Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Battery Charger

Listing ID #3969015

  • Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer From : All over the world

These Battery Charger are specially designed for Diesel Generators / Engine Start applications taking specific requirements into consideration. These are based on SMPS technology adopting latest Pulse Width Modulation technique. Various available ranges are as follows 12 Volts, 6 Amps: Suitable for Single Battery upto 100 Ah capacity 12 Volts, 10 Amps: Suitable for Single Battery above 100 Ah upto 200 Ah capacity 24 Volts, 10 Amps: Suitable for Two Batteries in Series upto 100 Ah each Battery capacity
View More Details
Send Enquiry

Company Information

  • Member Since 7 Years
  • Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

Technical Specifications 24V, 10A 12V, 10A 12V, 6A
Electrical Characteristics
Input Voltage 170 – 300V AC 170 – 300V AC 150 – 300V AC
Output Voltage-Boost mode 27.4 – 28V DC 14V DC 14V DC
Output Voltage-Float mode 26.2 V DC 13.4V DC 13.4V DC
Charging Current-Boost mode 10A 10A 6A
Charging Current-Float mode 0 – 4A 0 – 4A 0 – 2.5A
Leakage Current @ 230 V ac < 2mA < 2mA < 2mA
Line regulation < 1% < 1% < 1%
Load regulation < 1% < 1% < 1%
Ripple content 150mV p-p 150mV p-p 150mV p-p
Dielectric strength
Between Input & Output 2 kV AC 2 kV AC 2 kV AC
Between Input & Earth 1.5kV AC 1.5kV AC 1.5kV AC
Between Output & Earth 1.5kV AC 1.5kV AC 1.5kV AC
Protections
In rush current Limited by NTC Thermistor
Over voltage at Input Shut down above 300V AC
Under voltage at Input Cutoff at 140V AC. Cut in at 160V AC
Over voltage at Output 29.5V 15.5V 15.5V
Short circuit at Output Protected Protected Protected
Overload at Output Protected Protected Protected
Reverse polarity of Battery Protected Protected Protected
Over voltage due to external source Protected Protected Protected
Other Features
Indications Mains ON, Boost mode, Float mode, Battery Reverse
Annunciation Potential free NO/NC contact for Charger ON/FAIL
Mechanical
Type of mounting Wall mounting Type
Dimensions WxDxH 195x128x95 185x125x65 175x115x60
Short circuit at Output Protected Protected Protected
Weight (Approx.) 1500g 1200g 1000g
Environmental
Operating Temperature 0 – 50 Deg.C
Operating Relative Humidity 0 – 80% Max.
Vibrations 10 – 500Hz 2G-10min. / 1 Cycle 60 min. along all three axes

 

Company Details close-icon

Established in the year 2006, we “Enermax Systems” are located at Nashik (Maharashtra, India). We are constantly focusing towards alleviating the world's most pressing environmental challenges by developing green lighting solutions, Power Electronics & Solar Products that reduce operating costs, improve productivity & save money. Enermax is leading the way into a new era of environment and human friendly LED Lighting thereby helping to shape the future of lighting technology & Innovation in Power Electronics and Solar Products. In our range of products, we have Switched Mode Power Supply, Battery Chargers, LED Drivers, Solar Water Heaters, Solar Charge Controllers, Solar Power Packs, LED Lights, UPS Inverters, etc. Situated at Nashik (Maharashtra, India), we are supported by state-of-the-art infrastructural base in order to manufacture the offered array of products. Further, the infrastructural base is segregated into various divisions such as procurement, production, quality testing, R&D, sales & marketing, warehousing & packaging, etc.
By maintaining a strict approach towards quality, we assure our clients that products offered by us are designed and manufactured utilizing high grade components and innovative technology. The production process takes place under the supervision of quality controllers at our advanced production division. Our range of lighting solutions is widely acknowledge in the market due to attributes such as high illumination, longer service life, optimum functionality, durability and easy installation. Being a client-centric organization, we offer product range in various specifications at market leading prices. By following ethical business policies and maintaining transparency in all our dealings, we have managed to maintain long term associations with our esteemed clients across the nation.
  • Nature of Business Manufacturer / Exporter / Supplier / Retailer
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for Battery Charger?

