Engineers Enterprises Batala, PB

We have made our name as a reputed Press Brake Machine Manufacturer and Supplier in Batala, Punjab. Press Brake Machine offered by us is appreciated for its heavy duty functioning. Manufactured using superior quality components and other raw materials, these Press Brake Machines have powerful performance. Our Press Brake Machines demand low maintenance. Sizes Available : 1mm x 1220mm to 8mm x 2500mm Parts and Functioning : Frame : Very rigid Frame is constructed from solid plates with interlocked design. The interlocked of Frame supports the Ram and Bed against any unexpected deflection under permissible loading condition Ram and Bed : Ram and Bed are made out of steel plates in suitable thickness. These are fully machined for straightness and parallelism and their upper surface is scraped properly with straight edge and its accuracy is checked with spirit level Drive System : The gears are pinion in the Drive System are accurately machines from alloy steel, mounted on the shaft. The gears system provides appropriate speed to balance the transmission of torque on the eccentrics Ram Adjustment Mechanism : Press brake is provided with motorized ram adjustment making it very easy to adjust the shut height to a desired value. It is linked to the overhead eccentrics by heavy connecting rods and screw spindles. Motor drives the adjustment screw through gearing in and out of connecting links, thus providing ram adjustment at convenient speed Clutch and Brake Assembly : Clutch and Brake Assembly are manufactured from high quality alloy steels and are designed to provide easy accessibility, simple adjustment to pick up load from standing start allowing frequent start and stop operation, the clutch assembly is duly hardened and tempered for frequent use. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released Lubrication System : Every moving part is provided lubrication through manual lubrication pump for smooth functioning Standard Equipment with Machine : Standard ‘v’ blocks punch, back gauge, motor pulley manual lubrication pump, two electrical motor i.e. one for ram adjustment and other for main drive, starters etc. Specifications Model Bending Distance Between Stroke Ram Shutheight Ram Strokes per Depth of Ram Adjustment Height of Bed Height of Side Bed Top Main Motor capacity capacity (in Tons) Housings of Ram Adjustment Stroke Down Minute Throat Motor H.P. Intermediate Tool Width bed Above Floor Housing Plate Ram Plate Rpm 1440 EGN-2-12-20 2X1250 20 800 50 40 200 40 200 0.5 110 125 700 25 40 40 3 H.P. ENG-3-12-30 3X1250 30 800 75 75 200 40 200 1 110 125 700 35 40 55 5H.P. ENG-4-12-40 4X1250 40 800 75 75 200 25 200 1 110 125 700 35 40 60 7.5H.P. ENG-6-12-60 6X1250 60 800 75 75 200 25 200 1 110 125 700 35 45 65 7.5H.P. ENG-8-12-80 8X1250 80 800 75 75 200 20 200 1 110 200 700 40 45 65 10H.P. ENG-2-15-25 2X1500 25 1220 50 40 200 40 200 1 110 125 700 25 40 40 3 H.P. ENG-3-15-40 3X1500 40 1220 75 50 200 40 200 1 110 125 700 35 40 55 5H.P. ENG-4-15-50 4X1500 50 1220 75 50 200 40 200 1 110 150 700 35 40 60 7.5H.P. ENG-6-15-75 6X1500 75 1220 75 50 200 35 200 1 110 170 700 35 40 65 7.5H.P. ENG-8-15-100 8X1500 100 1220 75 60 200 30 200 2 110 200 700 40 45 65 10H.P. ENG-2-18-30 2X1830 30 1500 50 40 200 40 200 1 110 125 700 25 40 45 3 H.P. ENG-3-18-45 3X1830 45 1500 60 50 200 40 200 1 110 125 700 35 45 60 5H.P. ENG-4-18-60 4X1830 60 1500 75 50 200 25 200 1 110 170 700 35 45 65 10H.P. ENG-6-18-90 6X1830 90 1500 75 50 200 25 200 1 110 170 700 35 45 70 15H.P. ENG-8-18-120 8X1830 120 1500 80 60 200 20 200 2 110 200 700 40 45 70 15H.P. ENG-2-`21-35 2X2135 35 1825 50 40 200 40 200 1 110 150 700 32 40 50 5H.P. ENG-3-21-50 3X2135 50 1825 60 50 200 40 200 1 110 150 700 35 45 