Glass Fiber reinforcing Terromesh with alkali resistant coating is developed to prevent cracks forming in different applications in construction industry as well as for reinforcement of mortars and non load bearing concrete. It prevents hair cracks and clefts caused by movements of the underlying elements (bricks, prefabricated or lightweight blocks etc.) or by external agents .It is used for reinforcement of inside concrete floors, elimination of cracks during repair of thin concrete layers (balcony…) and other non-structural concrete applications in buildings. Terromesh is nowadays employed in all state-of-the-art constructions due to its high tensile strength and elastic properties of the fiberglass. This high-performance, alkali-resistant mesh will not rot, rust or corrode, and provides increased strength in different cementitious applications.     FEATURES & BENEFITS Specially developed coating provides good adhesion with concrete to improve tensile strength and increase impact resistance. Inhibits and controls the formation of intrinsic cracking in concrete Reinforces against impact forces, shattering forces and material loss from abrading forces Reinforces against water migration Provides improved durability Imparts toughness to hardened concrete Reduces plastic shrinkage and settlement cracking Provides residual strength     Uses Terromesh is used for all types of house hold water proofing as it provides strength to the waterproofing due to its high tensile strength and alkali resistance. Terromesh offers a reliable solution for a wide variety of applications. It can be used for the bridging and reinforcement of cracks in plaster as well as in other construction works. Packaging Roll size 1m x 50 m

errocol is a revolutionary water resistant multipurpose adhesive with excellent bonding strength. It is highly recommended by experts for bonding Wood, Laminates, Plywood, Veneer, Hardboard, MDF etc. Terrocol is so easy to apply that even non-experienced carpenters can work with it comfortably. It can be used in bonding various materials. Terrocol is also useful in paper industries, textiles, book binding etc. Terrocol is available in different packaging quantities of 500 gm, 1 Kg, 2 Kg, 5 Kg, 10 Kg, 20 Kg, and 50 Kg. Following are some of the features of this product: High bonding strength Resistant to water and heat Gives high coverage Multi purpose Eco-Friendly

Terroseal is an elastomeric, flexible single pack waterproofing membrane made out of 100% pure acrylic polymers. Hair line cracks on walls and terrace can easily be filled by Terroseal. It’s smooth and sheen finish adds to the aesthetic look unlike other waterproofing products.     Easy to apply ( Apply by brush or spray) Easy to maintain Resistant to salty water, humidity and atmospheric changes Economical Finest waterproofing properties Excellent elastomeric properties Provides strength Strong barrier for water and moisture

Terroseal Building Guard is a water-based high performance water repellent compound. It forms a hydrophobic barrier beneath the surface and seals out moisture while remaining highly vapour permeable. The visual appearance of the treated surfaces will show nominal or no change resulting from product application. The benefits include enhanced resistance to efflorescence, freeze thaw damage, cracking and spalling. Cured system is resistant to ultraviolet light and may be used as a sealer for surface coatings.   Terroseal Building Guard penetrates and bonds deep within the masonry substrate to provide long- lasting protection against water related staining or deterioration. It does not produce a surface film or impair the natural breathing characteristics of treated surfaces. Advantages Any Paint can be applied on the applied surface. Exhibits good beading effects. 100% water vapour permeable. Mildew and fungus resistant. High resistance to alkali attack. Can be reapplied to treated surfaces. Alkaline stable – suitable for new “green” concrete. Natural substrate color and surface textures are unaffected, with little to no gloss created. Penetrates deeply to produce long-lasting protection on vertical or horizontal surfaces. Effective on most vertical or horizontal exterior, above-grade masonry surfaces.  

