Our Products
Excellent combination of materials
Structure is selected to form a universal ball joint of small diameter
Movement at 360 angle
Supporting base can be divided into rotary supporting base
Fixed supporting base according to locating mode
Two pressing mode : Negative pressure feet and positive pressure feet
Rotating male luer provides convenient and fast connection.
Transparent cylinder enhances visual efficiency of gauge mark and contrast.
Special designed silicon piston head and lubricating technology allows plunger to move easily in cylinder against high pressure resistance.
Thumb and finger rings help precise dose control
Coloured syringe in all colour.
Features
Order Information
Dr Surgical epidural kit features kink and crush resistant design.
Dr surgical manufactured epidural kits use for regional anesthesia.
Epidural kit radiopaque for very fine placement under x ray.
Tapered stylet for easy placement and patient comfort.
Epidural needle (tuohy needle), 16/18g*80mm
Spinal Needle : 25G*90mm,
Spinal Needle : 25G*110mm, pencil point
Epidural cathter: Multiport with mark 0.8/1.0mm>850mm
Epidural Filter: 0.22um, hydrophobic membrane.Luer lock
LOR syringe, 7ml, 10ml available
Catheter Adaptor: TBA, secure the catheter completely.
Features
Dr. Surgical develops and markets leads with fixed curvature for temporary cardiac stimulation and electrophysiology, with a particular attention to the choice of materials.
The range of intravenous temporary pacing and diagnostic leads are made up of following families:
DR-SPIKE ULTRA : lead with braided shaft and soft tip, for EP studies
DR-SPIKE EASY : lead with fully braided shaft, for EP studies
DR-SPIKE LC S : lead is not braided for temporary pacing
DR-SPIKE FLOW: balloon lead, for temporary emergency pacing
Each family includes a wide range of models.Models are differenciated by material of electrodes, inter electrode distance, curvature, size and connection.
The choice of material arises from the evaluation of the unique chemical and physical characteristics if this peculiar thermoplastic polymer and from the resulting performance allows a high flexibility along with high kink resistance.
The electrodes are in platinum iridium or in platinum iridium or in stainless steel: both materials ensure an excellent quality of the sensing and pacing signals.
Renovaspine is a minimally invasive system to stabilize the fracture, restore vertebral body and reduce back pain.
A vertebral compression fracture (vcf) occurs when the vertebral body fractures and collapses due to ostheoprosis (bones break easily) or tumours (ex. myeloma) with our specific instrument the specialist enters and creates a cavity in order to restore the normal vertebral body position consequently the ballon is deflated and the cavity (created from the ballon) is filled with cement. In the way the vertebral body is stabilized in its normal and correct position.
Reduction in the back pain
Improvement in daily physical activity.
Reduced profile of cannula and balloon
No instrument charge : direct percutaneous access to the bone and creation of the channel
Reducing procedure time (15 minutes less)
Less invasive less painful
Total invasive : small vertebral body
Thoracic cervical
Smaller working cannula diameter
Reduced profile of cannula and balloon
No instrument charge : direct percutaneous access to the bone and creation of the channel
Reducing procedure time (15 minutes less)
Less invasive less painful
Total invasive : small vertebral body
Thoracic cervical
The smallest working cannula avalailable on the market today.
3 cm flexible tip makes tip easy to deflect.
Elastic and shape-resistance distal core and lubricious coating provides great accessibility and excellent steerability.
Supportive proximal shaft increases pushability.
All size available in P.T.F.E. / hydrophilic Coated
Ref Number | Description | Ref Number | Description | Ref Number | Description |
---|---|---|---|---|---|
DR-UN-0.035” * 70cm J Tip | 3 cm flexible J Tip, uncoated wire. | DR-PT-0.035” * 70cm J Tip | 3 cm flexible J Tip, PTFE coated. | DR-HY-0.035” * 70cm J Tip | 3 cm flexible J Tip, Hydrophilic coated. |
DR-UN-0.035” * 70cm S Tip | 3 cm flexible S Tip, uncoated wire. | DR-PT-0.035” * 70cm S Tip | 3 cm flexible S Tip, PTFE coated. | DR- HY -0.035” * 70cm S Tip | 3 cm flexible S Tip, Hydrophilic coated. |
DR-UN-0.032” * 150cm J Tip | 3 cm flexible J Tip, uncoated wire. | DR-PT-0.032” * 150cm J Tip | 3 cm flexible J Tip, PTFE coated. | DR- HY -0.032” * 150cm J Tip | 3 cm flexible J Tip, Hydrophilic coated. |
DR-UN-0.032” * 150cm S Tip | 3 cm flexible S Tip, uncoated wire. | DR-PT-0.032” * 150cm S Tip | 3 cm flexible S Tip, PTFE coated. | DR- HY -0.032” * 150cm S Tip | 3 cm flexible S Tip, Hydrophilic coated. |
DR-UN-0.025” * 150cm J Tip | 3 cm flexible J Tip, uncoated wire. | DR-PT-0.025” * 150cm J Tip | 3 cm flexible J Tip, PTFE coated. | DR- HY -0.025” * 150cm J Tip | 3 cm flexible J Tip, Hydrophilic coated. |
DR-UN-0.035” * 70cm J Tip | 3 cm flexible S Tip, uncoated wire. | DR-PT-0.035” * 70cm J Tip | 3 cm flexible S Tip, PTFE coated. | DR- HY -0.035” * 70cm J Tip | 3 cm flexible S Tip, Hydrophilic coated. |
DR-UN-0.018” * 150cm J Tip | 3 cm flexible J Tip, uncoated wire. | DR-PT-0.018” * 150cm J Tip | 3 cm flexible J Tip, PTFE coated. | DR-HY-0.018” * 150cm J Tip | 3 cm flexible J Tip, Hydrophilic coated. |
DR-UN-0.018” * 150cm S Tip | 3 cm flexible S Tip, uncoated wire. | DR-PT-0.018” * 150cm S Tip | 3 cm flexible S Tip, PTFE coated. | DR-HY-0.018” * 150cm S Tip | 3 cm flexible S Tip, Hydrophilic coated. |
DR-UN-0.035” * 150cm J Tip | 3 cm flexible J Tip, uncoated wire. | DR-PT-0.035” * 150cm J Tip | 3 cm flexible J Tip, PTFE coated,0.035”(0.89mm) 150 cm | DR-HY-0.035” * 150cm J Tip | 3 cm flexible J Tip, Hydrophiliccoated,0.035”(0.89mm) 150 cm |
DR-UN-0.035” * 150cm S Tip | 3 cm flexible Straight Tip, uncoated wire. | DR-PT-0.035” * 150cm S Tip | 3 cm flexible Straight Tip, PTFE coated, 0.035”(0.89mm) 150 cm | DR-HY-0.035” * 150cm S Tip | 3 cm flexible Straight Tip, Hydrophilic coated, 0.035”(0.89mm) 150 cm |
DR-UN-0.035” * 260cm J Tip | 3 cm flexible J Tip, uncoated wire. | DR-PT-0.035” * 260cm J Tip | 3 cm flexible J Tip, PTFE coated, 0.035”(0.89mm) 260 cm | DR- HY-0.035” * 260cm J Tip | 3 cm flexible J Tip, Hydrophiliccoated, 0.035”(0.89mm) 260 cm |
DR-UN-0.038” * 150cm J Tip | 3 cm flexible J Tip, uncoated wire. | DR-PT-0.038” * 150cm J Tip | 3 cm flexible J Tip, PTFE coated. | DR-HY-0.038” * 150cm J Tip | 3 cm flexible J Tip, Hydrophilic coated. |
DR-UN-0.038” * 150cm S Tip | 3 cm flexible S Tip, uncoated wire. | DR-PT-0.038” * 150cm S Tip | 3 cm flexible S Tip, PTFE coated. | DR- HY -0.038” * 150cm S Tip | 3 cm flexible S Tip, Hydrophilic coated. |
DR-UN-0.038” * 260cm J Tip | 3 cm flexible J Tip, uncoated wire. | DR-PT-0.038” * 260cm J Tip | 3 cm flexible J Tip, PTFE coated. | DR- HY -0.038” * 260cm J Tip | 3 cm flexible J Tip, Hydrophilic coated. |
DR-UN-0.038” * 260cm S Tip | 3 cm flexible S Tip, uncoated wire. | DR-PT-0.038” * 260cm S Tip | 3 cm flexible J Tip, PTFE coated. | DR- HY -0.038” * 260cm S Tip | 3 cm flexible S Tip, Hydrophilic coated. |
Stainless needle is bevelled, back cut and siliconized for Smooth and painless venipuncture.
Each fistula needle is provided with a threaded stopper.
Sexure connection through standardized components.
Products are individually tested (100% test) for leak- tightness and resistance to pressure.
Roughened wings allow secure grip and control along with comfortable needle insertion.
Tested for toxicity and hemocompatability, and become softer in body temperature.
Specially made injection port helps in avoiding infection.
Available in single , double , triple lumen for infant and adult.
Packing compound packing tray and tyvek pouch.
Soft tip for easier insertion.
Pre Curved shaft automatically positions clamping extensions away from the patients head for comfort and ease of maintenance.
Requries extremely low insertion force.Increases accessibility and reduces tissue trauma.
Tapered hub inner diameter facilitates smooth insertion of the guide wire.
Adult/Pediatric size available.
Consistent and accurate readings during monitoring.
Components that simplify setup.
Transducer can be easily mounted on either the patients, bed or IV pole.
Fully integrated flow-thru component design simplifies filling and debubbing.
Superior fluid path visualization.
With a variety of interface cables available, can be connected to most types of monitors.
3cc or 30cc per hour flow rates.
Transducer provides consistent and accurate readings during invasive blood monitoring for central venous pressure, pulmonary arterial pressure, atria pressure etc. It is helpful for clinician in diagnosis, curing and prognosis.
These products allow for simultaneous perfusion of the aortic root and up to three or move vein grafts. Standard luer inlet port and colour clamps attached to an adapter which splits into four or more legs.
Rigid and non-braided PVC, kink resistant, fixed male luer rotating connector allows smooth flow.
Length-10, 25, 50, 100, 120, 150, 200, 300 cm.
Rotating male luer provides convenient and fast connection.
Customize sizes are available.
Dr. Surgical P.C.T.A Kits are designed to enhance an angiography and angioplasty Cath labs specifications in one complete sterile package.
These kits are offered in standard versions, but they also can be customized to customers needs.
Reduces setup time.
Reduces total procedure cost.
Reduces wastage in packaging and saves valuable space.
Reduces inventory.
Suitable for removal of secretion, blood, etc.
Complete Set is provided with the suction tip mounted on two meter long tube.
Ribbed soft medical grade P.V.C tubing.
Smooth flow in tube.
On/off switch on handle easy to use.
Ref Number | Description |
---|---|
DR-YSS-20FG | Yankur Suction Set with two meter tubing. |
DR-YSS-22FG | Yankur Suction Set with two meter tubing. |
DR-YSS-24FG | Yankur Suction with two meter tubing. |
DR-YSS-26FG | Yankur Suction Set with two meter tubing. |
DR-YSH-20FG | Yankur Suction Single Handle. |
DR-YSH-22FG | Yankur Suction Single Handle. |
DR-YSH-24FG | Yankur Suction Single Handle. |
DR-YSH-26FG | Yankur Suction Single Handle. |
Smooth-turning handles.
Large internal lumen (2.3mm diameter) for high flow rates.
All items are sterile.
Right /Left rotating male luer provides convenient and fast connection.
500 to 1200 psi pressure rating.
Lubricated and 360 / 180 rotating handles enhances smooth rotation.
Silicon knobs for smooth .
Ref Number | Description |
---|---|
DR-2M/R-ON | High Pressure Manifold 2 ports, Halfbody, On Handle. |
DR-2M/R-OFF | High Pressure Manifold 2 ports, Halfbody, Off Handle. |
DR-3M/R-ON | High Pressure Manifold 3 ports, Halfbody, On Handle. |
DR-3M/R-OFF | High Pressure Manifold 3 ports, Halfbody, Off Handle. |
DR-4M/R-ON | High Pressure Manifold 4 ports, Halfbody, On Handle. |
DR-4M/R-OFF | High Pressure Manifold 4 ports, Halfbody, Off Handle. |
DR-5M/R-ON | High Pressure Manifold 5 ports, Halfbody, On Handle. |
DR-5M/R-OFF | High Pressure Manifold 5 ports, Halfbody, Off Handle. |
Large inner lumens.
Smooth rotation.
Available in both High pressure and standard pressure capacity.
High Pressure Stop Cock to with stand up to 1000 psi
Standard Stop Cock to with stand up to 250 psi
Normal Stop Cock-30psi