SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower thermal conductivity Large view glasses are possible to fix with the Insulated panel doors without any extra support Lower thermal conductivity Good adaptability & dimensional stability UV resistant Aesthetically appealing Flexibility in design Light in Weight and hence easy to handle and install and Ease of Maintenance with Zero Downtime Economical & cost effective Available in any color TECHNICAL SPECIFICATION Our FRP Roof Sheet having a wide range of applications and sizes. TYPE Flat Sheet Trapezoidal Sheet Corrugated sheet SIZE 1 m X 1 m to 1 m X 3.65 m (Thickness as per customer requirement) MATERIAL OF CONSTRUCTION FRP Moulded using Polyester Grade Resin with Fiberglass QUALITY SPECIFICATIONS Qualification as per Customer specifications

SALIENT FEATURES Good Chemical, Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Higher conveying ability due to glossy internal finish & hence less pump loads. Abrasion resistance Lower thermal conductivity Resistant to galvanic & stray electrical currents Excellent thermal insulation Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Non-reactive Ease of fabrication such as cutting, drilling, joining etc. Good Insulating Qualities Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our GRP Petroleum Storage Tanks having a wide range of applications and sizes. DESIGN STANDARDS Major Design Standards: BS 4994, ASME RTP-1, ASME Section X SIZE As per Customer Requirements MATERIAL OF CONSTRUCTION FRP Moulded and Filament Wound using Isopthalic, Bisphenol, Vinylester and Epoxy Resin PP/FRP, PPH/FRP, PVC/FRP, CPVC/FRP, PVDF/FRP, ECTFE/FRP, FEP/FRP QUALITY SPECIFICATIONS Qualification as per BS 4994, ASME Section X

SALIENT FEATURES Factory Made: Bulk Production Value Custom Built & Pre-engineered construction with PUF Insulated Panels/EPS Insulated panels Options available with various finishes like PPGS / PPGS, PPGS / GI with paint on one side, GI / GI with both side paint Walls of different height, yet sturdy and strong construction Light weight panels which is easy to lift and erect at any height on the roof too for extension purpose Large view glasses are possible to fix with the Insulated panel doors without any extra support Fixing of fresh air/ exhaust air fan, smoke detectors, fire fighting equipments, ACs are easily possible for safety and better facilities. Available in Dismantled Condition: Quick Installation Flexibility of expansion and re-location Convenient Assembling and Dissembling Puff insulation from all weather UV Protection against sunlight Customized Size and Structural Designs Light Weight: Ease of Transportation Decreased Life cycle Cost in comparison to other materials High Aesthetic Value TECHNICAL SPECIFICATION DESIGN STANDARDS Major Design Standards: IS 875(Wind), IS 1893(Earthquake) using NX and STADPRO SIZE As per Customer Requirements MATERIAL OF CONSTRUCTION FRP Sandwich Panel with FRP FRP Sandwich Panel with PPGI PPGI Sandwich Panel with PPGI FRP Pultruded Sandwich Panel QUALITY SPECIFICATIONS Raw material identification as per IS 6746 , IS 11551 Physical shot calculations of puff injection between FRP skin

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower thermal conductivity Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Sturdy and Structurally Stable Thermally insulated & Non Slip Economical & cost effective TECHNICAL SPECIFICATION Our FRP Ladders having a wide range of applications and sizes like Step Ladder, Platform Step Ladder, Shelf Lader, Manhole Ladder, Extension Ladder, Mobile Platform Ladder, etc. as per customer requirements. DESIGN STANDARDS ASTM D 3917-96 ANSI-ASC-A14.5 OSHA SIZE As per Customer Requirements MATERIAL OF CONSTRUCTION FRP Pultruded Sections with Polyester Grade Resin composition with Fiberglass Aluminum Section for Steps QUALITY SPECIFICATIONS As per ASTM D 3917-96 OSHA

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Higher conveying ability due to glossy internal finish & hence less pump loads. Abrasion resistance Lower thermal conductivity Resistant to galvanic & stray electrical currents Excellent thermal insulation Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Good Insulating Qualities Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our FRP Chemical Reactors & Reaction Vessels having a wide range of applications and sizes. DESIGN STANDARDS BS 4994 ASME RTP-1 SIZE As per Customer Requirements MATERIAL OF CONSTRUCTION FRP Moulded and Filament Wound using Isopthalic, Bisphenol, Vinylester and Epoxy Resin PP & HDPE Spiral Wound PP/FRP, PPH/FRP, PVC/FRP, CPVC/FRP, PVDF/FRP, ECTFE/FRP, FEP/FRP QUALITY SPECIFICATIONS Qualification as per BS 4994

