Other Products / Services #647019

Sprinkling system is used for dust suppression of stockpile. Water is sprayed on the stockpiles to keep the coal damped and prevent dust to flying around . Sprinklers Irrigation systems is used to control dust on outdoor stockpiles, but when the stockpiles are excavated, dust will arise as the drier material in the pile is exposed and moved around.   An sprinkler  system uses a lot more water than a fogging system – almost 10 times , sprinkling system is chosen after a lot of considerable planning and forethought.
One Sprinkler can move around its axis and can throw the water even up 20-40 m away.

Uses : Stockpiles and haulways.

We manufacture and supply bag filter on various application like induction furnace, banbury mixture, rolling mill furnace, coal handling plant, crusher and screen house, bunker house, sponge iron plants , rice mill, cement plants coal based thermal power plant etc . bag filter for low and high temperature dusty air are supplied. Heavy-duty dust collector for dust collection, pollution control & product recovery, built in single unit or in modular construction is costumed designed specially to suit the application. pulse jet bag filter dust laden air enters the dust collector through the hopper or high entry inlet housing section an internal baffle distributes the dirty air within, the housing , so as to reduce air velocity and allow heavier particles drop into hopper, while lighter particle collects on the outside surface of the bags for operation of bag filters, suction hoods shall be connected to suction take off points. These suction take off points shall be connected to the main ducting by branch ducting and the other end of main ducting shall culminate into bag filters. The outlet of bag filter to inlet duct of blower and the same will exhaust clean air to atmosphere vide a stack.

We are offering two stage cooling system. Two-stage evaporative coolers do not produce humidity levels as high as that produced by traditional single-stage evaporative coolers.

We supply complete conveying system for coal, cement, rice, baggage, lime stone, Crushing and screening systems etc. Idlers, Pulleys and other spares are supplied by us are also supplied by us.

Complete turnkey project of belt Conveyors :

• Raw Material Handling Systems
• Material Handling system
• Coal Conveying System
• Lime Stone Handling system,
• Complete crushing and screening system

Belt Conveyors accessories :

• Idlers
• Carrying Idlers
• Retsurn Idlers
• Belt Conveyors Pulleys

Air Handling Unit on offer finds its application in cooling and heating purpose of any space, workshop, offices etc. For dehumidification, cooling coil is employed to over-cool for reaching dew point resulting is condensation. Re-heat coil is placed after the cooling coil to re-heat the air to the desired temperature. It can be availed from us in bulk orders at an affordable price.

More About Air Handling Unit : AHU is used to provide heating, cooling, or both to change the supply air temperature, and humidity level depending on the application. It can be   provided by heat exchanger coil(s) within the air handling unit air stream; such coils may be direct or indirect in relation to the medium providing the heating or cooling effect Indirect coils use hot water or steam for heating, and chilled water for cooling (prime energy for heating and cooling is provided by central plant elsewhere in the building). Coils are typically manufactured from copper for the tubes, with copper or aluminium fins to aid heat transfer. Cooling coils will also employ eliminator plates to remove and drain condensate. The hot water or steam is provided by a central boiler, and the chilled water is provided by a central chiller. Downstream temperature sensors are typically used to monitor and control "off coil" temperatures, in conjunction with an appropriate motorized control valve prior to the coil.

We supply the roof mounted turbo ventilators. it runs without motors, this is the reason it is called natural extractors also, as it roates without any power and it has zero electricty consumption. No motor or panel is required for this. it is generaaly attached with frp based and is placed over the work shop roof. workshopd having higher temperature generates temerature or density ingradient with surrounding ambient temperature, which propells the ventilator to rotate and during this process it extracts air from inside the work shop and throw out to atmosphere. depending upon the room area, turbo ventilator numbers are calculated and mounted on the roof.

We supply pneumatic conveying system for all applications, We generally prefer to supply normally dense phase pneumatic conveying system for fly ash and various types of dust from esp, bag filters etc. We have very innovative design with very low pressure drop, comprising blow tanks, silos, etc
We have indigenously developed and designed the very efficient valves, like Dom valves, Isolation valves.  Specially design and developed Transporter  vessels assist in very low friction conveying of dusts.  Specially designed controlling mechanism are provided.

