My ExportersIndia

For Buyer

For Seller

For Help

Our Products

Our Complete range of products are Screw Studs, Fuse Terminal, Solar Boxes, Solar Junction Boxes and Micro Terminal.

Marking Labels

Marking labels are used for identification of circuit connections. Marking of terminals helps in easy identification and quick maintenance. Marking labels are made of Polyamide in white colour and pre-printed with black indelible ink. They are used to serve different purposes like alpha-numeric identification required for accurate wiring and trouble shooting. Marking labels are available in strips containing 10 markers.
View Complete Details

Solar Connectors

  • Country of Origin 1000 V DC
  • Contact Material Copper with Tin Plating
  • Contact Resistance <0.5 Nm
  • Insertion Force ≤50 N
solar connectors is provided with hexagonal nut for fixing and tightening it on the mounting surface: a rubber o-ring is kept between panel surface and the wall of the photo voltaic devices. elmex connector has mating compatibility with elmex make straight connector EMPV4.
View Complete Details

Shorting Link

Interconnecting links or shorting links are used to interconnect two or more terminal blocks of same type and at the same potential. it is recommended that factory made shorting links which are designed considering the rated current of the terminal block and its pitch are used for interconnection purpose rather than looping by wire which is not a reliable practice.
View Complete Details

End Rail Clamp

End clamps also known as End Stoppers are used to hold a stack of terminal blocks on the mounting rail. Depending on the profile of the terminal block stack and the mounting channel, end clamps are available in different sizes and also in different designs. They are either made from Polyamide or Mild Steel duly plated. It is recommended that while selecting the end clamp. due consideration is given to the strength of the support required by the clamp. This is to ensure that the selected end clamp firmly supports the terminal block stack and prevents its movement on the rail and also its dislodging from the rail during normal handling or wiring.
View Complete Details

Terminal Screw

While standard Screw Clamp or Spring Clamp terminal blocks are designed for direct connection of conductors, (solid, stranded, flexible), simply after stripping the insulation, there are other wiring practices and applications where conductors have to be provided with ring type or fork types lugs, for more secured connections.
View Complete Details

Feed Through Terminals

The proven screw clamp & spring clamp design offers high contact force and is easy to use. The range covers terminals for conductor sizes from 0.5 sq mm to 95 sq mm for screw clamp and 0.5 sq mm to 16 sq mm for spring clamp.Spring Loaded Terminals employ compression springs below the contact clamp assembly, for better and more reliable connection for high vibration applications.
View Complete Details

K Type Thermocouple

A thermocouple is a bi-metallic junction ie a junction between two different metals that produces voltage related to temperature difference. Thermocouples are classified depending on different alloys used for different temperature ranges.Thermocouple terminal blocks are constructed using the same type of metal alloy as that of thermocouple intended for measuring temperature. Thermocouple terminal blocks are used in pairs.
View Complete Details

Terminal Panels

  • Height (mm) 40
  • Width (mm) 102
The Panel Mounted terminals of elmex range are so designed as to fit on any panel surface. The terminals are stackable and can be fixed on the surface with the help of fixing screws at the end.
View Complete Details

DIN Connector

DIN rails are available in 35 mm Top Hat section (7.5 mm and 15 mm deep), 32 mm ("G" Section) and 15 mm width. These channels are made of mild steel. Channels of 300, 500 and 1000 mm (with or without slot) are available as standard lengths. All channels are Alkaline Zinc plated with yellow or blue passivation. Channels with RoHS compliant plating are also available against special orders.
View Complete Details

Power Distribution Block

Distribution blocks are an Innovative Engineering Solution to satisfy customer's needs. They find application in Power Distribution for Control Circuits and can also be used to centralize earthing for the entire panel. These blocks are completely shrouded and accommodate single input and multiple outputs. They replace conventional open Bus-Bars, ensuring perfect continuity
View Complete Details

Bus Bar Connector

  • Width 75
  • Height (mm) 51.50
The lugs are bolted to the current bars using standard spanners in types CBT110T upto 300T, the current bar is tapped and the fixing bolt has slotted head, which allows use of screw-driver for bolting. This is useful where space is a constraint. The Melamine Terminals are available for terminating 35 sq mm to 95 sq mm cables.
View Complete Details

Screw Studs

Stud Type Terminals in Melamine Housing are specifically developed for termination using Ring Fork Type Lugs and provide a very reliable connection against vibration. They are available in two types : 1) Screw driver operated 2) Nut driver operated The range covers terminals for conductor sizes from 0.5 sq mm to 35 sq mm
View Complete Details

Fuse Terminal

Applications in Control & Automation require fuse protection facility. elmex offers Terminal Blocks with built-in safety fuse levers. These Terminal Blocks accommodate a glass cartridge fuse of 5 mm x 20 mm, 5 mm x 25 mm or 6 mm x 32 mm size.
View Complete Details

Cartridge Fuse

These Terminal Blocks accommodate a glass cartridge fuse of 5 mm x 20 mm, 5 mm x 25 mm or 6 mm x 32 mm size. The fuse holder is made of special grade phosphor bronze and hence offers low contact resistance. A solid brass link type DL4 in place of the fuse makes it possible to use it as a disconnection type terminal block. KUDDF4 is a fuse terminal and a standard terminal block (feed through) combined in one housing, giving cost, time and space economy. It occupies the space of one terminal block and works as a pair of terminal blocks - the upper tier with fuse protection.
View Complete Details

Slotted Channel

slotted channel used have accurate dimensions within permissible tolerances. If the mounting dimensions are less than specified then the attachment of the terminal blocks on these rails will not be strong enough and there could be problems of loose fittings and at times terminal blocks may get dislodged from the channel even in normal service conditions.
View Complete Details

Safety Fuse

The fuse holder is made of special grade phosphor bronze and hence offers low contact resistance. A solid brass link type DL4 in place of the fuse makes it possible to use it as a disconnection type terminal block. KUDDF4 is a fuse terminal and a standard terminal block (feed through) combined in one housing, giving cost, time and space economy.
View Complete Details

Solar Boxes

solar boxes has simple and cost effective assembly designed with snap fit locking arrangement with IP 65 protection sealing requirement for PV industry.
View Complete Details

Solar Junction Boxes

junction box for electrical connection from PV Crystalline module as a solution for easy and reliable interconnection from PV module to DCAC converters. elmex Junction Box has simple and cost effective assembly designed with snap fit locking arrangement with IP 65 protection sealing requirement for PV industry.
View Complete Details

Tape Wound Core

These Current Transformers are designed for secondary current of 1A or 5A and the primary current ranging from 5A to 7500A depending on the application of the system load current. Basic Construction in three different Groups, meeting various application requirements: Polycarbonate Encapsulated Rectangular Ring Type CT
View Complete Details

Polycarbonate Resin

electrical industry & providing termination solution for the last five decades & Now serve larger segment of this industry, we are adding instruments transformers, both current & voltage Transformers to our range of product.
View Complete Details

Low Tension Current Transformers

low tension current transformers has been serving electrical industry & providing termination solution for the last five decades & Now serve larger segment of this industry, we are adding instruments transformers, both current & voltage Transformers to our range of product.
View Complete Details

Ring Type Current Transformers

we are adding instruments transformers, both current & voltage Transformers to our range of product.Group of Current Transformers designed & constructed in compliance with below standards:Transformers have been successfully tested in ERDA, Vadodara for type test as per IEC: 61869-2. elmex has set up all the test facilities in- house to conduct all routine tests as well as certain type test.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us