Other Products / Services #530163

These can be cost effective and ideal for monitoring the temperature. Display shut-off facility is provided so that display can be made 'ON' only if required through push button. Thus it saves the battery power and results in long lasting battery operation.

Electronet seriesTT-01are Head mount or Din rail mount type temperature transmitters used for various industrial applications. It can accept input from RTD, J and K types of thermocouples. The temperature signal is transmitted in the form of electrical 4 - 20 mA signal. Span / Zero adjustments are easily accessible. These transmitters are suitable for any make of sensor.

ASIONIC- 400Wis designed to measure the velocity of a fluid in a sealed pipeline fitted with transducers. This enables calculation of flow and volume based on time of flight principle. ASIONIC 400W is a static water meter which has no moving parts to avoid wear and tear.

ASIONIC- 400W is an integral and hermetically closed static water meter intended for the registration of cold and hot water consumption. ASIONIC- 400W is constructed as a vacuum chamber of moulded composite material. Thus, the electronics are fully protected against penetration of water. This means that the meter can be work without problems in water submerged locations.
The meter can and must only be opened by Electronet's authorised service center by means of special tools, if the meter has been opened, and seal have thus been broken, the meter is no longer valid for billing purpose. Furthermore, the factory guarantee no longer applies. The water meter is powered by an internal lithium battery with up to 10 years lifetime. the battery can be changed by one of the Electronet's authorised service center / personnel.
The electronic unit having inbuilt LCD display to continuously indicate and log / record the following parameters:

The Turbine Flow meter is used for the measurement of liquid flow rate. It works on the principle of Turbine. A turbine flow meter is constructed with rotor and blades that use the mechanical energy of the fluid to rotate the rotor in the flow stream. Blades on the rotor are angled to transform energy from the flow stream into rotational energy. The rotor shaft spins on bearings - When the fluid moves faster, the rotor spins proportionally faster.

Electronet series orifice plate is the most common differential pressure primary flow element. It is based on proven technology. It has no moving parts and is suitable for high temperature and pressure applications. Orifice plates are recommended for clean liquids, gases and low velocity steam flows. Flow measurement using orifice plates requires the accurate location of up stream and downstream pressure tapping. Various types of orifice carrier assemblies are available to suit a wide range of applications.

Electronet series AFG-20 is Digital Air Flow Gauge for fast, easy & trouble free operation. The flow gauge works on differential pressure flow measurement principle. These can be cost effective & ideal for monitoring the flow rate of compressed air. Display shut-off facility is provided so that display can be made ON only if required through push button. Thus it saves the battery power and results in long lasting battery operation.

Electronet seriesDigital Pressure Gauge - PG 20are pressure gauges for fast, easy & trouble free operation. These can be cost effective and ideal for monitoring the pressure. Display shut-off facility is provided so that display can be made 'ON' only if required through push button. Thus it saves the battery power & results in long lasting battery operation.

Electronet seriesPT-22Sis Electronic Pressure Transmitter & Switche for fast, easy & trouble free operation.
These switches are designed to cover a majority of industrial applications such as gas, liquid etc. Analog output is 4-20mA & Pressure switch output is 2Amp.
Optocoupler phototriac & a power triac combination is used for switching, Optocoupler phototriac switch acts as an isolated driver and thus enables the driving of power triac by micro-controller.

Electronet series Magnetic Liquid Level GaugeELMLG-100is an instrument for indicating the fluid level.

It has a magneticfloat inside of the non-magnetic chamber and an indicator outside of it. The indicator indicates the fluid level by means of magnetic force of the magnet installed inside of the float.

The indicator is completely separated from the chamber. The level of liquid and gaseous phases can be distinguished clearly by the Bi-color. Magnetic level indicators are low-maintenance alternatives to sight glasses and other level indicators. They provide non-invasive level indication while reducing leak points and fugitive emissions.

Electronet series ELTAR-20 Radar Level Transmitter is high frequency level measurement instrument with the maximum measuring distance upto 30 meters. The antennais further optimized and the new-type microprocessor can perform higher rate of signal analysis and processing, making the instrument available for complex measurement conditions such as reactors and solid silos.

Electronet seriesLCS-02areCapacitance Type Level Switches. The vessel wall & probe forms two electrodes.

If the vessel is of non-conductive material, the probe will be double rod type. The distance between the electrodes and surface area of the electrodes remains unchanged. The variable is the depth of the material being measured which represents the dielectric constant between two electrodes. Air and vacuum have relative dielectric constant as 1 and that of liquids is greater than 1.

The capacitance of the capacitor therefore depends on how much material lies between the probe and vessel wall i.e. whether the probe is covered with or free from material. The capacitance changes with change in level of the material & provides switching output at the desired preset level.

Electronet seriesULT-200Bis a Battery Operated Ultrasonic Level Transmitters specially designed for non contact type level measurement. Ultrasonic level measurement is based on the time required by ultrasonic pulses to travel from sensor and surface of liquid and back to sensor. Ultrasonic level transmitters are the best for applications such as slurries, corrosive liquids and waste water without obstacle throughout the beam. The transmitter provides local indication through LCD.

Electronet seriesTX-100are Trip Amplifiers with single input, dual trip output specially used for various industrial applications.
It can interface inputs like Current or Voltage and provide isolated output in terms of Current or Voltage. The compact design saves inner space required in panel to mount the instrument.

Electronet SeriesDPI-160-1is Single Channel Bar-Graph Indicator specially designed for various industrial applications.

These can be used for monitoring parameters like Temperature, Humidity, Pressure, Flow, Speed, Level etc. The input and measuring range are settable through the keypad on front fascia and control output is available at the rear terminals. Retransmission output and communication port with Bar-Graph indication are additive features of DPC-160-1.

Electronet seriesSC-204is unique micro-controller based 8 /16 channel dedicated/universal input process scanner.
It is in most miniature size with multiple features. SC-204 can accept the input like RTD, Thermocouple, mA, Voltage, mV and display its processed value with optional alarm settings and communication port. All operating parameters are programmable through front membrane keypad. Individual LED display available for channel number, process value and engineering unit.

Electronet seriesCT-100Sare Conductivity transmitters used for various industrial applications.
It can accept input from conductivity electrode of cell constant 0.01 / 0.1 / 1 & conductivity signal is transmitted in the form of electrical 4 - 20 mA signal. The on-line conductivity indication is provided through LCD. Span/Zero adjustments are easily accessible.