We are a renowned Supplier of Servo Adon Petrol Additive from Kerala, India. We have strong and close associations with the named manufacturers and bring to you quality checked collection of Servo Adon Petrol Additive. It is efficient in reducing petrol consumption and improving drive ability. In addition to this, it reduces smoke emissions as well. Be it small order or bulk, we make sure that they are timely and safely delivered.

PROBLEMS OF INCOMPLETE COMBUSTION

• Typical effect on emissions due to deposits is an increase in CO emissions by about 50% and in HC by about 120%. Removal of deposits on intake valves reduces CO emissions by 1%, HC by 33% and NOx by 21%.

SOLUTION TO PROBLEMS OF IMCOMPETE COMBUSTION

• A technically correct and most cost effective option to overcome all problems caused by deposits is the use of multifunctional additives like SERVO ADON P.

• The additive SERVO ADON P is a fifth generation additive which provides 'CLEAN UP' and 'KEEP CLEAN' performance in injectors, intake valve and combustion chamber.

• It is further formation of additive which reduces combustion chamber deposits and threrby reducing ORI (Octane Requirement Increase).

• It consists of low molecular weight polyamides - nitrogenous and hydrocarbon compounds and polyether in a mixture of an aromatic solvent and synthetic oil.

• It is a unique combination of two different Polyamine molecules with synergistic effect, which provides great flexibility in formulation with a guaranteed 20% more efficacy for the same dosage or 20% greater cost effectiveness.

BENEFITS OF SERVO ADON P

• Regular use of SERVO ADON P will give the following benefits:

• Reduces Intake valve and manifold deposits by more than 60% on an average

• Removes Carburetor and Injector deposits and keeps entire fuel system clean

• Reduces fuel consumption by 4 to 5 %

• Reduces smoke emissions - CO by 50 % and unburnt HC by 20%

• Improves vehicle driveability

• Protects fuel system against corrosion

• Reduces maintenance costs

SERVO ADON P APPROVALS / RECOMMENDATIONS

• The Ministry of Industries, France has certified that the use of this additive does not do any harm to the engine and environment. This certification is a mandatory legal requirement in Europe. It is a totally ashless product and does not contain any metallic constituents.

• Automobile Manufacturers’ association, U.K. has approved TOTAL gasoline additive to meet all technical requirements of gasoline with a dosage of 750 ppm.

• SERVO ADON P meets the following requirements:

• Carburettor cleanliness-merit rating of 8 on Renault 5 engine with CEC F-03-T-81 method with any subsequent revision.

• Injector cleanliness on Puegeot 205 GTI engine with IFP method allowing a maximum of 2% Flow rate reduction.

• Intake valve cleanliness on Opel Kadett engine-merit rating of 9 with CRC method. Also for Valve cleanliness (Keep Clean) on M102E engine with DKA19 method the average valve deposits less than 25mg. Similarly for Clean up with the same method a minimum of 10% average reduction in deposits per valve.

SERVO ADON P DOSAGE

• A regular dosage of 1000 ppm or 1ml per litre of petrol is recommended. Regular usage will give optimum benefit.

SERVO ADON P PACKING

• SERVO ADON P is available in 5ml, 20ml and 100 ml pouch packing.

SERVO ADON P ECONOMICS

• At the regular dosage of 1000 ppm, the cost of the additive will be about 1.8 % of the fuel cost. With the possible gross savings of 4 - 5 %, the net saving will be of the order of 2 to 3 %.

AC 2010 Fuel Additive effectively cleans fuel system and also increases the mileage of the vehicle. We share glorious credentials in the list of top Suppliers of AC 2010 Fuel Additive. It is sourced from the reputed sources of the market. When it comes to delivery, we make all arrangements for quick shipment of AC 2010 Fuel Additive. It can be obtained from us at the best market price.

• New generation additive based on TOTAL’s research in its premium fuel program

• TOTAL offers its premium fuel Excellium with an assurance of 4% fuel saving supported by a money back guarantee if saving not realized

• AC2010A is based on the same technology as additives used in Excellium

• Prime benefit of AC2010A to the end user is fuel economy. 6% fuel saving is a realistic expectation

AC 2010A COMPONENTS

• Detergent

• A high quality detergent is incorporated in AC2010A. Far superior to detergents available in earlier generation additives.

• In a diesel engine some amount of “fouling” of injectors is inevitable.

• Fouling refers to formation of deposits on injector seats and nozzles.

• Fouling results in loss of atomization quality. Atomization refers to the process of forming very fine droplets of diesel as it is injected into the combustion chamber.

• If the injectors are fouled the atomization will suffer. Instead of fine droplets coarser droplets will be formed. These coarser take longer to vaporize, mix with air and burn.

• The time the fuel has to burn in the diesel engine’s combustion chamber is very limited – typically less than 1/100th of a second or less. Poor atomization will result, therefore, in delayed and incomplete combustion. This, in turn, is detrimental to fuel economy.