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower thermal conductivity Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our FRP Fan Stack having a wide range of applications and sizes. DESIGN Type : As per customer specifications Size : As per customer requirements MATERIAL OF CONSTRUCTION FRP Moulded using Polyester Grade Resin with Fiberglass QUALITY SPECIFICATIONS Qualification as per Customer specifications

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower electrical & thermal conductivity Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Sturdy and Structurally Stable Non Skid Surface Economical & cost effective TECHNICAL SPECIFICATION Our FRP Pultruded Grating supplied in it's length, width & height as per customer requirements. DESIGN STANDARDS As per customer specifications ASTM D 3917 - 96 SIZE Standard: Width - 1200mm , Length - 2400mm Standard Thickness: 25mm , 38mm & 50mm MATERIAL OF CONSTRUCTION FRP Pultruded Sections with Polyester Grade Resin composition with Fiberglass QUALITY SPECIFICATIONS As per ASTM D 3917-96 OSHA

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower thermal conductivity and Good adaptability & dimensional stability with UV resistance and Flexibility in design Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our FRP Gutter having a wide range of applications and sizes. DESIGN As per customer specifications SIZE As per customer requirements MATERIAL OF CONSTRUCTION FRP Moulded using Polyester Grade Resin with Fiberglass QUALITY SPECIFICATIONS Qualification as per Customer specifications

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower thermal conductivity and Good adaptability & dimensional stability with UV resistance and Flexibility in design Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our FRP Gutter having a wide range of applications and sizes. DESIGN As per customer specifications SIZE As per customer requirements MATERIAL OF CONSTRUCTION FRP Moulded using Polyester Grade Resin with Fiberglass QUALITY SPECIFICATIONS Qualification as per Customer specifications

SALIENT FEATURES Factory Made: Bulk Production Value Custom Built & Pre-engineered construction with PUF Insulated Panels/EPS Insulated panels Options available with various finishes like PPGS / PPGS, PPGS / GI with paint on one side, GI / GI with both side paint Walls of different height, yet sturdy and strong construction Light weight panels which is easy to lift and erect at any height on the roof too for extension purpose Large view glasses are possible to fix with the Insulated panel doors without any extra support Fixing of fresh air/ exhaust air fan, smoke detectors, fire fighting equipments, ACs are easily possible for safety and better facilities. Available in Dismantled Condition: Quick Installation Flexibility of expansion and re-location Convenient Assembling and Dissembling Puff insulation from all weather UV Protection against sunlight Customized Size and Structural Designs Light Weight: Ease of Transportation Decreased Life cycle Cost in comparison to other materials High Aesthetic Value TECHNICAL SPECIFICATION DESIGN STANDARDS Major Design Standards: IS 875(Wind), IS 1893(Earthquake) using NX and STADPRO SIZE As per Customer Requirements MATERIAL OF CONSTRUCTION FRP Sandwich Panel with FRP FRP Sandwich Panel with PPGI PPGI Sandwich Panel with PPGI FRP Pultruded Sandwich Panel QUALITY SPECIFICATIONS Raw material identification as per IS 6746 , IS 11551 Physical shot calculations of puff injection between FRP skin

SALIENT FEATURES Factory Made: Bulk Production Value Custom Built & Pre-engineered construction with PUF Insulated Panels/EPS Insulated panels Options available with various finishes like PPGS / PPGS, PPGS / GI with paint on one side, GI / GI with both side paint Walls of different height, yet sturdy and strong construction Light weight panels which is easy to lift and erect at any height on the roof too for extension purpose Large view glasses are possible to fix with the Insulated panel doors without any extra support Fixing of fresh air/ exhaust air fan, smoke detectors, fire fighting equipments, ACs are easily possible for safety and better facilities. Available in Dismantled Condition: Quick Installation Flexibility of expansion and re-location Convenient Assembling and Dissembling Puff insulation from all weather UV Protection against sunlight Customized Size and Structural Designs Light Weight: Ease of Transportation Decreased Life cycle Cost in comparison to other materials High Aesthetic Value TECHNICAL SPECIFICATION DESIGN STANDARDS Major Design Standards: IS 875(Wind), IS 1893(Earthquake) using NX and STADPRO SIZE As per Customer Requirements MATERIAL OF CONSTRUCTION FRP Sandwich Panel with FRP FRP Sandwich Panel with PPGI PPGI Sandwich Panel with PPGI FRP Pultruded Sandwich Panel QUALITY SPECIFICATIONS Raw material identification as per IS 6746 , IS 11551 Physical shot calculations of puff injection between FRP skin

