Post Buy Requirement

EI

Electronics India

Solan, Himachal Pradesh, India

Add Review

Call 08068051322 Ext. 089

Our Products

Measuring Instruments & Equipment 9 Products available
Analyzers And Analytical Instruments 4 Products available
Laboratory Equipments 5 Products available
Laboratory Apparatus 11 Products available
Spectrophotometers 6 Products available
Others 10 Products available

Other Products / Services #963264

Differential Blood Cell Counter

Differential Blood Cell Counter

Model Number 368

We are offering differential blood cell counter.
Features

facility to count 8 types of cells
1.16 digits alphanumeric lcd display
automatic percentage (%) calculation
individual cells counting facility
in-built stop watch and timer function
audible beep facility

differential blood cell counter model-368 use microprocessor controlled system which offers accurate and quick differential counts. This cell counter is featured with reliability, accuracy, stability
and is a sleek device. These cell counters are available with 11 operating keys that are suitable for clinical labs for showing the primary bacterial or virus infections.

View Complete Details

Ask Latest Price & Details

Flame Photometer

Flame Photometer

Model Number 1385 & 1382
Weight 8 Kg (Approx.)

We are offering flame photometer.
Features

microprocessor based with printer interface
auto gas cutoff (model - 1385)
auto flame failure detection (model - 1385)
four measurements in single aspiration
setup storage facility
sample data storage facility
curve calibration programmability using maximum of 5 standards
multiple calibration curve saving facility
data processing through curve fitting techniques, least square, quadratic
online help key
direct results in ppm and meq
useful for medical & soil testing

microprocessor flame photometer - 1385 comes with flame failure detection and auto gas cutoff facility. In case of power failure, the gas cuts off automatically. In case the flame goes off accidently during work, the flame failure alarm sounds after few seconds
microprocessor flame photometers - 1385 & 1382 are used for the determination of sodium, potassium, calcium and lithium. They uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced and reproducibility. They have soft touch membrane key for ease of operations.
The sample solution is aspirated through an automiser. Sample, air and the fuel are mixed in the mixing chamber which is then sprayed as a very fine mist into the flame. The color of the flame is changed depending upon the concentration of elements present. Radiations from the flame passes through the sensing system and specific narrow band interference filter which permits only the characteristic radiation to pass to the photo-detector. The output of the photo-detector is then processed by the microcontroller and the final results are displayed on the 20 x 4 line alphanumeric lcd with backlit.
In both models 5-point calibration facility and non-linearity correction is provided through an automatic curve fitting software. Facility has been provided for re-standardization with a single standard, thereby, eliminating the need of the multiple standards once a calibration has been performed.

View Complete Details

Ask Latest Price & Details

Microprocessor Potentiometer

Microprocessor Potentiometer

Model Number 120, 121 & 122

We are offering microprocessor potentiometer.
Features

3 digit led display
soft touch keys
built-in stirrer
internal standard facility
burette assembly facility (optional)
rugged & economical
highly stable & accurate

microprocessor potentiometer is a solid state instrument designed to provide the precise potentiometric measurements. The instrument uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you through out the measurement process. The system has 3 soft touch membrane type keys for ease of operation. The instrument have built-in stirrer and internal standard facility.

View Complete Details

Ask Latest Price & Details

tap density tester

Tap Density Tester

Display 20×4 Alphanumeric LCD
Taps/Minute USP-I: 300± 15, USP-II: 250± 15

Complies with USP, IP specifications, Extremely useful for pharmaceutical labs, Microprocessor based, easy to use, 20 x 4 line alphanumeric LCD display with backlit, Automatically calculate result parameters like Tap Density, Initial Density, Compressibility Index and Hausner Ratio, User friendly operation with menus & current status indicators.Microprocessor Tap Density Tester, Model 1951 is a density measurement equipment used to measure tapped density of powders, as well as granulated or flaked materials by standardized and repeatable procedures. Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.