Terroseal Waterproofing Paste is blend of lime and acrylic polymers. It can be applied by brush or trowel. This is a lime based system for waterproofing of concrete and masonry through the crystallization process. When it is applied to a concrete surface the active chemicals combine with the free lime and moisture present in the capillary tract, to form insoluble crystalline complexes. These crystals block the capillaries and minor shrinkage cracks in the concrete to prevent any further water ingress (even under pressure). In addition to waterproofing the structure it protects the concrete against sea water, waste water, aggressive ground water and certain chemical solutions. It is tested for use in contact with drinking water also.Terroseal Waterproofing Paste can be used for applications on inside or outside foundation walls of a house, building or any other concrete structure. Terroseal Waterproofing Paste is applied to interior or exterior below grade surfaces and between horizontal structural slab and toppings to protect against hydro static water pressure.             Water Proofing Paste A must usable product to make your building healthy beautiful. Key Benefits Strong adhesive strength Frost & deicing agent resistant Impermeable and easy application Good elasticity and also can be used with fiberglass mesh so as to enhance the crack resistant effect. Superior chemical resistance and non-toxic With good wear resistance Ultimate resistance to the reaction of carbonation Ultimate weather resistance Provide better water resistance in complicating application surface compare to membrane-type and ensure better integrity between applied surfaces and waterproofing.

It is a self adhesive, easy to apply and sets within 24 hours. The resultant surface is silky smooth, joint less, fire resistant, non stick, non absorbent, odorless, hygienic & washable. It does not peel off in normal coarse & is unaffected by heat or cold. Super Sandla requires very little maintenance & its durability improves with time. Water soluble paints like acrylic emulsion, plastic emulsion, distemper etc can directly be painted on Super Sandla. Super Sandla has captured a very good market among builders, architects etc. it is widely used in commercial, residential, industrial projects etc as it fits under all type of budget

Terroza White Wash with Primer & Insulation is an inexpensive and long lasting solution to give a new & fresh to look to your home. It can be used on exterior & interior surface of the building. Terroza White Wash is applied as a protective and decorative coat on freshly plastered walls. The use of Terroza White Wash gives a glowing milky look to the walls and is made keeping in mind the needs of the house owners and builders under various weather conditions. Furthermore, our range of Terroza White Wash is widely appreciated and used as one of the best alternatives for costly plaster and paint due to the following reasons:   Terroza White Wash does not need addition of any binder like in lime. A better glowing milky white appearance as compared to white cement, which has a greenish or bluish dull whiteness Easy to use and application procedure is same as cement paint Any kind of paint, putty can be applied on Terroza White Wash It has about 20% more coverage per kg as compared to white cement Cost effective as there is no requirement to add any binder and it is more long lasting It has additives that give the coating a better life     Features Perfect eco white wash for your building with three in one properties Terroza White wash give a white royal milky look to your building Insulation white wash regulates the temperature of your building & makes the environment pleasant in every season. Protect the building against changing weather. Works as a primer and give perfect finishing to your walls Just mix the strainers in this white wash and save the heavy costing of colour. Save lot of time & money.  

Terroseal Waterproofing Paste is blend of lime and acrylic polymers. It can be applied by brush or trowel. This is a lime based system for waterproofing of concrete and masonry through the crystallization process. When it is applied to a concrete surface the active chemicals combine with the free lime and moisture present in the capillary tract, to form insoluble crystalline complexes. These crystals block the capillaries and minor shrinkage cracks in the concrete to prevent any further water ingress (even under pressure). In addition to waterproofing the structure it protects the concrete against sea water, waste water, aggressive ground water and certain chemical solutions. It is tested for use in contact with drinking water also.Terroseal Waterproofing Paste can be used for applications on inside or outside foundation walls of a house, building or any other concrete structure. Terroseal Waterproofing Paste is applied to interior or exterior below grade surfaces and between horizontal structural slab and toppings to protect against hydro static water pressure.             Water Proofing Paste A must usable product to make your building healthy beautiful. Key Benefits Strong adhesive strength Frost & deicing agent resistant Impermeable and easy application Good elasticity and also can be used with fiberglass mesh so as to enhance the crack resistant effect. Superior chemical resistance and non-toxic With good wear resistance Ultimate resistance to the reaction of carbonation Ultimate weather resistance Provide better water resistance in complicating application surface compare to membrane-type and ensure better integrity between applied surfaces and waterproofing.

