Write a Review
Our Products
Our product range contains a wide range of Cement Bond Coat and Duco No 3
Dubond’s Hydrobuild SBR Latex is modified Styrene butadiene Rubber emulsion specially designed for use as a bonding agent. It is suitable as an admixture for obtaining waterproof concrete, plasters and mortars it is also suitable for preparation of repair mortars. Damaged and spalled concrete repair of large cracks.
Green Building Rating
Areas of Application
Features & Benefits
Method of ApplicationThe base must be clean and free from loose particles. Unsound areas should be removed until sound concrete is located. Any cracks, pot holes etc should be properly sealed and cured. The surface to be treated should be free from all coatings dust and unsound concrete toppings. The unsound parts should be chipped off to arrive at sound surface. Smooth substrates must be mechanically roughened e.g. by scrabbling, needle gun or grit blasting to provide an adequate key. Corroded reinforcingsteel should be exposed around its full circumference and cleaned to remove all loose scale and corrosion deposits. It is always preferably to clean the steel to a bright condition. Use of emery cloth, grit or sand blasting, or Dubond Rust Remover / Dubond ZRP is recommended
PrimingReinforcing steel must be primed with Dubond ZRP immediately after cleaning with water. The concrete substrate should be thoroughly dampened with water and any excess removed before being primed by thoroughly scrubbing in a slurry coat of 1 volume Hydrobuild SBR Latex to 1 volume water to 3 volumes fresh cement. In order to obtain a smooth consistency the cement should be blended slowly into the liquids. Stir frequently during use Hydrobuild SBR Latex Cement Mortar and screed modifier cum bonding agent to offset settlement. Avoid 'peddling' of the slurry coat. The topping must be applied on to the wet slurry. If the slurry driesout it must be removed and the clean substrate re primed.
For Heavy duty floor screeds
Precautions & Limitations
Properties
Health & Safety InstructionsHydrobuild SBR Latex should not come in contact with skin and eyes or be swallowed. Protective gloves and goggles should be worn. Hydrobuild SBR Latex should not come in contact with skin and eyes or be swallowed. If contact with skin occurs, wash well with soap and water. Eye contamination should be washed thoroughly with clean water and medical advice sought. If swallowed seek medical attention immediately. Do not induce vomiting.
Additional Information:
Packaging Details : 500 ml, 1 ltr, 5 ltr & 20 ltr container.
Underground basement
Underground basement
Emergency repair and stop huge ingress of water through structures such as swimming pool, water treatment plant, reservoir etc
Execution of underground waterproofing work which restricts the water ingress for final waterproofing treatment
For emergency repair during short duration of shutdown
For pointing of leaky joints
Advantages & Benefitsasy to use versatile concrete additives
Very useful product for pre-cast industriesVery useful emergency repair in factoryHighly useful for stoppage of water ingress through underground structuresMost useful in cold weather concreting, particularly when temperature reaches below zero degree
Very useful for early stripping of shutters
Useful for sealing joints in masonry, cracks/joints in tunnels etc
DUCO No.3 is diluted with water as recommended above. Before adding the diluted DUCO No.3, sand and cement is to be mixed thoroughly in dry condition and then the DUCO solution is added and mixed thoroughly and quickly so as to avoid stiffening during mixing. For stopping minor leakages and dampness only cement and DUCO solution are mixed thoroughly to prepare consistency and applied on the surface immediately.
Additional Information:
Packaging Details : Available in 1Kg, 5 Kg, 20 Kg, 50 Kg and 250 Kg
Mr. Bharvin Patel (Dubond Products India Pvt Limited)
C-3, 1001 & 1006, Anushruti Tower, S.G. Highway, Thaltej, Ahmedabad, Gujarat - 380054, India
Share us via