Quantity
Seller Contact Details
  • Seller ENERMAX SYSTEMS
  • Address Ambad, Nashik, Maharashtra
Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice
Battery Charger at Best Price in Nashik - ID: 3969015 | ENERMAX SYSTEMS
Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Battery Charger

Listing ID #3969015

  • Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer From : All over the world

These Battery Charger are specially designed for Diesel Generators / Engine Start applications taking specific requirements into consideration. These are based on SMPS technology adopting latest Pulse Width Modulation technique. Various available ranges are as follows 12 Volts, 6 Amps: Suitable for Single Battery upto 100 Ah capacity 12 Volts, 10 Amps: Suitable for Single Battery above 100 Ah upto 200 Ah capacity 24 Volts, 10 Amps: Suitable for Two Batteries in Series upto 100 Ah each Battery capacity
View More Details
Send Enquiry

Company Information

  • Member Since 7 Years
  • Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

Technical Specifications 24V, 10A 12V, 10A 12V, 6A
Electrical Characteristics
Input Voltage 170 – 300V AC 170 – 300V AC 150 – 300V AC
Output Voltage-Boost mode 27.4 – 28V DC 14V DC 14V DC
Output Voltage-Float mode 26.2 V DC 13.4V DC 13.4V DC
Charging Current-Boost mode 10A 10A 6A
Charging Current-Float mode 0 – 4A 0 – 4A 0 – 2.5A
Leakage Current @ 230 V ac < 2mA < 2mA < 2mA
Line regulation < 1% < 1% < 1%
Load regulation < 1% < 1% < 1%
Ripple content 150mV p-p 150mV p-p 150mV p-p
Dielectric strength
Between Input & Output 2 kV AC 2 kV AC 2 kV AC
Between Input & Earth 1.5kV AC 1.5kV AC 1.5kV AC
Between Output & Earth 1.5kV AC 1.5kV AC 1.5kV AC
Protections
In rush current Limited by NTC Thermistor
Over voltage at Input Shut down above 300V AC
Under voltage at Input Cutoff at 140V AC. Cut in at 160V AC
Over voltage at Output 29.5V 15.5V 15.5V
Short circuit at Output Protected Protected Protected
Overload at Output Protected Protected Protected
Reverse polarity of Battery Protected Protected Protected
Over voltage due to external source Protected Protected Protected
Other Features
Indications Mains ON, Boost mode, Float mode, Battery Reverse
Annunciation Potential free NO/NC contact for Charger ON/FAIL
Mechanical
Type of mounting Wall mounting Type
Dimensions WxDxH 195x128x95 185x125x65 175x115x60
Short circuit at Output Protected Protected Protected
Weight (Approx.) 1500g 1200g 1000g
Environmental
Operating Temperature 0 – 50 Deg.C
Operating Relative Humidity 0 – 80% Max.
Vibrations 10 – 500Hz 2G-10min. / 1 Cycle 60 min. along all three axes

 

Company Details close-icon

Established in the year 2006, we “Enermax Systems” are located at Nashik (Maharashtra, India). We are constantly focusing towards alleviating the world's most pressing environmental challenges by developing green lighting solutions, Power Electronics & Solar Products that reduce operating costs, improve productivity & save money. Enermax is leading the way into a new era of environment and human friendly LED Lighting thereby helping to shape the future of lighting technology & Innovation in Power Electronics and Solar Products. In our range of products, we have Switched Mode Power Supply, Battery Chargers, LED Drivers, Solar Water Heaters, Solar Charge Controllers, Solar Power Packs, LED Lights, UPS Inverters, etc. Situated at Nashik (Maharashtra, India), we are supported by state-of-the-art infrastructural base in order to manufacture the offered array of products. Further, the infrastructural base is segregated into various divisions such as procurement, production, quality testing, R&D, sales & marketing, warehousing & packaging, etc.
By maintaining a strict approach towards quality, we assure our clients that products offered by us are designed and manufactured utilizing high grade components and innovative technology. The production process takes place under the supervision of quality controllers at our advanced production division. Our range of lighting solutions is widely acknowledge in the market due to attributes such as high illumination, longer service life, optimum functionality, durability and easy installation. Being a client-centric organization, we offer product range in various specifications at market leading prices. By following ethical business policies and maintaining transparency in all our dealings, we have managed to maintain long term associations with our esteemed clients across the nation.
  • Nature of Business Manufacturer / Exporter / Supplier / Retailer
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for Battery Charger?

Quantity
Seller Contact Details
  • Seller ENERMAX SYSTEMS
  • Address Ambad, Nashik, Maharashtra
Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice