Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Power Tile Adhesives

Listing ID #4346795

  • Bed thickness1.5mm to 10mm
  • Pot life≥ 4 hr
  • Adjustability≥ 45 min
  • Open time≥ 30 min.
  • Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer From : All over the world
View More Details
Send Enquiry
  • Member Since 6 Years
  • Nature of Business Retailer
  • Year of Establishment 2009

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

  • Pot life ≥ 4 hr
  • Open time ≥ 30 min.
  • Grouting ≈ 8 hr on wall / ≈ 24 hr on floor
  • Shelf Life & Storage 12 months with original packing in dry storage place
  • Colour white
  • Mixing ration 5.6 to 6.4 ltrs/ bag 20 kg power
  • Packing 5 Kg & 20 Kg Bag.
  • Bed thickness 1.5mm to 10mm
  • Adjustability ≥ 45 min

Dubound's Power is a single component white adhesive. That is functional for high resistance laying of ceramic tiles, glass mosaics and homogeneous tiles. The tacking polymers deformability (superior speradability) and fine finishing of the material affixed.
Areas of Application

  • Facades, heat-radiant slabs, flooring and walls, indoor/outdoor use, in civil, industrial and commercial applications and for street furniture, in areas which are humid and subject to thermal shock and freezing. Floors and walls, for internal and external use
  • Laying of ceramic and homogeneous tiles of all types, glass mosaic, stable marble and natural stone on flooring and walls, on cement-based deformable and non-absorbent substrates and heated subfloors. Suitable for homogeneous tiles, ceramics, large formats, low thickness slabs and stable natural stone Thicknesses up to 15 mm.

Features & Benefits  :

  • Guaranteeing the long life of floors and coverings subject to large temperature variations
  • Mineral adhesive for high-performance, high-deformation laying or overlaying with no vertical slip Power develops high transversal deformation along with high resistance to
  • the stress of water and freeze/thaw cycles
  • Single-component with very low volatile organic compound emissions
  • Preparation of substrates
    • In general, cement-based substrates must be free from dust, oil and grease, dry and free from any rising damp, with no loose, flaky or imperfectly anchored parts such as residual traces of cement, lime and paint, which must be totally removed.
    • The substrate must be stable and without cracks, must have already completed curing hygrometric shrinkage and must present suitable mechanical resistance levels. Undulated areas must be corrected with suitable smoothing and finishing products.
  • Non- absorbent substrates :
    • Smooth, non-absorbent substrates which are compact and wellanchored must be prepared by cleaning with products suitable for the type of dirt present.
    • If chemical cleaning cannot be carried out, proceed with mechanical abrasion by means of sand-blasting or scarification of the superficial layer and, if necessary, correct the surface with suitable levelling products.
  • High- absorption substrates : On screeds and plasters which are highly absorbent and have dusty flaky surfaces it is advisable to apply one or more coats of HydroPrime a professional, concentrated water-base, surface insulation product, in accordance with the instructions, to reduce water absorption and to improve spreadability of the adhesive.


Preparation of Adhesive Paste

  • Prepare Power in a clean container, first of all pouring in a quantity of water equal to approximately . of that which will be required.
  • Gradually add Power to the water in the container, mixing the paste from the bottom upwards with a low-rev (≈ 400/min.) helicoidal agitator.
  • Then add more water until the desired consistency is obtained. The mixture must be homogeneous and
  • without any lumps. For best results, and to mix larger quantities of adhesive, a stirring device with vertical blades and slow rotation is recommended.
  • Specific polymers with high-dispersion properties ensure that Power is immediately ready for use.
  • The amount of water to be added, indicated on the packaging, is an approximate value and will
  • vary between the Power. It is possible to obtain mixtures with a more or less thixotropic consistency, depending on the type of application.
  • Adding extra water does not improve the workability of the product, and may cause shrinkage in the plastic phase of drying and result in less effective final performance with a reduction in compressive strength and adhesion to the substrate.