• The detergent in the additive serves to clean injectors. Sustained additive use ensures that cleanliness is sustained. Clean injectors imply that fuel efficiency lost due to injector fouling is restored.

• The effectiveness of detergency is measured by a standard test – the XUD 9 test. In this procedure the fuel under test is passed through the injector under standard conditions and the loss in the flow area is measured. The loss in flow area is a measure of the fouling characteristics of the fuel. Typically in this test untreated diesel will give a flow loss of 85%. Diesel treated with earlier generation additives will result in a flow loss of the order of 60%. AC2010A treated fuel will result in flow losses of less than 30%, clearly establishing the additive’s superior detergency.

• Cetane Improver

• In a diesel engine the fuel ignites on its own because of the high temperature in the combustion chamber. The self ignition quality of the diesel is measured by the cetane number. The higher the cetane number the better the fuel’s self ignition property.

• If the cetane number of the diesel is lower than what the engine is designed for there will be a greater an optimum delay in diesel ignition. Given the very short time available for combustion this ignition delay will result in incomplete combustion and, as a consequence, loss of fuel efficiency.

• The cetane number of Indian diesel is 51 minimum under the Bharath III specifications. By contrast the International Harmonized Fuel Charter calls for a cetane number of 56.

• The AC2010A additive improves the cetane number of diesel by 2 to 3 points. In effect, it upgrades the ignition quality of Indian fuel to near global norms.

• Cetane number enhancement, like detergency, promotes more complete fuel combustion and, as a result, fuel efficiency. Detergency assures clean injectors which in turn ensure that fuel atomization is optimum and vapourization swift. A high cetane number assures quick self ignition. Thus detergency and cetane improvement go hand in hand and complement each other. If for some reason injectors are fouled and atomization compromised the ill effects of this are somewhat mitigated by cetane improvement.

• An enhanced cetane number also provides for swifter cold starts.

• Friction Modifier

• The friction modifier is a unique component in the AC2010A diesel additive.

• The friction modifier helps in reducing frictional losses in the fuel injection pump and the top end of the engine where the lubricant does not reach.

• In modern diesel engines the pressure developed by the pump is considerable, in cases of the order of 1000 bar or more. Thus considerable energy is required to drive the pump and this energy has to be provided by the engine itself. Reduced friction in the pump will result in greater engine energy being available for driving the vehicle.

• The friction modifier contributes to enhanced fuel economy.

• Whereas the fuel economy benefits from detergency take some time to clearly manifest the benefit of the friction modifier is almost immediately discernible.

• In an engine two significant energy losses are due to friction and incomplete combustion. The AC2010A additive helps to mitigate both these losses and therefore substantially reduces fuel consumption for the same work output.

• User experiences emphasise that the performance improvement induced by AC2010A demonstrably surpasses that of any previous generation additive.

BENEFITS OF AC 2010 A
While significantly improved fuel economy (of the order of 6%) is the prime benefit of using AC2010A the additive provides several other major advantages to the user. These include :

• Reduced emissions of carbon dioxide and other pollutants.

• Better vehicle drivability and consequently reduced driver fatigue.

• Reduced engine noise.

• Improved engine power and torque.

FIELD TRIALS

• A number of transporters have used the additive AC2010A and corroborated the fact that the stated advantages, fuel economy in particular, are actually realized in live operating conditions. Reports of fuel economy range from 3% to over 10%. This wide range is clearly because of the degree of variability that exists between commercial trips. The variable factors include vehicle condition, vehicle load, vehicle speed, driving habits, road, traffic and weather conditions etc.

An objective assessment clearly requires a carefully monitored test in real life conditions with systematic observation of variable factors.

ICAT FLEET TRIAL

• TOTAL organized a comprehensive field trial to establish the fuel economy benefit of AC2010A the using the services of ICAT (International Centre for Automotive Technology), Manesar, Haryana.

• ICAT is a Government of India organization charged with the responsibility of certifying vehicles for safety, emission and fuel economy standards.

• The ICAT study involved 11 trucks with a consistent operating pattern.

• During the three month study, to the maximum extent possible, the driver of a truck was not changed to assure consistency in driving habits. The truck operations involved picking up loads of cement from factories in Rajasthan and transporting these to Gurgaon or Delhi. On the return leg the trucks traveled unladen.

• During the study each truck ran approximately 4000 kms without additive to establish the base level performance criterion. Subsequently each truck ran approximately 8000 kms with additive.

• ICAT measured the fuel economy on the basis of tonne kms per litre. This is the internationally accepted norm for measuring energy efficiency in the transportation sector.

• ICAT has reported that use of the additive AC2010A has induced fuel economy benefits to the extent of 6.28%.

AC 2010A DOSAGE

• The additive is to be used at a dosage of 1000 ppm (parts per million) i.e. 1 litre additive to 1000 litres fuel.

AC 2010A PACKING

• Currently the additive is available for retail in 100 ml, 250 ml and 1 litre packing

AC 2010A AVAILABILITY

• The additive is available at the offices of Neo Petcon and through dealers and distributors located in different parts of India. Please see attached distributor/dealer list.