The Acoustic Room Treatment System has well-designed panel, stuffing, ventilation, and doors. The wall panels of the Acoustic Room Treatment System are made of prefabricated tiles of 700 mm 1100 mm to suit all wall conditions. Additionally, the tiles are pre-filled and placed on the wall for direct fitment. The thickness of the tiles is about 0.6 mm GI and the perforations are of 3 mm diameter holes with 8 mm pitch. The perforated open area shall not be less than 40% for maximum absorption of sound levels and all engine frequencies. Further, the stuffing of our products is of 50 mm thick and made of mineral wool and 25mm thick of glass fiber wool. It is of 48 Kg density per cubic meter and 24 Kg density per cubic meter, respectively. Our stuffing works as the media or the absorption media of sound. For protection of the Acoustic Room Treatment System, we offer protective film like fiber glass tissue paper, which is made of fine glass fiber. It is bonded with resin bonds and compressed to formulate a smooth and sturdy, fine, porous, and protective layer. We also offer ventilation axial flow fans, which are six aero foil blades casted out of Aluminum LM 6 Grade. These are robust and sturdy to replenish the air on a regular basis and ensure that the engine does not over heat or does not starve from aspirating air for the burning of its fuel. Apart from this, our products are incorporated with 100 mm thick doors. These are fabricated from mild steel of 2mm thickness and are coated with epoxy paint to provide a uniform weather protection.