Terroza Putty is water resistant white cement based putty for cement, plaster walls & ceilings. Terroza Putty can be applied even on moist surfaces (Internal / External).   It has more adhesive strength, durability & increases the life of paints. Terroza Putty though white cement based, does not require water curing. It renders a smooth & durable surface suitable for all kinds of paints.     Application Procedure   Surface preparation Remove all the loose adhering material from the wall surface with the help of emery stone, putty blade or wire brush. Moisten the wall with sufficient quality of clean water.   Mixing of Terroza Putty Mix Terroza Putty with 35-40% clean water slowly to make a paste. Continue the mixing of material for 10-15 minutes till a uniform paste is formed. It is readymade wall putty for which no primer is required.   Application on surface Apply first coat of Terroza Putty uniformly on already moistened surface with the help of putty blade or trowel. Allow the surface to dry for at least three hours and then apply a second coat of putty. Leave the surface to dry completely. Always prepare the required quantity of Terroza Putty and use it within three hours of mixing with water. The total thickness of both the coats should be limited to a maximum of 1.5 mm. After complete drying of the surface, if needed, the surface should be rubbed with fine waterproof emery paper. The surface is now ready for painting.   Precautions while using Though it contains only non toxic materials still care should be taken to avoid dust inhalation while mixing and handling. in case of contact with eyes or mouth, wash with plenty of water.   Keep it in dry place and out of reach of children.   Storage Terroza Putty should be stored in a dry place.   Packing Terroza Putty is available in 20 Kg & 40 Kg. Packs.   Note  :The information given in this Leaflet is for general guidance only. Specific instructions for various site conditions can be provided on demand. However the company will not be responsible for any wrong application of the product

Glass Fiber reinforcing Terromesh with alkali resistant coating is developed to prevent cracks forming in different applications in construction industry as well as for reinforcement of mortars and non load bearing concrete. It prevents hair cracks and clefts caused by movements of the underlying elements (bricks, prefabricated or lightweight blocks etc.) or by external agents .It is used for reinforcement of inside concrete floors, elimination of cracks during repair of thin concrete layers (balcony…) and other non-structural concrete applications in buildings. Terromesh is nowadays employed in all state-of-the-art constructions due to its high tensile strength and elastic properties of the fiberglass. This high-performance, alkali-resistant mesh will not rot, rust or corrode, and provides increased strength in different cementitious applications.     FEATURES & BENEFITS Specially developed coating provides good adhesion with concrete to improve tensile strength and increase impact resistance. Inhibits and controls the formation of intrinsic cracking in concrete Reinforces against impact forces, shattering forces and material loss from abrading forces Reinforces against water migration Provides improved durability Imparts toughness to hardened concrete Reduces plastic shrinkage and settlement cracking Provides residual strength     Uses Terromesh is used for all types of house hold water proofing as it provides strength to the waterproofing due to its high tensile strength and alkali resistance. Terromesh offers a reliable solution for a wide variety of applications. It can be used for the bridging and reinforcement of cracks in plaster as well as in other construction works. Packaging Roll size 1m x 50 m

Terroza Crack Filler is composed of high quality weather durable acrylic emulsion polymers with silicon. This is a single pack, ready to use flexible crack filler for filling the cracks in plastered surface because it has excellent bonding, ease of application, water resistance, aesthetic appearance & durability. It is formulated by our team using quality assured raw material in appropriate composition for interior and exterior crack filling.     Benefits : Easy to apply. Excellent bonding to the base plaster. Flexible. Water Resistant. Excellent adhesion with cementitious surface. Excellent resistance to uv rays & atmospheric conditions. Suitable for interior & exterior surface. It can be tinted using water-based strainer. Technical Information Appearance: White Full curing time : 7days

After using the Terroza Cool Coating the electric consumption in Acs and other cooling appliances reduces by 25% approx.. Unlike conventional insulation materials Terroza stop heat from entering building roofs by re radiating it. Terroza Cool coating keeps the surface of your roof upto  30°C cooler which means it will be upto  10°C cooler inside your home. Key Benefits Environmentally green technology utilizing 100% water based acrylic polymers Suitable for Walls, Roof, Asbestos, Metal roof and almost all substrates. An energy saver. Upto 30% less energy consumption in air conditioned premises. Unsurpassed heat reduction. Temperature drop upto 10°C . Protect from carcinogenic particle release in asbestos roof. Reduce building decay and prolongs maintenance cycle. Non-combustible. Easy applied and maintained. Non-toxic, water safe and environment friendly.