Electropneumatics & Hydraulics (India) Pvt. Ltd.

Talegaon, Pune, Maharashtra

• MOQ 1 piece
• Automatic GradeSemi Automatic, Automatic
• CertificationISO 9001:2008, CE Certified
• ConditionNew
• Warrenty1 Year
• Number Of FlowerCnc Tube Bending Machine
• Country of OriginIndia
• Availability2000-4000kg

Offers cnc boost benders. For bending of thick-walled, tight-radius tubes required in boiler, chemical and process industries. Features 1. Tubes from od 25 to 114 mm 2. Dt 9 3. Materials - ovality 8-10%, thinning 12-13% 4. Unlimited tube length 5. Capability of serpentine bends 6. Fully programmable closed loop (hydraulic servo) bend-boost speed and position control 7. Mandrel-less and tie rod-less operation in boost mode 8. Can be used for bending in both normal (with higher capacity) and boost modes 9.electropneumatics smartbend 310 with colour lcd touch screen and keyboard access.

We offer cnc 5x tube bending machine. For complex parts and high-volume bending, especially in the automotive industry features 1.tubes from od 3 to 80 mm 2. Push, turn, bend accuracy â±0.1 mms or degs 3. Fully programmable axes movement in close loop position and velocity feedback mode 4. Advanced on-line diagnostics, display of axes positionspeed, on-going sequence and error messages 5. Features such as automatic tube length compensation, spring back calculation and compensation, programmable tube loading position, multi-sequence bend capability, etc. Are available options are 1.bi-directional bending 2.variable radius, roll bending 3.multi-radius bending with multi-stack tools electropneumatics smartbend 310 with colour lcd touch screen and keyboard access

We offer cnc 2x tube bending machine. For bending of simple tubes in the automotive, furniture, boiler, plumbing industries. model unit 30cnc2x 65cnc2x 80cnc2x 100cnc2x max. Tube capacity (d x t)* mm 32 x 2 65 x 4 80 x 2 114 x 6 max. Bend radius (clr) mm 120 300 300 500 min. Bend radius in terms of d 1.5d 1.5d 1.5d 1.5d length over mandrel m 3 3 3 3 bend angle range deg 5 - 180 5 - 180 5 - 180 5 - 180 bend speed (accuracy) degs (deg) 50 (â±0.2) 24 (â±0.2) 18 (â±0.2) 12 (â±0.2) dbb speed (accuracy) mms (mm) 400 (â±0.1) 200 (â±0.1) 200 (â±0.1) 200 (â±0.1) pob speed (accuracy) degs (deg) 150 (â±0.1) 100 (â±0.1) 100 (â±0.1) 80 (â±0.1)

We are offering servo mechanical presses. Electropneumatics servo mechanical presses combine the speed and reliability of the eccentric drive mechanical presses and the flexibility of hydraulic presses with innovative electric servo technology to open up new opportunities for automotive, auto component, appliance and general engineering applications. Independent programmability of slide and cushion speeds and motion sequences make blanking, shallow drawing, trimming, coining, too tryout, transferprogressive die operations, etc. Possible on the same press. The large, high-performance ac torque motors drive the eccentric gear arrangement replacing the flywheel, clutch and brake and offering dynamic control over forming operations and energy savings. 1. Energy consumption less than conventional presses (even up to 40%). 2. Flexibility to perform different forming processes through slide and cushion speed, stroke and motion sequence programming- blanking, drawing, forming, progressive die operations, tool tryout, etc. 3. Higher productivity than conventional presses (sometimes up to 60%) since motion sequences can be optimally tuned and synchronised with automation devices. 4. Reduced vibration, impact and noise levels leading to superior part quality. 5. Improved die and press life, . Smaller footprint, especially for large bed presses. 6. Suitable for all materials, especially high strength steels. Features press forces up to 2000t available as single, double or triple action presses in ring frame or 4-column tie rod constructions slide motion and power from ac servo motor powered multiple reduction gear train and link mechanism slide adjustment hydraulic overload protection pneumatic slide counter-balance various die cushion options like conventional, active, multi-point, etc., programmable to suit application (hydraulic, pneumatic or electric ac servo)

We offer ydraulic powder compacting presses. Electropneumatics designs and builds tailor-made powder compacting and sintering presses for near-net shape forming of parts. Powders of iron, steel, high speed steel, carbides, ceramics, friction material, bronze, copper and their alloys can be formed into complex parts of high strength. Our presses can be used for dry and wet compacting and come with a wide variety of options, sophistication and automation for large volume, continuous production. These are hydraulic high-efficiency automatic presses that can be supplied with sophisticated precise tools and tool adaptors to ensure production of complex parts to high quality levels. Sintering and sizing presses are also available. features 1. Sturdy press frames, specifically design for long daylights and minimum deflection, in h-frame, ring frame, 4-pillar and 4-column constructions 2. Top, bottom and auxiliary ejection systems, as per requirement 3. High speed, high production models available 4. Incorporated with all safety features and diagnostic controls optional features are 1. Auto ejection system for specialised requirements 2. Mechanical knock-outs 3. Shock absorbers 4. Quick die change systems 5. Pick and place part transfer units 6. Automatic weighing arrangement 7. Staticfloating dies 8. Magnetisingdemagnetising unit 9. Filter-cloth slurry cleaning arrangement 10.supply of tool adaptors 11. Electropneumatics’ intelligent, user-friendly interface and plccnc controls for real-time programming and monitoring of all process parameters

