor field service and repair work. SPECIFICATIONS
|
| PART NO. | DESCRIPTION | PART NO. | DESCRIPTION |
| 35364 | .5mm conical tip(std.) | 35366 | 1.0mm chisel tip |
| 35367 | 1mm conical tip | 35372 | 1.5 chisel tip (std.) |
| 35370 | 1.5mm conical tip | 35373 | Tip remover |
| 35365 | .8mm spade tip | 35374 | Protective cap |
| 35368 | 1.3mm spade tip | 35375 | 1.5V AA Alkaline batteries, package of 4 |
| 35371 | 1.8mm spade tip | ||
| 3 models produce 300F, 500F or 750F. High temperatures accommodate many heating, drying & shrinking applications | |
| High air flow rating - 47 CFM at 2200 FPM means jobs get done fast | |
| Brushless induction type motor for quiet continuous duty operation | |
| Rubber backed stand, permits 90 non-slip adjustability. Use in any position or mount on equipment | |
| Comfort balanced handle for carrying or portable use | |
| Use to bend plastics, dry materials, parts and ink, heat materials, mount over conveyor lines and on machinery and more |
| AH-301 | 300°F | 150°C | 120V | 10.0A | 1200 W | 60 Hz |
| AH-501 | 500°F | 260°C | 120V | 14.0A | 1680 W | 60 Hz |
| AH-751 * | 750°F | 400°C | 120V | 18.0A | 2160 W | 60 Hz |
| AH-302 | 300°F | 150°C | 230V | 5.2A | 1200 W | 50/60 Hz |
| AH-502 | 500°F | 260°C | 230V | 7.3A | 1680 W | 50/60 Hz |
| AH-752 | 750°F | 400°C | 230V | 9.4A | 2160 W | 50/60 Hz |
| two heat settings: 500 & 1000 f - accommodates many automotive and commercial applications. | |
| two fan speeds - low & high (7 & 9 cfm) | |
| resettable thermostat - protects element against over heating | |
| lightweight - 1 lb. - easy to hold at any angle for long periods of time, eliminates operator fatigue | |
| built-in hand guard - protects hand and fingers. Recessed switch guards against knocks and bumps | |
| 3-wire grounded cord set - a positive grounding system for user safety | |
| ul and cul listed - safety agency tested & approved for user safety | |
| thermoplastic housing - for high impact durability | |
| built-in stand - very stable, allows user to set heat gun down in an upright position. | |
| use to bend and form plastics, dry body fillers, remove decals, spot dry paint, shrink tubing, packaging and more. |
| Standard with UT-35 iron with protective cap and a unique 1.6mm chisel type preheat tip mounted. | |
| Completely portable, lightweight and easy to handle, does not require cords, batteries or cartridges. | |
| Adjustable temperature control quickly regulates power to the tip, equivalent to a 20-60 watt electric soldering iron. | |
| Features unique iron plated, multifunction, corrosion resistant, preheat solder tips which work as both a soldering and flameless heat tip at the same time. | |
| Unique tips heat up quickly and last longer. | |
| Built-in window indicates fuel level. | |
| Refill with Master Ultratane Butane for best performance. | |
| GS/TUV Listed for user safety | |
| Use to pinpoint heat, remove surface mount components, repair vinyl, shrink heat shrinkable tubing, solder & desolder, spot dry, strip insulation with hot knife and more. |
| Complete system comes standard with 650F heating element, adjustable stand and heat shrink attachment | |
| Ideal heat & air flow (3.8 CFM), performs benchtop heating jobs without excess air flow, wont blow components around work station | |
| Quiet running motor, eliminates noisy production areas | |
| 3 optional easy-to-change plug-in heating elements available: 500, 650 & 800F | |
| Use to activate adhesive, cure epoxies, dry components, melt solder preforms, remove decals, shrink tubing and more |
ORDERING INFORMATION
| MODEL NO. | VOLTS | Hz. | AMPS | WATTS |
| 10008 | 120 | 60 | 4.5 | 475 |
| 10009 | 220 | 50/60 | 2.0 | 450 |
| 10010 | 240 | 50/60 | 1.9 | 450 |
REPLACEMENT HEATING ELEMENTS - OPTIONAL
| PART NO. | COLOR | TEMP °F | TEMP °C | VOLTS | WATTS |
| 20012 | Blue | 500 | 260 | 120 | 340 |
| 20013 | Silver | 650 | 343 | 120 | 475 |
| 20014 | Black | 800 | 427 | 120 | 525 |
| 20217 | Silver | 850 | 454 | 120 | 108 |
| 20033 | Blue | 500 | 260 | 220 | 400 |
| 20034 | Silver | 650 | 343 | 220 | 450 |
| 20035 | Black | 800 | 427 | 220 | 500 |
| 20160 | Blue | 500 | 260 | 240 | 400 |
| 20161 | Silver | 650 | 343 | 240 | 450 |
| 20162 | Black | 800 | 427 | 240 | 500 |
| Self-igniting piezo electric ignition that is easy to start and eliminates need for lighter | ||||||||||||||||||
| Self-contained, metal fuel tank that is rugged and lightweight, easy to use, eliminates bulky canister | ||||||||||||||||||
| Large fuel capacity, 80 cc self-contained tank for 30-minute continuous run time | ||||||||||||||||||
| Large sized adjustable blue flame that accommodates many heavy-duty industrial applications with temperatures up to 2500F/1300C | ||||||||||||||||||
| Safety lock that prevents unintentional ignition, locks for storage | ||||||||||||||||||
| Meets Consumer Products Safety Commission (CPSC) Requirements | ||||||||||||||||||
| Use to braze with special alloy welding rods, heat and bend thin metals, loosen rusted bolts, pop dents out of metal, shrink and terminate heavy wall adhesive lined tubing, solder and desolder, and more. SPECIFICATIONS
|
| Standard with unit, solder tip, heat tip, shrink attachment and plastic cap | |
| Built-in self-igniting button for consistent ignition | |
| Pistol grip design, great for extended use applications | |
| High performance, solder tip can reach approximately 932F/500C | |
| Built-in window indicates fuel level | |
| High capacity can run up to 3-hours on a full tank | |
| Use to pinpoint heat, shrink heat shrink tubing, solder and desolder, strip insulation, terminate specialty connectors, and more. |