Application

  • Power should be applied with a suitable toothed spreader, to be chosen according to the size and characteristics of the rear surface of the tiles. It is best to use the smooth part of the trowel to spread a fine initial layer, pressing down hard so as to obtain maximum adhesion to the substrate and to regulate water absorption, after which the thickness can be adjusted as required by tilting the spreader at an angle.
  • Spread the adhesive over a surface area which will allow for laying of the covering materials within the indicated open time, and check for suitability of the adhesive at regular intervals. The open time may vary considerably even during the application, depending on various factors such as exposure to sunlight, air currents, absorbency of the substrate, temperature and relative humidity of the atmosphere.
  • Press down each tile to allow for complete, uniform contact with the adhesive. In the case of laying in environments subject to heavy traffic, in outdoor locations, on underfloor heating systems or with materials to be smoothed on-site and with formats > 900 cm2, the double-spread technique must be used, which ensures laying procedures on fresh adhesive, 100% coverage of the rear of the tiles and maximum adhesion.
  • In general, ceramic tiles do not require preliminary treatment, however these materials should be checked to ensure they are free from traces of residual dust or materials not properly anchored to the surface

Special applications :

  • Partial replacement of mixing water with Tuffex AD professional elastomeric latex enhances the adhesive’s capacity for transversal deformation. The real necessity for deformability of the laying system must be verified, as use of an excessively deformable adhesive together with highly-rigid substrates and laying materials may cause breakage and early unexpected yielding of the covering materials when placed under heavy and concentrated strain or loads.
  • To define the percentage of Tuffex AD to be added, on the basis of the various factors related to the system, consult the Dubond Products (India) Pvt Ltd’s official web site.

Elastic joints :

Provide desolidarisation joints and elastic fractionizing joints for areas of 20/25 m2 in indoor applications, 10/15 m2 in outdoor applications and for every 8 metres length in the case of long, narrow applications. Structural and string-course joints have to be marked on the external facade.

 

Elastic joints :

  • Do not use on gypsum-base plasters and anhydrite screeds without the use of HydroPrime a professional concentrated, water-base, surface insulationproduct; on plastic or resilient materials, metals and wood; on substrates subject to continuous moisture rising
  • Do not use the adhesive to correct substrate irregularities greater than 10mm
  • Lay and press tiles onto fresh adhesive, making sure it has not formed a surface film the temperature, ventilation and absorption of the substrate and covering materials may vary the adhesive
  • workability and setting times
  • Protect against direct rain and freezing for at least 24 hours Use a toothed spreader suitable for the format of the tiles Use the double-spread technique for all outdoor laying

 

Coverage

This shall depend on the nature and flatness of the surface and the method of application, but at 1.5 mm thickness it is approximately 100 sq. ft for 20 kgs bag with a "v" notch (3mmx3mm) trowel when using a solid-bed trowel. For good coverage, itis vitally important tha tall surfaces should be clean, smooth, plumb, level and free from defects and undulations.


Details

Final characteristics
Shear adhesion after 28 days. ≥1 mpa ANSI A-118.1
Tensile adhesion on concrete after28 days. ≥ 1 mpa EN 1348 EN 1348
Durability test
Adhesion after heat agening. ≥ 1 mpa En 1348
Adhesion after water immersion. ≥ 1 mpa En 1348
Adhesion after freeze thaw cycles. ≥ 1 mpa En 1348
Working temperature from - 30°c to + 80°c -
Conformity C2 TE En 12004
Interested in this product? Ask for more details & Latest Price from seller
Send Enquiry

Company Details close-icon

Dubond Products India Pvt Limited is a reputed Manufacturer, Exporter, and Supplier of Mosaic Tiles, Concrete Admixtures, Waterproofing Chemicals etc. We are a fast-growing Indian company engaged in trading construction chemicals and wall putty. We are a preferred name in the sector and our products are in huge demand across domestic and international markets. We have been catering to the vast needs of clients all over the world. We have generated a huge clientele in a short time and we have offered them outstanding products since our company’s foundation. For us, nothing is greater than achieving client satisfaction.
Established in 2004, Dubond Products India Pvt Limited is reckoned as a reliable trader in the region. We offer a range of incredible products to clients. We are based in the city of Ahmedabad, Gujarat (India) and we operate all over the world.
  • Nature of Business Manufacturer / Exporter / Supplier / Retailer
  • Number of Employees 450 - 500
  • Year of Establishment 2009
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for Power Tile Adhesives?

