Our Products
We offer Screws and Barrels for Extrusion and Injection blow Machines |
Making full use of extruding capacity of the extruder.
Producing smaller pipe diameter with double capacity.
Double Strand production line adopt advance German Technology . It reaches the perfect match of internal quality & appearance , realizing the high efficiency brought by One Line Two Pipes.
Range 250-800 Kgs/Hr
Loading Distance 3.6 8 meters.
Conveying Tube diameter 38-63 mm
Main Features :
Range 12-1500Kgs.
Main Features :
Application:
Use in plastic and rubber industry, chemical and pharmaceutical industry, textile industry and any other situation where temperature controlling necessary.
Use in producing plastics which high temperature mould necessary and high accuracy necessary.
We may provide the most suitable tubing sizing sleeves according to different plastic tubing.
Main features :
Mesa structure, suitable for PE and PP pipes, used for hot smelting butt joint with tees, double tees and n x 11.25o elbows.
Suitable for hot smelting butt joint of PE and PP pipes in small sizes.
Performance & Characteristic:
Range 6 mm 1200mm
Main features :
Suitable for hot smelting butt joint of PE and PP pipes.
The unit combines heat mix and cool mix together, the materials after heat mix can get into cool mix for cooling automatically, exhausts remaining gases and avoids agglomerates.
Performance & Characteristic:
These lines are developed by the rich experience & advance German technology. It is co extruded by three sets of plastic extruders. This line is composed of vacuum forming spray cooling , stable hauling, length counting , cutting & automatic coiling equipments etc.This line is fully automated from extruder to downstream equipments from feeding to final stocking. |
Available for wide range of plastic materials like LD, LLD, HDPE, RPVC, PC, ABS.
Main features :
Range 12-1500Kgs.
Main Features :
Range 16mm-63mm
UPVC tubing extrusion die structure adopts support type with reasonable designed roller track. Being specially treated, the support well-distributed flow of the materials and temperature of the melt. It is easy for disassembly and cleaning.
The Two Roll Mill with fixed speed and friction is laid out for constant working conditions. The machine is available with roll diameters of 150 mm.
The rolls are driven by a geared AC-Motor. The rear roll is driven by spur gears for a constant friction. Modifications for speed and friction are possible to meet individual requirements within certain steps.
The rolls are aligned in rigid frames. The rear roll is in a fixed position for good access to the rolls. The front roll can be moved with a hand shaft. The central adjustment ensures parallel movement. The working width is laid out for both plastics and rubber processing.
The dirve system is equipped with a knee-actuated switch for emergency stop. Opening to the necessary safety distance can be done by hand however without turning of the rear roll.
The rolls are made of corrosion resistant steel and surface hardened. A central lubrication system combined with high - temperature resistant seal rings allow low maintenance operation. The electrical heating energy is provided by cartiridge. Heat distribution is controlled in three different zones to equalize differences over the roll.
The machine is equipped with a contactor control system. Roll tempoerature will be controlled with digital controllers. With the operating units mounted in an adjustable panel the machine can be operated from both sides.
Electric and drive system are incorporated in the machine frame with easy access for maintenance. The machine will be delivered with integrated controls and needs supply connections only.
The "generally" Hot Water Bath is used for Short Term and Long Term hydro-static pressure testing. Generally, incase of Hydro-Static test For HDPE, R-PVC, C-PVC, MDPE & LATERAL PIPES, the test specimen suppose to be tested either at room temperature or at highertemperature in water bath as per IS & ASTM STANDARDS.
The Reversion Oil Bath Tester is use to determine reversion characteristics of R-PVC pipe as per immersion method of IS-12235 (Part - V) standard.
Product Range size 1300 mm 1800 mm. Output 500 700 Kgs/Hr.
The ACP production line is used for making aluminum composite panel. Aluminum composite panel(ACP) is a new building material which is composite by the PE board adhesive film and aluminum film. ACP as the new building material has so many practicability as light, sound insulation, heat insulation, fireproofing, high intensity colors the stabilization of color is good and easy to install.
Main features :
Plants available with stationery & rotating die. Apllications Plastic bags, Vest bags, Liners, Garbage bags, Packaging films, Stretch film, Shrink film, Detergent bags etc. |
Established in Bangalore (Karnataka), we have emerged as a dependable Manufacturer and Exporter of Ground Natural Calcium Carbonate. Having high levels of purity, the Ground Natural Calcium Carbonate’s raw material is naturally mined and processed from Nahita Madencilik located in the Nigde region of Turkey. We source the Ground Natural Calcium Carbonate in lumps form and also coated and uncoated from from Turkey.
Why Our Ground Natural Calcium Carbonate?
Ground Natural Calcium Carbonates, Coated with Stearic acid & uncoated , all grades .