We can also supply lean phase system, depend on applications.

• Type  of   Pneumatic  - Conveying  System
• Dense Phase   Conveying  System
• Lean Phase   Conveying  System
• High pressure   Conveying  System

We can take  the system on turnkey basis, we can even supply collecting Silos, dust conditiong system or dust packaging system, bag filters along with the basic pneumating conveying system

Synopsis Pneumatic conveying systems are basically quite simple and are eminently suitable for    the transport of powdered and granular materials in factory, site and plant situations.  The system requirements are a source of compressed gas, usually air, a feed device,   a conveying pipeline and a receiver to disengage the conveyed material and carrier gas.  The system is totally enclosed, and if it is required, the system can operate entirely   without moving parts coming into contact with the conveyed material. High, low or  negative pressures can be used to convey materials. For hygroscopic materials dry air  can be used, and for potentially explosive materials an inert gas such as nitrogen can  be employed. A particular advantage is that materials can be fed into reception vessels  maintained at a high pressure if required
Pneumatic conveying systems are particularly versatile. A very wide range of materials  can be handled and they are totally enclosed by the system and pipeline.  a hopper or silo in one location to another location some distance away. Considerable   flexibility in both plant layout and operation are possible, such that multiple point feeding  can be made into a common line, and a single line can be discharged into a number  of receiving hoppers. With vacuum systems, materials can be picked up from open storage  or stockpiles, and they are ideal for clearing dust accumulations and spillages.  Pipelines can run horizontally, as well as vertically up and down, and with bends in  the pipeline any combination of orientations can be accommodated in a single pipeline  run. Conveying materials vertically up or vertically down presents no more of a problem  than conveying horizontally. Material flow rates can be controlled easily and monitored  to continuously check input and output, and most systems can be arranged for complete automatic operation.
 Pneumatic conveying systems are particularly versatile. A very wide range of materials  can be handled and they are totally enclosed by the system and pipeline.

Dense Phase Conveying SystemThe Dense Phase Conveying System is the most advanced,   efficient and most reliable system to convey material  with wide  range of capacities of dry bulk solids up to 200 TPH, with  terminal distances exceeding - 1, 200 meters. This system includes weighing, batching, blending, lump breaking, storage, master control equipments etc. through Dense Phase Conveying System for bulk material handling in the plant.
Dense Phase System is used to push and convey the highly dense concentration of bulk solids materials effectively at a low constant speed inside the conveying pipe lines. Any type of material (heavy, abrasive or, fragile, crystalline or granular ) can be conveyed without causing the degradation due to low velocity and less wear to the system components. Dense Phase System is reliable, flexible and maintenance free due to lower quantum of moving parts and it can also be easily installed  at location, where space availability constraint is there.
The low volume of air is utilized at the ash / transporting vessel to convey  the material into the line at maximum density while the balance air quantity is added along the conveying line through coupling unit provided at starting on the pipeline to overcome the pipeline frictional losses thus pumping material at the highest obtainable efficiency. The Coupling Unit ensures a uniform gradient and helps to maintain the material at maximum density. It also helps in maintaining the desired velocity, and over coming the pipeline / bend's friction and helps to restart the flow of blocked material if any along the conveying line regardless of length. These Coupling Unit also helps in minimizing the compressed air consumption and pipe abrasion.

Lean Phase systemLean Phase system works on low air pressure,   herein  material is conveyed in suspension in the flowing air.  To keep the material in suspension in the pipeline it is necessary to  maintain a minimum value of conveying line inlet air velocity that, for most materials, is  of the order of 13–15 m/s.

