Other Products / Services #5927810

Half or Waist height Electro Mechanical Tripods are ideally suitable for high throughput productss where in a strong & sturdy access restriction is required. It offers a nice & slim design occupying minimal footprint thus making it ideal for lobby entrances. It can be customised & comes in various configurations as per site requirements. The strong, sturdy & reliable mechanism makes it ideal for various productss where low to mid-level security is permissible. Cheapest tripod rental basis tripod on rent in Mumbai, India in comfortable process and easy manner to full fill your requirement without too much expenses.

Electro Mechanical Tripod, also called a baffle gate, is a form of gate which allows one person to pass at a time. It can also be made so as to enforce one-way traffic of people, and in addition, it can restrict passage only to people who insert a coin, a ticket, a pass, or similar. Thus a Electro Mechanical Tripod can be used in the case of paid access (sometimes called a faregate when used for this purpose), for example public transport as a ticket barrier or a pay toilet, or to restrict access to authorized people, for example in the of an office building . Electro Mechanical Tripods are used at a wide variety of settings, including stadiums, amusement parks, mass transit stations, office lobbies, airports, ski resorts, and casinos.

From a business/revenue standpoint, Electro Mechanical Tripods give an accurate, verifiable count of attendance. From a security standpoint, they lead patrons to enter single-file, so security personnel have a clear view of each patron. This enables security to efficiently isolate potential trouble or to confiscate any prohibited materials. This Gates can also be used to track people inside a premise and hence help trace and rescue all of them based on count available, out of the premises in case of fire or other calamities and therefore become a serious aid when a speedy evacuation is needed. Persons with disabilities may have difficulties using tripods. In these cases, generally a wide aisle gate, generally a P Type Swing Gate or a Telescopic Flap Barrier or a manual gate may be provided. A line of tripods may be entirely formed along with wide aisle gate, generally a P Type Swing Gate with luggage conveyor belts placed in between this line of tripods to allow mass transit and people with luggage. A typical usage of Access/ticketing tripod is that :: The user inserts a ticket or pass into the slot, from which a barcode is read; if access is to be granted, a sensor or a set of sensors tracks the person passing through the gate and allows the rotation of the tripod Rotor Arms and complete the transaction. Sometimes also referred to as "half-height" tripods, this fixed arm style has traditionally been the most popular type of tripod. There are many variations of this style available, including one which is designed to be accompanied by a matching ticket box, and one with a ticket box built in.

Some styles are designed to allow entry only after a payment (actual coins and tokens) are inserted, while others allow access after a valid barcode is electronically read and also a variation to the electro mechanical tripod ismotorized tripodin which the sensors detect the person passing through the motorised tripod and sets the electric motor to turn the tripod at the corresponding speed.

These Tripod are very Well made in India.

Tripod are designed, developed and manufactured in India.

Tripod are CE Certified and meets hence International Standard.

As its name implies, a sliding door slides on from left to right or right to left. Sliding door single leaf are commonly installed at the top of the door. The mechanism is designed as such which ensures a quiet & noiseless operations. The operator is equipped with logic controller thus providing the flexibility of various logic which can be built in. Suitable safety devices can also be attached making them suitable for commercial use.

As its name implies, a sliding door slides on from left to right or right to left. Sliding door double leaf are commonly installed at the top of the door. The mechanism is designed as such which ensures a quiet & noiseless operations. The operator is equipped with logic controller thus providing the flexibility of various logic which can be built in. Suitable safety devices can also be attached making them suitable for commercial use.

Automatic sliding door slides on from left to right or right to left respectively. Automatic sliding door with telescopic are commonly installed as per the suggestions and convince. Mechanism are designed as such which ensures a quiet & noiseless operations. Operators are equipped with logic controllers thus providing the flexibility of various logic which can be built in. Suitable safety devices can also be attached making them suitable for commercial use.

As its name implies, a sliding gate either slides on wheels from left to right or right to left. Sliding gate operators are commonly installed at the end of the gate in the closed position but can also be installed by the end of the gate in the open position. A metallic rack is attached to the gate with a gear fitted to the operator. This ensures a quieter and more secure system. The operator is equipped with logic controller thus providing the flexibility of various logics which can be built in. Sliding gates are often large, heavy and therefore a heavy duty operator is designed due to its operational environment. Suitable safety devices can also be attached making them suitable for both industrial & residential use. Motorized Sliding Gate, Automatic Sliding Gate, Sliding Gate Operators, Multi Door Controllers manufacturers and suppliers in Mumbai, India to entire world with assure safety and security.

A gate operator is a mechanical device used to open and close a gate, such as one at the end of a driveway. There are two main types of electric gate openers hydraulic or electromechanical; these can be further split into the following categories, worm (or screw) driven, arm openers, underground openers and Roller Wheel Type Openers. Automatic and Electric Gate operators are designed for both swinging and sliding gates. They can be programmed to open and close with a wireless transmitter or a manual device. Low Voltage Automatic Gate openers can also be fitted with solar panels to ensure function during loss of electricity or blackouts.