Quantity
Seller Contact Details
  • Seller Dubond Products India Pvt Limited
  • Address Thaltej, Gujarat
Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice
Power Tile Adhesives at Best Price in Thaltej | Dubond Products India Pvt Limited
Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Power Tile Adhesives

Listing ID #4346795

  • Open time≥ 30 min.
  • Pot life≥ 4 hr
  • Adjustability≥ 45 min
  • Packing5 Kg & 20 Kg Bag.
  • Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer From : All over the world
View More Details
Send Enquiry
  • Member Since 6 Years
  • Nature of Business Retailer
  • Year of Establishment 2009

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

  • Bed thickness 1.5mm to 10mm
  • Open time ≥ 30 min.
  • Grouting ≈ 8 hr on wall / ≈ 24 hr on floor
  • Colour white
  • Shelf Life & Storage 12 months with original packing in dry storage place
  • Packing 5 Kg & 20 Kg Bag.
  • Adjustability ≥ 45 min
  • Mixing ration 5.6 to 6.4 ltrs/ bag 20 kg power
  • Pot life ≥ 4 hr

Dubound's Power is a single component white adhesive. That is functional for high resistance laying of ceramic tiles, glass mosaics and homogeneous tiles. The tacking polymers deformability (superior speradability) and fine finishing of the material affixed.
Areas of Application

  • Facades, heat-radiant slabs, flooring and walls, indoor/outdoor use, in civil, industrial and commercial applications and for street furniture, in areas which are humid and subject to thermal shock and freezing. Floors and walls, for internal and external use
  • Laying of ceramic and homogeneous tiles of all types, glass mosaic, stable marble and natural stone on flooring and walls, on cement-based deformable and non-absorbent substrates and heated subfloors. Suitable for homogeneous tiles, ceramics, large formats, low thickness slabs and stable natural stone Thicknesses up to 15 mm.

Features & Benefits  :

  • Guaranteeing the long life of floors and coverings subject to large temperature variations
  • Mineral adhesive for high-performance, high-deformation laying or overlaying with no vertical slip Power develops high transversal deformation along with high resistance to
  • the stress of water and freeze/thaw cycles
  • Single-component with very low volatile organic compound emissions
  • Preparation of substrates
    • In general, cement-based substrates must be free from dust, oil and grease, dry and free from any rising damp, with no loose, flaky or imperfectly anchored parts such as residual traces of cement, lime and paint, which must be totally removed.
    • The substrate must be stable and without cracks, must have already completed curing hygrometric shrinkage and must present suitable mechanical resistance levels. Undulated areas must be corrected with suitable smoothing and finishing products.
  • Non- absorbent substrates :
    • Smooth, non-absorbent substrates which are compact and wellanchored must be prepared by cleaning with products suitable for the type of dirt present.
    • If chemical cleaning cannot be carried out, proceed with mechanical abrasion by means of sand-blasting or scarification of the superficial layer and, if necessary, correct the surface with suitable levelling products.
  • High- absorption substrates : On screeds and plasters which are highly absorbent and have dusty flaky surfaces it is advisable to apply one or more coats of HydroPrime a professional, concentrated water-base, surface insulation product, in accordance with the instructions, to reduce water absorption and to improve spreadability of the adhesive.


Preparation of Adhesive Paste

  • Prepare Power in a clean container, first of all pouring in a quantity of water equal to approximately . of that which will be required.
  • Gradually add Power to the water in the container, mixing the paste from the bottom upwards with a low-rev (≈ 400/min.) helicoidal agitator.
  • Then add more water until the desired consistency is obtained. The mixture must be homogeneous and
  • without any lumps. For best results, and to mix larger quantities of adhesive, a stirring device with vertical blades and slow rotation is recommended.
  • Specific polymers with high-dispersion properties ensure that Power is immediately ready for use.
  • The amount of water to be added, indicated on the packaging, is an approximate value and will
  • vary between the Power. It is possible to obtain mixtures with a more or less thixotropic consistency, depending on the type of application.
  • Adding extra water does not improve the workability of the product, and may cause shrinkage in the plastic phase of drying and result in less effective final performance with a reduction in compressive strength and adhesion to the substrate.

