Other Products / Services #414322

We offer worm gear higher series. Product descriptionunderdriven sfuoverdriven sfoverticle output shaft updown sfvhollow output shaft ssmsizes 10 to 17ratio min. 5 : 1 to max 70 : 1power capacity 350 kw

We offer worm gear medium series. Product descriptionunderdriven snu-uoverdriven snu-overticle output shaft updown snu-vhollow output shaft snu-smsizes 4 to 10.5ratio min. 5 : 1 to max 70 : 1power capacity 139 kwrelated products

Heavy Duty Stirrer unit incorporates an extended bearing housing to accommodate a larger bottom bearing and increased shaft size, there by enhancing the unit capacity to absorb the high bending loads imposed during stirrer applications. This gear unit is compact with facility of top mounted pivoted platform where electricmotor can be directly mounted above the gear unit using belt tensioning device.

We offer worm gear small series. Product descriptionunderdriven snu-uoverdriven snu-overticle output shaft updown snu-vhollow output shaft snu-smsizes 1 58 to 3.54ratio min. 5 : 1 to max 70 : 1power capacity 12.5 kw

We offer heavy duty gear units. Product descriptionunderdriven sfuoverdriven sfoverticle output shaft updown sfvhollow output shaft ssmsizes 10 , 12 , 14, 17ratio min. 5 : 1 to max 70 : 1power capacity 350 kw

Elecon provides an online coupling product configurator for selection of couplings and then downloading its engineering drawing in pdf format.

Variable speed means the change of the speed of a driven machine in running condition. The elecon variable fill scoop fluid coupling is therefore located between a constant speed motor and driven machine.

Planetary gearboxes have much higher mechanical rating compared to parallel shaft gearbox as the power being transmitted gets equally distributed among three to five streams in each stage thus reducing the induced stresses which very much optimizes the size as well allows to accommodate higher ratio to eliminate open pair. The reduction in floor space as compared to conventional drive i.e with open gearing, almost to the tune of 50% reduction in floor space.

Elecon bucket wheel planetary gear units are available in various sizes ranging from 25 to 375 kw and reduction ratio ranging from 140 to 480. These gear units are especially designed for bucket wheel drive of stacker-reclaimer machines. The gear unit consists of four to five reduction stages comprising of bevel, helical and planetary being a last pair in the system. The gear units are available in hollow shaft design with shrink disc and have a integral drive frame for mounting electric motor and brake, with necessary fork for fixing the torque arm.

Elecon slewing gear units of planetary as well as bevel-helical type (conventional) are available in various sizes ranging from 1.5 kW and reduction ratio ranging from 400 to 1000. These gear units are especially designed for the slewing mechanism of the stacker-reclaimer machines. The planetary gear units normally have four-stage reductions out of which the first stage is designed as helical or bevel pair, and the remaining stages according to planetary gear systems. The conventional gear unit consists of five to six reduction stages comprising bevel and helical gear pairs.

We offer cooling tower fan drive gear unit incorporates an extended top bearing housing to accommodate the larger wheel shaft bearing. length of the output shaft extension are manufactured to client's requirements and to suit fan hub mounting. lubriction is entirely contained by splash and lower bearing dip in the oil bath while oil is pumped to the top wheel shaft bearing by mean of a built in plunger mechanism. All exposed parts other than the extensions are applied with corrossion resistant paint.

Ideally suitable for smooth and jerkless start and also act as energy saver. Product DescriptionType CD Without delayed filling chamberCDR With delayed filling chamberCDRP With extended delayed filling chamberCDRS With extended delayed filling chamber & controlled nozzleCDIR Reversed coupling with delayed filling chamberCDCDR R + ED Fluid coupling with gear coupling (Radially removable)

Elecon make geared coupling with standard design are available in design 1, design 2, design 3 and design 4 wherein distance shaft ends can be accommodated up to n4 dimension i.e. From 43 mm to 408 mm depending on size of the coupling. for the distance between shaft ends exceeding beyond n4 limit, elecon make et type of geared couplings are used to connect the driving and driven equipment. This type is provided with appropriate torsion shaft to accommodate required distance between shaft ends.

Flexible coupling is a cushioned drive type, transmitting the torque through rubber bushes which have excellent capacity to absorb shocks.

Elecon having the prior experience in the field of Wind Power, installed around 50 Nos. Wind Turbines of 300 KW rating during 1995 to 1998 in Gujarat. During the year 2001, ELECON decided to diversify the Wind Turbine Business and installed 2 WTGs of 600 KW in Gujarat and 2 WTGs in T.N as a prototype turbine. Elecon is now planning to expand its Wind Turbine business all over the world with it expertise in the field of manufacturing and strong infrastructure available at their plants at Vallabh Vidynagar, a town near Anand in Gujarat, India. With diversed focus, Elecon has decided to produce the Quality Wind Turbines in technical collaboration with TURBOWIND n.v of Belgium. With wide experience in the field Turbowind has worldwide installation of 600KW* Wind Turbines in many countries in Europe, India, Canada, Ukraine etc. working in diverse climatic conditions.

Elecon having the prior experience in the field of Wind Power, installed around 50 Nos. Wind Turbines of 300 KW rating during 1995 to 1998 in Gujarat. During the year 2001, ELECON decided to diversify the Wind Turbine Business and installed 2 WTGs of 600 KW in Gujarat and 2 WTGs in T.N as a prototype turbine. Elecon is now planning to expand its Wind Turbine business all over the world with it expertise in the field of manufacturing and strong infrastructure available at their plants at Vallabh Vidynagar, a town near Anand in Gujarat, India. With diversed focus, Elecon has decided to produce the Quality Wind Turbines in technical collaboration with TURBOWIND n.v of Belgium. With wide experience in the field Turbowind has worldwide installation of 600KW* Wind Turbines in many countries in Europe, India, Canada, Ukraine etc. working in diverse climatic conditions.

Keeping pace with the continuous development and in line with the philosophy of Elecon to offer innovative products, Elecon has developed a range of Elevator gears for passenger Elevator applications. Considering the market need of Traction Machine for 4 to 6 passengers capacity at an affordable price, Elecon has developed this machine to offer the cost effective product to the customers. These gears ensures smooth and quiet operation with low noise and vibrations for passenger comfort. The critical components of the unit are manufactured on the CNC machines to achieve high quality level and performance. Hi-tech measuring and testing aids ensure these unit meet desired design parameters for trouble free performance in the field.