Operator Types:

Mechanical

Operators generally draws power from the mains to open a driveway. Generally there are four types of electromechanical gate operator: Worm driven (or screw type) swing gates, barrier arm operators and sliding operators Electric and automatic gate openers are designed for both sliding and swinging gates. They can be programmed to open with a manual device or a wireless transmitter. Automatic gate operators can also be fitted with solar panels to operate without high voltage power. Battery backup can also be either integrated or as an add on to systems that ensure function during loss of electricity.

Hydraulic

As the name implies they use hydraulic fluids to operate their motion. Typically hydraulic operators have less moving parts than mechanical operators. The hydraulic motors have a number of advantages when operating gates: they are capable of producing more power than mechanical motors for heavy sized barriers and do not have to work at full power when operating large gates. Drawbacks of using hydraulic operated barriers are caused because of the technology itself, being under pressure, they tend to be harder to handle and less safe. Maintenance also is very critical in these types of operators.

These Sliding Gate are very Well made in India.

Sliding Gate are designed, developed and manufactured in India.

Sliding Gate are CE Certified and meets hence International Standard.

RFID is a generic term for technologies that use radio waves to automatically identify people or objects. There are several methods of identification, but the most common is to store a serial number that identifies a person or object, and perhaps other information, on a microchip that is attached to an antenna (the chip and the antenna together are called an RFID transponder or an RFID tag). The antenna enables the chip to transmit the identification information to a reader. The reader converts the radio waves reflected back from the RFID tag into digital information that can then be passed on to computers that can make use of it.

An RFID system consists of a tag, which is made up of a microchip with an antenna, and an interrogator or reader with an antenna. The reader sends out electromagnetic waves. The tag antenna is tuned to receive these waves. A passive RFID tag draws power from field created by the reader and uses it to power the microchip's circuits. The chip then modulates the waves that the tag sends back to the reader and the reader converts the new waves into digital data.

The big difference between bar codes and RFID is that bar codes are line-of-sight technology. That is, a scanner has to "see" the bar code to read it, which means people usually have to orient the bar code towards a scanner for it to be read. Radio frequency identification, by contrast, doesn't require line of sight. RFID tags can be read as long as they are within range of a reader. Bar codes have other shortcomings as well. If a label is ripped, soiled or falls off, there is no way to scan the item. And standard bar codes identify only the manufacturer and product, not the unique item. The bar code on one milk carton is the same as every other, making it impossible to identify which one might pass its expiration date first.

Microchips in RFID tags can be read-write or read-only. With read-write chips, you can add information to the tag or write over existing information when the tag is within range of a reader, or interrogator. Read-write tags usually have a serial number that can't be written over. Additional blocks of data can be used to store additional information about the items the tag is attached to. Some read-only microchips have information stored on them during the manufacturing process. The information on such chips can never been changed. Other tags can have a serial number written to it once and then that information can't be overwritten later.

Biometrics is the technology or discipline that recognized a persons biological and behavioural characteristics, there by verifying the identity of the corresponding individual. A more restricted definition of biometrics refers of the science designed to enable a machine to analyze a person's biological and behavarioul traits for the verification of his or her identity.Divya's readers are innovative biometric fingerprint reader for Time & Attendance and Access Control productss, offering unparalleled performance using an advanced algorithm for reliability, precision and excellent matching speed.

These Biometric are very Well made in India.

Biometric are designed, developed and manufactured in India.

Biometric are CE Certified and meets hence International Standard.

Triumph's Continuous Emission Monitoring System with Advanced Micro Controller Based Design ensures you Industry Leading Features and Specifications with Easy View Display and Early Alarm Warning to keep your Pollution Emission levels under check.

Built-In Data Logger and Software will Definitely help you Monitor Production Loss, Online Dust Monitoring, Protecting Vacuum Pumps from Filter Bag Tear, Energy Saving in EPS's, Detection of Broken Bag Filters, Checks Healthiness of Water Scrubber and Multi Cyclone and Analyse your Emission to better standards for compliance with Pollution Control Board and Environment Norms.

• Micro Processor Based State of Art Design
• Local / Remote monitoring and operations
• Auto ranging
• Auto Power ON / OFF with last Valid State
• P.C. interface for Monitoring and Operation
• Pump ON-TIME measurement
• Short Circuit & Thermal Protection

Controller Unit housing the state of art Micro controller card, triac control cards, display cards, and biasing transformer with feedback voltage and current transformers. This unit has all the controls and it is placed in the instrument gallery.

Transformer Unit housing the two step-down transformers and it is placed in the tunnel near to the filaments.

This dual unit design allows user to place the high current drawing transformers in the Transformer (Auxillary) Unit closer to the TiSP feed through hence drastically reducing the voltage drops over long distances compared to conventional single unit Controller when placed in Control/Instrument room/gallery.