Carbon steel tanks or stainless steel with apron, skirted, legged, or elevated support systems. Additional accessories such as ladders, catwalks, level indicators, round to square transitions, oversized flanges, explosion vents, and hatches can be integrated into any custom design.

We manufactureAir Receivers of different capacity and offer testing of the same with 100%Radiography, HydroTest, SR etc., inspected and approved by third party agency.We are renowned in the industry as one of the premiere manufacturers ofAir Receiver.

We are a prominent name in the engineering and fabrication industry as a manufacturer of industrial process equipment like vessels, chimneys, pipes& fittings, M.S. Silos, Steel Silos, Self-Supported, Fabricated Pipes, Fabricated M.S Pipes, Fabricated S.S Pipes, Stainless Steel Pipes, Pipe Fittings, M.S/S.S Fabricated Elbows, M.S/S.S Fabricated Bends, M.S/S.S Fabricated Tees, Mild Steel Pipes. We are also a service provider involved in offering stainless steel fabrication services to our clients across India. Our products and services reflect unparalleled quality and are subject to customisation as per the discretion of our clients.

We offer structural fabrication of;

1.Steel Silos: We engineer and fabricate custom steel silos to meet the needs of any application in the agricultural, food processing, chemical, and fertiliser industries. Cylindrical silos can be produced from carbon steel or stainless steel with apron, skirted, legged, or elevated support systems. Additional accessories such as ladders, catwalks, level indicators, round to square transitions, oversized flanges, explosion vents, and hatches can be integrated into any custom design.

Silos can be sized up to 94 high and 24 in diameter, and are designed to store dry media up to 250 tons. After fabrication, silos can be custom painted as well as lined with custom internal coatings specific to your application. The typical design and fabrication process includes 1 to 2 weeks for drafting, 2 weeks for engineering, and 8-10 weeks for fabrication and delivery. We have over 30 yearsexperience creating quality steel structures for customers.

2. Heavy Structural Fabrication & Erection: Catering to the demands of varied industry verticals, we offer our clients with Heavy Structural Fabrication & Erection setups. Our structural fabrication services and erection services are rendered by making use of mild steel & stainless steel and are available in cross section of special sections such as angles, channels and beams and joists. Reckoned for their qualities of rust resistance, longer service life and better rolling and cutting tolerance, our structural setups are available in various sizes and specifications.

3.Self-Supported Chimney: We design, fabricate and install self-supported chimneys for industry as well as hotels, hospitals and other buildings. Fabrication is carried out according to design provided by client orif required, designed by us. We offer the structural fabrication using High Quality and superior finish Arc/ SMAW/MIG Welding.

We manufacture Hot Water Calorifiers, extensively used in Hospitals, Hotels, Hostels and Community Centres etc. for washing, cleaning, bathing and kitchen services. Hot Water Calorifier supplieshot water in a large variation at immediate demand and desired rate.

oStorage type Calorifier

The Hot Water Calorifier is equippedwith a storage tank of required capacity, to heat stored water. The heating ofwater is precisely maintained by temperature control system. Depending on theavailability and utility, heating arrangement shall be either electrical, steamor hot oil system. These Hot Water Calorifiers are available in vertical orhorizontal shapes to suit the space requirements. Number of calorifiers can beinstalled in parallel, connected to a common header for larger installation andbroad demand range. Based on heating principle, we have two varieties ofCalorifiers, one is Convection only, and the other is Maximiser with forcedcirculation. We offer

Hot Water Calorifiers, which arepre-insulated or without Insulation (Insulation is done on site)

We offer a range of Hot Water Generators which can be either electrical or fuel fired. We have engineered our HWGs over a period of three decades and now offer the latest and the most efficient technology at extremely competitive prices.

We manufacture Electrical Hot Water Generators with capacity ranging from 50 Liters and above.

We also Supply HSD and Gas Fired Boilers for Hotels, Restaurants, Guest Houses etc. with capacity ranging from 13, 000 Kcal to 5, 00, 000 Kcal.

ReactionVessels for various industrial purposes, from medical industries to chemicals and food industries are also manufactured at our facility.These reaction vessels are provided with Limpet Coil or Jacket for Heating/ Cooling.

