Other Products / Services #4493046

Shell & Tube Type Condenser is used to condense the vapor emerges out during the operation. It has been designed with tested raw materials to suit the capacity requirements. It mainly works through condensing the vapors flow through tubes where they are treated with cooling water over external surface. It is manufactured at our state-of-art manufacturing unit with the assistance of latest technology and machinery. High grade materials are used for fabricating this equipment.

Plate Heat Exchanger is the type of heat exchanger that acquires the use of high grade metal plates. It is uses to transfer heat between two fluids. Drycool is known to deliver high spectrum of this equipment that is known to meet international quality standards. We as a market leading company offers a plate pattern design for the convenience and match the specifications of our customers'.

Having the support of an expert team, we have successfully developed Refrigerated Air Dryers. These dryers worked on the principle of compressed air with saturated water vapor that enters the dryer's pre-cooling device. This air is cooled down with outgoing cold air, thus reducing the load of the system.

Adsorption dryers (Heatless) are designed with the consistent efforts of our professional team and the vast knowledge that they owe. These dryers works on a twin-tower alternative operation mode when the compressed air enters the dryers tower A through valve 1A. The air is then dehydrated and dried under the adsorption action of the adsorption use.

Air quality has a significant impact on the performance of compressed air dryers and properly filtered compressed air improves system efficiency, productivity and product or process quality. We have a wide range of filters for providing superior air quality to almost every compressed air application in the industry.

After Coolers are required in the industries for cooling the discharge come out from air compressor. For this purpose, either air or water is used proved to be an effective means of eliminating the moisture from compressed air. They are specially designed to control the level of water vapor through condensing them into liquid form.

Air Receivers are fabricated as the tanks required for compressed air storage. These are recommended in all compressed air systems as they are designed as the construction of unfired pressure vessels. Putting their whole efforts, our team members' uses reliable materials for its manufacturing that have been sourced from certified vendors.

We are specialized in offering Turnkey projects to our valuable clients. These are manufactured under the guidance of experienced and technical team who developed them to perform efficiently. We mainly take these projects for commissioning and installing both chilling plant and chilling water systems as well. Reliable materials are used to fabricate them that are procured from reliable source.

Drycool is engaged in designing Customized Fabrication as per the requirements of customers. Hold up with a team of experienced engineers and high end technologies with machines, we have followed the strict quality control routines to deliver accurate working equipments. They are highly demanded due to their high quality, durability and flawless operation. These are manufactured with precision using premium materials sourced from reliable vendors in the market.

We offer a white range of Dehumidifiers.Working on the same principle as a refrigerator, moisture-filled air is drawn into the dehumidifier and passed over a cold, refrigerated coil. The damp air condenses on the cold coil into water droplets which are collected in the water tank. The air is then passed over a warm coil and sent out from the dehumidifier, producing clean, dry air. In cold conditions, the water that is passed through the cold coil may freeze. So, it is important that a dehumidifier has an efficient way of coping with this. Mitsubishi Electric Oasis dehumidifiers utilize a hot gas defrost system, enabling hot gas to be transferred into the cold coil, reversing the freezing process. Without this, a dehumidifier would have relied on the temperature rising or employ a power drawing heating system. Upon first use, your dehumidifier will have to start to remove moisture that has accumulated in the wall linings, carpet, and furnishings. For this reason, it is important to run the dehumidifier constantly for the first few weeks. Once a healthy humidity level is reached, the dehumidifier can be used to simply maintain this.

The main function of Shell & Tube Type Evaporator is to act as a heat exchanger in a vessel form. This is mainly done to cool closed circuit for re-circulating fluid flow. This can be done with the help of refrigerants as a cooling medium. They are efficient in working and having compact design. The concept of the equipment is based on large number of tubes that can be formed into bundles. The refrigerants passed through the expansion device that passed into tubes and evaporates to produce a cooling effect.

Cold Room Panels are manufactured using prefabricated insulated panels. These panels allow convenient and accurate field assembly and future enlargement on the addition of further panels. The size of the panel only decides the entry in the proposed area without cutting or adjustment where possible. These are designed to meet the international hygiene and food hygiene standards.

Cold Room Refrigeration Equipments are innovatively designed with the assistance of the industry knowledge and experience. These are applicable where there is sufficient ventilation. The whole room is fitted with an on-board air cooled refrigeration system. This is capable of holding foodstuffs at the required temperature.

Complying with the international standards, we at our state-of-art manufacturing unit has designed Cold Room Doors. The panels that are used mainly allow convenient and accurate field assembly along with future enlargement on the addition of further panels. The panel size depends on the entrance of the proposed area without cutting or doing the adjustment.

We offer an excellent Cooling Tower Sprinkler in Cooling Towers to distribute the hot water uniformly over the PVC fills. These are specially designed to achieve maximum water sprinkling at the tip of nozzles with minimum pressure drop by gravity. Available in different sizes depending on the cooling tower, the spacing in between the nozzles is such that it covers the maximum area of tower.

Banking on our immense industrial experience, we developed and offer a huge range of PVC Fills. The designs of these are precisely manufactured under the firm observation of quality control department. This ensures even water distribution proffering high efficiency water to air heat transfer.

We have a wide range of Cooling Tower Sprinkler Fan in Cooling Towers that comprises of both axial as well as centrifugal models. The fans are integrated with advanced technology to offer significant energy savings and noiseless performance in cooling towers. Suitable for both indoor and outdoor installations, these fans provide maximum protection from fan icing with units operating in sub-freezing conditions.

Becoming the top most manufacturer and supplier, we are offering a range of Flange Motor. It readily meets the specifications of our clients and can be customized as per their requirements. Having the unique features, this motor is widely demanded globally. Our team uses high grade material procured from certified vendors available in the market.

In this write up, an energy-saving device is introduced into the air-handling unit (AHU). Due to increases in energy costs, energy saving devices or systems have become the new preferred trend in tropical countries. A primary cooling coil system is incorporated into the AHU to recycle the condensate water in order to achieve energy savings. The warm outside fresh air is drawn through the primary cooling coil to recover the latent heat of condensate water. The large temperature gradient between the warm fresh air and condensate water enlarges the amount of energy recovered. This system is well applicable to primary AHU which serves primary air to the air-conditioning system. The cost of installing the device is negligible but in returning long term saving. Furthermore, the de-cooled condensate water can be drained off through non-insulated drain pipe. The idea generation is discussed in the introduction. Chapters 2 and 3 describe the preliminary calculation of the energy saving percentage. Chapter 4 shows the detailed theoretical study of the development of the energy saving system. This shows the viability of the idea. Chapter 5 will recommend the design of the primary cooling coil configuration to achieve the desired cooling effect and energy saving strategy. Lastly, the conclusion of the whole study is presented.