Centralized Control Panel, Size : Multisizes, Voltage : 110V, 220V, 380V, 440V

Listing ID #1521096

Get Latest Price

SizeMultisizes
ApplicationControl Panel
Voltage110V, 220V, 380V, 440V
Power1-3kw, 3-6kw, 6-9kw, 9-12kw
Supply Type Manufacturer, Exporter, Supplier

Preferred Buyer From : All over the world

View More Details

Send Enquiry

Product Details

Size Multisizes
Application Control Panel
Voltage 110V, 220V, 380V, 440V
Power 1-3kw, 3-6kw, 6-9kw, 9-12kw
Power Source Electric
Autoamatic Grade Automatic
Warrenty 5 Years

We provide high technology Centralized Control Panel that is highly appreciated in the various industries. We are well reckoned as one of the supreme Centralized Pressure Control Panel Manufacturers based in India. Incorporation of advanced technology parts in our Centralized Control Panel assures accurate results and excellent performance.
The control panel consists of air hydro pump to develop hydrostatic pressure. The operation of the pump is achieved with the help of compressed air with a working pressure of 3 to 6Kg/ cm². This is a self reciprocating pump with a provision of controlling the pressure from 1.5 to 15Kg/ cm² of type test and 5 to 50Kg / cm² in case of acceptance test. Each testing station is provided with isolating valve bleed system, electrical contact type pressure gauge, range 0-16Kg / cm² in case of type test and 0-60Kg/ cm² in case of acceptance test, hour meter to register the total time the sample under test pressure, pressure regulator to adjust the test pressure inside the hydraulic accumulator and compressed air controls to operate the air hydro pumps. The system is provided with electrical interlocking with pressure gauge and solenoid valve to maintain required test pressure in the sample which in under test and to put off the hour meter if the pressure in the specimen or temperature in the type test water bath drops.
Bleed system is provided in the control panel to bleed out air trapped in the specimen while assemblying the same with locking plugs. Provision for ca liberating the pressure gauge constantly in use with master gauge (optional) is provided in the control panel, so that the caliberation of gauges can be done without removing the same from the panel.
A caliberation master gauge, can be supplied with caliberation certificate at an extra cost. We can offer the following combinations of control panel.
Model

EEC PT-1 : 1 Acceptance/ type test station

EEC PT-2 : 1 Acceptance Plus 1 Type Test station

EEC PT-3 : 1 Acceptance Plus 2 Type Test station

EEC PT-4 : 1 Acceptance Plus 3 Type Test station

EEC PT-5 : 1 Acceptance Plus 4 Type Test station

EEC PT-6 : 1 Acceptance Plus 6 Type Test station

Working Pressure
Type test station	1.5 to 25 kg (0.15 to 2.5 MPA)
Acceptane test	.5 to 100 kg (.5 to 10 Mpa)
Power supply	230 Volt single phase 50 Hz AC
Power consumption	500 Watts max.
Compressed air
Pressure	7Kg / cm²
Consumption	45 LPM (1.5 CFM)
Water	1/2" Pipe connection from an overhead tank preferably soft water.

Standard Accessories
High pressure hose pipe 3 mtr. Length 1 No. with each testing station.

Optional Accessories
master pressure gauge calibrated from an approved testing laboratory with certificate at an extra cost. Above equipment with type test station are suitable for hydrostatic creep repture test for hdpe popes as per IS : 4984-2000.

Interested in this product? Ask for more details & Latest Price from seller

Send Enquiry

Tell us your Buy Requirement to Get Instant Response