My ExportersIndia

For Buyer

For Seller

For Help

Our Products

We offer a complete product range of Smart Backup Solutions, Lift Backup System, Phase Backup System - Industrial UPS and 1 Phase Backup System

Lift Backup System

EAPRO Pure Sine wave LB-UPS series UPS is designed to generate 3-phase 4 wire output by incorporating worlds most advanced DSP based 20 KHz Pulse Width Modulation technology to drive IGBTMOSFET for increased crest factor. This type of UPS is widely used in lift, elevators, escalators, security systems, Water Pumps, Fire pumps etc. Whenever the utility supply is available, the charger provides constant voltage and constant current to charge the battery bank.It consists of Sine wave three-phase UPS Inverter, battery charger, and an electronic change over module. EAPRO Pure Sine wave LB-UPS series UPS take cares your commercial and industrial equipments for their extended service life, as it is designed to suppress the harmonic distortion. Closed Loop Auto Sensing Software Control (ASSC) Smart Charging circuit charges the battery for the enhanced battery life. It has the exclusive capability to provide longer power backup due to faster charging. EAPRO sine wave LB-UPS are of world class in terms of Performance, Durability, Reliability & Efficiency.Most preferable Power Back up source in big Houses, Industries, corporate offices and BPOs for three phase application.Provide reliable power back for UFTS Elevators installed in Multiplexes & Shopping malls.All Motor based applications like AC, Fire Pumps, Water Pumps, Compressors, Water Coolers & Deep Refrigerators & other 3 Phase critical motorized equipments.Petrol Pumps, Fuel Dispensers.Emergency and Transportable Power Systems.Gym Equipments Health Equipments like Joggers etc.Computer and office equipments as like Scanners, Printers, Fax Machines etc.
View Complete Details

Phase Backup System - Industrial UPS

  • Input Voltage Range (Normal Mode) 100 to 280 VAC ± 5 VAC (Wide Range)
  • Input Voltage Range (UPS Mode) 180 to 260 VAC ± 5VAC
  • Changeover Time Maximum < 30 ms (in Normal Mode) and < 10 ms (in UPS Mode)
  • Max. Charging Current (NC) 10A + 1A
  • Max. Charging Current (HC) 14A + 1A
  • Boost Charging Voltage 14.4 ± 0.2 VDC per Batt.
  • Float Charging Voltage 13.7 ± 0.2 VDC per Batt.
  • Output Voltage at No Load 220 VAC ± 7 VAC
  • Output Frequency 50.0Hz ± 0.5Hz
  • Output Wave Form (At No Load) 100% Pure Sine Wave
  • Battery Low alarm 10.6 ± 0.2 VDC per Batt.
  • Overload (Normal/ UPS) 120%
  • Short Circuit (Normal/ UPS) 300%
  • Battery Low protection 10.4 ± 0.2 VDC per Batt.

EAPRO Pure Sine wave Industrial UPS series incorporates worlds most advanced DSP based 20 KHz Pulse Width Modulation technology to drive IGBT/MOSFET for increased crest factor for Industrial use. EAPRO Industrial UPS provides stable output to operate the sensitive machinery and office equipment like computers, printers, photocopiers etc and even the Air-Conditioners.

It provides true sine wave power which is purer than the grid power which is free from any surges, transients and other EMI effects. EAPRO Pure Sine wave Industrial UPS series cares your expensive, sensitive home, office and industrial equipments for their extended service life as it is designed to suppress the harmonic distortion. Closed Loop Auto Sensing Software Control (ASSC) Smart Charging circuit charges the battery for the enhanced battery life. It has the exclusive capability to provide longer power backup due to faster charging. EAPRO Industrial UPS are of world class in terms of Performance, Durability, Reliability & Efficiency.