View Complete Details

Ask Latest Price & Details

Disintegration tester

Disintegration Tester

Up and Down Speed 30 rpm ± 2 rpm
Operating Temp. Range 0 – 100°C

Accurate time out provided by microprocessor based time totalizer, Baskets move Up & Down as per IPUSP test specifications, Digital Tablet Disintegration Apparatus Model-901 is designed for accurate estimation of disintegration time of tablets as per IPUSP standards. The instrument is designed to test tow batches of six tablets, simultaneously. The unit consists of two beakers having capacity of 1000 cc each. In these beakers, suitable disintegration media can be taken. These can be temperature controlled using a in-built heater and a highly thermostat fitted inside the instrument. Microprocessor based time totalizer is provided for accurate time readout.

View Complete Details

Ask Latest Price & Details

Auto Karl Fischer Titrimeter

Auto Karl Fischer Titrimeter

K.F.Dispensing Resolution 0.05 ml.
Sample Size 1-50 mg of Water

Auto Karl Fischer Titrimeter 761 is an automatic apparatus designed to carry out Karl Fischer Titrations for accurate determination of moisture content in various samples. The instrument comprises of two units i.e CONTOL UNIT & TITRATION UNIT. The CONTROL UNIT controls the complete automatic titration. On pressing the START button, the titration starts and the KF reagent is added automatically from the burette, through a solenoid valve into the titration vessel. As soon as the end point is reached, the titration is stopped automatically by the Control Unit. It has fully solid state circuitry incorporating advanced IC technology.

View Complete Details

Ask Latest Price & Details

TURBIDITY METER

TURBIDITY METER

Rated Power 230 V ± 10% AC, 50 Hz
Dimensions 245 x 260 x 125 mm (L x B x H) (Approx.)

Digital TurbidityNephelo Meter are ideal instruments for the measurement of suspensions. They consist of a light source focused on a test tube containing the sample solution under test. The light, reflected at a right angle to the focused light by the suspension in the solution, is detected by the photodiode detector, amplified and displayed on 3 digit seven segment LED display.

View Complete Details

Ask Latest Price & Details

Blood Cell Counter

Blood Cell Counter

Weight 1.5 kg (Approx.)
DIMENSIONS 250 x 230 x 150 mm (LxBxH)

Differential Blood Cell Counter Model-368 use microprocessor controlled system which offers accurate and quick differential counts. This cell counter is featured with reliability, accuracy, stabilityand is a sleek device. These cell counters are available with 11 operating keys that are suitable for clinical labs for showing the primary bacterial or virus infections.

View Complete Details

Ask Latest Price & Details

Microprocessor Colony Counter

Microprocessor Colony Counter

Min. Order (MOQ) 1 Piece(s)
Readout 0 - 999999 Count Correction Facility Average Mode Result-Count Storage Seven Segment LED Display Auto Marker Pen
Audible Confirmation of Each Count Uniform Glare Free Illumination Wolffhugel Glass Grid with Focusing Facility LED Based Illumination

We offer microprocessor colony counter.
Microprocessor colony counter is a solid state microcontroller based instrument designed for quick and accurate counting of bacterial & mould colonies in petri dishes. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.

the system has 6 soft touch membrane type keys for ease of operation. It has a 'reset' key to reset the digital count. Any unwanted count can be removed by pressing the 'correct' key. A built-in averaging facility allows the calculation of average colony counts using multiple dishes. It has the storage facility for 100 result-counts which are retained in the memory even when the instrument is switched off. A 'recall' key is provided to retrieve the stored result colony counts from the instrument memory.

optimum viewing of colonies is aided by peripheral glare free illumination graticuled disc provided in the instrument. The magnifier magnifies the colony area. This is an indispensable tool for the microbiologist.