Application
This Hopper Loader is widely applied for automatic conveying powder or powder/granules mixing in the industries such as plastic, rubber, chemical, color, food, medicine etc. The filter property is excellent even for the mixing material of CaCO3(Calcium Carbonate) and PVC in which the contant of CaCO3 is less than 50 %.
| ||||
ACP is composed of a polyethylene core between two aluminum sheets and coated with extra durable PVDF (fluororesin) resin as a composite structure which features excellent characteristics such as fireproof , waterproof, heat insulated, sound insulated and resistant against corrosion , pollution and wear. |
The Hydraulic Press is laid out as four-column press. The machine can be used to produce all kinds of flat samples in the laboratory. Working dimensions are laid out for all aboratory standards and for the use of moulds.
Press force can be set with a hydraulic pressure control unit between 10 and 100%. A pressure gauge shows the actual pressure & leakages will be compensated automatically. All functions are controlled by solenoid valves & L.C.D. Based micro controller system.
All hydraulic units are connected on a valve bank. Together with an oil pump running under oil this leads to a compact design. Heating energy is provided by plate type heater which are arranged to achieve an equal temperature distribution. An integrated water cooling system allows to cool down samples under pressure. Insulating plates are used to reduce heat transfers to the press unit.
The MICROPROCESSOR based "TOUCH-SCREEN control panel is arranges side by side with the press unit to allow easy operation. Plate temperature will be controlled with micro controllers. Electric system and hydraulic parts are integrated in the machine however easy access allows maintenance.
Product Range Dia 6mm 1600 mm
Output : 40 Kgs/Hr.- 1500 Kgs/Hr.
These production lines are developed by German Technology. It is applicable for high speed extrusion for various polyolefin materials e.g. PE, PP, PB, PERT, ABS etc.
Diameters of screw ranges from 20mm to 200mm. It is mainly applied in the extrusion of polyolefin plastics. Slotted feeder cylinder and novel screw design may remarkably enhance its plasticization. It has advantages such as high extrusive volume, low melt temperature, wide applicable material range etc.
High torque reducing speed installation
High torque output
High hardness and fineness tooth flank gear structure
Low noise box design
Oil pump cyclic lubrication
Outer-connected cooler forced cooling
Special feeder inlet design
Has perfect water cooling device
Professional bushing with ladder groove
Charger with infeed device
Control system
Fairly high precision temperature-control device
Speed regulative system with stable operation
Control components with reliable performance
Plasticization controllable which optimizes its plasticization performance
Low melt temperature makes the melt body even.
Machine barrel and screw made with introduction of German technology
Non-maintenance operation, super-quiet blower cooling cylinder
Resistance porcelain heater coil, Germany origin design for out looking
Control system is also available with Microcomputer.
Product Range Dia 16mm 160 mm
These lines are developed by the rich experience & advance German technology.
This line is fully automated from extruder to downstream equipments from feeding to final stocking.
SJSZ series of conical twin-screw extruder is a super-twin -conical extruder, which is developed and manufactured by German Technology . Machines of this series all are provided with features of uniform plastication, pugging and agglomeration, reliable quality, high production, wide application range, long service life and so on. Equipped with the companys various mould tools and down-stream auxiliary equipment, you can directly produce PVC pipes. Main features:
|
Application
The product is mainly used in mixing, coloring and drying of various resin such as polyethylene, polyproplyene, polyvinyl chloride etc. and in the process of drying and volatilization of engineering plastics such as ABS, polycarbonate etc. before forming and processing as well as in the mixture of phenolic resin.
The unit combines heat mix and cool mix together, the materials after heat mix can get into cool mix for cooling automatically, exhausts remaining gases and avoids agglomerates.
Main features:
Range from 20mm to 630mm.
|
Main Features :
Application:
This product is applied to many trades such as plastic , rubber, electroplate, food and chemical industry etc. and provides cooling water for industry production. It can also be applied to air condition system in hotel, restaurant, shopping center, school, hospital and factory and all kinds of new and restructure industrial civil building.
The Zero Degree Chamber is specially used to condition the R-PVC pipes at 0 Deg. C. For impact testing as per IS 4985 standard.
A true material comparison is possible only when property values are determined by identical test methods under identical conditons. Generally speaking, physical and mechanical properties of plastics and electrical insulating material are affected by temperature and humidity. Plastic materials tested above room temperature will yield relatively higher impact strength and lower tensile strength and modulus. Obviously, in order to make reliable comparisons of different materials and test results obtained by different laboratories, it is necessary to establish standard conditions of temperature and humidity for testing.
The Hot air circulating oven is used for multipurpose tests for plastic matiral such as Shrinkage, Reversion, Warpage, Moisture Content and Leteral E. S. C. R. test at different temperatureFree Falling Dart Impact Tester |
The HDT/VSP instrument is used for determining the deflection temperature limit for specific application and comparing the heat softening characteristics of thermoplastic material at a constant load in oil upto 300 Deg. Co.c |
The Hot Embossing Pipe Printing Machine is designed incorporating many features and new ideas. The machine is very easy to operate and even non-technical person can also operate the machine to get the results as per the requirement.