Listing ID #3806216
Ask for more detail from the seller
Contact SupplierDouble walled, inside chamber stainless steel, outer body made of CRC/G.I. - powder coated, Temp. Range from ambient +5° C to 60° C controlled by Dual Display Microprocessor based Digital Temp. Controller with +/- 0.5° accuracy, Humidity range from atmospheric humidity to 95 % controlled by Dual display Microprocessor based Digital Temp. Controller (Dry and Wet bulb method) with + 3 % RH. Inner water tank made of stainless steel with ball cock valve. Front door has a full view glass observation window.
Optional Fittings for EIE - 105With Refrigeration System. Double walled, inside chamber stainless steel, outer body made of CRC/G.I. - powder coated, Temp. Range from 10° C to 60° C controlled by Dual display microprocessor based Digital temp. indicator cum controller with ± 0.5° C accuracy or better. Cooling system consist of high efficiency Kirloskar Make compressor with relevant accessories. Humidity range from atmospheric humidity to 95 % controlled by Dual display Microprocessor based Digital Temp. Controller (Dry and Wet bulb method) with accuracy + 3 % RH or better. Inner water tank made of stainless steel with ball cock valve. Front door has a full view glass observation window
Optional Fittings at Extra CostThe above Humidity Oven can be converted into PLANT GROWTH CHAMBER by using 4 fluorescent tube light provided with 24 hours ON/OFF programmable timer for Day /Night effect. Temp. range 15° to 60° C. At extra cost.
Optional Accessories(at extra cost)Double wall construction interior fabricated of stainless steel(S.S.304). Exterior of corrosion resistant galvanized sheet, finished in powder coated epoxy paint. Full size glass inner door to inspect samples without affecting the chamber temp. outer double walled metal door with magnetic gasket and lock. Unit mounted on castor wheels for easy movement.
70mm polyurethane insulation (PUF) to ensure better insulation and less leakage of temperature or 10% RH from inner body to the surroundings.
Temperature is maintained by a quiet running blower circulation air through out the chamber. Forced air circulated vertically down and re circulated through out the chamber for uniform temperature and humidity.
HumidityHumidity created by steam injection method. The boiler tank is fitted in the back side of the chamber for better servicing, Electro magnetic switch for controlling the wet heater from burning off if water level is not adequate. Float valve provided to control water level in the boiler tank.
Heating & Cooling SystemLong lasting SS tubular heaters used as heating element. The stainless steel tins provided to ensure better heat transfer. Hermetically sealed compressor CFC free compressor (134 A gas) coupled with evaporation coil and condensor.
TraysRemovable perforated trays provided made of S.S.
ControlMicroprocessor based temp and direct RH digital PID controller. Humidity directly measured in % RH by electronic sensor.
Temp. Range10 to 70°C, Accuracy +/- 0.5°C
Humidity Range40% RH to 90% RH Accuracy +/- 3% RH
ICH GuidelinesAs per ICH Guide lines, stability studies to be carried out under the following conditions.
Long TermAt 25°C (+/- 2°C) & 60% RH (+/- 5% RH)
Validation ; Validation of the chamber (Heat Mapping) will be done at 8 zones in the chamber using 8 channel scanner (4 works and printout of the result will be provided. For on site validation charges extra.
Optional Fittings at Extra Cost:hamber Size(cm) | Cu. | Trays | ||
H | W | D | ||
45 | 45 | 45 | 3 | 2 |
70 | 50 | 50 | 6 | 3 |
90 | 60 | 60 | 12 | 3 |
Chamber Size(cm) | Cu. | Trays | ||
H | W | D | ||
45 | 45 | 45 | 3 | 2 |
71 | 45 | 45 | 6 | 3 |
90 | 60 | 60 | 12 | 3 |
Chamber Size(cm) | Cu. | Trays | ||
H | W | D | ||
45 | 45 | 45 | 3 | 2 |
70 | 50 | 50 | 6 | 3 |
90 | 60 | 60 | 12 | 3 |
125 | 60 | 60 | 16 | 4 |
Chamber Size(cm) | Cu. | Trays | ||
H | W | D | ||
45 | 45 | 45 | 3 | 2 |
70 | 50 | 50 | 6 | 3 |
90 | 60 | 60 | 12 | 3 |
125 | 60 | 60 | 16 | 4 |