Application
  • Most leading Power Back up source for big House, Industries, corporate offices and BPOs.
  • Provides reliable back-up to Office Equipments like Computers, Projectors, Printers, Scanners and Fax Machines etc.
  • Suitable for Banks, Multiplexes and Shopping malls.
  • Suitable for all motor based applications like AC, Fire Pumps, Water Pumps, Compressors, Water Coolers, Deep Refrigerators and other 3 Phase critical motorized equipments.
  • Suitable Petrol Pumps, Fuel Dispensers.
  • Emergency and Transportable Power Systems.
  • Gym Equipments /Health Equipments like Joggers etc.

Product Range
  • 1 phase to 1 phase

Key Features

  • Latest DSP based technology using 20 KHz PWM technology for absolute and stable sine wave output.
  • Regulated output voltage and frequency for smooth and quite operations of AC motors and Inductive loads unlike the irritating noise that comes from Modified Sine Wave Systems.
  • Instant changeover by electronic switch for High reliability ensuring compatibility with Computers.
  • Special TDR (Time Delay Relay), for compressor based applications like AC. (Optional)
  • Capability of Surge Load upto 300%.
  • Extremely low Total Harmonic Distortion (

VA Rating

2.5 KVA

3.5 KVA

5 KVA

6 KVA

7.5 KVA

10 KVA

Battery Voltage

36V DC/ 48V DC

48V DC

48V DC/ 96V DC

120V DC

120V DC

120V DC/ 180V DC

 

VA Rating

5 KVA

7.5 KVA

10 KVA

12 KVA

15 KVA

20 – 100 KVA

Battery Voltage

96V DC/120V DC

120V DC

120V DC/180V DC

192V DC

240V DC/360V DC

360V DC

Application Load Type 2.5KVA 3.5KVA 5KVA 7.5KVA 10KVA 12KVA
Petroleum Outlet Fan - 1 4 5 5 5
  Tube Light - 5 4 5 8 8
  Petrol Filling Machine - 1 2 3 4 5
Institute Fan Only 25 30 50 75 100 110
  Fan 15 18 35 55 70 75
  Tube Light 13 17 20 35 40 50
Browsing Centre A.C. - - 1 1 2 2
  Fan 4 5 4 8 8 10
  Tube Light 4 6 4 8 8 10
  Computer 5 6 2 6 6 6
Browsing Centre Fan 4 5 10 12 20 25
  Tube Light 4 6 10 12 20 25
  Computer 5 6 8 12 15 20
Corporate Bulding A.C. - - 1 1 1 2
  Fan 15 18 8 12 16 20
  Tube Light 13 17 8 12 16 20
View Complete Details

Smart Backup Solutions

  • Input Voltage Range (Normal Mode) 100 to 280 VAC ± 5 VAC (Wide Range)
  • Input Voltage Range (UPS Mode) 180 to 260 VAC ± 5VAC
  • Changeover Time Maximum < 30 ms (in Normal Mode) and < 10 ms (in UPS Mode)
  • Max. Charging Current (NC) 10A + 1A
  • Max. Charging Current (HC) 14A + 1A
  • Boost Charging Voltage 14.4 ± 0.2 VDC per Batt.
  • Float Charging Voltage 13.7 ± 0.2 VDC per Batt.
  • Output Voltage at No Load 220 VAC ± 7 VAC
  • Output Frequency 50.0Hz ± 0.5Hz
  • Output Wave Form (At No Load) 100% Pure Sine Wave
  • Battery Low alarm 10.6 ± 0.2 VDC per Batt.
  • Overload (Normal/ UPS) 120%
  • Short Circuit (Normal/ UPS) 300%
  • Battery Low protection 10.4 ± 0.2 VDC per Batt.
EAPRO Pure Sine Wave SMART Industrial UPS series incorporates worlds most advanced Technology of wireless communication with the Inverters. This SMART Industrial UPS provides advance comfortability to the check/see the real time values or status of the Inverter system. There are mainly three types of SMART Solutions :

2.4GHz Wireless Remote Solution
Mobile Solution (GSM/GPRS)
Wired (LAN)/Wireless (WiFi) SNMP Solution
EAPRO Pure Sine Wave SMART Industrial UPS series incorporates worlds most advanced DSP based 20 KHz Pulse Width Modulation technology to drive IGBT/MOSFET for increased crest factor for Industrial use. It provides stable output to operate the sensitive machinery and office equipment like computers, printers, photocopiers etc and even the Air-Conditioners.It provides true sine wave power which is purer then the grid power which is free from any surges, transients and other EMI effects. During power backup it cares your expensive, sensitive home, office and industrial equipments for their extended service life as it is designed to suppress the harmonic distortion.Closed Loop Auto Sensing Software Control (ASSC) Smart Charging circuit charges the battery for the enhanced battery life. It has the exclusive capability to provide longer power backup due to faster charging. EAPRO SMART Industrial UPS are of world class in terms of Performance, Durability, Reliability & Efficiency.

Application
  • Most leading Power Back up source for big House, Industries, corporate offices and BPOs.
  • Provides reliable back-up to Office Equipments like Computers, Projectors, Printers, Scanners and Fax Machines etc.
  • Suitable for Banks, Multiplexes and Shopping malls.
  • Suitable for all motor based applications like AC, Fire Pumps, Water Pumps, Compressors, Water Coolers, Deep Refrigerators and other 3 Phase critical motorized equipments.
  • Suitable Petrol Pumps, Fuel Dispensers.
  • Emergency and Transportable Power Systems.
  • Gym Equipments /Health Equipments like Joggers etc.

Key Features of SMART UPS

  • Enables control from almost anywhere (more comfortable).
  • Instant alerts & emergency control.
  • It is a cost effective solution so it Encourage standardization.
  • Optimal for people with reduced mobility.
  • It can be combined with local control to give higher flexibility.
  • SMART UPS can be accessible via Smartphone.
  • Controlling and monitoring through Internet.
  • Can upgrade the firmware of the UPS through Internet.
  • We make it scalable for further add-ons.
  • Remote Control is necessary as in case you are not at home and UPS is installed at Home.
  • Developing low-price systems will accelerate the process of turning our UPS intelligent.
  • The price of the intelligent UPS in a house in comparison with its facility is much more significant.
  • It is suitable for inexperienced users or even for disabled people.

Features of Wireless Remote

  • LCD Display for displaying UPS parameters, conditions and Wireless Network status.
  • Switch with LED indication for UPS Functionality.
  • Dual Side (UPS and Remote) control by wireless communication.
  • Enter Sleep mode after 2 min for Power Saving when there is no operation.
  • Wake up from power saving on following condition:
  • Fault in the UPS (Short Circuit, Over Load, Battery Low etc.)
  • Mains Cut or Mains On
  • Switch operation from UPS Side
  • Switch operation from Remote Side

Features of Mobile Solution (GSM)

  • Whenever user will give a call to saved no. in UPS, The call will automatically get disconnected and UPS will send all the UPS data to called number via SMS.
  • You can save contact numbers and Email ids via a frontend software.
  • Whenever any UPS fault occurs, UPS will send alarm Message to the saved numbers.
  • UPS can also send mail through GPRS.
  • UPS files can also save in memory card and user can access them through GPRS whenever they want.

Features of Wireless/WiFi SNMP

  • Live Monitoring and Control through computer.
  • Graphics View for easy monitoring.
  • Information of faults to the user via SMS and Email.
  • One month storage of UPS data in Database.
  • Hibernate the PC at fault conditions like battery low of UPS for user data saving.
  • UPS trap message will show automatically at any UPS fault.

Additional Features

  • Latest DSP based technology using 20 KHz PWM technology for absolute and stable sine wave output.
  • Regulated output voltage and frequency for smooth and quite operations of AC motors and Inductive loads unlike the irritating noise that comes from Modified Sine Wave Systems.
  • Instant changeover by electronic switch for High reliability ensuring compatibility with Computers.
  • Special TDR (Time Delay Relay), for compressor based applications like AC. (Optional)
  • Capability of Surge Load upto 300%.
  • Extremely low Total Harmonic Distortion (
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us