My ExportersIndia

For Buyer

For Seller

For Help

D M Instruments
gstGST : 24AWPPP7720F1ZB Write a Review

Our Products

  1. Laboratory Equipments 4 Products available
  2. Laboratory Apparatus 3 Products available
  3. Drying Ovens 3 Products available
  4. Laboratory Ovens 2 Products available
  5. Lab Instrument 2 Products available
  6. Autoclaves 2 Products available
  7. Dryers 1 Products available
  8. Industrial Ovens 1 Products available
  9. Sterilizers 1 Products available
  10. Testing Equipment 1 Products available
  11. Testing Equipments 1 Products available
  12. Surveying Instruments 1 Products available
  13. Laboratory Shakers 1 Products available
  14. Viscosity Instruments 1 Products available
  15. Industrial Ovens & Furnaces 1 Products available
  16. Cupboard 1 Products available
  17. Others Products 56 Products available

Our Products

Our offered Product range includes CHILLER AND DEEP FREEZER, SOLDERING BATH OR POT, Slump Flow Test Apparatus, Hot Water Bath and Oil Bath High Temp.

Hot Water Bath

  • Shape ROUND /SQUARE /RECTANGLE
  • Number Of Flower DIGITAL WITH STIRRER MOTOR
  • MAXIMUM TEMP 200C
View Complete Details

ROUND VACUUM OVEN

  • Phase 230 V
  • Phase 230 V /440V
  • INNER S.S 2 MM CHAMBER
  • OUTER M.S 1 MM OR S.S
  • TEMP.RANGE 40 TO 250 C
  • CHAMBER ROUND DIA -30 /35 X DEPTH-30/35 MM
  • HEATER 2 KW POWER
  • DOOR GLASS WINDOW (150MM DIA )
  • GAUGE VACUUM GAUGE
  • INNER S.S 5 MM CHAMBER
  • CHAMBER 35 X 35 X 35 CM (45 X45X45CM ) (L X W X H )
  • HEATER 3 KW POWER
View Complete Details

Oil Bath High Temp

  • Size as per requrements. (30mm to 1000 mm)
  • Power 3 kw to 30 kw
  • Material inner s.s 304 /outer M.S Power coating
  • Temp 40c to 250c
  • capacity as per order (10 to 1000 ltr)
  • use plastic and laboratory
  • Strirrer With oil pump (15 ltr to 100 ltr)
  • insulatiion 100 mm
  • volt 230 and 440v single and three phase .
  • Mains MCB
  • Lock Air tight lock
View Complete Details

Universal Automatic Compaction Apparatus

  • Material Mild Steel
  • volume 150 mm dia X 127.3 mm high X 2250cc
View Complete Details

Cone Penetrometer

  • Ground Glass 10mm thick and about 45 cm square or larger rough glass as per IS 2720 (Part V-1985) for mixing soil and water
  • Spatula Flexible with blade about 8 cm long and 2 cm wide made from stainless steel material as per IS:2720 (part V-1985)
  • Evaporating dish Made from porcelain material having diameter of about 12 to 15 cm with smooth surface as per IS 2720 (part V-1985)
View Complete Details

Fine Sieves

  • Material Brass & s.s
  • Diameter 20 cm / 8″
  • Standard BSI / ASTM / IS
View Complete Details

Swell Test Apparatus

  • Dial Gauge 0.01mm x 25mm travel.
  • One spacer 100mm dia X 12.7mm thick
  • One Gun metal mould 100mm dia x 127.3 cm height X 1000 cc
View Complete Details

Flash Sterilizers And Rapid Sterilizer

  • Certification CE Marked
  • Power AC 220V / 50Hz
  • Features Portable design for low bench space, 5 to 20 liters of chamber capacities, No specific installation required, Simple to use, just plug and operate, Aluminum or stainless steel construction, Fast sterilization approx. 20 min, Over pressure protection
  • Operating Pressure 15 PSI / 18 PSI
  • Sterilization Time 1 to 0.99 Minutes
  • Construction 304 Grade Stainless Steel / Aluminum
  • Heating Electric Heating, Optional Non-electric (Gas)
  • Safety CE Marked Pressure Valves, Lid Locks, Steam & vacuum release valve

Model DM-1 DM-2 DM-3 DM-4
Capacity (Liters) 5 Liters 10 Liters 15 Liters 20 Liters
View Complete Details

Laminar Air Flow Cabinet

  • Noise Level 65 decibel +/- 5%
  • Direction of flow Horizontal
  • Cleanliness CLASS 100
  • Velocity 90 FPM +/- 20%
  • Hepa Filter Size and quantity will depend on the size selected
  • Particle retention Above 0.3 micron
  • Blower Assembly 1/3 HP, 1440 RPM
  • Rate of air flow 0.40 to 0.75 M/Sec (90 FPM)
  • Vibration level < 2.5 micron
View Complete Details

