Our Products
Dipflon spargers are ideal for steam entrainment or other applications where diffusion of the process fluid is desired. The bottom section of the sparger is an integral part of the encapsulating PTFE liner. It is designed to provide a radial spray that can be tailored to your exact requirements. Spargers can be drilled to your specification; number and diameter of holes, distance from the end of the tube and length of drilled section can all be specified.If not otherwise specified the drilling shown in table below is provided.
Description: | Lined C.S. pipes & spargers with inside & outside linings as per customers requirement. |
Sizes Available: | 25 NB to 100 NB and length as per requirements |
Lining Materials | PTFE |
Normal Size | Length | Hole Number | Hole Diameter | Hole Spacing | Angle |
---|---|---|---|---|---|
1 | 5 | 16 | 1/4" | 1.02 | 60° |
1*1/2 | 6 | 16 | 3/8" | 1.25 | 60° |
2 | 3 | 32 | 3/8" | 1.25 | 60° |
3 | 8 | 40 | 1/2" | 1.38 | 60° |
4 | 10 | 64 | 1/2" | 1.77 | 60° |
Description: | |
Sizes Available: | From 0.5" to 8" (15NB to 200 NB) |
Lining Materials | Lined with PFA/FEP/PVDF/PTFE/PP |
Description | Material | specification | Quantity |
---|---|---|---|
HANDLE LOCK PIN | M.S | IS : 2062 | 1 |
HANDLE WHEEL | 15NB TO 65NB PLASTIC 80NB TO UP DI/WCB |
C-PVC DI A395/WCB A 216 |
1 |
PVC CAP | NAYLON | PVC | 1 |
SCREW | M.S. | IS:2062 | 1 |
BONNET | DI | A 395 | 1 |
COMPRESSOR PIN | M.S. | IS:2062 | 1 |
SEALING WASHER | M.S. | IS:2062 | 1 |
DIAPHRAGM LOCK PIN | S.S. | 304 | 1 |
COMPRESSOR | DI | A395 | 1 |
DIAPHRAGM PACKING | RUBBER | NEOPRENE | 1 |
DIAPHRAGM | PTFE | D 4894 | 1 |
BODY | DI WCB CF8 CF8M |
A 395 A 216 A 351 A 351 |
1 |
LINING MATERIAL | PFA FEP PVDF PP ETFE |
D3307 D2116 D3222 D1238 D3159 |
-- |
Sizes Available: | From 1" Dia to 36" Dia upto 75mm maximum C/S for any make compressors |
Grades | All filled Grades like CFT / GFT / BFT / MOS2 / Ceramic field |
We are ranked amongst the foremost firms, engaged in offering a qualitative range of YStrainers. In agreement with the international standards, these products are manufactured by our experts using enhanced grade material and the newest technology. Our esteemed clients can buy these products from us in different modified options. Besides, we provide these products in diverse specifications to meet the assorted needs of clients.
Features
Sturdy designSimple installationIntricately finished
STRAINER BODY | DI CASTING ASTM A395 |
END COVER | DI CASTING ASTM A395 |
HEX.HD. BOLT | M.S. |
FILTER ELEMENT | GLASS FILLED PTFE |
SHELL | DI CASTING AS PER ASTM A395 |
LINING | PFA CONFORMING TO ASTM D3307 |
BELLOWS | PTFE |
BELLOWS FLANGE | IS 2062, Gr A |
REINFORCING RING | S.S 304 |
GROMMET | NEOPRENE |
LIMIT BOLT | MILD STEEL |
STOP NUT | MILD STEEL |
WASHER | MILD STEEL |
SPACER | MILD STEEL |
Lined S.G. iron cast body F to F & flanges drilling as per customers requirement.
FAB. BODY PIPE | CARBON STEEL ASTM A106 Gr. B SCH-40 |
WINDOW FLANG | ASTM A-105 OR IS:2062, Gr.A |
GLASS | BOROSILICATE TOUGHENED GLASS (MAKE : DIAMOND GLASS WORKS) 1- Ø125mm * 19mm Thick for 25NB 2- Ø125mm * 19mm Thick for 40,50, & 80NB 3- Ø150mm * 19mm Thick for 100NB 4- Ø210mm * 19mm Thick for 150NB 5- Ø270mm * 10mm Thick for 200NB |
Envelope Gasket | PTFE WITH 2mm THICK. ACID RESISTANT CAF INSERT |
LINING | PFA CONFORMING TO ASTM D-3307, TYPE-2 |
FASTENERS | IS:1367 Gr.4.6 |
Description: | Lined Reducing Flanges, Flange Material in MS as per IS 2062 GRA or in Ductile iron as per ASTM A 395. Flange drilling will be for A@ as per DIN 2673 PN 10 drilling willbe for B@ as per ANSI B 16.5 150# |
Sizes Available: | As per customers requirements and specifications. |
Grades | PFA / FEP |
Every Year there are unfortunate chemical plant accidents caused through the ignition of flammable chemicals. One of the key reasons is the discharge of an electrical spark generated through static charging.
Dip-Flon Engineering and Co. has been successfully manufacturing flow control products using fully fluorinated polymers-PTFE (Polytetrafluoroethylene) and PFA (Perfluoroalkoxy)
However with a volume resistivity in excess of 1016 cm, they are capable of resisting conductive discharge.
Therefore if static dissipation is a requirement another piping system may be required. Any charge that builds up on the bores of the liners can reach voltages that can discharge through the process media, creating a spark.
DipFlon Manufactures lined pipes and Fittings in Static Dissipating Materials. The PTFE AND PFA used both contains static dissipating agents, also known as antistatic properties. These materials are made in such a way as to allow potentially dangerous electrical charges to pass from the medium being conveyed within the piping system through to a safe earthling point via the metal pipe.
Moreover the chemical resistance, temperature/vacuum rating and mechanical strength, remains unchanged by the electrical properties of the PTFE and PFA. The conducting agent in the lining material is stable, not subject to chemical attack and will not leach into the process medium.