Dishant Electronics

Memco, Ahmedabad, Gujarat

Features

• Continuous duty electrical rating: 250/6A/50Hz
• Maximum energy dissipation: 300 joules
• Maximum spike current: 1000Amps
• Response Time:

There is no doubt about good continuous power availability in our country but the stringent requirements of the sophisticated equipments being used today underlines the necessity of clean power. The present AC power lines are superimposed with dangerous Spikes, Surges, Transients, Sags RFI noise and Harmonics. The high frequency noise can easily interfere with digital and electronic equipments causing data corruption, erratic behaviors and loss of memories. These line noises cause stress on semi conductor components and machine system experiences catastrophic & software failures, extensive damage to PLC's and storage media, leading to heavy loss of production, data and man-hours.

Isolation Transformers eliminate such noises and attenuates the spikes to minimal values, providing complete protection against such electrical disturbances. It consists of double wound Transformers with extremely low coupling capacitance to isolate the voltage spikes and reduce noise from mains with extremely high insulation resistance. They are most effective for medical equipment because of its characteristic of providing complete isolation from main lines. It is available on KVA rating from 3 KVA to 500 KVA in three phase and 1 KVA to 50 KVA in single phase.

Isolates the equipment from noisy powerlineReduces powerline Noise, Surges, Spikes & TransientsHigh Insulation resistanceProvides the complete Electromagnetic & Electro static shielding

APPLICATION

Features

• Microcontroller based high frequency Delta conversion online technology
• Pure sine wave output with DSP Digital signal processing technology
• IGBT based SPWM controlled Inverter
• Zero change over time
• Wide input voltage range
• Longer backup with external batteries
• Batteries up to 100 AH can be connected
• Cold start function
• Advanced PFC technology & battery management
• Two step charging
• Off mode charging, Fan speed automatically changes as load varies

• Dishant Electronics manufactures high quality power transformers with minimum losses and high power savings
• Out Control Transformers are designed to use at various applications like step-down, step-up and low voltages, with various secondary tappings
• Our range of transformers includes from 0.25KVA to 5KVA

TThe CVT uses the unique principle of ferroresonance: operation of a transformer in the region of magnetic saturation. When the iron core of a transformer is in saturation, relatively large changes in winding current results in very small changes in magnetic flux. Winding current and magnetic flux are proportional to the input and output voltage, respectively. This means that relatively large changes in input voltage result in small changes in output voltage: this being the fundamental purpose of an automatic voltage regulator.

The ferroresonant action is a flux limiter rather than a voltage regulator, but with a fixed supply frequency it can maintain an almost constant average output voltage even as the input voltage varies widely. Dishant Electronics makes wide range of CVT including various features at very competitive rate.

FEATURE

Manual:Our one of the oldest & most competitive product is manual stabilizer. It gives options to set required output voltage according to application requirement. Likewise automatic, these are also available in different design according to KVA rating.

Wall Mounting:Wall mounting stabilizers based on DSP technology are outlined to simplify your selection. They are much smaller and lighter enabling high efficiency operation. DEL gives you most powerful and highly integrated with hundreds of combination possibilities, suitable for most applications.

It is seen that In spite of best efforts by various Electricity Boards / Supply undertakings the voltage at consumer's end is never constant. The reason being diverse loading duties arising in transmissions and distribution network. During the day time when the load requirements is more the voltage remains quite low and during night it goes up than the normal. As a result of these never ending voltage fluctuations there is frequent Tripping / Breakdown of the systems / machines and precious equipment's resulting into low production. To overcome and control these voltage fluctuations and to provide desired constant output voltages, Single Phase Servo Stabilizer gets used.

These types of Servo Stabilizers and power controllers essentially employ a Solid-State circuit, which controls the Servo Motor. The motor is mechanically coupled to the arm of a continuously variable Auto Transformer that feeds to the primary of a series control Buck-Boost transformer. The stabilizer / regulator output voltage is then compared with the reference voltage and the resultant error signal controls the Servo Motor providing true proportional control systems rather than On/off circuits.

Our Single Phase Servo Voltage Stabilizer are available in a vast choice of Input and Output Voltage range suitable for various applications in industries, institutions and residences etc. having indigenous, imported sophisticated machines / instrument / gadgets etc. We design and develop as per the specifications of our clients, these air cooled servo voltage stabilizer are qualitatively advanced and known for outstanding performance.

Our Inverter ensures

• Higher end Micro-Controller based design
• A unique and advanced technology that protects the Battery, reduces frequency of water topping and enhances Battery life
• User selectable heavy duty charger option that charges the battery 40% faster than as compared to ordinary models
• High surge handling capability (up to 300%)
• Cold start capable
• Intelligent thermal management
• Overload and short circuit protection with auto reset
• Battery pole reversal protection
• User-friendly graphical display with audible alerts
• Space saver - ideal for modern day households

Detail

Our All Power Saver can save power for all appliances except for purely resistor appliances. It is effective for all other appliances but is most effective for induction appliances like AC, Refrigerator, Washing Machine, Fan, TV, Tube Lights, Water Pumps, Freezer, Mixer Grinders and all types of single phase motors etc. It is also efficient for other electrical appliances to a certain extent. Overall, the longer they are used, better the effect will be.

Technology

All Power Saver uses a state of the art electrical technology to monitor and improve the power factor of your household/office appliances. Additionally, its intelligent technology optimizes the voltage and current demand, thus reducing the active power/KWH demand and achieves 10-30% saving on your electricity bill. It also serve as a voltage stabilizer by storing energy for up to 10 seconds and therefore supplies the load with constant voltage during momentary power surges. This in turn results in longer life span of your electrical appliances.

Features

• Power saving up to 30%
• Improves Power Factor
• Prolongs life of appliances
• Best suited for inductive load
• Sort payback period
• Fully compliant with safety standard

Features