Additional Information:

Payment Terms : T/T

Delivery Time : Dispatch within 4-5 weeks from the date of advance remittance in our account

View Complete Details

Ask Latest Price & Details

Microprocessor Kf Moisture Titrator

Microprocessor Kf Moisture Titrator

Min. Order (MOQ) 1 Piece(s)
Auto Computation of Moisture in ppm, %& mg H2O. Storage of Date, Time, Batch No. and Final Results
8-Digit Digital Display Motorized Dispensing

We offer microprocessor kf moisture titrator 1760 is the finest volumetric titrator available. It uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you throughout the titration process. This titrator eliminates the use of conventional delicate and fragile glass burettes and plunger systems. It uses a highly sensitive motorized dispensing system for precise control of titrant volumes. This titrator analyses the moisture concentration of liquid samples, powder, fine particles and fiber samples that are soluble in alcohol or solvents. The moisture content is displayed in ppm, %age and mg h2o.

the system has 24 soft touch membrane type keys for ease of operation. Complete numeric keypad is provided so as to feed the values of sample, density, titer factor, date, time etc. Comfortable. The end point indication is given by both visual led and audible alarm. The titrator has the facility for automatically calculating the titer factor of the karl fischer reagent. It uses the repeated averaging method so as to give the most accurate titer value. It has the storage facility of date, time, batch no. And final results of 20 titrations using the fifo method. The internal battery backup ;provision has been made to store the results and the other titration parameters for a minimum of 1 month even if the instrument is not switched on. Provision for external printer attachment is available so that any of the stored results can be printed even at a later stage.

Additional Information:

Payment Terms : T/T

Delivery Time : Dispatch within 4-5 weeks from the date of advance remittance in our account

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Electronics India (Electronics India)
Mr. Mohit Gupta & Mr. Abhishek Gupta Orion Industrial & Commercial Complex, Kalka-Shimla Road, Opposite Sector - 6, Kamli Pin code- 173220 Parwanoo, H, Solan, Himachal Pradesh
Share us via
Call 08068051322 Ext. 089

List of Other Products by Electronics India from Solan, Himachal Pradesh.

Post Buy Requirement

EI

Electronics India

Solan, Himachal Pradesh, India

Add Review

Call 08068051322 Ext. 089

Our Products

Laboratory Apparatus 11 Products available
Spectrophotometers 6 Products available
Measuring Instruments & Equipment 9 Products available
Analyzers And Analytical Instruments 4 Products available
Laboratory Equipments 5 Products available
Others 10 Products available

Other Products / Services #963264

Differential Blood Cell Counter

Differential Blood Cell Counter

Model Number 368

We are offering differential blood cell counter.Features facility to count 8 types of cells1.16 digits alphanumeric lcd displayautomatic percentage (%) calculationindividual cells counting facilityin-built stop watch and timer functionaudible beep facility differential blood cell counter model-368 use microprocessor controlled system which offers accurate and quick differential counts. This cell counter is featured with reliability, accuracy, stabilityand is a sleek device. These cell counters are available with 11 operating keys that are suitable for clinical labs for showing the primary bacterial or virus infections.

View Complete Details

Ask Latest Price & Details

Flame Photometer

Flame Photometer

Model Number 1385 & 1382
Weight 8 Kg (Approx.)

We are offering flame photometer.Features microprocessor based with printer interfaceauto gas cutoff (model - 1385)auto flame failure detection (model - 1385)four measurements in single aspirationsetup storage facilitysample data storage facilitycurve calibration programmability using maximum of 5 standardsmultiple calibration curve saving facilitydata processing through curve fitting techniques, least square, quadraticonline help keydirect results in ppm and mequseful for medical & soil testing microprocessor flame photometer - 1385 comes with flame failure detection and auto gas cutoff facility. In case of power failure, the gas cuts off automatically. In case the flame goes off accidently during work, the flame failure alarm sounds after few secondsmicroprocessor flame photometers - 1385 & 1382 are used for the determination of sodium, potassium, calcium and lithium. They uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced and reproducibility. They have soft touch membrane key for ease of operations.The sample solution is aspirated through an automiser. Sample, air and the fuel are mixed in the mixing chamber which is then sprayed as a very fine mist into the flame. The color of the flame is changed depending upon the concentration of elements present. Radiations from the flame passes through the sensing system and specific narrow band interference filter which permits only the characteristic radiation to pass to the photo-detector. The output of the photo-detector is then processed by the microcontroller and the final results are displayed on the 20 x 4 line alphanumeric lcd with backlit.In both models 5-point calibration facility and non-linearity correction is provided through an automatic curve fitting software. Facility has been provided for re-standardization with a single standard, thereby, eliminating the need of the multiple standards once a calibration has been performed.