When it comes to Forced Draft Air Cooler, the name of Enviro International Corporation is highly revered as trustworthy Manufacturer, Exporter & Supplier. We manufacture optimum quality Forced Draft Air Cooler, which is basically a Gas to Air Heat Exchanger. The Forced Draft Air Cooler, we offer, is used to cool the exhaust gases from the Klin, Boilers etc. The hot gas passes through vertical tubes and ambient air is blown over the tube in number of modules for cooling the gas. There are two to four passes in the hot gas side depending upon the quantity of flue gas and its temperature. In conventional design where cold air is passed through horizontal tube bundle and hot flue gase. Is blown over the tubes there is a loss of heat transfer co-efficient. Unlike the gas- conditioning tower, dry type forced draught cooler does not require water and water disposal is not a problem. There are number of FD Fans for cooling. Hence there is more flexibility in regulating air flow to maintain accurate exit temperature. Cooling tube banks are of vertical design with no chance of dust accumulation. All three modes of heat transfer i.e. radiation, conduction and convection are used simultaneously to dissipitate heat thereby reducing less power consumption. Also there is no requirement of compressed air for system to clear any chokeage problem.

 

Industries Served

• Non Ferrous
• Power Plant
• Sponge Iron
• Cement
• Paper Mill
• Steel
• Ferro Allo

As an exceptional Manufacturer, Exporter & Supplier in the industry, we present a wide array of Air Slide in to our customers. The quality we offer is unrivaled. We take special care of quality by matching it against the highest norms of quality set by the industry. Owing to our first-rate distribution system, we also make available an option to deliver at your doorstep at your ease for nominal rates.

Enviro International Corporation in corporation  with enviro engineers and designers developed evolved technology for Fog Canon. Enviro  offers different types of Fog Canon. Enviro offer Fog cannon  that can operates on different principles.  First types  is  mechanically  system and will have  electrical motors too, Even in mechanical system,   we can offer different  types  of equipment having  different  principles for operation. In technology based on  mechanical system,   it can be prone to maintenance during it life time. Enviro also  offer other  technology, that can be trouble free system, with hardly any  occasional maintenance.

Fog canon is widely supplied  for   suppression of flying dust on various application, It is  very efficient system.  Unlike other types of dust suppression, it efficiency is very high. In some of  open space applications and  Fog canon can be successful only.Fog canon  mounted  on trolley can be  moved from one place to other place as fog canon  is on wheels.  Fog canon can be  used for  the flying dust suppression and can used  efficiently from a distance. It can   covers a  wide area. It throws the mist from a distance  Fog canon can be  used in  irrigation and industrial purpose. 

In industry, fog canon is most widely used application is Stock yard Area, Dirty mines,   Tripper/Truck unloading in mines and ground hopper, wagon trippers, Reclaimer hoppers, any locations where dust is flying and open too. In open area, only and only Fog canon is used widely, as other methods of catching dust  fails poorly on this fronts.

In industrial applications, where overuse of water can be issue, at such locations, Fog canon will be more useful and are more suitable for dust suppression than sprinklers in general.  Even during building breakings, ship breakings etc it can be  used.

We offer various type of Fog canon, It can be noted  every Fog canon is individually designed and manufactured as per client requirement and applications,   Fog canon can be fixed type and rotating type :In fixed type, Fog canon will suppress the dust in horozontally one direction only , while in Rotating type, fog canon  can be rotated and suppress the dust in any directions. Fog canon rotate around on its axis defferent angle depend on requirement, namely used for 0 deg, 180 deg or up to 330 Deg rotations .We supply Fog canon for a throw away range up to, 35m, 50m, 70m, and 100m, 150m.

Dry Fog  System We supply dry fog type dust suppression system for all the application. Dry Fog Dust control Systems have been in operation worldwide. It  make dual fluid (air and water) atomizing nozzles control virtually all breathable and fugitive dust.

 

Theory and Application :
The "Dry Fog" Dust Control System works on the principle of agglomeration. The Dust particles released from a Material Handling/Processing Plant which become air borne are made to pass through a blanket of extremely fine Fog. The dust particles and the Micronics size Fog droplets collide and adhere to each other, thus increasing their mass. After a series of such collisions, even the breathable and fugitive dust ranging from 1 to 800 microns mass agglomerates to become heavier enough to settle. The lower capital, operating and maintenance cost compared to De-dusting Bag House System made it popular in the industries. Easy installation in existing plants. In most cases, the system can be installed while the plant operates at full capacity. No major plant modifications are required for installation of the system. Water addition to the process is as low as 0.1% of the weight of the material being handled. No requirement of Chemical.
Dry for type dust suppression sysytem is widely used at ground hopper, trasfer towers, coalhandling plants etc.

Operation of DS SystemAuto control or manual control governs the system. It has to be insured that main tank is filled with water. The water is pumped by feed water pump from main tank to feed water tank.   the system in recalculation.  The sensing system for controlling spray at proper header ensures spraying solution if conveyor is running with coal. And will not allow spraying solution if conveyors are running empty, the solenoid valve headers are energized if conveyor is running with coal. If all or some of the solenoid valves are not energized the system will realize pressure through pressure relief valve, which protects the system. A solenoid valve is provided with bypass line, which operates when none of the spray header solenoid valves are operative.

We are offering  pressure vessels, any types of tanks, storage bins, Silos in carbon steel, stainless steel  construction. Our expertise includes the fabrication of high-pressure, low-pressure, cooling, heating or secondary containment vessels. Equipment  will be offered  as per ASME ISO and standards.

Enviro International Corporation in corporation with enviro engineers and designers developed evolved technology for Fog Canon. Enviro offers different types of Fog Canon. Enviro offer Fog cannon that can operates on different principles. First types is mechanically system and will have electrical motors too, Even in mechanical system, we can offer different types of equipment having different principles for operation. In technology based on mechanical system, it can be prone to maintenance during it life time. Enviro also offer other technology, that can be trouble free system, with hardly any occasional maintenance.

Fog canon is widely supplied for suppression of flying dust on various application, It is very efficient system. Unlike other types of dust suppression, it efficiency is very high. In some of open space applications and Fog canon can be successful only.

Fog canon mounted on trolley can be moved from one place to other place as fog canon is on wheels. Fog canon can be used for the flying dust suppression and can used efficiently from a distance. It can covers a wide area. It throws the mist from a distance Fog canon can be used in irrigation and industrial purpose. In industry, fog canon is most widely used application is Stock yard Area, Dirty mines, Tripper/Truck unloading in mines and ground hopper, wagon trippers, Reclaimer hoppers, any locations where dust is flying and open too. In open area, only and only Fog canon is used widely, as other methods of catching dust fails poorly on this fronts.

In industrial applications, where overuse of water can be issue, at such locations, Fog canon will be more useful and are more suitable for dust suppression than sprinklers in general. Even during building breakings, ship breakings etc it can be used.

We offer various type of Fog canon, It can be noted every Fog canon is individually designed and manufactured as per client requirement and applications, Fog canon can be fixed type and rotating type :In fixed type, Fog canon will suppress the dust in horozontally one direction only , while in Rotating type, fog canon can be rotated and suppress the dust in any directions. Fog canon rotate around on its axis defferent angle depend on requirement, namely used for 0 deg, 180 deg or up to 330 Deg rotations .We supply Fog canon for a throw away range up to, 35m, 50m, 70m, and 100m, 150m.

Fit for application in fly ash, rice, cement etc., Bucket Elevator Conveyor can be specifically design for meeting customers’ specific needs. It is used for handling various bulk materials. It comprises of a belt or chain driven around head and tail pulleys carrying buckets which contains the material. It is carried out within a fully sealed casing to provide efficient dust containment for materials posing dust emission problems.

We supply Screw Conveyor for all aplication. We can supply screw conveyor in MS/ SS for aplication like fly ash, rice, cement or fior any other application. We specifically design the system to suit the requirement.
Screw  conveyors has become popular equipment, which is used to move materials in direction, horizontally, at an inclination  or vertically.
With proper covers and gasketing they become weatherproof, dust tight and rodent proof. Their compact design allows them to fit easily into restricted areas that would otherwise be unsuitable for most types of bulk material handling equipment. They are simple to install and support and require very little maintenance.

Offered by us in several specifications, our products are in complete compliance with the quality standards. The offered lot is reckoned for its quality and reliability as it is prepared using the best available resources. Also, we make sure that the material is sourced from the certified places.

We are counted amidst the reliable Fume Extraction System Manufacturers, Exporters and Suppliers for providing a varied range. Manufactured as per the industrial standards and the specifications given by clients, our Fume Extraction Systems have highly advanced mechanism to drive away poisonous gases and fumes from the workplace. Capacity :

• From 1500 m3/hr to 2, 20, 000 m3/hr

Salient Features :

• Designed as per the site space of the client
• Consistent performance
• Works effectively for long time
• Easy to maintain

Suitable For :

• Induction furnaces
• Acid fume exhausts
• Ceramic industry
• Pickling plants

We provide high-end Dust Suppression System that is highly beneficial in material handling plants. Our Dust Suppression Systems are designed by experienced engineers and act as the perfect alternative to bag houses due to their performance and economy. Dry Fog Dust Suppression System can be made available in customized versions as well and we act as an OEM and erector of this dust abatement system. Why Our Dust Suppression System?

• Supported with turnkey and maintenance services
• Can be easily installed even in existing plants
• Compact structure of “DRY FOG” system
• No requirements for any modification while installing
• Lower expenses for operation and maintenance
• No issue of secondary dust disposal
• Low water addition of only 0.1% of the material weight

Application Areas :

• Coal Handling Plants
• Wooden mills
• Cement Plants
• Workshop Ventilation
• Product and Stock Houses
• Bunker Houses Fume Exhausts

We  manufacture and supply Bag Filter on various application like Induction furnace,   banbury mixture, rolling mill Furnace, coal handling plant, Crusher and screen house, bunker house, sponge iron plants , Rice mill, cement plants coal based thermal power plant etc. Bag Filter for low and High temperature dusty air are supplied. Heavy-duty dust collector for dust collection, pollution control & product recovery, built in single unit or in modular construction is costumed designed specially to suit  the application. Specially design bag filter has been developed for facilitating easy forwarding of the material, we can supply Bag- Filter in Panel Forms. During production of the bag filter, welding will not be required. Bag-filter and Hopper will be made by CNC machines and parts of Bag-filter will be assembled by nuts and bolts only. Panel form type bag filter can be  delivered in 2 weeks times and the same can be assembled at site in few hours only. It also helps in easy maintenance of the equipment. This technology has migrated from Europe's and we are one of the first user of this technology in India. This Bag-Filter system can be assembled and dismantled  with-in 60-90 minutes only. Features :

• Facilitates easy material forwarding
• Easy to assemble and dismantle within 60-90 minutes
• Robust construction
• Corrosion resistant
• Reasonable pricing

Application Areas :

• Induction furnace
• Banbury mixture
• Rolling mill furnace
• Coal handling plant
• Crusher and screen house
• Bunker house
• Sponge iron plants
• Rice mill
• Cement plants
• Coal based thermal power plant

We supply pneumatic conveying system for all applications, we generally prefer to supply normally dense phase pneumatic conveying system for fly ash and various types of dust from esp, bag filters etc. We have very innovative design with very low pressure drop, comprising blow tanks, silos, etc we have indigenously developed and designed the very efficient valves, like dom valves, isolation valves. specially design and developed transporter vessels assist in very low friction conveying of dusts. specially designed controlling mechanism are provided. We can also supply lean phase system , depend on applications. Type of pneumatic conveying system dense phase conveying system lean phase conveying system high pressure conveying system we can take the system on turnkey basis, we can even supply collecting silos, dust conditiong system or dust packaging system, bag filters along with the basic pneumating conveying system

We bring forth a wide range of wet scrubbers that is designed keeping the demanding industrial applications in mind. Our technically advanced wet scrubber range is highly appreciated for its efficiency and repeatedly demanded for its quality by clients. capacity :from 1500 m3hr to 2, 20, 000 m3hr appreciated for :innovative designenhancing system efficiencyavailability of equipment as per requirementconsistent outputgiving protection from various hazardous materials supplied for :induction furnacespickling plantsacid fume exhaustsceramic industry types of scrubber packed bed scrubber ventury scrubber

We design manufacture pressure vessel for storing any type of liquid, gases, at low or high pressure. we design the system, as per customary requirement of client, or we manufacture, the system as per client drawings. With vast experience of offering high technology based custom design product range with installation in so many installation in india and abroad has entered new product range of industry, with a sound fabrication oriented product we are offering pressure vessels, any types of tanks, storage bins, silos in carbon steel, stainless steel construction. Our expertise includes the fabrication of high-pressure, low-pressure, cooling, heating or secondary containment vessels. Equipment will be offered as per asme iso and standardsrefineries * chemical industry* off shore activities* petrochemical industry* pharmaceutical industry* food processing industry* process engineering industrycement industries

Enviro International Corporation is one of the specialized Manufacturers, Exporters & Suppliers of Air Washer. We specialize in manufacturing two-stage Air Washers, which do not produce humidity levels as high as that produced by traditional single-stage evaporative coolers. We use advanced technology and improvised materials to manufacture these Air Washers. Our Air Washer is optimized to deliver flawless performance. We are committed to provide Air Washer at very reasonable price.
An advanced two-stage evaporative cooler uses 100 percent outdoor air and a variable speed blower to circulate cool air. Two-stage evaporative coolers can reduce energy consumption by 60 to 75 percent over conventional air conditioning system.
A 2-stage Air Washer (aka "indirect/direct" cooling) represents the most advanced cooling system utilizing evaporative cooling technology. This cooling option is much more energy efficient than cooling with refrigerant (standard air conditioning), but it's not suitable for all cooling applications.
Let's explain 2-stage evaporative cooling in terms of the stages of cooling that occur. In the first stage, hot outside air passes inside a heat exchanger that is cooled by evaporation on the outside. During this initial cooling phase, the incoming air stream doesn't pick up any extra moisture. In the second stage, the same air stream passes through a water-soaked pad where the additional cooling takes place and the air picks up some additional humidity.
A two-stage Air Washer can deliver cool indoor air with a relative humidity in the 50%-65% range, while direct Air Washers typically condition the air at around 70% relative humidity.

Direct Evaporative CoolingA direct Air Washer is the simplest type of cooling system available. You can duplicate the function of a direct Air Washer by wrapping a wet handkerchief around your neck on a hot day, and standing in front of a fan. It takes heat energy to turn water (or any liquid) from a liquid into a vapor. As the water in the wet handkerchief evaporates, your body gives up heat and you feel cooler.
A direct Air Washer has just a few basic parts, as shown in the drawing. A large fan pulls hot air through a dampened sponge-like pad, and distributes the resulting cooler air to the interior space through a ductwork system.
A direct Air Washer works best in a hot, dry climate where it's desirable to add humidity to air while cooling it. In hot, dry areas throughout the Southwest, this type of cooling system is a popular alternative to refrigeration-based air conditioning. Air Washers consume less energy than refrigerant-based systems because a fan can operate on less power than a compressor.
If you live in the Southeast, where summer weather is hot and humid, a direct Air Washer is not a wise choice. Instead, consider an indirect Air Washer, a two-stage Air Washer, or a conventional refrigerant-based AC system.

Indirect Evaporative CoolingIndirect evaporative cooling works on the same principle as direct evaporative cooling lowering air temperature by causing water to evaporate. The main difference with an indirect system is that a heat exchanger is used to cool the air supplied to the living space. The evaporative cooling cycle occurs in the heat exchanger.

Here's a sequential explanation of what happens in an indirect Air Washer:

• Hot outside air is blown through a heat exchanger that is supplied with water. One design for this type of heat exchanger features a series of metal tubes that are kept wet on their outside surfaces. As hot air passes over these tubes, the water evaporates and the tubes are cooled. After passing over the tubes, the cool, moist air is exhausted to the outside.
• As cooling happens on the heat exchanger's exterior surfaces, hot exterior air is drawn through the tube interiors. This air is cooled, but without gaining any extra humidity, before it is blown through ductwork to the building interior.

Indirect evaporative cooling provides cool air to interior spaces without as much humidity as direct evaporative cooling. This, cooling method is more suitable for areas where additional humidity isn't desirable for interior air. Because indirect evaporative cooling requires two fans rather than one, it consumes more electricity than direct evaporative cooling.