SALIENT FEATURES Good Chemical, Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Higher conveying ability due to glossy internal finish & hence less pump loads. Abrasion resistance Lower thermal conductivity Resistant to galvanic & stray electrical currents UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Longer life performance Economical & cost effective TECHNICAL SPECIFICATION Our FRP Air Pollution Control System having a wide range of applications and sizes. DESIGN STANDARDS Major Design Standards: ASCE/SEI 52-10, BS 6464, ASME RTP-1, IS 875 (Wind) & IS 1893 (Earthquake) using NX and STAADPRO, Software : Fantech 2.0 Standard Process design as per customer requirements SIZE As per Customer Requirements MATERIAL OF CONSTRUCTION FRP Moulded and Filament Wound using Isopthalic, Bisphenol, Vinylester and Epoxy Resin PP & HDPE Spiral Wound PP/FRP, PPH/FRP, PVC/FRP, CPVC/FRP, PVDF/FRP, ECTFE/FRP, FEP/FRP QUALITY SPECIFICATIONS Qualification as per BS 4994 Performance test by using Anemometer and Tachometer

SALIENT FEATURES Factory Made: Bulk Production Value Custom Built & Pre-engineered construction with PUF Insulated Panels/EPS Insulated panels Options available with various finishes like PPGS / PPGS, PPGS / GI with paint on one side, GI / GI with both side paint Walls of different height, yet sturdy and strong construction Light weight panels which is easy to lift and erect at any height on the roof too for extension purpose Large view glasses are possible to fix with the Insulated panel doors without any extra support Fixing of fresh air/ exhaust air fan, smoke detectors, fire fighting equipments, ACs are easily possible for safety and better facilities. False Floor suits the requirement of Cable passing through cable trench Available in Dismantled Condition: Quick Installation Flexibility of expansion and re-location Convenient Assembling and Dissembling Puff insulation from all weather UV Protection against sunlight Customized Size and Structural Designs Light Weight: Ease of Transportation Decreased Life cycle Cost in comparison to other materials High Aesthetic Value TECHNICAL SPECIFICATION DESIGN STANDARDS Major Design Standards: IS 875(Wind), IS 1893(Earthquake) using NX and STADPRO SIZE As per Customer Requirements MATERIAL OF CONSTRUCTION FRP Sandwich Panel with FRP FRP Sandwich Panel with PPGI PPGI Sandwich Panel with PPGI FRP Pultruded Sandwich Panel QUALITY SPECIFICATIONS Raw material identification as per IS 6746 , IS 11551 Physical shot calculations of puff injection between FRP skin

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Non Conductive & Non Magnetic Highly Durable Lower thermal conductivity Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Sturdy and Structurally Stable Economical & cost effective TECHNICAL SPECIFICATION Our FRP Deck Panels are manufactured by pultrusion process. DESIGN Type : ASTM D 3917-96 Size : 300 mm wide MATERIAL OF CONSTRUCTION FRP Pultruded Section with Polyester Grade Resin composition with Fiberglass QUALITY SPECIFICATIONS As per ASTM D 3917-96

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower thermal conductivity Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Economical & cost effective Available in any color TECHNICAL SPECIFICATION Our FRP Roof Sheet having a wide range of applications and sizes. DESIGN Type : 1. Flat Sheet 2. Trapezoidal Sheet 3. Corrugated sheet Size : 1 m X 1 m to 1 m X 3.65 m (Thickness as per customer requirement) MATERIAL OF CONSTRUCTION FRP Moulded using Polyester Grade Resin with Fiberglass QUALITY SPECIFICATIONS Qualification as per Customer specifications

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower thermal conductivity and Good adaptability & dimensional stability with UV resistance and Flexibility in design Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our FRP Gutter having a wide range of applications and sizes. DESIGN As per customer specifications SIZE As per customer requirements MATERIAL OF CONSTRUCTION FRP Moulded using Polyester Grade Resin with Fiberglass QUALITY SPECIFICATIONS

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower thermal conductivity and Good adaptability & dimensional stability with UV resistance and Flexibility in design Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our FRP Gutter having a wide range of applications and sizes. DESIGN As per customer specifications SIZE As per customer requirements MATERIAL OF CONSTRUCTION FRP Moulded using Polyester Grade Resin with Fiberglass QUALITY SPECIFICATIONS Qualification as per Customer specifications