We fabricate storage tanks in Mild Steel (All Grades), Stainless Steel(304, 304 L, 316, 316 L, Duplex) and Carbon
Steel(All Grades)
The storage tanks can be Underground /Above Ground & Horizontal /Vertical. All our fabricated tanks conform to IS 10987:1992 fabricated with high quality standards and finish quality.

Avail from us a large assortment of superior qualityHydro Pneumatic Systemthat is highly appreciated in the national and international market. Our Hydro Pneumatic Booster System is perfect for increasing the pressure of the incoming water from the under ground and other sources. Our Hydro Pneumatic Pressure System offers complete solutions related to the water pressure problems. Hydro Pneumatic Booster System is extensively used in hotels, industries, homes and in various other places for the distribution of water.

Hydro booster sets consists of 2 to 4 identical grunfos CR Pumps mounted in parallel on a common base frame and a control cabinet with motor protection and integrated controller.Pumps are automatically operated according to system demand by means of pressure switches (one for each pump).

Pumpsare automatically operated according to system demand by means of pressureswitches (one for each pump).

Ahydro booster sets are supplied as complete, pre-assembled and tested systemincluding suction and discharge manifolds, isolating valves, pressure gauge andpressure switches.

Application

Water distribution forboiler, flush water and cooling water. Hotel, Industries, etc.

We offer System Design & Engineering of the Gas Banks according to usage and delivery parameters considering safety and good engineering practices to meet your energy needs. The system design and engineering is carried out in accordance with appropriate rules and standards. Our technical experts have more than 20 years of expertise and experience across continents in LPG system design.

We Manufacture, Supply and Install varied systems, like;

1.VOT(Vapor Off-Take) Manifold System: Manufacture, Supply and Installation of cylinder manifold which includes LPG adapters & pipes, pipe fittings, valves, thermal relief, slam shut off valve, strainers, non-return valves, pressure gauges, fire buckets, stand, fire extinguishers, instrumentation, electrical panel and pressure regulating station.

2.LOT(Liquid Off-Take) Manifold Systems: Manufacture, Supply and Installation of cylinder manifold which includes LPG adapters & pipes, pipe fittings, valves, thermal relief, slam shut off valve, strainers, non-return valves, pressure gauges, fire buckets, stand, fire extinguishers, vaporiser, instrumentation, electrical panel and high pressure regulating station.

3. LPG Distribution Network: We undertake LPG/PNG pipeline contracts on turnkey basis from the storage or safety area up to the combustion system installed on equipments. The scope of work includes the complete design, engineering, procurement, erection and testing of the LPG pipelines.

We also carry out installation of equipment other than the manifold system which is installed outside the shed and the yard. It includes pipes, pipe fittings& valves, secondary pressure regulating station, pressure gauges, hoses to burner, supports, filters, safety shut off devices and other desired fittings to give continuous LPG supply for the production.

We manufacture shell and tube type heat exchangers (IS 4503) and heat exchanging tanks for various purposes ranging from hot water applications, steam applications, heat recovery units and space heating units.These are manufactured according to IS4503 keeping in mind build quality and quick servicing options.

We manufacture pressure vessels for varied industrial application.

Mild steel silo carbon steel or stainless steel with apron, skirted, legged, or elevated support systems. Additional accessories such as ladders, catwalks, level indicators, round to square transitions, oversized flanges, explosion vents, and hatches can be integrated into any custom design.

Stainless steel silo custom steel silos to meet the needs of any application in the agricultural, food processing, chemical, and fertiliser industries. Cylindrical silos can be produced from carbon steel or stainless steel with apron, skirted, legged, or elevated support systems. Additional accessories such as ladders, catwalks, level indicators, round to square transitions, oversized flanges, explosion vents, and hatches can be integrated into any custom design.

We manufacture Air Receivers of different capacity and offer testing of the same with 100%Radiography, Hydro Test, SR etc., inspected and approved by third party agency.We are renowned in the industry as one of the premiere manufacturers of Air Receiver.

Hydropneumatic pressure system is perfect for increasing the pressure of the incoming water from the under ground and other sources. Our Hydro Pneumatic Pressure System offers complete solutions related to the water pressure problems. Hydro Pneumatic Booster System is extensively used in hotels, industries, homes and in various other places for the distribution of water.