Slide Warming Table

  • TEMP 37 TO 60 C
  • MATERIAL S.S BODY WITH S.S PLATE
  • DIGITAL TEMP .CONTROLLER : ACCURACY (+-0.1C)
View Complete Details

CHILLER AND DEEP FREEZER

  • Purity Interior fabricated from high grade stainless steel (S.S.304).Minaral polish, Exterior body made of Mild steel material – which is duly powder coated in attractive shades, Electrical wiring as per CE Compliances, Cord wire duly tested and inspected with st
  • BRAND  DM (INDIA)
  • MODEL  DM 999
View Complete Details

Dry Bath Incubator

  • Material INNER COPPER CHAMBER
  • Number Of Flower DIGITAL TEMP.CONTROLLER
  • Application USE FOR LABORATORY
  • HEATING BLOCK ALLUMINIUM BLOCK 10/12/15 MM TUBE SIZE HOLD
  • FINISHING OUTER M.S WITH POWDER COATING
View Complete Details

Jaw Crusher

  • Max Size of feed 50mm (approximately) Product discharge
  • Size of feed 6mm to 18mm (adjustable)
  • Capacity 80kG/hr (approximately – based on material)
  • Operation On 440 volt, 3 Phase, 50hz, A.C. supply with 3H.P.
  • Electric motor motor, a starter ‘ v ‘ belt pulley drive and mounting
View Complete Details

Cylindrical Metal Measure

  • Specification Made from thick walled Mild steel or cast aluminum. Stout and rigid to retain form and Precision machined for true measurements. Complete with handles for easy carriage. It comprises of set of two measures 20 litres & 10 litres.
  • Relevant Standards  IS 1199, IS 10079, BS 1881
View Complete Details

Aggregate Crushing Value Apparatus

  • Cylinderical Metal measure 11.5cm dia x 18cm height with handle.
  • Electronic Balance 3 kg. X 1 gm
  • Compression Testing Machine Capacity 500 kN
  • Test Sieve 2.36mm, 10mm, 12.5mm and 14m
View Complete Details

Sieve Shaker

  • Digital Time switch 0-99 minutes for above
  • Mechanical Time switch 0-60 minutes for above
  • Suitable for operation from 220 Volts 50 cycles A.C. supply
View Complete Details

Density Basket

  • Electronic Balance capacity 5 kg x 0.5gm / 5 kg x 0.1 gm with under bench weighing facility.
  • Specification 20cm dia x 20cm high fitted, galvanized wire mesh of 6.3mm handle for suspending it from the balance
View Complete Details

BENKELMAN BEEM APPARATUS

  • Dial Gauge 0.01 x 25mm., Spirit Level.
  • Benkelman Beam : Beam Ratio 2 : 1
  • Length of the probe arm from pivot to probe point 244cm.
  • Length of measurement arm from pivot to dial 122 cm.
  • Distance form pivot to front legs 25cm.
  • Distance from pivot to rear legs 166cm
  • Lateral spacing of front support legs 33cm
View Complete Details

Tar Viscometer

  • Suitable to operate 220 V.50 Hz, AC single phase.
  • consist of bath with cup 10 mm or 4 mm
View Complete Details

MARSHALL COMPRESSION TESTER

  • Marshal Moulds  4”dia X 3” height specimen moulds, base plates and Extension collar. Manufactured from steel.(6“ dia mould can be supplied at extra cost)
  • Compaction Pedestal Comprising of a hard wood block with a steel plate, complete with specimen holder, semi circular base and a circular top to hold 4” dia specimen mould in place during compaction of the specimen. (Pedestal to accommodate 6” dia specimen can be supplied
  • Compaction Hammer (2 Nos.) Designed for use with the compaction pedestal and mould. The hammer has a falling weight of 4.535 kg and free fall of 457 mm.
  • Breaking Head Assembly Consisting of upper and lower cylindrical segments with provision for fixing flow meter. Suitable to take 4” dia specimens. ( Assembly to accommodate 6” dia specimen can be supplied at extra cost)
  • Specimen Extractor Consisting of a load transfer bar, pressure plate and steel ball
.
View Complete Details

Concrete Permebility

  • Specifications The set up consist of permeability cell, water reservoir and pressure lines, with glass bottles.
  • Permeability Cell Consists of a metal cylinder with a ledge at the bottom for retaining the specimen, a flange at the top, removable cover plate and a funnel. A rubber gasket is seated in matching grooves, between the cell and the cover plate, to render the joint water tig
  • Water Reservoir Consists of a length of metal pipe, 50 to 100 mm in diameter and about 500 mm long. The reservoir fitted with a graduated side arm gauge-glass for admitting water and compressed air and a cock for drainage, bleeding and connection to the permeability cell
  • specimen size  100 X 100 mm
  • Pressure Lines Heavy duty armored rubber hose with end fittings. Complete with glass bottles but without compressor
  • Concrete permeability tester for three specimen (100mm dia x 100mm height) or (150mm dia x 150mm height) or (150mm cube) is also available.
View Complete Details