60 10H.P. ENG-4-21-70 4X2135 70 1825 75 50 200 25 200 1 110 170 700 40 45 65 10H.P. ENG-6-21-45 6X2135 105 1825 75 50 250 25 200 2 110 170 700 40 45 70 20H.P. ENG-8-21-150 8X2135 150 1825 80 60 250 20 200 2 110 200 700 45 50 70 20H.P. ENG-2-25-40 2X2540 40 1950 50 40 200 40 200 1 110 150 700 32 40 50 5H.P. ENG-3-25-60 3X2540 60 1950 60 50 200 40 200 1 110 150 700 40 45 60 10H.P. ENG-4-25-80 4X2540 80 1950 75 50 200 25 200 1 110 170 700 40 45 65 15H.P. ENG-6-25-120 6X2540 120 1950 75 50 200 25 200 2 110 170 700 50 55 70 20H.P. ENG-8-25-160 8X2540 160 1950 80 60 200 20 200 2 110 200 700 55 55 75 20H.P. Note : All Dimensions are in Mm

We are one of the leading Lathe Machine Manufacturers and Suppliers in Batala, Punjab. These Lathe Machines are used for shaping metals for different applications. The range of Lathe Machine includes light duty lathe machine, medium duty lathe machine, high duty to heavy duty lathe machines etc. Sturdily constructed to perfection, our Lathe Machines are known for trouble free performance and resistance to corrosion. We use the best quality raw materials in fabricating these Lathe Machines which make them long lasting and more efficient. Our Lathe Machines are reasonably priced and have high demand in the market. Why Our Lathe Machine? Heavy duty Durable Low maintenance High efficiency Sizes Available : 6 feet to 20 feet all types

We bring forth Under Crank Shearing Machine which is highly demanded in the market for its better functionality and higher efficiency. These Under Crank Shearing Machines are manufactured with the use of best quality raw materials that impart strength and durability. These Under Crank Shearing Machines are easy to operate and are very economical as well. Parts and Functioning : Side Frame : The side Frames are steel fabricated. These are well reinforced to achieve minimum deflection and maximum rigidity by providing ribs where-ever required and keeping the proper metal thickness. Its interlock design gives support to the table Table : The strong bed box type of steel plate’s fabrication having suitable section forms a rigid back-bone for the plate shears and it gives proper support to the lower knife Beam : The upper beam is of steel well designed by keeping the required metal thickness and providing ribs required to eliminate deflection. The beam is designed in such a way that it maintains uniform knife clearance throughout the full length of knife. The upper beam travels in long broad faced flat guides which provide sufficient bearing area. This helps is maintaining uniform knife clearance during the reciprocating motion of the upper beam knife the beam is provided gun metal wedge bars on front and back side so that friction is minimized Hold Down : The hold down is spring loaded giving sufficient pressure on plate to be sheared which result in firm gripping and accurate shearing width of plate Slitting Unlimited Length : Gaps are provided in the side Frames due to which trimming of the sides of sheets longer then the shears length can easily be done. The upper beam stroke can easily be adjusted so that the knives do not cross completely at the high end and the plate is trimmed in successive cuts by progressively moving it through the throat Clutch Brake Drive : Revolving key clutch linked with the main gear engage every time when the foot pedal is pressed. Drive is through ‘v’ belts and gears. Moving shaft and big gear are mounted on gun metal bush bearings. Brakes are adjustable one incorporated on the end of crank shaft Blades : Blades material is high carbon and high chromium steel Standard Equipment : Back gauge manually operated , front gauge, front extension bracket, one set of blades fitted with machine, gears and ‘v’ belts pulley guard and manual lubrication pump Specifications Model Sear Length (inches / Mm) Shear Capacity ( in Inch & Mm) Size of Blade Blade Segments H.p. Requried Strokes Depth of Gap Maximum Back Height of Table Rpm 1440 Per Minute In Frame Adjustment From Floor ENG-UC-25A 25 / 610 1/16 1.6 660X65X13 1 2 40 65 600 800 ENG-UC-25B 25 / 610 1/8 3.2 660X65X13 1 3 40 65 600 800 ENG-UC-40A 40 /1016 1/8 3.2 104X65X13 1 3 40 75 600 800 ENG-UC-50A 50 / 1270 1/16 1.6 1320X65X13 1 3 40 75 600 800 ENG-UC-50B 50 / 1270 1/8 3.2 1320X65X13 1 5 40 75 600 800 ENG-UC-50C 50 / 1270 3/16 4 1320X75X16 1 5 40 75 600 800 ENG-UC-60A 60 / 1524 1/8 3.2 1575X75X16 1 5 35 75 600 800 ENG-UC-60B 60 /1524 3/16 4 1575X75X16 1 7.5 35 75 600 800 ENG-UC-72A 72 / 1830 1/8 3.2 1880X75X16 1 7.5 35 90 600 800 ENG-UC-72B 72 / 1830 3/16 4 1880X75X16 1 7.5 35 90 600 800 ENG-UC-80A 80/ 2030 1/8 3.2 2080X75X16 1 10 35 90 600 800 ENG-UC-80B 80 / 2030 3/16 4 2080X75X16 1 10 35 90 600 800 ENG-UC-100A 100 / 2540 1/8 3.2 2600X76X16 2 10 30 90 600 800 ENG-UC-100B 100 / 2540 3/16 4 2600X76X16 2 10 30 90 600 800 ENG-UC-120A 120 / 3050 1/8 3.2 3100X75X16 2 10 30 100 600 800 ENG-UC-120B 120 / 3050 3/16 4 3100X75X16 2 10 30 100 600 800

We present Over Crank Shearing Machine to our esteemed clients. Our Over Crank Shearing Machines are fabricated with the use of the best quality components that add up to their efficiency. These Over Crank Shearing Machines have user-friendly features that allow the user to operate in an efficient way. Our Over Crank Shearing Machines are properly inspected by the experts for higher efficiency. Parts and Functioning : Side Frames : The side Frame construction is box type and it is prepared by properly welding plates with high quality welding rods and it is ensured that no cracks are developed in the welding joints in order to get longer and flawless life of machine. The steel plates are welded from inside to avoid deflection and warping of side by providing sufficient supports from inside. Gaps are provided in Frames for trimming operation of uneven edges of sheets, proper machining is done to give correct alignment to other parts Intermediate Suppport : The intermediate support is box type and it is required for joining both the side Frames at the required distance and it is properly machined Drive : It is by an electric motor by means of ‘V’ belts. The first pinion gear shaft which carries heavy fly wheel and ‘V’ belt pulley revolves on taper rolling bearings. The intermediate shaft revolves on gun metal bushes. The main cam shaft revolves on long gun metal housings and this shaft carries the main gear which is fitted with clutch and it revolves on gun metal bushes Clutch : Clutch is manufactured from alloy steel, for quick action three keyways single key system is in corporate in the machine ensuring easy and efficient working of machine Brake : A constant spring loaded adjustable brake provided for the smooth working of the machine, at one end of the cam shaft Upper Ram : It is constructed from solid steel by giving ribs at back side and it is properly machined. It moves up and down in gun metal housings in order to reduce wear and tear. The top blade is kept at the required distance from the lower blade. The rake angle given to it is according to the thickness of material to be sheared Shear Bed : The construction of shear bed is box type and it is properly machined. The top of shear bed is provided with T-slot for fixing front gauge. It is also fitted with extension brackets for giving support to the sheet to be sheared. The lower blade of material high carbon and high chromium is fitted with it. The blade has four edges for shearing plate. It is perfectly designed to minimize the friction for forwarding the sheets and the safety of operators Hold Down System : Spring loaded hold down is provided to hold sheet securely to avoid slipping and bowling. The pressure of hold down can be increased / decreased by adjusting springs Knives : Each machine is provided with high quality high carbon and high chromium knives for enhanced tool life Mechanical Back Guage : The equipment is provided with scale to give instantaneous reading of distance between shears and back gauge to avoid errors Finnger Guard : To avoid accident finger guard is fitted in front of hold down system for operator’s protection without obstructing his view Standerd Accessories : One set of shear blade fitted with machine with four cutting edges of material H.C. & H.Cr, front extension brackets, back adjustable gauge, front gauge, gears guard, V belt pulley, motor plate , motor pulley and manual lubrication pump Specifications Model Sear Length (Inches / Mm) Shear (Capacity in Mm) Size of Blade Blade Segments H.p. Requried Strokes Depth of Gap Maximum Back Height of Table Rpm 1440 Per Minute In Frame Adjustment From Floor ENG-OC-50A 50/1270 6 1300X75X20 1 10 20 100 600 750 ENG-OC-50B 50/1270 8 1300X75X20 1 10 20 100 600 750 ENG-OC-50C 50/1270 10 1300X75X20 1 10 20 100 600 750 ENG-OC-60A 60/1524 6 1560X75X20 1 10 20 100 600 750 ENG-OC-60B 60/1524 8 1560X75X20 1 10 20 100 600 750 ENG-OC-60C 60/1524 10 1560X75X20 1 10 20 100 600 750 ENG-OC-72A 72/1830 6 1870X75X20 1 10 20 100 600 750 ENG-OC-72B 72/1830 8 1870X75X20 1 10 20 100 600 750 ENG-OC-72C 72/1830 10 1870X75X20 1 10 20 100 600 750 ENG-OC-80A 80/2030 6 2080X75X20 2 10 16 100 600 750 ENG-OC-80B 80/2030 8 2080X75X20 2 10 16 100 600 750 ENG-OC-80C 80/2030 10 2080X75X20 2 15 16 100 600 750 ENG-OC-100A 100/2540 6 2590X75X20 2 10 16 100 600 750 ENG-OC-100B 100/2540 8 2590X75X20 2 15 16 100 600 750 ENG-OC-100C 100/2540 10 2590X75X20 2 20 16 100 600 750 ENG-OC-120A 120/3050 6 3100X75X20 2 15 10 100 600 750 ENG-OC-120B 120/3050 8 3100X75X20 2 20 10 100 600 750 ENG-OC-120C 120/3050 10 3100X75X20 2 25 10 100 600 750

We present Over Crank Shearing Machine to our esteemed clients. Our Over Crank Shearing Machines are fabricated with the use of the best quality components that add up to their efficiency. These Over Crank Shearing Machines have user-friendly features that allow the user to operate in an efficient way. Our Over Crank Shearing Machines are properly inspected by the experts for higher efficiency. Parts and Functioning : Side Frames : The side Frame construction is box type and it is prepared by properly welding plates with high quality welding rods and it is ensured that no cracks are developed in the welding joints in order to get longer and flawless life of machine. The steel plates are welded from inside to avoid deflection and warping of side by providing sufficient supports from inside. Gaps are provided in Frames for trimming operation of uneven edges of sheets, proper machining is done to give correct alignment to other parts Intermediate Suppport : The intermediate support is box type and it is required for joining both the side Frames at the required distance and it is properly machined Drive : It is by an electric motor by means of ‘V’ belts. The first pinion gear shaft which carries heavy fly wheel and ‘V’ belt pulley revolves on taper rolling bearings. The intermediate shaft revolves on gun metal bushes. The main cam shaft revolves on long gun metal housings and this shaft carries the main gear which is fitted with clutch and it revolves on gun metal bushes Clutch : Clutch is manufactured from alloy steel, for quick action three keyways single key system is in corporate in the machine ensuring easy and efficient working of machine Brake : A constant spring loaded adjustable brake provided for the smooth working of the machine, at one end of the cam shaft Upper Ram : It is constructed from solid steel by giving ribs at back side and it is properly machined. It moves up and down in gun metal housings in order to reduce wear and tear. The top blade is kept at the required distance from the lower blade. The rake angle given to it is according to the thickness of material to be sheared Shear Bed : The construction of shear bed is box type and it is properly machined. The top of shear bed is provided with T-slot for fixing front gauge. It is also fitted with extension brackets for giving support to the sheet to be sheared. The lower blade of material high carbon and high chromium is fitted with it. The blade has four edges for shearing plate. It is perfectly designed to minimize the friction for forwarding the sheets and the safety of operators Hold Down System : Spring loaded hold down is provided to hold sheet securely to avoid slipping and bowling. The pressure of hold down can be increased / decreased by adjusting springs Knives : Each machine is provided with high quality high carbon and high chromium knives for enhanced tool life Mechanical Back Guage : The equipment is provided with scale to give instantaneous reading of distance between shears and back gauge to avoid errors Finnger Guard : To avoid accident finger guard is fitted in front of hold down system for operator’s protection without obstructing his view Standerd Accessories : One set of shear blade fitted with machine with four cutting edges of material H.C. & H.Cr, front extension brackets, back adjustable gauge, front gauge, gears guard, V belt pulley, motor plate , motor pulley and manual lubrication pump Specifications Model Sear Length (Inches / Mm) Shear (Capacity in Mm) Size of Blade Blade Segments H.p. Requried Strokes Depth of Gap Maximum Back Height of Table Rpm 1440 Per Minute In Frame Adjustment From Floor ENG-OC-50A 50/1270 6 1300X75X20 1 10 20 100 600 750 ENG-OC-50B 50/1270 8 1300X75X20 1 10 20 100 600 750 ENG-OC-50C 50/1270 10 1300X75X20 1 10 20 100 600 750 ENG-OC-60A 60/1524 6 1560X75X20 1 10 20 100 600 750 ENG-OC-60B 60/1524 8 1560X75X20 1 10 20 100 600 750 ENG-OC-60C 60/1524 10 1560X75X20 1 10 20 100 600 750 ENG-OC-72A 72/1830 6 1870X75X20 1 10 20 100 600 750 ENG-OC-72B 72/1830 8 1870X75X20 1 10 20 100 600 750 ENG-OC-72C 72/1830 10 1870X75X20 1 10 20 100 600 750 ENG-OC-80A 80/2030 6 2080X75X20 2 10 16 100 600 750 ENG-OC-80B 80/2030 8 2080X75X20 2 10 16 100 600 750 ENG-OC-80C 80/2030 10 2080X75X20 2 15 16 100 600 750 ENG-OC-100A 100/2540 6 2590X75X20 2 10 16 100 600 750 ENG-OC-100B 100/2540 8 2590X75X20 2 15 16 100 600 750 ENG-OC-100C 100/2540 10 2590X75X20 2 20 16 100 600 750 ENG-OC-120A 120/3050 6 3100X75X20 2 15 10 100 600 750 ENG-OC-120B 120/3050 8 3100X75X20 2 20 10 100 600 750 ENG-OC-120C 120/3050 10 3100X75X20 2 25 10 100 600 750

We present Over Crank Shearing Machine to our esteemed clients. Our Over Crank Shearing Machines are fabricated with the use of the best quality components that add up to their efficiency. These Over Crank Shearing Machines have user-friendly features that allow the user to operate in an efficient way. Our Over Crank Shearing Machines are properly inspected by the experts for higher efficiency. Parts and Functioning : Side Frames : The side Frame construction is box type and it is prepared by properly welding plates with high quality welding rods and it is ensured that no cracks are developed in the welding joints in order to get longer and flawless life of machine. The steel plates are welded from inside to avoid deflection and warping of side by providing sufficient supports from inside. Gaps are provided in Frames for trimming operation