Faco Automation Mumbai, Maharashtra

Decoiler Machines Faco Automation Offers Decoiler machine with robust design and best finish. The machine is designed to unwind the metal wires or strips that is being used in engineering and non engineering applications in the coil form. Common facts: Decoilers are used in press shops and other engineering applications where in the sheets are wires in the form of coil is being unwound in a mechanized way to feed the same to the next stage. In general, for a press shop application, Decoiler , straightening machine, strip feeder, Power press and coilers are used in the same sequence as explained here. Construction: The machine is suitable for synchronizing with wire feeder or strip feeder. Synchronization will enable the machine to start unwinding the machine when there is consumption of material in the process. Otherwise the unwinding activity is stopped. It is a heavy construction by design to sustain the load of the material in the form of coil. The construction consist of three wings with adjustable jaws(either mechanized or manual). The unwinding action takes while the motor and gear box cranks the wings. Center of gravity is taken care in the design. Heavy duty bearing are used to have long life. Machine is fully Powder coated. Most of the components are formed section that ready made section. All moving parts are hardened wherever needed. The rotation is controlled by a limit switch or a wire with no potential supply to enable or disable the unwinding action with reference to the consumption of the material. The equipment and the covers are fully protected from getting corroded by means of zinc blue blackgreen and powder coating. Applications: De coiling application in engineering and non engineering industry. Contact details Unit I: Faco automation, 10 a, raja street, Ganapathy post, Coimbatore. pin: 641 006. India. Unit: II Faco Automation, 111, Avarampalayam road, Korai thottam, Ganapathy, Coimbatore 641006 Unit III Faco Automation, A1-83, Vijaykar Wadi, Bomgude Compound, S V Road, Near New Era Theatre, Malad (W), Mumbai 400064 Mobile: +91-09325502014 and +91-09833132727Contact Person: B Rajkumar, Chief Executive Officer. Mobile: +91-09363260349 Assistant Manager –Automation Products Mobile: +91-09324291298 Chief Engineer and Plant In charge Mobile: +91-09322623834 Assistant Technician – Automation Products Phone: +91-22-28886163 Mumbai Plant Email: info@facoautomation.com Web: www.facoautomation.com

Strip Straightening Machines Faco Automation Offers strip straightening machine for sheets and for Wires and profile rods in medium range. The machine is designed to straighten the metal strips that is being used in engineering and non engineering applications. Common facts: Strip straightner and Wire straightner are two different concept. The former one is used for sheet metals where as the later one is used for rods and profiles in various forms. Strip and wire straightner are most important to create flawless jobs where accuracy and quality is highly expected in precision manner. Construction: The machine is suitable for synchronizing with strip feeder, power press and pneumatic presses. It is a heavy construction by design to sustain the stress levels while it remove the bends in the sheets. The construction consist of the Ground hardened and hard chrome coated bottom set and top set of rollers. The bottom rollers are mutually linked by gears driven by a main drive motor through gear box. There are totally one set of feed rollers which is used for feeding the sheets. Top rollers are individually adjustable to adjust and improve the straightness. The rollers are adjustable as a set of gang. The equipment and the covers are fully protected from getting corroded by means of zinc blue /black/green and powder coating. Applications: Sheet metal and wire straightening both ferrous and non ferrous grades. FACO AUTOMATION A-26A, Ghatkopar Industrial Estate, Agra Road Industrial premises cooperative societies limited, Off LBS Marg, Ghatkopar West Mumbai 400076 Tele Fax +91-022-25003344/ Mobile : +91-09324291298 www.youtube.com/user/facoautomation www.facoautomation.com

Cut to length plant: This is a straightening cum cut to length plant for Steel sheets. The capacity of this machine is up to the width of 125 mm and thickness of 3 mm and material of Stainless steel, brass, copper, tin, Mild steel, aluminium etc. This plant has got new low cost technology From Faco Automation in each stage of the machine. The machine is built and developed from concept to commissioning by Faco Automation. This machine has got sensor and brake technology for the cut to length module of this machine. We have no limitation of cutting in terms of length up to 99, 999mm. Meaning indefinitely adjustable from 0, 5mm till 99, 999 mm. The accuracy of cutting is +- 0, 5 in case of lower models where accuracy of cutting is not needed much. We have accuracy up to +- 0, 05 mm The special feature of this machine is speed of process adjustable. The machine has got special cutting blades to enable cutting till Stainless steel grade. The machine has got pneumatic cutting machine inbuilt hence consume low power compare to conventional technologies. But we need a compressor to run this machine. Compressor capacity is up to 3 HP. Built it pressure sensors enabling the machine to stop when compressed air pressure is not sufficient. WelCome to Faco Automation to build new Generation Machines...