Rebound Test Hammer

  • compressive strengths 100-700Kg/cm
  • specification piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent
View Complete Details

Slump Flow Test Appaaratus

  • Material M.S /s.s
  • Tray 900 x 900 or 1000 X 1000 MM (L X W)
  • Slump cone 200 x 100 x 300 MM (D1 x d2 X H)
  • Stand 1/2 FT With stand
  • TRAY SIZE 700X 700 MM
  • CONE 100 X200X130 MM
View Complete Details

Concrete Mixer

  • Drum Capacity 3 cubic feet approximately
  • Motor Power 0.5 HP single Phase AC Supply / Hand operation
  • Drum material Cast Iron or mild steel
  • Mixer Capacity 2 cubic feet approximately
  • Drum Rotation 20-22
View Complete Details

Vacuum Oven

  • Construction Double walled
  • Outer Chamber CRC sheet stove enamelled
  • Inner Chamber Stainless steel (AISI-304)
  • Door Made of steel with glass window in centre
  • Temperature 50°C to 150°C
  • Temp. Control By sensitive thermostate
  • Standard Supply Vacuum gauge, vacuum release valve, a removable shelf (S.S.) but without Vacuum pump
  • Operation 220/230 V AC Single phase
View Complete Details

Heating Mentle

  • Capacity 50ml, 100ml, 250ml, 500ml, 1 Liter, 2 Liter, 3 Liter, 5 Liter, 10 Liter, 20 Liter, 50 Liter, 100 Liter, 200 Liter.
  • Maximum Temp 450° C.
View Complete Details

Horizontal Autoclave

  • Brand Name DM (INDIA)
  • MODEL NO DM 909
  • Working Temperature 121 deg.C
  • Working Pressure 1.26 Kgf/cm2 (15 psi)
  • Hydro Test Pressure 2.5 Kgf/cm2 (35 psi)

Working Chamber

Size Volume Load (KW)

400 x 600 mm

78 Ltrs

6 KW

500 x 900 mm

135 Ltrs

10 KW

550 x 750 mm

152 Ltrs

9 KW

400 x 1100mm

162 Ltrs

12 KW

500 x 1200mm

185 Ltrs

12 KW

600 x 1200mm

300 Ltrs

18 KW

750 x 1200mm

525 Ltrs

18 KW





















View Complete Details

Inspissator

  • Temperature Range 5°C above ambient to 60°C ± 1°C
  • Humidity Range from atmospheric humidity 90%
  • Chamber Size(cm) (H x W x D) Cu. Trays Ft.
  • 45 X 45 X 45 3
  • 71 X 45 X 45 6
  • 90 X 60 X 60 12
View Complete Details

K V Bath

  • Control accuracy ± 0.1°C. Below
  • Temperature Range 10°C to 100°C

Size No.

App. Const (cSt/s)

Kin. Viscosity

Range (cSt)

4

0.1

6 to 100

5

0.3

18 to 300

6

1.0

60 to 1000

7

3.0

180 to 3000

8

10

600 to 10000

9

30

1800 to 30000

10

100

6000 to 100000

11

300

18000 to 300000

Size No.

App. Const (cSt/s)

Kin. Viscosity

Range (cSt)

150

0.035

2.1 to 35

200

0.1

6 to 100

300

0.25

15 to 200

350

0.5

30 to 500

400

1.2

72 to 1200

450

2.5

150 to 2500

500

8

480 to 8000

600

20

1200 to 20000

 

View Complete Details

Magnetic Stirrer With Hot Plate

  • Body Material Stainless steel body
  • Finishing S. S./epoxy coated top plate
View Complete Details

Rectangular Hot Plate

  • Top plate size (mm): 25 X 30, 25 X 40, 30 X 50, 45 X 60
  • Special Note The top plate of hot-plate will be heavily casted in C.I. or in S.S. and will not be fabricated from M.S. plate or S.S. plate.
View Complete Details

Dial Thermometer

  • Stem length 12″ approx.
  • Range 0-200 or 0-300° C
View Complete Details

Bod Incubator

  • Standard Model Interior Cabinet all S.S. LM 304 grade. Exterior Cabinet powder coated metal.
  • Accuracy +/- 0.2°C
  • Uniformity +/-1°C
  • Display / Control Digital Temperature Control Resolution : 0.1°C, Accuracy +/-0.1°C
  • Refrigeration CFC Free Compressors Utilizing R134a eco-friendly refrigerant.
  • Observation Inner Transparent glass / Acrylic Door & Outer door key lockable.
  • Feet Castor wheels / adjustable leveling guides
  • Electrical 230 V / 15A / 50 Hz
View Complete Details