View Complete Details

Ask Latest Price & Details

Microprocessor Potentiometer

Microprocessor Potentiometer

Model Number 120, 121 & 122

We are offering microprocessor potentiometer.Features 3 digit led displaysoft touch keysbuilt-in stirrerinternal standard facilityburette assembly facility (optional)rugged & economicalhighly stable & accurate microprocessor potentiometer is a solid state instrument designed to provide the precise potentiometric measurements. The instrument uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you through out the measurement process. The system has 3 soft touch membrane type keys for ease of operation. The instrument have built-in stirrer and internal standard facility.

View Complete Details

Ask Latest Price & Details

tap density tester

Tap Density Tester

Display 20×4 Alphanumeric LCD
Taps/Minute USP-I: 300± 15, USP-II: 250± 15

Complies with USP, IP specifications, Extremely useful for pharmaceutical labs, Microprocessor based, easy to use, 20 x 4 line alphanumeric LCD display with backlit, Automatically calculate result parameters like Tap Density, Initial Density, Compressibility Index and Hausner Ratio, User friendly operation with menus & current status indicators.Microprocessor Tap Density Tester, Model 1951 is a density measurement equipment used to measure tapped density of powders, as well as granulated or flaked materials by standardized and repeatable procedures. Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.

View Complete Details

Ask Latest Price & Details

Disintegration tester

Disintegration Tester

Up and Down Speed 30 rpm ± 2 rpm
Operating Temp. Range 0 – 100°C

Accurate time out provided by microprocessor based time totalizer, Baskets move Up & Down as per IPUSP test specifications, Digital Tablet Disintegration Apparatus Model-901 is designed for accurate estimation of disintegration time of tablets as per IPUSP standards. The instrument is designed to test tow batches of six tablets, simultaneously. The unit consists of two beakers having capacity of 1000 cc each. In these beakers, suitable disintegration media can be taken. These can be temperature controlled using a in-built heater and a highly thermostat fitted inside the instrument. Microprocessor based time totalizer is provided for accurate time readout.

View Complete Details

Ask Latest Price & Details

Auto Karl Fischer Titrimeter

Auto Karl Fischer Titrimeter

K.F.Dispensing Resolution 0.05 ml.
Sample Size 1-50 mg of Water

Auto Karl Fischer Titrimeter 761 is an automatic apparatus designed to carry out Karl Fischer Titrations for accurate determination of moisture content in various samples. The instrument comprises of two units i.e CONTOL UNIT & TITRATION UNIT. The CONTROL UNIT controls the complete automatic titration. On pressing the START button, the titration starts and the KF reagent is added automatically from the burette, through a solenoid valve into the titration vessel. As soon as the end point is reached, the titration is stopped automatically by the Control Unit. It has fully solid state circuitry incorporating advanced IC technology.

View Complete Details

Ask Latest Price & Details

TURBIDITY METER

TURBIDITY METER

Rated Power 230 V ± 10% AC, 50 Hz
Dimensions 245 x 260 x 125 mm (L x B x H) (Approx.)