Application

  • Power should be applied with a suitable toothed spreader, to be chosen according to the size and characteristics of the rear surface of the tiles. It is best to use the smooth part of the trowel to spread a fine initial layer, pressing down hard so as to obtain maximum adhesion to the substrate and to regulate water absorption, after which the thickness can be adjusted as required by tilting the spreader at an angle.
  • Spread the adhesive over a surface area which will allow for laying of the covering materials within the indicated open time, and check for suitability of the adhesive at regular intervals. The open time may vary considerably even during the application, depending on various factors such as exposure to sunlight, air currents, absorbency of the substrate, temperature and relative humidity of the atmosphere.
  • Press down each tile to allow for complete, uniform contact with the adhesive. In the case of laying in environments subject to heavy traffic, in outdoor locations, on underfloor heating systems or with materials to be smoothed on-site and with formats > 900 cm2, the double-spread technique must be used, which ensures laying procedures on fresh adhesive, 100% coverage of the rear of the tiles and maximum adhesion.
  • In general, ceramic tiles do not require preliminary treatment, however these materials should be checked to ensure they are free from traces of residual dust or materials not properly anchored to the surface

Special applications :

  • Partial replacement of mixing water with Tuffex AD professional elastomeric latex enhances the adhesive’s capacity for transversal deformation. The real necessity for deformability of the laying system must be verified, as use of an excessively deformable adhesive together with highly-rigid substrates and laying materials may cause breakage and early unexpected yielding of the covering materials when placed under heavy and concentrated strain or loads.
  • To define the percentage of Tuffex AD to be added, on the basis of the various factors related to the system, consult the Dubond Products (India) Pvt Ltd’s official web site.

Elastic joints :

Provide desolidarisation joints and elastic fractionizing joints for areas of 20/25 m2 in indoor applications, 10/15 m2 in outdoor applications and for every 8 metres length in the case of long, narrow applications. Structural and string-course joints have to be marked on the external facade.

 

Elastic joints :

  • Do not use on gypsum-base plasters and anhydrite screeds without the use of HydroPrime a professional concentrated, water-base, surface insulationproduct; on plastic or resilient materials, metals and wood; on substrates subject to continuous moisture rising
  • Do not use the adhesive to correct substrate irregularities greater than 10mm
  • Lay and press tiles onto fresh adhesive, making sure it has not formed a surface film the temperature, ventilation and absorption of the substrate and covering materials may vary the adhesive
  • workability and setting times
  • Protect against direct rain and freezing for at least 24 hours Use a toothed spreader suitable for the format of the tiles Use the double-spread technique for all outdoor laying

 

Coverage

This shall depend on the nature and flatness of the surface and the method of application, but at 1.5 mm thickness it is approximately 100 sq. ft for 20 kgs bag with a "v" notch (3mmx3mm) trowel when using a solid-bed trowel. For good coverage, itis vitally important tha tall surfaces should be clean, smooth, plumb, level and free from defects and undulations.


Details

Final characteristics
Shear adhesion after 28 days. ≥1 mpa ANSI A-118.1
Tensile adhesion on concrete after28 days. ≥ 1 mpa EN 1348 EN 1348
Durability test
Adhesion after heat agening. ≥ 1 mpa En 1348
Adhesion after water immersion. ≥ 1 mpa En 1348
Adhesion after freeze thaw cycles. ≥ 1 mpa En 1348
Working temperature from - 30°c to + 80°c -
Conformity C2 TE En 12004
Interested in this product? Ask for more details & Latest Price from seller
Send Enquiry

Company Details close-icon

Dubond Products India Pvt Limited is a reputed Manufacturer, Exporter, and Supplier of Mosaic Tiles, Concrete Admixtures, Waterproofing Chemicals etc. We are a fast-growing Indian company engaged in trading construction chemicals and wall putty. We are a preferred name in the sector and our products are in huge demand across domestic and international markets. We have been catering to the vast needs of clients all over the world. We have generated a huge clientele in a short time and we have offered them outstanding products since our company’s foundation. For us, nothing is greater than achieving client satisfaction.
Established in 2004, Dubond Products India Pvt Limited is reckoned as a reliable trader in the region. We offer a range of incredible products to clients. We are based in the city of Ahmedabad, Gujarat (India) and we operate all over the world.
  • Nature of Business Manufacturer / Exporter / Supplier / Retailer
  • Number of Employees 450 - 500
  • Year of Establishment 2009
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for Power Tile Adhesives?

Quantity
Seller Contact Details
  • Seller Dubond Products India Pvt Limited
  • Address Thaltej, Gujarat

Find similar products

View all products in Dextrin
Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice