Other Products / Services #1059209

• Table Top Grommet Mounting with Single Arm.
• Easy to Fit.
• Height Adjustment of 100mm.
• Compatible for VESA 75 x 75 & 100 x 100 with an extra plate.
• Die cast for good Aesthetics.
• Can be Rotated towards left & right as well as Tilted up & down with a single knob.

• Easy and rapid installation.
• Half turn locking.
• Cutter size: 15mm.
• Flat pack C.K.D. fitting with pre-drilling.
• Cap available for concealed fitting.
• Housing available for 12, 16, 18 & 25 mm boards.
• New Dowel Pin is push fit in a 8mm hole.
• New Minifix screw diecast is available.
• Also Available with double ended bolt and M6 threaded screw with M6 Dowel.
• Rotor Screw is manufactured out of cold forged steel for strength, eliminating chances of breakage.
• The multi - functional plastic enables the screw to be held while fixing with a pneumatic screw driver as well as a perfectfit in the pre - drilled hole.
• Mitre Joint Connectors are ideal for joinery cabinets having Mitre using Minifix.
• Mitre angles from 45 to 90 is possible.
• Split Dowel-Mini fix pin is made out of forged steel for strength. Special grade of plastic for reusability.
• Pin needs to be pushed for inserting and unscrewed for removing.

• Used to join furniture cabinets and cupboards of particle board.
• Furniture can be knocked down and reassembled in no time.
• Finish : Zinc Plated

• M4 Screws and Sleeves are Nickel plated for good aesthetics.
• Used to join boards of various thickness.
• Also acts as a dowel.

• Ideal for cupboards and wardrobes where space is a constraint.
• Weight of shutter should not exceed 35 kgs.

• These oval wardrobe rail supports are die cast for strength and long life.
• Easy to fit and compatible with a special oval rail.
• Wardrobe rails are available in S.S 304 polished and Aluminium Anodized.
• Coat hooks are also available.
• System 32 compatible.
• Rail centre supports are elegantly designed, manufactured out of Zinc alloy for strength and increasing the load bearing capacity of wardrobe rails.

• Ideal for wardrobes with folding/sliding doors, 180 opening shutters, walk in wardrobes, etc.
• Uses minimum space of the cabinetand eliminates the need of a seperate dressing table.
• Can be pulled outand rotated by 90.
• Minimum width required for rotation is 230mm.
• Full height of the mirror ensures better view.

• Manufactured out of polypropylene.
• To be used as a spacer with 'ebco' Kitchen Baskets.
• Available in three different sizes

• For storing grain, oil and larger tins or cans up to 50kgs.
• Manufactured out of stainless steel 304 grade and electro polished.
• Designed to be used with 'ebco' heavy duty telescopic drawer slides with direct nut bolt assembly.

• For converting plain baskets to a partition basket with adjustability as per customers choice.
• Manufactured out of stainless steel 304 grade and electro polished.
• Designed to be used with 'ebco' plain baskets.

• Simple and elegant in appearance, ideal for over head kitchen cabinet.
• Cantilever type Swing out tray for easy accessibility from three Sides.
• Basket made out of Stainless Steel 304.
• System 32 Compatible.
• Special phenolic base is water proof and easy to remove and clean when required.

• Drip tray is made out of ABS plastic
• Elegantly designed for good aesthetics and made out of SS304 for long life.
• Special spring loaded anchors help secure the shelf.
• Give proper support and take care of dimensions and inaccuracy between side walls, tiles etc.
• Ideal kitchen accessories to store plates and glasses.

• Elegantly designed for good aesthetics and made out of SS 304 for long life.
• Easy to fit.
• Ideal kitchen accessories to store Plates & Glasses.

• Manufactured out of SS 304.
• Ideal for hanging ladles and other kitchen cutlery.
• Easy to fit on the wall and convenient.

• Manufactured out of SS 304.
• Ideal for hanging wine glasses.
• Easy to fit on to the ceiling of cabinets.
• Elegant & cost effective design.

• Manufactured out of SS 304.
• Ideal for Hanging 6 cups.
• Easy to fit on to the Ceiling of Cabinets.
• Elegant & Cost effective design.

• Designed with aestheticlook.
• Designed for strong and comfortable grips for windows.
• Left and Right hand movements.
• Wedges are inbuilt in handles, No need ofscrewing wedges onto frame.
• Easy to fit.

• Ideal for 19mm (3/4") section.
• Available as a pair for left and right hand sliding windows.
• Designed to engage automatically with a spring loaded slide catch.
• It also has a unique safety lock switch.
• Also Available with Cranked Hook for 25mm (1") section.

• Aunique lock for sliding windows.
• Easy locking and unlocking by simple half rotating, clock-wise or anti clock-wise.
• Eliminates the need for handles.
• Available for both right and left hand locking.

• 90 Glass to Glass Connector
• 135 Glass to Glass Connector
• 180 Wall to Glass Connector
• 3 Way Glass to Glass Connector
• 90 Wall to Glass or Floor to Glass Connector
• 135 Wall to Glass Connector
• 90 Wall to Glass Connector
• 180 Glass to Glass Connector

Steel and zinc plated, for right angle joints of cabinet walls. Finish: Zinc White, used to enclose text in various technical

• Made of AISI 304 stainless steel and brass.
• Pressure adjustable brake for stopping.
• Can be used for side hung horizontal axis opening ventilators, as well as top hung vertical axis opening windows.
• Can be used in wood, aluminium or plastic windows.
• Self cleaning design.
• Also now available in independent left and right hand working for better closing and alignment.