We offer die spotting presses. The need for quick and reliable diemould tryout is constantly increasing because of the increasing number of new models and smaller batch quantities that are being produced in the automotive industry. In addition, forming processes have become complex, especially with the newer difficult materials. Therefore, it has become necessary to break-in and prove dies (new and reconditioned) well in advance of production start to save expensive production time. Electropneumatics’ die spotting and tryout presses have all the features needed to accurately simulate the actual manufacturing process for die prove-out. These presses can be used for die inspection, mould finishing and limited batchprototype production. features 1. 4-pillar and 4-column constructions with accurate slide guiding arrangement 2. Upper 90° swing-out platenslide for easy access to upper die half 3. Shuttle table to load dies and work on lower die half 4. Automatic and manual locking devices for operator safety while working to tool 5. Micro-inching facility with accuracy of ±0.1 mm 6. High speed slide approach and return functions 7. Large bed sizes available 8. Electropneumatics’ smartcncplc control system and user interface

Ideal for bending of automotive wire components like door locks, hood support, actuator levers and also consumer and interior decoration items. Features 1. Wires from OD 2 to 6 mm 2. Push, turn, bend accuracy ±0.1 mms or degsec 3. Bending in clockwise and counter-clockwise directions 4. AC servo motor all-electric push, turn bend axes 5. Fully programmable axes movement in close loop position and velocity feedback mode 6. Complex curved parts possible by interpolation of feed and bend axes 7. Capable of producing zigzag, multi-plane, curvature and helix bends 8. Electropneumatics’ SMARTBEND 310 with colour LCD touch screen and keyboard access

We offer special tube benders. Customised solutions for bending sectional profiles, different tube materials, thin-walled tubes, etc. Into complex shapes. 1. Chassis benders - for bending of square, rectangular or tubular section tubes of chassis long members of suv, trucks and commercial vehicles 2. Section coilers - for forming sectional profiles of hvac applications into coils and serpentines 3. Section benders - for bending of sectional profiles of luggage, furniture, automotive accessories into complicated configurations 4. Multi-plane hot bending modules- for hot bending of solid rods such as stabilizer and torsion bars in multiple planes with multiple bends 5. Portabend - for all pipe fitting applications such as sawing, idod deburring, bending, ferrule presetting, etc. It is a universal mobile tube-working station.

We offer chassis manufacturing equipment. Electropneumatics builds heavy-duty machines for production of chassis long members, cross members, tubular frames and other such heavy structural components for the automobiles. the different models available can blank, form, trim, bend and punch holes through programmable cnc controls. some models are completely automated from loading to unloading while others can be automated as per requirement. Some of the equipment available: heavy duty presses for blanking, punching and trimming turret punching and shearing machines flat and web punching machines web and flange punching machines plate and angle punching machines bending machines highly productive and most suitable for large volume production of long chassis members models available for processing of plates, sheets, sections machines are suitable for operations such as punching, blanking, trimming, shearing, bending, etc.

we offer hydraulic metal forming presses. electropneumatics presses for metal forming are available in different constructions and with a wide variety of features for applications such as deep drawing, stamping, trimming, cold extrusion, coining, hemming, blanking, press fitting and riveting, etc. we offer hydraulic and mechanical presses with servo drive options (hydraulic or electric). we can provide all the features and levels of sophistication and automation to meet the varied requirements of forming different materials (such as mild steel, aluminium, high strength steel, alloy steels, etc.), part intricacies and cycle times. available as single, double or triple action presses in c-frame, h-frame, 4-pillar, ring frame, straight-sided, 4-column constructions torsion and deflection resistant, rigid fabricated press structures, optimized at design stage and manufactured to high quality standards 1. accurate, lubricated slide guiding arrangements and pre-stretched tie-rod arrangement in column presses. 2. various die cushion options like conventional, active, multi-point, etc., programmable to suit application. 3.powered by high-performance hydraulic systems with conventional, proportional and servo controls. 4. provided with necessary safety features and on-line monitoring systems. optional features that can be provided are die cushions ejectors blank holder mechanical knock-outs shock absorbers quick die change systems coil feed lines transfer systems loaders, unloaders, rotarylinear tables, etc. electropneumatics� user-friendly relay logicplccnc controls with advanced diagnostic capabilities for process optimisation and sequence setting