of uneven edges of sheets, proper machining is done to give correct alignment to other parts Intermediate Suppport : The intermediate support is box type and it is required for joining both the side Frames at the required distance and it is properly machined Drive : It is by an electric motor by means of ‘V’ belts. The first pinion gear shaft which carries heavy fly wheel and ‘V’ belt pulley revolves on taper rolling bearings. The intermediate shaft revolves on gun metal bushes. The main cam shaft revolves on long gun metal housings and this shaft carries the main gear which is fitted with clutch and it revolves on gun metal bushes Clutch : Clutch is manufactured from alloy steel, for quick action three keyways single key system is in corporate in the machine ensuring easy and efficient working of machine Brake : A constant spring loaded adjustable brake provided for the smooth working of the machine, at one end of the cam shaft Upper Ram : It is constructed from solid steel by giving ribs at back side and it is properly machined. It moves up and down in gun metal housings in order to reduce wear and tear. The top blade is kept at the required distance from the lower blade. The rake angle given to it is according to the thickness of material to be sheared Shear Bed : The construction of shear bed is box type and it is properly machined. The top of shear bed is provided with T-slot for fixing front gauge. It is also fitted with extension brackets for giving support to the sheet to be sheared. The lower blade of material high carbon and high chromium is fitted with it. The blade has four edges for shearing plate. It is perfectly designed to minimize the friction for forwarding the sheets and the safety of operators Hold Down System : Spring loaded hold down is provided to hold sheet securely to avoid slipping and bowling. The pressure of hold down can be increased / decreased by adjusting springs Knives : Each machine is provided with high quality high carbon and high chromium knives for enhanced tool life Mechanical Back Guage : The equipment is provided with scale to give instantaneous reading of distance between shears and back gauge to avoid errors Finnger Guard : To avoid accident finger guard is fitted in front of hold down system for operator’s protection without obstructing his view Standerd Accessories : One set of shear blade fitted with machine with four cutting edges of material H.C. & H.Cr, front extension brackets, back adjustable gauge, front gauge, gears guard, V belt pulley, motor plate , motor pulley and manual lubrication pump Specifications Model Sear Length (Inches / Mm) Shear (Capacity in Mm) Size of Blade Blade Segments H.p. Requried Strokes Depth of Gap Maximum Back Height of Table Rpm 1440 Per Minute In Frame Adjustment From Floor ENG-OC-50A 50/1270 6 1300X75X20 1 10 20 100 600 750 ENG-OC-50B 50/1270 8 1300X75X20 1 10 20 100 600 750 ENG-OC-50C 50/1270 10 1300X75X20 1 10 20 100 600 750 ENG-OC-60A 60/1524 6 1560X75X20 1 10 20 100 600 750 ENG-OC-60B 60/1524 8 1560X75X20 1 10 20 100 600 750 ENG-OC-60C 60/1524 10 1560X75X20 1 10 20 100 600 750 ENG-OC-72A 72/1830 6 1870X75X20 1 10 20 100 600 750 ENG-OC-72B 72/1830 8 1870X75X20 1 10 20 100 600 750 ENG-OC-72C 72/1830 10 1870X75X20 1 10 20 100 600 750 ENG-OC-80A 80/2030 6 2080X75X20 2 10 16 100 600 750 ENG-OC-80B 80/2030 8 2080X75X20 2 10 16 100 600 750 ENG-OC-80C 80/2030 10 2080X75X20 2 15 16 100 600 750 ENG-OC-100A 100/2540 6 2590X75X20 2 10 16 100 600 750 ENG-OC-100B 100/2540 8 2590X75X20 2 15 16 100 600 750 ENG-OC-100C 100/2540 10 2590X75X20 2 20 16 100 600 750 ENG-OC-120A 120/3050 6 3100X75X20 2 15 10 100 600 750 ENG-OC-120B 120/3050 8 3100X75X20 2 20 10 100 600 750 ENG-OC-120C 120/3050 10 3100X75X20 2 25 10 100 600 750