Our Products
Specifications
DESCRIPTION | RAJ-50PP | RAJ-65PP | RAJ-75PP | RAJ-90PP |
---|---|---|---|---|
Screw Diameter | 50 mm | 65 mm | 75 mm | 90 mm |
LD Ratio | 24:01:00 | 24:01:00 | 24:01:00 | 24:01:00 |
Die Size ( mm ) | 15 to 32 | 19 to 45 | 32 to 75 | 45 to 100 |
Production Size(mm) | 15 to 32 | 19 to 45 | 32 to 75 | 45 to 100 |
Thickness | 0.2 to 2 mm | 0.3 to 3 mm | 0.5 to 5 mm | 1 to 5 mm |
Production-Kg/Hour | 30 | 50 | 80 | 110 |
Electrical Heating Load on Barrel | 6 Kw | 8 Kw | 11Kw | 15 Kw |
Electrical Heating Load on Die | 3 Kw | 3.5 Kw | 5 Kw | 6 Kw |
Electrical Heating Load of Cooling Blowers on Barrel | 0.3 Kw | 0.3 Kw | 0.3 Kw | 0.3 Kw |
Electrical Load of Vacuum Pump | 1.5 Kw | 2.2 Kw | 3.7 Kw | 3.7 Kw |
Electrical Load of Catter Puler Motor | 1.5 Kw | 1.5 Kw | 2.2 Kw | 3.7 Kw |
Main Motor Capacity | 7.5 Kw | 11 Kw | 15 Kw | 18 Kw |
Total Electrical Load Required for Plant | 22.0 Kw | 26.5 Kw | 37.2 Kw | 46.7 Kw |
Space Required for Plant LxWxH Mtrs | 6.5x3x2.5 | 6.5x3x2.5 | 8x3x2.5 | 10x3x2.5 |
Specifications
Model | Screw dia.(Mm) | Connected Load (KW) | Output (kg/h) |
---|---|---|---|
RAJ-65/75 TSRP | 65/75 | 45KW | 40-60 |
RAJ-75/90 TSRP | 75/90 | 55KW | 60-80 |
RAJ-90/100 TSRP | 90/100 | 66KW | 90-120 |
RAJ-100/110 TSRP | 100/110 | 80KW | 130-160 |
RAJ-110/120 TSRP | 110/120 | 92KW | 160-220 |
RAJ-120/140 TSRP | 120/140 | 108KW | 180-250 |
Washer Unit
Its is a unit used for washing of plastic waste after it is granulated in the grinder crusher . It has the continues flow of water to clean the dirty water drains out through the discharge at the bottom. Material from the water unit is discharged into the settling tank here the material is pushed from one end of the tank to the other end. As it proceeds to the other end all the dirt if any settles down and clean plastic reaches the other end.
It consists of
Dryer Unit
Its is a unit used for drying of wet plastic . Wet plastic is fed through the hopper of the Dewatering unit which removes water from the plastic and discharges it to the hopper above the blower. Blower and heating unit carry the plastic to the Storage tank and also remove any moisture that may be present in the process.
It consists of
Specifications
Model | Screw dia.(mm) | Connected Load (KW) | Output (kg/h) |
---|---|---|---|
RAJ-65RPDFC | 65 | 24 | 40-60 |
RAJ-75RPDFC | 75 | 34 | 60-80 |
RAJ-90RPDFC | 90 | 48 | 90-120 |
RAJ-100RPDFC | 100 | 65 | 130-160 |
RAJ-120RPDFC | 120 | 105 | 180-250 |
RAJ-150RPDFC | 150 | 140 | 300-360 |
Specifications
Description | RAJ-50FM | RAJ-65FM | RAJ-75FM | RAJ-90FM |
---|---|---|---|---|
Screw Diameter | 50mm | 65mm | 75mm | 90mm |
LD Ratio | 24:01:00 | 24:01:00 | 24:01:00 | 24:01:00 |
Die Size | 50to70mm | 100to150mm | 175to200mm | 150to250mm |
Film Width in mm | 50to650 | 300to1250 | 400to1450 | 400to1650 |
Film thickness in microns | 10to40 | 10to50 | 10to60 | 10to70 |
Production | 50Kgs/Hr | 70Kgs/Hr | 80Kgs/Hr | 100Kgs/Hr |
Electrical Heating Load on Barrel | 7Kw | 10Kw | 14Kw | 18Kw |
Electrical Heating Load on Die | 3Kw | 5Kw | 7Kw | 10Kw |
Electrical Heating Load of Cooling Blowers on Barrel | 0.3Kw | 0.3Kw | 0.3Kw | 0.3Kw |
Electrical Load of Take off Unit | 0.75Kw | 0.75Kw | 1.5Kw | 1.5Kw |
Electrical Load of Air ring Blower | 1.5Kw | 1.5Kw | 2.25Kw | 2.2Kw |
Main Motor Capacity | 7.5Kw | 15Kw | 18Kw | 22Kw |
Winder Motor Capacity | 1.5Kw | 1.5Kw | 2.2Kw | 2.2Kw |
Total Electrical Load Required for Plant | 21.55Kw | 34.05Kw | 45.2Kw | 56.2Kw |
Space Required for Plant LxWxH | 6x4x4.5mtrs | 7x4x4.5mtrs | 8x4x4.5mtrs | 9x4x4.5mtrs |
Specifications
MODEL | UNIT | RAJ-55PP3 | |
---|---|---|---|
Colour | nos | 3 | |
Pipe Dia | mm | As per sample | |
Pipe Length | mm | As per sample | |
EXTRUDER | |||
Screw Dia | mm | 55/25/25 | |
L/D | ratio | 26:01:00 | |
Output | kgs/hr | 30 | |
Main motor | kw | 7.5/1.5/1.5 with Invertors. | |
Heating Load | kw | 10 | |
DIES | |||
Material | type | alloy steel chromeplated. | |
Die Set | nos | 2 | |
COOLING UNIT | |||
Vacuum pump(partial) | kw | 2.25 | |
Tank Length | m | 5 | |
HAUL OFF UNIT | |||
Belt width | mm | 50 | |
Motor | kw | 1.5 with Invertor | |
CUTTING UNIT | |||
Cutter | type | double | |
Motor | Kw | 0.75 with Invertor | |
OTHERS | |||
Total load | kw | 30 | |
Dimensions | lxbxh(m) | 7.5x2x1.5 | |
Machine Wieght | ton | 3 |
Specifications
Model | Connected Load (KW) | Output (kg/h) |
---|---|---|
RAJ-10G | 3.75 | 30 - 50 |
RAJ-12G | 5.6 | 50 - 75 |
RAJ-15G | 7.5 | 75 - 100 |
RAJ-18G | 80 | 100 -125 |
RAJ-20G | 11.25 | 125 - 150 |
RAJ-24G | 18.75 | 200 - 150 |
RAJ-30G | 30 | 300 - 450 |
RAJ-40G | 45 | 500 - 600 |
Specifications
Model | Connected Load (KW) | Output (kg/h) |
---|---|---|
RAJ-10AG | 7.5 | 30 - 45 |
RAJ-20AG | 15 | 45- 88 |
RAJ-30AG | 22.5 | 90 - 130 |
RAJ-50AG | 37.5 | 140 - 210 |
RAJ-75AG | 56 | 200 - 300 |
RAJ-100AG | 75 | 280 - 430 |
RAJ-120AG | 90 | 400 - 550 |
RAJ-180G | 135 | 600- 850 |