Digital TurbidityNephelo Meter are ideal instruments for the measurement of suspensions. They consist of a light source focused on a test tube containing the sample solution under test. The light, reflected at a right angle to the focused light by the suspension in the solution, is detected by the photodiode detector, amplified and displayed on 3 digit seven segment LED display.

View Complete Details

Ask Latest Price & Details

Blood Cell Counter

Blood Cell Counter

Weight 1.5 kg (Approx.)
DIMENSIONS 250 x 230 x 150 mm (LxBxH)

Differential Blood Cell Counter Model-368 use microprocessor controlled system which offers accurate and quick differential counts. This cell counter is featured with reliability, accuracy, stabilityand is a sleek device. These cell counters are available with 11 operating keys that are suitable for clinical labs for showing the primary bacterial or virus infections.

View Complete Details

Ask Latest Price & Details

Microprocessor Colony Counter

Microprocessor Colony Counter

Min. Order (MOQ) 1 Piece(s)
Readout 0 - 999999 Count Correction Facility Average Mode Result-Count Storage Seven Segment LED Display Auto Marker Pen
Audible Confirmation of Each Count Uniform Glare Free Illumination Wolffhugel Glass Grid with Focusing Facility LED Based Illumination

We offer microprocessor colony counter. Microprocessor colony counter is a solid state microcontroller based instrument designed for quick and accurate counting of bacterial & mould colonies in petri dishes. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. the system has 6 soft touch membrane type keys for ease of operation. It has a 'reset' key to reset the digital count. Any unwanted count can be removed by pressing the 'correct' key. A built-in averaging facility allows the calculation of average colony counts using multiple dishes. It has the storage facility for 100 result-counts which are retained in the memory even when the instrument is switched off. A 'recall' key is provided to retrieve the stored result colony counts from the instrument memory. optimum viewing of colonies is aided by peripheral glare free illumination graticuled disc provided in the instrument. The magnifier magnifies the colony area. This is an indispensable tool for the microbiologist.

Additional Information:

Payment Terms : T/T

Delivery Time : Dispatch within 4-5 weeks from the date of advance remittance in our account

View Complete Details

Ask Latest Price & Details

Microprocessor Kf Moisture Titrator

Microprocessor Kf Moisture Titrator

Min. Order (MOQ) 1 Piece(s)
Auto Computation of Moisture in ppm, %& mg H2O. Storage of Date, Time, Batch No. and Final Results
8-Digit Digital Display Motorized Dispensing

We offer microprocessor kf moisture titrator 1760 is the finest volumetric titrator available. It uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you throughout the titration process. This titrator eliminates the use of conventional delicate and fragile glass burettes and plunger systems. It uses a highly sensitive motorized dispensing system for precise control of titrant volumes. This titrator analyses the moisture concentration of liquid samples, powder, fine particles and fiber samples that are soluble in alcohol or solvents. The moisture content is displayed in ppm, %age and mg h2o. the system has 24 soft touch membrane type keys for ease of operation. Complete numeric keypad is provided so as to feed the values of sample, density, titer factor, date, time etc. Comfortable. The end point indication is given by both visual led and audible alarm. The titrator has the facility for automatically calculating the titer factor of the karl fischer reagent. It uses the repeated averaging method so as to give the most accurate titer value. It has the storage facility of date, time, batch no. And final results of 20 titrations using the fifo method. The internal battery backup ;provision has been made to store the results and the other titration parameters for a minimum of 1 month even if the instrument is not switched on. Provision for external printer attachment is available so that any of the stored results can be printed even at a later stage.

Additional Information:

Payment Terms : T/T

Delivery Time : Dispatch within 4-5 weeks from the date of advance remittance in our account

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Electronics India (Electronics India)
Mr. Mohit Gupta & Mr. Abhishek Gupta Orion Industrial & Commercial Complex, Kalka-Shimla Road, Opposite Sector - 6, Kamli Pin code- 173220 Parwanoo, H, Solan, Himachal Pradesh
Share us via
Call 08068051322 Ext. 089