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Higher conveying ability due to glossy internal finish & hence less pump loads Abrasion resistance & Lower thermal conductivity Resistant to galvanic & stray electrical currents and Excellent thermal insulation Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Ease of fabrication such as cutting, drilling, joining etc Good Insulating Qualities Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our FRP tanks & Vessels having a wide range of applications and sizes. DESIGN STANDARDS Major Design Standards: BS 4994, ASME RTP-1, ASME Section X SIZE 100 Liters to 300 KL MATERIAL OF CONSTRUCTION FRP Moulded and Filament Wound using Isopthalic, Bisphenol, Vinylester and Epoxy Resin PP & HDPE Spiral Wound PP/FRP, PPH/FRP, PVC/FRP, CPVC/FRP, PVDF/FRP, ECTFE/FRP, FEP/FRP QUALITY SPECIFICATIONS Qualification as per BS 4994, ASME Section X

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower thermal conductivity and Good adaptability & dimensional stability with UV resistance and Flexibility in design Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our FRP Gutter having a wide range of applications and sizes. DESIGN As per customer specifications SIZE As per customer requirements MATERIAL OF CONSTRUCTION FRP Moulded using Polyester Grade Resin with Fiberglass QUALITY SPECIFICATIONS Qualification as per Customer specifications

SALIENT FEATURES Good Chemical, Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Higher conveying ability due to glossy internal finish & hence less pump loads. Abrasion resistance Lower thermal conductivity Resistant to galvanic & stray electrical currents Excellent thermal insulation Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Good Insulating Qualities Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our FRP Scrubbers having a wide range of applications and sizes. DESIGN STANDARDS Major Design Standards: BS 4994, ASME RTP-1 As per standard process design SIZE As per customer requirements MATERIAL OF CONSTRUCTION FRP Moulded and Filament Wound using Isopthalic, Bisphenol, Vinylester and Epoxy Resin PP & HDPE Spiral Wound PP/FRP, PPH/FRP, PVC/FRP, CPVC/FRP, PVDF/FRP, ECTFE/FRP, FEP/FRP QUALITY SPECIFICATIONS Qualification as per BS 4994

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower electrical & thermal conductivity Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Sturdy and Structurally Stable Economical & cost effective TECHNICAL SPECIFICATION Our FRP Pultruded Walkways, Staircase & Railing having a wide range of applications and sizes. DESIGN STANDARDS As per customer specifications ASTM D 3917 - 96 OSHA SIZE As per customer requirements MATERIAL OF CONSTRUCTION FRP Pultruded Sections with Polyester Grade Resin composition with Fiberglass QUALITY SPECIFICATIONS As per ASTM D 3917-96 OSHA QUALITY SPECIFICATIONS As per ASTM D 3917-96 OSHA QUALITY SPECIFICATIONS As per ASTM D 3917-96 OSHA QUALITY SPECIFICATIONS As per ASTM D 3917-96 OSHA QUALITY SPECIFICATIONS As per ASTM D 3917-96 OSHA

SALIENT FEATURES Factory Made: Bulk Production Value Custom Built & Pre-engineered construction with PUF Insulated Panels/EPS Insulated panels Options available with various finishes like PPGS / PPGS, PPGS / GI with paint on one side, GI / GI with both side paint Walls of different height, yet sturdy and strong construction Light weight panels which is easy to lift and erect at any height on the roof too for extension purpose Large view glasses are possible to fix with the Insulated panel doors without any extra support Fixing of fresh air/ exhaust air fan, smoke detectors, fire fighting equipments, ACs are easily possible for safety and better facilities. Available in Dismantled Condition: Quick Installation Flexibility of expansion and re-location Convenient Assembling and Dissembling Puff insulation from all weather UV Protection against sunlight Customized Size and Structural Designs Light Weight: Ease of Transportation Decreased Life cycle Cost in comparison to other materials High Aesthetic Value TECHNICAL SPECIFICATION DESIGN STANDARDS Major Design Standards: IS 875(Wind), IS 1893(Earthquake) using NX and STADPRO SIZE As per Customer Requirements MATERIAL OF CONSTRUCTION FRP Sandwich Panel with FRP FRP Sandwich Panel with PPGI PPGI Sandwich Panel with PPGI FRP Pultruded Sandwich Panel QUALITY SPECIFICATIONS Raw material identification as per IS 6746 , IS 11551 Physical shot calculations of puff injection between FRP skin

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Non Conductive & Non Magnetic Highly Durable Lower thermal conductivity Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Sturdy and Structurally Stable Economical & cost effective TECHNICAL SPECIFICATION Our FRP Profiles having a wide range of applications and sizes like I-Beams, Channel, Angle, Square Box, Rectangular Box, Round Pipe, Flats, etc. as per customer requirements DESIGN STANDARDS ASTM D 3917-96 SIZE As per customer requirements MATERIAL OF CONSTRUCTION FRP Pultruded Sections with Polyester Grade Resin composition with Fiberglass QUALITY SPECIFICATIONS As per ASTM D 3917-96

SALIENT FEATURES Light weight and long service life Excellent resistance against corrosive material Precision Joining Mechanisms Available Mechanical Key Locking Joint System Selection of compatible Resin based on application & Capability to sustain high pressure and buckling Flexibility of modification within a short duration Superior hydraulic characteristics Easy installation Fast execution & Completion of projects in time TECHNICAL SPECIFICATION DESIGN STANDARDS As per customer specifications SIZE Up to 3000mm diameter and 3 to 6 meter length MATERIAL OF CONSTRUCTION Polyester Resin Vinyl Ester Resin Superior Grade Vinyl Ester Resin Isophthalic Resin Epoxy Resin Fiberglass QUALITY SPECIFICATIONS As per customer specifications

SALIENT FEATURES High Corrosion & Weather Resistance Light in Weight Low cost of Installation Easy of Assembly Maintenance Free, Eco Friendly and Durable Large view glasses are possible to fix with the Insulated panel doors without any extra support High Bending Strength Available in any color as per requirement TECHNICAL SPECIFICATION TYPE Conical Type Pole (With Filament Winding Process) Cylindrical Type pole (With Pultrusion Process) POLE ACCESSORIES Junction Boxes (Internal or External) Brackets (Single Arm or Double Arm with Length of 1000mm/1500mm/2000mm) With base plate or Burial Type DESIGN STANDARDS As per ANSI C 136.20 - 1990 BS EN 40 - 7:200 AASHTO LTS-2 1985 IS 875 Part 3 - 1987 SIZE Conical Type With Filament Winding Length: 4 meters to 13 meters Base OD: Min. 143mm - Max. 315mm Top OD: 105mm Cylindrical Type With Pultruded Round Profile Length: Max. 4 meters OD: 75mm & 100mm MATERIAL OF CONSTRUCTION Polyester Grade Resin with Fiberglass QUALITY SPECIFICATIONS As per ANSI C 136.20 - 1990 BS EN 40 - 7:200 AASHTO LTS-2 1985

Corrosion Resistance No need for linings, coatings, cathodic protection, wraps or other forms of additional corrosion Light in weight, Hence low transport costs Eliminates need for expensive handling equipment Standard length up to 12 meter, Hence fewer joints reduce installation time Extremely smooth inner bore, Hence low friction loss in pipelines means less pumping energy needs and lower operating costs High Resistance to Surge Pressure Low Thermal Conductivity UV Resistance Better Hydraulic Efficiency Low maintenance cost TECHNICAL SPECIFICATION Our pipes, fittings and liners are ID based and cover a wide range of applications and sizes. DESIGN STANDARDS DN - Diameters from 25 mm to 3000 mm Major Design Standards: API 15LR, ASTMD 2992, AWWA M45, ASTMD 2996, IS0 14692, ASME B 31.3 CLASS PN - Pressure Classes 3, 6, 9, 12 & 15 Bar. Availability of higher pressure classes on request upto 70 Bar SN - Stiffness Classes 62, 124, 248 & 496 kPa. Availability of higher stiffness classes on request SIZE L - Length from 2 mtrs to 12 mtrs MATERIAL OF CONSTRUCTION Epoxy Resin Fiberglass QUALITY SPECIFICATIONS As per AWWA Specifications: AWWA C 950 For High Pressure Applications: ASTM D 2996 For Hydrostatic Design Base: ASTM D 2992 For Oil & Petroleum Sector: API 15 LR up to 1000 PSI

SALIENT FEATURES Good Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Lower thermal conductivity Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our FRP Fan Stack having a wide range of applications and sizes. DESIGN Type : As per customer specifications Size : As per customer requirements MATERIAL OF CONSTRUCTION FRP Moulded using Polyester Grade Resin with Fiberglass QUALITY SPECIFICATIONS Qualification as per Customer specifications