Other Products / Services #5469625

Classic design - technical parameters:Type: LB-E27-1060-5KReplacement Wattage [W]: 75Power consumption [W]: 13CCT [K]: 5 000Base: E27Luminous flux [lm]: 1 060Average lifetime [h]: 15 000Dimmable: YesDimension [wh] [mm]: 11860Luminosity [cd]: 240

The power supply is adevice used for processing AC voltage supplied from the network to the low voltage needed to power components such as videophones, bells, controllers, security systems. Power supply (stabilized and un-stabilized) has afixed output voltage 12 / 24V DC (AC) optionally regulated from 5V.

They are used for switching, controlling and signalling. Variable assemblies when you can configure abasic module: switch, button, button or switch with middle position LED, flashing LED, etc.

They monitor the level of conductive liquids in wells, tanks, reservoirs, etc. They can monitor from one to six levels of water with optional fill / drain functions. These are either separately marketable products, or directly involved in the setup with acontactor or motor starter.

Earth socket NEW! Safety spring operated cover plate for earth socket (French type): white, ivory, ice, pearl, aluminium, dark grey.1-fold, 2-fold, 3-fold, 4-fold and 5-fold in a wide variety of colors and designs.

USING

• In combination with the switching unit for automatic light control (cellar, garage, etc.), or switching on a GSM gate
• By means of the Smart RF box, detection can be displayed on your smart phone in the form of a notification; alarms are stored in the history, which is visualized in the application iHC.

FUNCTION

• Anti-tamper function: an alarm is triggered if there is an unauthorized interference to detector (disassembly, power outage, ).
• Communication frequency with bidirectional protocol iNELS RF Control.
• Low Battery Alerts on Your iHC App.

TECHNICAL PARAMETERS

• Supply: battery 1 x 3 V CR2032, the battery life is around 1 year
• Low battery indication: yes
• Transmission frequency: 868 MHz, 915 MHz, 916 MHz
• Operating temperature: -10 - +50C
• Diameter of the connecting wire: 0.2 - 0.75 mm2
• (24-18 AWG)

DESCRIPTION

• Single thermostat for temperature monitoring and regulation in range -30 C to +70 C (-22 F to 158 F) in six ranges.
• Function of short-circuit or sensor disconnection monitoring.
• Possibility to set function heating/cooling.
• Adjustable hysteresis (sensitivity) , switching by potentiometer in range 0.5 to 5C/ 32.9 to 41 F.
• Choice of external thermo sensors with double insulation in standard lengths 3, 6 and 12 m (9.8, 19.7 and 29.5).

TECHNICAL PARAMETERS

• Multivoltage supply AC/DC 24 -240 V, not galvanically separated.
• Output contact: 1x NO - SPST 16 A /250 V AC1.
• 1-MODULE, DIN rail mounting.

Astronomical time switch Timer with an astronomical program to control the lighting without using a light sensor.Two-channel design, where each channel is programmable independently of the other. By entering the geographic coordinates, the lighting can be switched onoff by sunrise and sunset. During programming, 120 minutes may be added to the time of sunrise and sunset.

Dimmable ballast LBC3-02M is a dimming analog two-channel actuator designed for control of dimming light ballasts with signal 1-10V.During analog voltage output 1-10V control, relay contact automatically switches power supply to light ballast (0%=relay OFF, 1-100%=relay ON), LBC3-02M contains 2 independent analog voltage outputs 1-10V and their dependents 2 relays with potential-free contact.Each of two-channels is separately controllable and addressable.

Serves as control of the device on the basis of ambient light intensity. External version in IP65. Twilight switch contact closes by decreasing of ambient light intensity, and opens by its increasing. Used for switching of devices at twilight and at night (traffic and garden lighting, lighting of shop windows, commercials).Light switch contact closes by increasing ambient light intensity, and opens by decreasing light intensity. Used for switching of devices by reaching of pre-set ambient light level, usually sun shine (pulling down the shutters or blinds, activation of solar panels), adjustable (by jumper) ranges of light level.

Dali ballasts Unit EMDC-64M is designed to control electronic ballasts DALI and DMX receivers from the iNELS.EMDC-64M allows you to control up to 64 independent electronic ballasts DALI (Digital Addressable Lighting Interface) for fluorescent, LED and other lamps.Gateway to control DALI and DMX lighting ballasts, Control is possible from the iNELS BUS System via the system bus EBM or from the RF Control wireless transmitters. Selection of control (RFEBM ) and controlled (DALIDMX) interface is done via DIP switches on the front panel of the unit.

Digital room thermostat Night-time switching is done by push button or by external contact (ATR only), The night drop setting is done by the auxiliary controller (under the main controller and only ATR, ATF).Set offset (calibration 10 C) with a "known" thermometer.

Socket French type with earth pin 16A - 250V, NEW! Safety spring operated cover plate for earth socket (French type): white, ivory, ice, pearl, aluminium, dark grey.White, ivory, ice, pearl, aluminium, dark grey.1-fold, 2-fold, 3-fold, 4-fold and 5-fold in a wide variety of colors and designs.