Laminar Air Flow Unit

Listing ID #4604816

Get Latest Price

Direction of flowHorizontal
Velocity90 FPM +/- 20%
Noise level65 decibel +/- 5%
Particle retentionAbove 0.3 micron
Supply Type Manufacturer, Exporter, Supplier

Preferred Buyer From : India only

View More Details

Send Enquiry

Product Details

Cleanliness CLASS 100
Direction of flow Horizontal
Hepa Filter Size and quantity will depend on the size selected
Particle retention Above 0.3 micron
Noise level 65 decibel +/- 5%
Velocity 90 FPM +/- 20%
Vibration level < 2.5 micron
Rate of air flow 0.40 to 0.75 M/Sec (90 FPM)
Blower Assembly 1/3 HP,1440 RPM

EIE-2502 : Vertical
EIE-2502 : Horizontal

EIE-2502 Vertical : Deluxe Model

Body made of cold rolled sheet duly powder coated. Table made of S. S. 304, front door of clear acrylic, UV lamps will be Phillips/equal imported make. Other standard accessories such as Manometer, gas inlet, castor wheels, illumination, additional power point are included in the price.

Working Size (Feet)

2 x 2 x 2

3 x 2 x 2

4 x 2 x 2

6 x 2 x 2

Note

The Laminar Flow Cabinet can be made of S. S. Instead of mild steel at an extra cost . Price on request.

Pressure Differential Manometer will indicate the pressure behind the HEPA FILTER and after few years, the pressure will be more because of accumulation of dusts at the upstream side. Once the pressure level indicates above 22 mm WG in the manometer or the velocity at the downstream side falls below 60 feet per minute, the filters may be replaced. The velocity can be monitored by using external anemometer.

HEPA Filers

Particleretention will be 0.3 micron at rated velocity, Pressure drop will be 23 mm WG, Efficiency 99.97%. Protected with specially perforated SS grill at the downstream side.

Pre-Filters

size will depend on the size selected. Particle retention down to 15 micron at rated velocity, Pressure drop 6 mm WG, Efficiency 90 % Protected with specially perforated SS grill.

Blower Assembly

consists of a 1/4 HP,1440 RPM, single phase Motor with double end shaft and a pair of aluminum centrifugal type impeller directly coupled on both ends of the motor & encased within an MS blower housing.

Material of Construction

The complete LAMINAR AIR FLOW BENCH will be fabricated by using Powder coated CRC sheet with square pipes. Front door made of 6 mm clear acrylic(polycarbonate at extra cost) with double folding facility. Working table will be of complete stainless steel. Ultra violet lamp of 3 feet 30 watts-Philips- Holland make will be provided.

Standard Accessories

The equipment will be provided with 40 watt daylight lamps with diffusers, Gas cock, castor wheels, pressure differential manometer, additional 5 amps power point, side screens made of 6 mm clear acrylic.

Working Size (Feet)

2 x 2 x 2

3 x 2 x 2

4 x 2 x 2

6 x 2 x 2

Note

The Laminar Flow Cabinet can be made of S. S. Instead of mild steel at an extra cost . Price on request.

HEPA Filers

Particleretention will be 0.3 micron at rated velocity, Pressure drop will be 23 mm WG, Efficiency 99.97%. Protected with specially perforated SS grill at the downstream side.

Pre-Filters

size will depend on the size selected. Particle retention down to 15 micron at rated velocity, Pressure drop 6 mm WG, Efficiency 90 % Protected with specially perforated SS grill.

Blower Assembly

Material of Construction

Standard Accessories

Working Size (Feet)

2 x 2 x 2

3 x 2 x 2

4 x 2 x 2

6 x 2 x 2

Note

The Laminar Flow Cabinet can be made of S. S. Instead of mild steel at an extra cost . Price on request.

Interested in this product? Ask for more details & Latest Price from seller

Send Enquiry

Company Details

Its late founder Mr. Vimal C. Parikh sowed the seed of presently known EIE Instruments way back in 1977. The seed has now grown to a large tree, which gives shelter and meaning of life to Hundreds of people associated with it. The present directors, staff members and all concerned will remain permanently indebted to him for this courage, support and guiding principles.
We started modestly as a marketing organization and later entered the ever-challenging field of manufacturing. The rich, hard-earned experience as a marketing organization and close interaction with the end users, paved the way for a customer driven, customer focused and customer oriented company.
EIE Instruments is a part of Tech-Mech group. The Group has interest in manufacturing, marketing and Calibration of Scientific Instruments and Testing Equipments for various applications. Professional marketing set up, strong commitment to after sales support, over 30 years experience in understanding and meeting our customer's requirements and sustained emphasis on customer satisfaction, has build a loyal base of customers in different segments of industry, Research and Education field through out the country.
Please take account of our following facilities :
Factory, built on large industrial plot of about 3000 sq. Yards, well equipped with latest Plant and machineries,
Quality assurance department and in house Calibration Lab equipped with state of the art tools, gadgets and Instruments to ensure accurate and reliable product,
Dedicated team of trained and experienced service Engineers
Professional Marketing staff
At EIE, we always think and view any point, from the customers` point of view. Be it, Quality of goods, delivery schedules or after sales service support, we always think of customers delight and satisfaction. To ensure this, we have implemented ISO standards at all levels of organization and are strictly governed by it. We are accredited with ISO 9001 certification for our manufacturing, marketing and Calibration activities. However, this is just beginning. We have lot more to offer.
We invite you to witness our manufacturing, Quality assurance and Calibration facilities to know us better and work with greater confidence.