Features:

• Hassle free functioning

• Corrosion resistance

• Accurate outcome

• Easy to use 

Compliance with following International Standards

IP 124, ASTM D665, ASTM D3603

Brief construction details

• Rectangular reservoir (Inner chamber) constructed of 16 SWG, stainless steel with drain cock.
• Outer body made of 20 SWG, CRCA sheet duly powder coated.
• Thermal insulation provided in between the walls to prevent loss of temperature.
• Constant temperature oil bath is fitted with motorized stirrer  to maintain temperature at 60 °C ± 0.5 °C
• Oil immersion heaters are fitted to dissipate uniform heating.
• Temperature, speed and time are digitally indicated.
• Microprocessor based PID temperature controller with two  displays for set and process value.
• PT-100 sensor with 0.1 °C resolution on digital display.
• The bath can accommodate at least four test samples at a time with combined motor for each position
• Motor is mounted on ball bearing, driven by belts and pulleys.
• Supplied complete with 4 Nos test Beaker (400 ml) of Borosilicate glass with dimension as per ASTM standard.
• The test beakers are securely held in the bath by spring clips and are fitted with acrylic covers, dimension as per ASTM standard.

Details about Timer & Stirrer

• The unit is having motorized stirrer with digital RPM meter with proximity sensor to monitor the stirring speed.
• Stirrer rotates on its longitudinal axis at 1000 ± 50 rpm.
• Stirrer will be made of stainless steel as pr standard dimension given in the method.
• Test rod is also made of steel conforming to grade 10180 of specs A 108 BS 970 Part 1:1983-070M20 with dimension as per standard.
• In-built timer is provided in apparatus which stops the stirrer at pre-set time.

Technical Specifications

• Temperature range    : Ambient to 100 °C  ± 0.5 °C
• Stirrer Speed            : Up to 1000 rpm, ± 50 revolution/minute
• Power supply           : 230 Volt + 10 %, 1 phase, 50 Hz

Following accessories are supplied along with the equipment

1)    Thermometer ASTM 9C, ASTM 20C & ASTM 21C (1 each)  :  3 numbers

2)    Steel Test Specimen                                  : 4 numbers

3)    Test Beakers (400ml) with covers           :4 numbers

4)    Beaker cover (PTFE) for ASTM D665      : 4 Numbers

5)    Teflon holder (PTFE) for D665                 :4Numbers

6)    Auxiliary Stirrer Blade for ASTM D665 Procedure C (heavier than water fluids)  : 1 Number

Features:

• Hassle free functioning

• Corrosion resistance

• Accurate outcome

• Easy to use 

Compliance with following International Standards

IP 124, ASTM D665, ASTM D3603

Brief construction details

• Rectangular reservoir (Inner chamber) constructed of 16 SWG, stainless steel with drain cock.
• Outer body made of 20 SWG, CRCA sheet duly powder coated.
• Thermal insulation provided in between the walls to prevent loss of temperature.
• Constant temperature oil bath is fitted with motorized stirrer  to maintain temperature at 60 °C ± 0.5 °C
• Oil immersion heaters are fitted to dissipate uniform heating.
• Temperature, speed and time are digitally indicated.
• Microprocessor based PID temperature controller with two  displays for set and process value.
• PT-100 sensor with 0.1 °C resolution on digital display.
• The bath can accommodate at least four test samples at a time with combined motor for each position
• Motor is mounted on ball bearing, driven by belts and pulleys.
• Supplied complete with 4 Nos test Beaker (400 ml) of Borosilicate glass with dimension as per ASTM standard.
• The test beakers are securely held in the bath by spring clips and are fitted with acrylic covers, dimension as per ASTM standard.

Details about Timer & Stirrer

• The unit is having motorized stirrer with digital RPM meter with proximity sensor to monitor the stirring speed.
• Stirrer rotates on its longitudinal axis at 1000 ± 50 rpm.
• Stirrer will be made of stainless steel as pr standard dimension given in the method.
• Test rod is also made of steel conforming to grade 10180 of specs A 108 BS 970 Part 1:1983-070M20 with dimension as per standard.
• In-built timer is provided in apparatus which stops the stirrer at pre-set time.

Technical Specifications

• Temperature range    : Ambient to 100 °C  ± 0.5 °C
• Stirrer Speed            : Up to 1000 rpm, ± 50 revolution/minute
• Power supply           : 230 Volt + 10 %, 1 phase, 50 Hz

Following accessories are supplied along with the equipment

1)    Thermometer ASTM 9C, ASTM 20C & ASTM 21C (1 each)  :  3 numbers

2)    Steel Test Specimen                                  : 4 numbers

3)    Test Beakers (400ml) with covers           :4 numbers

4)    Beaker cover (PTFE) for ASTM D665      : 4 Numbers

5)    Teflon holder (PTFE) for D665                 :4Numbers

6)    Auxiliary Stirrer Blade for ASTM D665 Procedure C (heavier than water fluids)  : 1 Number