Vacuum Pump

  • Free Air Displacement Ltr/Min MotorHP
  • 50 0.25
  • 100 0.25/0.50
  • 150 0.50/1.00

Motor Capacity Max. Vacuum Weight
1/3 HP 40 LPM 22.5(IN HG.) 7.2 kg.
1/3 HP 50 LPM 28.0(IN HG.) 9.0 kg.
View Complete Details

UVC Disinfection System

  • Wavelength 260-280nm
  • Input interface Type-C USB7
  • UVC LED Life 10000 hours
  • Dimension 10 X8X6 inch
View Complete Details

Torsion Testing Machine

  • Capacity 0 to 50 kgm.
  • Range ONE
  • Rod to be tested 8 to 20 mm.
  • Load of Measurement Torque and Twist will be read directly.
  • Other provisions Automatic stop in case of failure of specimen.
View Complete Details

Surface Abrasion Testing Machine

  • Eccentricity of axis of rotation of the disc 22.5 mm
  • Speed of rotation of disc 300 ± 10 rpm
  • Max no of test specimens tested at a time 4 no
  • Inside dia of specimen holding ring 83 mm
  • Inside height of specimen holding ring 25.5mm
  • Dist of center of test area from cent of disc 195 mm
  • Electric Motor 1/4 HP, Single-phase, 230 Volts, AC
  • Electronic Counter 4 digits pre-set type electronic counter with memory back up and key-lock reset.
  • Features Easy to use and with rugged construction, Electronically controlled RPM Indications, Mild steel structure body with powder coating paint
View Complete Details

Plastic Dessicator

  • Applications For cooling of heated objects, To store the dry object, To remove moisture content from almost dry sample
  • Details Made of Neutral glass/Plastic, Fitted With knobbed lid, Supplied with porcelain perforated plate
View Complete Details

Rapid Pot Mill -Double Jar

  • Features Aesthetical exterior appearance, Unique and self contained design, Mild steel structure, which is powder coated in attractive shades, Safe, Quiet & smooth operation
  • Built in timer 0 – 100 Minutes
  • Rpm 20- 400 RPM to achieve variable speeds
  • RPM Display Digital RPM Display
  • Jar capacity 300 CC
  • No. of Jars 02 Nos
  • Power supply 230 Volts, 50 Hz, 1ph, AC Supply
  • Power consumption 1/3 Hp
  • Weight 130 Kg
View Complete Details

Tiles Autoclave

  • Purpose To determine the crazing resistance of glazed tiles
  • Dimension Can Accommodate Tile Sizes
  • 250mm Diameter x 300mm Depth 8 x 12”
  • 350mm Diameter x 450mm Depth 12” x 16”
  • 450mm Diameter x 550mm Depth 16” x 20”
  • 500mm Diameter x 750mm Depth 18” x 28”
  • Features Triple safety against accidental over pressure., Safety Valve / Pressure control switch/ Digital Temp. indicator cum controller, Design to work and withstand with 750 ± 20 kpa., Simple in design and operation, Easy heater replacement
View Complete Details

Impact Test

  • Body structure Fabricated from mild steel material
  • Paint Powder coating
  • Steel ball diameters Chrome steel ball Ø 19 ± 0, 05 mm
  • Free fall height of the balls 1 meter
  • Electrical Timing Device To measure the interval between 1st and 2nd impact
  • Controller reading Direct reading in co-efficient of restitution
  • Power Supply 230 Volts, Single phase, AC Supply
  • Applications Instrument for the determination of the resistance to the impact of the ceramic tiles. Determination of the coefficient of restitution by dropping a steel ball from a fixed height onto the test specimen and measuring the height of rebound.
View Complete Details

SOLDERING BATH OR POT

12,500 - 16,500 / Number Get Latest Price
  • Size 12x8Inch, 14x12Inch, 15x10Inch, 10X12
  • Number Of Flower S.S AND BRASS
  • Material SOLDER
  • Shape Rectangular, Round, Square
  • Storage Condition Antique
  • Application SOLDER USE
  • Feature Fine Finish
  • Finishing Polished
  • Country of Origin India
  • Brand Name DM
  • Certification DM-CP-103
  • Usage SOLDER
  • Name SOLDER BATH
  • Thickness 2 MM

SOLDRING BATH
INNER S.S OUTER M.S
TEMP 250C
SIZE : AS PER REQ.
DIGITAL TEMP CONTROLLER
LOCAL MADE

View Complete Details

Compacting Factor Apparatus

20,000 / Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece
  • Availability 50 KG
  • Material MS
  • Automation Grade Manual
  • Usage/Application LABORATORY CONCRETE
  • Diameter 16 mm
  • Model Name/Number DM
  • Thickness 6.5 - 9 mm
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us