Auto Feed Drilling Cum Milling Machine

Listing ID #279361

MD38BA - 38 mm cap Milling cum Drilling Machine with Auto feed & Fine feed.
Specification of Milling cum drilling machine:
• This machine offered by Prakash Mechanic Works is having 38 mm Drilling capacity & 20 mm End Milling
capacity.
• Machine is having one auto feed to enable the user for Boring, & Reaming also with auto stop facility.
• To give depth of cut in the job the machine is having fine feed facility also.
• The Spindle is made up of EN-8 material with internally ground MT-4 taper & 250 mm spindle travel.
• It is also having threading on the outer side to hold the collets holder.
• Machine can be made available with MT-4 E-40 collets holder.
• The machine is having cross table travel of 228 mm and longitudinal travel of 765 mm.
• The table can be swiveled 45° on left & right side.
• Machine is having helical steel gear.
Description MD38BA
Capacity Drilling capacity in M.S. 38
Rough Boring in M.S. 50
Tapping in M.S. 25
End milling in M.S. 25
Drilling Head Spindle hole Taper MT-4
Spindle Travel 250
No. Of Spindle Speed/Range 8/80-2600 RPM
Diameter Of Ram 78
Auto Feed Range ( mm x rev ) Fine Feed & 0.05 & 0.09
Collet Holder MT-4 / E 40
Working Range Max/Min Dist from nose to table 550/155
Dist. From Spindle Center To Coloum 305
Working table 815 x 250
Longitudinal travel 425
Cross travel 305
Column diameter 110
Machine measurement 1300 X 1170 X 1870
Power Electric Motors 2 HP / 1440 RPM
V-belt B-60